ULTIMATE FIX any Dead Stuck Pixel - "SUPERNOVA" edition MK3 - 60FPS 4K HD - 1 HOUR LONG
HTML-код
- Опубликовано: 11 сен 2024
- "Supernova" MK3 edition - TRUE 4K Super HD Dead Pixel Fixer - IDP Film Studio Software - v.11.00.02B ( MK3 )
QUAD CORE Running Power at full 4K HD
** Note: unlike others we have 180,233 different flotation points with complete spectrum to eliminate dead pixels within this program. **
EACH 1 Second has 24 different color spectrum's in using the WHOLE GAMMA SPECTRUM.
TRUE 4K Super HD Dead Pixel Fixer - software produced by
IDP-Film & uploaded to 4096 x 2160 TRUE 4K S-UHD
1 HOUR Version SEIZURE WARNING - read description below DO NOT WATCH THE SCREEN - while running the program !
*** THE SOUND PROVIDES INFO THAT THE PROGRAM IS RUNNING - WITHOUT END USER TO KEEP LOOKING AT THE SCREEN ***
DO NOT LOOK AT THE SCREEN - Listen to the Audio so you know its running !
Program produced for our Studio Cinema Displays at the Studios run this program at 4K HD FILE SIZE: 4096 x 2160 TOTAL UPLOAD - SIZE 48.12GB - 4K S-UHD on RUclips Note: unlike others we have total 180,233 different flotation points with complete spectrum to eliminate dead pixels within this program.
Do you have dead or stuck pixels on your laptop screen or retina display or TV ? Keep replaying this video until the dead pixel or stuck pixel has been repaired/unstuck.
This video fixed the stuck pixels on my Large TV and also Macbook Pro's Retina display, be warned it can take hours depending on the pixel.
If this method doesn't work for you, Google the pen tip pixel method or contact the manufacturer of your display.
This video should also work on
Smart Phones
iPhone
iPad and tablets as well
LCD Displays
Plasma Displays
Commercial Televisions
Computer Screens
**Seizure warning ***
**Seizure warning ***
**Seizure warning ***
**Seizure warning ***
DO NOT WATCH THE SCREEN !
DO NOT WATCH THE SCREEN !
DO NOT WATCH THE SCREEN !
Turn the screen away from you, if using a mobile device leave it face down and allow the video to run to the end, repeat the video if necessary.
You run the program at your own risk - you have been told not to look at the screen.
If this does not work contact the manufacturer of your display - you may need to replace the screen: the screen may have a life-span of a few years and every display maybe different.
WE HOPE OUR PROGRAM WILL HELP OTHERS OUT -
Best of luck and we hope your fix it.
.
.
It WORKED!!
Owner of a Sony 75" 940e 4K TV. TV is a full-array local-dimming television. Got a "stuck" white pixel in the top left corner that was very annoying. I ran this program all the way to the end then turned off the TV for a few minutes to let it cool down, powered it up again and stuck pixel is gone. Thank you much for putting this program together!
Hey John Doe-
Yes it will work and we are pleased we have helped another user to fix the Dreaded Dead Pixel.
Just remember that any new purchased TV monitor or computer screen CAN HAVE Dead Pixels on arrival -
You have to remember Dead Pixels can happen on even a NEW SCREEN - manufactures state that if only less then 10% of the actual pixels then this is normal ! -
gone are the days of the Good Old Plasma Screen Technology which as you will remember cost anything from £2K to £6K and they were stunning - screens or monitors now are built on price - unless the end consumer spends a shed load of money then the manufactures want screens / monitors to last about 2 years - that said I think you will agree you can buy a screen for a little as £65.00 ! - enough said.
Things we suggest you do when running this software to try to mend long term Dead Pixels that have been their ages:
One of the best things you can do - is put a towel or cloth over the front of the screen ( keeping all the air ventilation holes at the rear unblocked - DO NOT COVER THESE UP ) - and run the program.
