The Body Armor HiLine was 37 lbs and a little more than 17 lbs was removed from the truck . Installed by myself in 2 hours. I paid $540 with shipping from Morris 4x4 about 2 years ago. It was the only bumper that had everything I needed. The most bang for the buck on my truck of all my mods. Good choice.
I’m surprised you’re looking at doing this considering all the videos you’ve made discussing how dealerships hate mods when you trade - I mean, how many times have you had to de-mod your truck ( we’ve all lost count!). You do this, you can’t go back because of the cuts. So, with that said, I’m in favor of the first one you talked about since you’re going to do it. It’s less invasive & I think it looks awesome!
Of the three, I liked the first one as well. It just looked like it should be on a Tacoma. I like the low bar it has, could mount some things on there.
Rob in my opinion the first one tou showed looked like the nicest one the price is reasonable and it requires the least amount of cutting and it looks really nice on the truck
When I added the Body armor bumper and warn 10S winch my front end went down 1/2 inch. was level before bumper winch install on a 21 pro with Westcott fox lift kit. The High Line looks great on the Tacoma and works with the TRD skid plate.
Fab fours is a great bumper and has saved my truck from a bad driver already. I have the premium bumper(winch ready and stronger). The only trimming required was the finder flares and the plastic wheel liners. With the TRD pro grill the tss is working great
I did the Body Armor Hiline with a 20” light bar and a Warn winch. It looks great and fits so well that it looks factory. And does not mess with the sensors. I couldn’t figure out how to upload a picture or I would have.
My truck is about done. I need to figure out what front suspension I want for 2" with added weight. Anyway, I'm in a 2017 OR 4x4. I have a Ranchhand push bar. Roughly 125lbs cost me 3/4 to 1" between tire to fender.
With the Rhino I don’t think you need fog lights if you have that big light bar. So first or third. Maybe look for and LED bar if you go for the first one. Good luck
I'm just looking for bumper to protect my truck Some of these bumpers look nice but give zero protection when getting into a accident Looking at you Fab4
If you ever come to eastern NC you can drive and review my 2017 Tacoma OFF Road on and off road. You need new content and should go on the road and meet your sub’s and their Tacomas.
Of those 3 … I’d go #3. Can drill a couple holes in top to mount lights. #1 isn’t really a bumper, just leave the plastic bumper cover. Yeah that was rude, sorry. We have big herbivores down here, bigger is better. Nilgai can be several hundred pounds.
Aloha and 👍 evening 🌚 Rob. The modding for your front bumper will look 👀 awesome, but when the time comes to trading in for the new Tacoma as mods need to be removed. For now, lets see how this works out. Great video 📼 Rob.🤜🤛😄🤓💰😇🤠😎⛅🏡👍🎓📼🔍🔅🌟🙌👐🤲👀💪🐶🐕🤙
The Body Armor HiLine was 37 lbs and a little more than 17 lbs was removed from the truck . Installed by myself in 2 hours. I paid $540 with shipping from Morris 4x4 about 2 years ago. It was the only bumper that had everything I needed. The most bang for the buck on my truck of all my mods. Good choice.
Thanks for the info 👍👍
Thats what Im looking at!
I’m surprised you’re looking at doing this considering all the videos you’ve made discussing how dealerships hate mods when you trade - I mean, how many times have you had to de-mod your truck ( we’ve all lost count!). You do this, you can’t go back because of the cuts. So, with that said, I’m in favor of the first one you talked about since you’re going to do it. It’s less invasive & I think it looks awesome!
Time for a change👍
@@RobMotive nothing wrong with that! Look forward to it
Liked them all but I could not choose one real fast. I do think the first one is probably the best deal.
Of the three, I liked the first one as well. It just looked like it should be on a Tacoma. I like the low bar it has, could mount some things on there.
Rob you don't need a after Market bumper. For the show yes but will it pay it's way? I don't think so
Now where’s the fun in that😬
Rob in my opinion the first one tou showed looked like the nicest one the price is reasonable and it requires the least amount of cutting and it looks really nice on the truck
When I added the Body armor bumper and warn 10S winch my front end went down 1/2 inch. was level before bumper winch install on a 21 pro with Westcott fox lift kit. The High Line looks great on the Tacoma and works with the TRD skid plate.
Saw your pic. Looks good👍
Rob the first one is a great choice. Are you considering one for the back?
Not sure about the back? But I would like them to match👍
Fab fours is a great bumper and has saved my truck from a bad driver already. I have the premium bumper(winch ready and stronger). The only trimming required was the finder flares and the plastic wheel liners. With the TRD pro grill the tss is working great
Also I got mine used for $650 just needed some paint
Not bad👍👍
I did the Body Armor Hiline with a 20” light bar and a Warn winch. It looks great and fits so well that it looks factory. And does not mess with the sensors. I couldn’t figure out how to upload a picture or I would have.
I have the BA on my 21. Great choice!
My truck is about done. I need to figure out what front suspension I want for 2" with added weight. Anyway, I'm in a 2017 OR 4x4. I have a Ranchhand push bar. Roughly 125lbs cost me 3/4 to 1" between tire to fender.
Definitely something to figure in before you commit👍
I actually got that first one saved on my wishlist for later down the line.
The first one is the best in my opinion!
With the Rhino I don’t think you need fog lights if you have that big light bar. So first or third. Maybe look for and LED bar if you go for the first one. Good luck
#1 IMHO would be the right choice, looks damn good too
I do like that one🤔
I'm just looking for bumper to protect my truck
Some of these bumpers look nice but give zero protection when getting into a accident
Looking at you Fab4
Yeah I like the first one like you picked they're not massive the other ones are just a little too big more for Tundras
Howdy Rob, I knew you were going to pick the first one 😂 , I would go with that one too 👍🏽👍🏽👍🏽 be safe out there, take care
Of the three that you showed I'm going with the first one I like it alot
I’d have to agree with the 1st option bumper. Sometimes less is more no doubt. Good luck 👍🏼 ✌🏼🇺🇸
If you ever come to eastern NC you can drive and review my 2017 Tacoma OFF Road on and off road. You need new content and should go on the road and meet your sub’s and their Tacomas.
Rob, can your Bilstein shocks be adjusted to compensate for the weight of any of these bumpers?
I have a little left😬
Rob you can't you just turn off the TSS and just use traditional cruise control?
No way to completely disable it (without errors) that I’m aware of🤔
I have the body armor high line bumper and love it. Great bumper
Also have the body armor pro series rear bumper to go with it as well and again real good bumper with a more budget friendly cost
Just get a coastal offroad bumper, best on the market, plus you make it yourself and feel good about it.....
Too big for me I think🤔
I got the center bumper from mainline overland and a warn evo 10s for just over 2k and looking to get a 30”light bar from baja design in amber
Of those 3 … I’d go #3. Can drill a couple holes in top to mount lights. #1 isn’t really a bumper, just leave the plastic bumper cover. Yeah that was rude, sorry. We have big herbivores down here, bigger is better. Nilgai can be several hundred pounds.
Lol!!😁
When r we gonna see the taco?
Soon👍
Aloha and 👍 evening 🌚 Rob. The modding for your front bumper will look 👀 awesome, but when the time comes to trading in for the new Tacoma as mods need to be removed. For now, lets see how this works out. Great video 📼 Rob.🤜🤛😄🤓💰😇🤠😎⛅🏡👍🎓📼🔍🔅🌟🙌👐🤲👀💪🐶🐕🤙
Go slimline design..