Ensure you are running at true 4K or 5K HD - that said some computer systems running from a ISP router will down grade and run at a mere 1080P - If you are streaming from your router DIRECT to the TV monitor then you should get 4K or 5K HD.
This you can tell by looking closely at the screen. Things should be VERY SHARP & CRISP- as in Blu-Ray or a HD Blu-ray disc.
Its worth checking the above in detail before running.
Now its worth noting our "SUPERNOVA" edition MK3 - ULTIMATE FIX should fix Dead Stuck Pixels is the NEW version released.
This MK3 SUPERNOVA has double the amount of data in the program - both should sort out the problem but the MK3 is a cut above the rest.
That said - it will depend on how long the faults or glitch has been present in the screen - dead pixels can grow to adjacent units - the cure is to see them and so something about them as soon as possible. We have tried our hardest with what we know and put it all together in these 2 programs - they are free to use after all.
As you can see with other peoples comments - they can work and do - you just have to persevere - when you have run the program say over a week at different intervals - run a high quality Blu-Ray through the system - ensure you have a good quality HDMI input to obtain the highest quality data input.
1) DARK DOT DEFECTS on a screen or monitor:
A Dark dot defect is usually caused by a transistor in the transparent electrode layer that is stuck "on" for TN panels or "off" for MVA/PVA and IPS panels. In that state, the transistor places the liquid crystal material in such a way that no light ever passes through to the RGB layer of the display.
2) BRIGHT DOT DEFECTS on a screen or monitor: Hundreds of hot pixels appear in a 32-minute long exposure photograph taken in virtual darkness.
Note: These must be viewed at full size in order to see them A bright dot defect is a group of 3 sub-pixels (one pixel) all of whose transistors are "off" for TN panels or stuck "on" for MVA/PVA panels. This allows all light to pass through to the RGB layer, creating a bright white pixel that is always on. This is commonly known in the industry as a "hot pixel".
3) PARTIAL SUB-PIXEL DEFECTS on a screen or monitor:
A partial sub-pixel defect is a manufacturing defect in which the RGB film layer was not cut properly.
4) TAPE AUTOMATED BONDING (TAB) faults:
A TAB fault is caused by a connection failure from the TAB that connects the transparent electrode layers to the video driver board of an LCD. It is worth noting: TAB is one of several methods employed in the LCD-manufacturing process to electrically connect hundreds of signal paths going to the rows and columns of electrodes in layer 6 (the transparent electrode layer) in the LCD to the video IC's on the driver board that drives these electrodes. If an LCD is subjected to physical shock, this could cause one or more TAB connections to fail inside the display. This failure is often caused by horizontally flexing the chassis (e.g., while wall-mounting or transporting a display face up/down) or simple failure of the adhesive holding the TAB against the glass. TAB faults require replacement of the LCD module itself. If these connections were to fail, the effect would be that an entire row or column of pixels would fail to activate. This causes a horizontal or vertical black line to appear on the display while the rest of the display would appear normal. The horizontal failure runs from edge-to-edge; the vertical failure runs from top-to-bottom.
5) COLD START:
The Cold start Commonly called a cold start fault, another type of TAB failure shows up when the display has been turned off long enough for the LCD to cool down or shrink enough so the bond is in open circuit. This fault is often seen as a ghosting double, or triple, image on one side of the display, with shadowing or dulling of the other part of the screen. A common test for this problem is to use a 50% and a 75% grey test signal. The fault often disappears as the LCD sheet heats up and expands into the frame; flexing the TV when this is happening will immediately reveal if this is a TAB fault. Cold start TAB faults tend to get worse, as the regular heating and cooling of the bond, from powering the display on and off, causes further cracking. Hardware manufacturers and distributors tend to claim that TAB faults, as opposed to other physical defects that may be found in an LCD, do not allow for repair.
6) STUCK SUB-PIXELS:
A stuck sub-pixel is a pixel that is always "on". This is usually caused by a transistor that is not getting any power, and is therefore continuously allowing light at that point to pass through to the RGB layer. This means that any given pixel will stay red, blue, or green, and will not change when attempting to display an image. These pixels may only show up using certain applications, or they may be on all of the time.
7) STUCK VERSUS DEAD PIXELS:
These are often incorrectly referred to as "Dead Pixels", which have a similar appearance. In a Dead Pixel, all three sub-pixels are permanently off, producing a pixel which is permanently black. Dead pixels can result from similar manufacturing anomalies as stuck pixels, but may also occur from a non-functioning transistor resulting in complete lack of power to the pixel. Dead pixels are much less likely to correct themselves over time or be repaired through any of several popular methods. Stuck pixels, unlike Dead Pixels, have been reported by LCD screen owners to disappear, and there are several popular methods purported to fix them, such as gently rubbing the screen (in an attempt to reset the pixel), cycling the color value of the stuck pixel rapidly (in other words, flashing bright colors on the screen), or simply tolerating the stuck pixel until it disappears (which can take anywhere from a day to years).
What we have tried to produce is a Free Software that will help eliminate any Dead Pixel & Stuck Pixel back into life - over time it will work you just have to follow what we have said.
DO NOT PRESS ON THE SCREEN in any way - damage may result.
REMEMBER new TV / COMPUTER monitors can arrive from the manufactures with a percentage allowed of Dead pixels - they allow for this )
KNOW YOUR FACTS ! - USEFUL Link:
www.tested.com/tech/1337-we-uncover-the-dead-pixel-policies-for-every-major-lcd-maker/
.
I have a 2-inch wide dark patch in the top left corner of my LG LCD TV set which I'd like to use this dead pixel remover on, but problem is: I don't know how to run it on the TV Screen. Please educate me on the process. Thank you.
Jonathan Aghoro get a chrome cast or roku stick
For how long??
@@jonathanaghoro7768 did you fix that dark patch ? If you still haven't got round to it, just connect your pc/laptop (or 'whatever' if unfortunate enough to have spent small fortunes on any apple products..sorry, lol...but connect to your tv with HDMI leads) and then simply play youtube through your telly
Brilliant I had a few dead pixels on my Samsung Galaxy J8 on the top edge - just ran this and they have gone - THANK YOU THANK YOU THANK YOU AMAZED !
How long do you ran✋🏻
This worked for me. Thank you!
Laptop suddenly retained a ghost image. Screen was flickering as a result, and I couldn't get rid of it. Played this video for 3 hours. It sowly got better and eventually resolved.
It worked!! I had a green stuck on pixel on lg oled 55 and after 2 hours of running this video it disappeared.
Thank you!
I have the same a green pixel on a B8 OLED TV but have run this and others and it hasn't worked. If the TV goes on standby its also visible every is black apart from them one pixel in the middle of the screen
Did your stuck pixel return by any chance?
Is this an improved version of your stuck pixel video from 5 years ago?
Try a few IDP Films videos. Sometimes you can revive a white pixel but they are usually dead.
Tip this is a great time to use lens cleaner on your TV screen. The small amount of pressure will this is running will definitely help.
10-30 mins should be all you need. Maybe more. Then it’s a good idea to let the TV cool off. This is good preventative maintenance as well.
I can't believe this actually worked. No Joke. It fixed my screen. Thank you so much!
I dont really comment on yt but
I just tried this 3 hours ago, my phone is oppoF5 and I play this video while im sleeping in 1 hour.
I waked up becausd of alarm then I check it out and believe me guys this really works, it helps to fix the screen discoloration of phone.
The discoloration doesnt appear anymore, maybe there is but its too little and unnoticeable unlike before which is really worst.
Thankyou verymuchhhhh to whoever did this video😇.
really worked for me guy
Fixed some pink pixels stuck on my screen. Thanks
IT WORKERD!!!!!!
THANK YOU MY GUY!!!!!
man my new monitor got one red and 3 green ones, did wait around 1 hour and not fixed,
how was your problem ? i mean number of stuck pixels and their color ?
how much did you waited ?
i'm just stressed cuz i just bought my monitor few days ago -_-
IT WORKED FOR MY ASUS TUF LAPTOP, THANK YOU SO MUCH!!!!!
Does it actually work? I left mine for half an hour and the stuck pixels are still there
THANK YOU SOOOO MUCH!!! i was soo pissed that my acer monitor came with 2 stuck pixels and now they are gone i let the video run for a whole hour and even after it didnt work but i thought "oh maybe the screen needs to rest for whatever reason lol" i just came back from school and both red pixels are gone TY while gaming you don't really notice but when your're scrolling through twitter or watching twitch you really notice it and it becomes an eye sore TY!!
Did you leave it resting on or off and for how long?
Thanks! Worked for a stick green pixel on my 900h
Will this work on monitors? And also will it work on black dead pixels?
Hi IDP Film Team,
Thank so much for putting this amazing technology together!
I'd also like to thank you for answering so many questions. That's very generous of you.
I have learned a lot from reading your replies to other's comments. (Run this video straight from RUclips in 4k -- not any other resolution, put a cloth over your screen, let the monitor cool down for 25 - 60 minutes after running the video, etc.)
I have two questions if I may regarding some nasty black pixle clusters (25+ dead pixels per cluster) on my '15-inch Retina Macbook Pro'.
#1: Should I run this video at 'Default for Display' (1440 x 900) or at a 'Scaled' resolution? The following options are available on my 15-inch Retina Macbook Pro: 1024 x 640, 1280 x 800, 1440 x 900 (default), 1680 x 1050, 1920 x 1200.
#2: What about the black borders on top and bottom of this video in full screen mode on RUclips? Does this matter? If so, how does one get rid of these borders?
I hope you can help me answer these questions, I'd be very grateful to receive any clarification.
Thanks!
A.E.
A.E.
1) Thank you for the kind words - we appreciate your time in writing in - Yes we like to help others where we can
2) You mention 15inc Retina macBook Pro - nice machine.
That said we strongly suggest you run this at the HIGHEST Resolution as possible - 1920 x 1200 is the highest that your apple graphics card will take - What we would do is plug your screen into ANOTHER SOURCE that can push the pixels and we mean push the pixels - think of your 15inch screen as only as a DISPLAY MONITOR and by pass the Apple Graphics card !
3) The black borders you mention - SHOULD NOT BE THERE & WILL NOT BE THERE If you have the graphics card & screen resolution set up correctly - all displays are 16:9 / 16:10
Ideal resolutions are as follows:
1024×576, 1152×648, 1280×720, 1366×768, 1600×900, 1920×1080, 2560×1440 of course the best being: 3840×2160.
Now it is worth noting:
Around Summer 2006 most computer monitors for the general public had a 4:3 aspect ratio very few had some at 5:4 but this was very small to find and not good !Around late 2006 and 2007 period, monitors with the 16:9 and mostly 16:10 ( 8:5 ) aspect ratios became commonly available in computer laptops then later also in single monitors stand alone computers !
Late in 2008 the brilliant 16:10 became the MOST COMMON SOLD ASPECT RATIO - ALL LCD Displays and the same year 16:10 was the standard for Laptop computers to which Apple in-braced - and the rest is history !
That said around Spring 2008, the computer industry started to move over from 16:10 to 16:9 ratio - 16:9 was here to stay !
The main reasons were:
16:9 provides better a economic cut (panelization) in existing TFT LCD fabrications/design.16:9 products provide wider aspect ratio which was great for the consumer and all game developers !
In March 2011, the 16:9 resolution 1920×1080 became the most common used resolution.
The earlier most common resolution was 1680×1050 (16:10)
As said you should have NO Black panels top or bottom when running our program - if you have the graphics card & screen resolution set up correctly.
Again - you need to push the display to its maximum in order to tease those dead pixels back into life.
REMEMBER - If they have been there a while then perseverance & determination will be required !
We wish you luck A.E. - keep us posted
& Happy New Year to you Fella from all the team
FORGOT - ENSURE YOU ARE RUUNING THE MK3 version:
ruclips.net/video/X71jVGybxb4/видео.html
@@idpfilm Thanks so much for your quick reply and your well wishes! It means a lot.
With SwitchResX I'm able to up the resolution of the screen on my 15-inch Retina Macbook Pro to 3840 - 2400 (16:10). That's the highest available resolution in that program.
Regarding the black bars: SwitchResX also allows one to switch to 16:9 mode (2880 * 1620 and others): That mode creates black bars on top and below the work area. When I put the video in full screen the black bars of the video do disappear (unlike in 16:10 mode). But the positive effect of that is of course mitigated by the black bars the software created.
So I'm not sure how to get rid of those bars in 16:10
(As a side note: This isn't a dual graphics card machine, it only runs the 'Intel Iris Pro' graphics card. Not sure if that matters.)
Regarding the following point:
What we would do is plug your screen into ANOTHER SOURCE that can push the pixels and we mean push the pixels - think of your 15inch screen as only as a DISPLAY MONITOR and by pass the Apple Graphics card !
--> I do apologise but can't make heads or tails out of this. Could you please elaborate a bit what I would need (an external screen?) / how this would work, if possible at all?
Thanks once again for your generosity!
A.E.
our Techie guy suggests that a program such as ours ( and yes there are a few now on the market - some good - some not so good ) he runs it on his own set at home every 4 months -
You have to remember Dead Pixels can happen on even a new screen ! -
manufactures state that if only LESS THAN 10% of the actual pixels then this is NORMAL !!!!!!
- gone are the days of the Plasma Screen which as you will remember cost anything from £2K to £7K and they were stunning - screens or monitors now are built on price ! -
unless the end consumer spends a shed load of money then the manufactures want screens / monitors to last about 2 years - that said, I think you will agree you can buy a screen for a little as £65.00 !!!! - enough said.
To answer your later question - we suggest running it for 2 hours - ( read the other comments we have left folk ) such as a cloth or towel over the front screen to excite the Dead Pixels back into life.
NOTE:
DO NOT COVER UP ANY VENTILATION OR COOLING VENTS - all you are trying to do is make the Front Screen warmer with a cloth over it which will help in your quest.
You mention: ................As a side note: This isn't a dual graphics card machine, it only runs the 'Intel Iris Pro' graphics card. Not sure if that matters. ( end quote )
You do not mention what your Graphics card is on the MacBook Pro ! ( see below )
Quote: What we would do is plug your screen into ANOTHER SOURCE that can push the pixels and we mean push the pixels - think of your 15inch screen as only as a DISPLAY MONITOR and by pass the Apple Graphics card !
In other words link your Display on the 15inch Retina MacBook Pro to a SUPER HUNGRY: Mac PRO 6.1 or even a HIGH END Mac PRO 5.1 with a Graphics card of at least 3GB or 6GB
Now remember these Mac Pro 5.1 - WERE ARE STILL ARE BEASTS !
Apple tried to kill off the Mac Pro 5.1 - but professionls saw what Apple forget - you can BEAST THEM UP MASSIVELY
ie: Graphics card: NVIDIA GeForce GTX 780 3072 MB / Nvidia GeForce GTX 1080 Ti / GTX 750 Ti, 960, 970, 980, 980 Ti, Titan X
The display will only be pushed with a very high end graphics card -
on the subject of Mac Book Pro
MacBook Pro 2.5Ghx dual core Intel i7 with retina
can push out a mind blowing 5120x2880 resolution at 60Hz at over a BILLION colours !
Can & will handle 2 displays with 4096x2304 resolution at 60Hz at millions of colours
using the legendaryThunderbolt 3 digital video output
We wish you luck and we do hope this program help you - one last thing - try to as often as you can to stream a BluRay disc on film - as these run at a high definition this will help also - normal TV programs do not push the processors at all and that's one reason Dead Pixels form.
Wishing you all the best in your quest
.
@@idpfilm Thanks so much for explaining. I get it now. :) (Sadly I don't know anyone with such high end machines but good to learn something nonetheless.)
I'm so sorry about this. I have a MacBookPro 11.2. This model has an Intel Iris Pro 5200 (1536MB) graphics processor that shares memory with the system. It sadly isn't configured with the additional dedicated GeForce GT 750M with 2 GB dedicated GDDR5 video memory.
I have found a way to remove the black bars but am unsure if this method would have a negative effect on the technology.
I have found that you can import (stream) RUclips videos in VLC. So all you do is add the url of this video in VLC. It will then stream the video. Once the video starts streaming you can change the aspect ratio to 16:10. That way there's no more black bars on my MBP screen.
Any thoughts on this method?
Thanks again for your amazing support!
A.E
OML I LOVE YOU THIS WORKED ON MY HUAWEI P30
will this work for stuck pixels on an oled screen?
I got little orange pixels on my screen and They're outside of fullscreen range because I have a wide 4k display and I can't fix them :( EDIT: It got fixed even when it was off screen O_O
Excellent for me! Thank you.
Hello will it work on Sony 65 'inch TV on a blue pixel ? What can I do to unlock ? Thank you
YES this program should do its magic - just remember to read all the comments we have left other users ( see the older MK2 version we have on RUclips )
see: ruclips.net/video/hpeLXoqyiyA/видео.html
also know whats happening:
www.tested.com/tech/1337-we-uncover-the-dead-pixel-policies-for-every-major-lcd-maker/
Does this work on OLED tv as well? It doesn’t say in the description
YEAH !!! , I did it on my LCD pannel , will it give any benifit for LCD
It is work on VA?
fixed my MacBook Pro thank you
Hey I have an LG 43" 4k 6300PLB UK Model (2018) and it has what looks like dark wavy lines at the bottom of the display, you can only see them on light backgrounds very annoying would this work?
Hi ive got little green pixels in the screen, can this video work?
It should technically work
would this work on a hp all in one ?
It should work on everything but i left mine for half an hour and the stuck pixels are still there
Got a new monitor yesterday noticed one pixel seems stuck stays a light blue. Not a no name a Samsung and really it doesn't bother me don't even notice it unless the screen is dark and I'm looking. Gaming I never see it but I'm gonna try this just to see what happens started out almost an hour ago so almost done.
Did it work for you ?
Ensure you read all the comments we have posted for users - they were written on the MK2 version as that one has been running longer.
That said the new MK3 version has more data built into it.
ensure you follow the write ups we have left others on the MK2 version ( ruclips.net/video/hpeLXoqyiyA/видео.html )
i have multiples stuck pixels on my monitor. i have used the cloth and press thing, they disapear but they always back. why?
Did you find a fix?
Thank you very much!!!!
will this fix a pixel that is just blacked out or only struck pixels??
THANK YOU SO MUCH!!!!
Does it work on mobile?
Can this work on Samsung s9 plus
does it work for a vertical line in right of tv????
Did it work?
I have to let the video on for one hour?
it can take hours depending on the pixel.
You just fixed my Google Pixel 3a XL 💖
How do u use it
Awesome! so is it fixed til now!?
I have burn pixels (ghosts) on my phone. Will this will help me? I have Samsung Galaxy S8
It should
this works for hp omen 27 2k165hz? i have a stucked pixel
Hey bro how do you run this? Can you run it through the Xbox or you have to run it through the tv itself or you have to download it?
@@JorgeLopez-xn3ke I have the problem in my monitor so I play the video in my laptop
dont care about your screen, but its a nice one
Can I cast this video to my 4k tv and will it work if I do it that way
Ricky - Ensure you stream from you router direct to the TV - some ISP Routers will down grade the signal to 1080P - a good way of checking is look closely at the screen - all the image especially our water marked logo ( That's the whole reason its embedded into the program ) is so it SHOULD BE SHARP & CRISP to look at.
Remember this MK3 version is double the power of data flow than the MK2 version we have developed.
Both are FREE to you guys to use - if it helps fix one person TV then its been worth the long journey & time we put into them
Best wishes Ricky
@@idpfilm just wanted to say thanks for *all the hard work* in making these.
I have a 4k short throw projector and it's got 1 white pixel stuck. Your original program made it half the size it was.... I'm going to keep running this every day in the hopes it resolves the tiny issue left.
You have saved me buying an entirely new projector! (This one was only 11 months old but warranty ended 2 months ago). 🙏❣️
Ty again!
Been running this for almost 3 hours and the red pixel is still visible. any advice?
yotoprules - suggest you read the comments on:
ruclips.net/video/S_sIqNIvRh4/видео.html
One of the things is any new display: Laptop / TV screen / Monitor can have stuck or dead pixels on arrival
try and read our feed back comments we have left for other - it wil help
you will see by other users that it can work - its not 100% but with effort over a small period of time it can and does fix these little issues
we wish you luck on your quest - best wishes
It is working for 2560x1440 monitor resolution? I have acer nitro vg270 .
Will it work for my infinix phone and has a fat dead pixels will it work for 1hour
This looks like the hardest Project Arrhythmia level
can it fix dead pixel on my laptop?
Should
Hi, I have a stuck pixel in my JVC projector. I have ran the programme every other day for two weeks now, with no luck. I feel maybe I´m not stressing the pixels enough because I´m running this from youtube. Is it possible to have access to de Original Cinema DNG Files to stream them from Davinci Resolve via a Decklink Card, that has more depth of color? Thanks in advance
Victor - as we have said to a few others - you have to ensure that your ISP server is NOT streaming it say at 1080p or 2K
We know for a fact that some computers ie Apple will steam at 1080P HD - that can be seen in the quality settings at the bottom right hand edge of the viewing platform.
That said - its been uploaded in the highest S-UHD settings possible - which if your Router & ISP server is capable of it will do the job.
You are correct the program was produced in Davinci Resolve at max render settings which with a Mac Pro 8-Core took a bit to render and made a huge file.
The question is HOW are you running this to your JVC projector - and what is the max resolution output of this projector ? - what cables are you using. It sound like that you know also the 'Black Magic Art' with editing and resolutions.
Its worth standing back and looking at how you are getting the program to the troubled display unit !
IDP Film Thanks for your reply. I have been running this in 4k (youtube setting) all the time. I have a 200mbps internet connection. At the moment I’ve been outputting this via a Gtx 1080 graphics card using an Hdmi cable 2.0 and RGB 12bit signal. The projector is a JVC reference RS500u capable of accepting a 4k signal but with a native resolution of 1080p. Thanks again. Any help is appretiatted.
I let it run for several hours on my brand new Sony Bravia, but nothing. I think it's the same as all other "pixel refreshers" - it might work for a few people by sheer luck.
I will give it two or three more evenings, though. I'm kinda desperate because Sony refused to issue a replacement TV. It's the last time I bought a TV from that crappy company.
sony is best in quality but has delicate parts
Will this remove dead pixel from lg oled tv. A small black line appeared today at top middle of the tv screen. Worried it might be a dead pixel. Please advise
rathan1980 - suggest you read the comments we have left others.
If you follow these guide lines then you will have success - our advice is dont leave a dead pixel - the longer they are there the harder it will be to eliminate it.
Will it work on my 5th gen kindle?
Hi is this applicable to oled in regards to evening out pixel wear? I have a LG B6 btw.
Yes
I love You
Does this help to remove pixels due to condensation....??? I have got purple pixels on my Samsung M31s... please reply....
Vc tem o mesmo problema eu tenho um Samsung Galaxy 2, então no meu melhorou mais não muito mais já melhorou 10% eu nem consiguia ver em baixo e da lateral mais Nessitam deixar no máximo o brilho o meu é um preto então se tiver escrito errado é esse problema
I have a dead 2 pixel my device is samsung s7 edge do you it will be fix by this video?
Why does it bleep?That seems kind of superfluous.
Tech guys at IDP FILM
the only reason why we have bleeps on the software program is 2 fold:
1) so the end user can run the software as per the instructions - WITHOUT the need for them to look at the screen
2) so the end user can check every time they walk into a room whilst the program is running - to know its running
we suggest the volume is turned down low - and keep an eye out for the bleeps - if the bleeps are inconsistant then that could be 2 fold:
either a loss of internet streaming data or bad connections
hope that answers your question - we always try to think outside the box here
Best wishes and thanks for asking the question
How to run this video on smart TV continuously ?
Run it from RUclips - and just loop it.
It will work on any platform - ie 1080p / 1080i / 2K / 4K
as long as previously mentioned in the write up below to other member's that its is streamed at true 4K HD straight from this program.
As mentioned so many times before - if you download & copy the program then Data will be lost due to ISP & broadband service providers download stream.
So once again - you need to run it straight from RUclips
follow the posts we have left for others
Read to comments we have left for others on the MK2 version of this - see other program
It will work on any platform - ie 1080p / 1080i / 2K / 4K
as long as previously mentioned in the write up below to other member's that its is streamed at true 4K HD straight from this program.
As mentioned so many times before - if you download & copy the program then Data will be lost due to ISP & broadband service providers download stream.
So once again - you need to run it straight from RUclips
follow the posts we have left for others
Show less
we recommend you run it for the full hour - see the write up on the MK2 edition ( ruclips.net/video/hpeLXoqyiyA/видео.html )
there are things you must do in order to get optimum results
best wishes
IDP Film can I run it from my Xbox to the tv?
Sir actually my computer led32inch make black spot so can i play on this video
Yes you can
Hi. I tried this right now. I think there is one "stuck" pixel on my laptop screen. It appeared as red on a white background and green on a black background. After this video, it started to appear as white on a black background. Still red on a white background. What should I do?
What am I meant to do
Just let the video run and put your phone face down
Came home this evening to a white pixel on my 3 week old C9. Have this running through the TV’s RUclips app in 4K just now so going to leave it and check in a hour. Fingers crossed it’s fixed
@Chris Schuler think he died
What happened?
TV exploded with him
Hi, is this designed to fix stuck pixels on OLED TVs?
YES
It works on your TV?
@@idpfilm i am running it currently on OLED TV. Really hoping this will fix it.
@@ChaitaliRaizada It works?
@@ChaitaliRaizada did it work?
I don’t want to be the same people asking the same dumb question but..... I have a dark shadowy circle on my tv from where my daughter touched it will this fix it
We have no idea - the only way to try and cure is to run a few programs. You say your daughter touched it ? - that will surely not damage the screen - are you sure that it was not pushed in hard !
Any screen that is touched would not cause a problem - after all how do people clean their screens ?
Will it work to phone j7 2017
no reason why it will not just ensure you stream at max ie 4G or 5G
Will this help with cloudy screen?
Most likely not because that is probably back light bleed Is nothing you can do about it
Worked but needed 3 hours to fix per day and 3 days it took for me to remove Alf my screen top got dead pixels anyways it works
can i run it in 2x speed?
No it will not work - period
we suggest you run our latest version - see our site for the link
ruclips.net/video/S_sIqNIvRh4/видео.html
Is this a permanent fix or temporary
permanent fix
for how long should i run it for?
we recommend you run it for the full hour - see the write up on the MK2 edition ( ruclips.net/video/hpeLXoqyiyA/видео.html )
there are things you must do in order to get optimum results
best wishes
See the post we have left Tytus2008 - we hope it helps you
best wishes Fella
How does this fix a dead pixel exactly?
I think it works by shocking the pixels back to life with the rapid changing colors.
Yes it will - if you follow the instructions - see comments we have left others ( on both this latest version MK3 and the MK2 version comments section )
don't stare into this :)
Why not, like LSD trip.
Pessimo só causo mais
Does it work on 2k ips monitors? I have 3 pixels off, white red