RELOADING ROOM UP GRADES-Process Improvements
HTML-код
- Опубликовано: 19 дек 2017
- Here is my reloading room that show a lot of up grades and process improvement. Lot more video's coming. Next video is my primer alarm, primer feed and my round counter that I built.
"Get rid of your 4 wheelers and your boat"........ I had a wife once that delivered a similar ultimatum to me and she wanted my decision immediately. I asked her to make me a sandwich before she left (that really pissed her off) and she was subsequently delivered a set of divorce papers for her efforts. Found a good wife later on.
I tell people who are starting reloading to set up a well organized, solid, clean, well lit space to work. And that should be included in the costs of reloading.
This is the epitome of organized, solid, clean and well lit. Very well done. You even have dust bags over your presses. ⭐⭐⭐⭐⭐
I 100% agree. Everyone spends their money on something. This is my favorite hobby.
Thank You for your feedback. Good Shooting my Friend
Yep, Good Shooting my Friend
props to you bro, I got divorced and will likely never get married again... I'll keep my toys and my reloading lol
Been shooting for 50 years never reloaded just saved all the brass After seeing your vids iam In!! I'm very mechanical in mind and you and the LEE speak my language..Thanks for your vids I have three girls and were going FULL KUKE !!
I love your reloading room. I find it to be a never ending job organizing and setting up my work space, you have done it right! I am a Dillion guy after years with Hornady. I run 4 Dillion XL 750’s and a bunch of Hornady AP’s some still new in their boxes which I plan to sell when i find the time to list them. Like you I take very good care of my equipment and really enjoy reloading, Great job on maximizing your space.
Beautiful setup! Thanks for sharing.
You keep doing you sir this is the first time I've seen one of your videos and I actually enjoyed listening to your story and I love your reloading room it is a hobby I want to get into but cannot afford it just yet. And to hell with anybody that tries to tell you what you can or cannot do. Thank you for your video
Very well laid out rooms mister. I like the multi presses all set up and ready to run whenever your time allows.
Awesome reloading room! Lots of great ideas
Incredible, wow, neat and tidy, clever, everything in its place, sophisticated, user friendly and certainly a labor of love.
Thank You, Good Shooting my Friend
You have the best setup I've ever seen. Companies should be sponsoring your growing the sport , I wish I'd started years ago. Thanks for the video.
That is an amazing reloading room.
That’s an awesome setup 👍👍
Very impressive man cave. Its nice to have all the equipment needed to reload. Also it looks really organized . Thanks for the video.
Thank You, Good Shooting my Friend
Great tools room!
This is a Disneyland for ideas! Thanks, Big Poppy!
Totally awesome reloading room brother. Great video.
Thank You, It took me 6 years of saving. Thanks for stopping by my Channel.
Why would anyone give this video a thumbs down? Thumbs up from me. Very intelligent man. Thanks for the tour and your humble nature. Highboy
Glade to hear from you again, I also enjoy your channel as well. Thank You for your feedback, greatly appreciated my good friend. We have a long road in-front of us to be able to help, educate and show the passion we have for guns and reloading on RUclips. Thanks
Harleychromeman Your welcome my friend. Highboy
Awesome set up.
Thank You, Good Shooting my Friend
because its 25 mins long for 10 mins of content
Very nice set up! I enjoy your videos. Keep them coming.
Thank You, Good Shooting my Friend
Very nice setup! I love getting ideas from others for my own and this was a treasure chest full great ideas. Thank you, for sharing! You have a new subscriber. I will now be in search of other videos you have produced.
Thank You, Good Shooting my Good Friend
awesome shop!! man i hope i have a set up like that one day. and i love how organized EVERYTHING is. 2 thumbs up my friend. great job
Thank You, it took me 6 years to save my money and sold my other toys. Good Shooting my Friend
I fully agree with 76Highboy Reloading. This is my second video of yours and I subscribed and now have a BUNCH of catching up to do! LOL Thank you for your time and your input. I LOVE those .50 cal drawer pulls!
Thank You, you can buy the .50 cal pulls on e-bay. Seller is COWBOY, he hand make all calibers, all the money is used for medical care for his daughter. Great Guy Good Shooting my Friend
That is a reloader's paradise. Nice work, sir.
Thank You, Good Shooting my Friend
Thank you thank you thank you I just showed my wife your video and you made me look good
Its been several years since you made this video but I enjoyed it alot and wanted to tell you that. I am brand new to reloading (have not loaded my first empty yet but will when this virus thing is done). Anyway thanks again for the video!
Awesome set up! My wife's into it to....It helps for sure!
Thank You, Happy Wife, Happy Life. Good Shooting my Friend
Elvis and cookie are underplayed legends
I was saying to myself "wow, that's a really nice room, where's he going... wait, there is A SECOND room?!" Looks awesome.
Thank You, Good Shooting my Friend
Man alive, that's just gorgeous. I'd love to see this in person. It's just fantastic.
Thank You, Take your time and plan and you will get there.
I have just gotten started in reloading and have spent a bit of time and money in creating a bench, storage and purchasing what I term “dodads.” Your video is a caution in that it shows the extreme to which I don’t want to go. Thank you.
my wife and I shoot 3 days week shooting in competition. You can get by with 1 press and your dies. I have reload every week, I don't have time to do that. I would go broke if I had to pay full price on ammo. you have to reload. Good Shooting my Friend
You definitely have made a considerable investment into shooting and reloading with a sweet set up. Unfortunately, I don't have the space for such rooms as you have. Very nice and well done.
thanks so much for the personal insights Poppy! I'm still smiling about the wife who emailed with complaints :-) Your room in awesome... every time I think my reloading room is looking good, I go back and watch one of your vids and realize I'm not even close! the only good news for me is that I still own my boat!!!! :-)
Thanks for the feedback, it took me 7 years to get it too this point.It's always good if we can keep few of our toys. :) Good Shooting my Friend
You Rock my man!!!...
Thank You, Good Shooting my Friend
Impressive setup, well designed & good use of space & equipment. I'm doing well with my setup of one co-ax press. It gets the job done for me & I load 4 different calibers at this time, slow & steady. Thanks
Thank You, Good Shooting my Friend
Very nice. I just moved and I am in the process of setting up my new room. Just subbed you.
Thank You, Good Shooting my Friend
I suspect that you're one of those guys who is actually a lot smarter than he seems in his videos. ;)
Thumbs up. Thanks for sharing your setup.
Thank you very much for this video............we could all show this to our girlfriends/wives when they become concerned about our reloading expenditures hahahaha
This is an incredible reloading room. This is a LOT of stuff.
Best thing I ever did was buy my wife a handgun. Now she tells me that I better keep her 9mm rounds reloaded. lol Good Shooting my Good Friend
For a self sustaining setup it's very nice. My buddy is an FFL with an ammo factory attached so I just go make myself whatever ammo I want, but if I couldn't do that this would be how I'd make my room.
Inspirational. I am up to 4 loadmasters, an XL 650, a 550b, a classic cast Lee, and a lee cast turret. I'm out of room!
😮 congrats! Wow
Thanks, Good Shooting my Friend
What an outstanding setup! Just found the channel, and I have a feeling watching your videos is going to cost me money.
Please don't tell your wife about my reloading room. lol I have already got ripped from 1 wife, she told me if her husband didn't quit spending all there money that she was going to divorce him and she called me every name in the book. She sent me video, her husband was laughing his butt off in the back ground. Thank god that she not my wife. Good Shooting my Friend
i just found the channel too. i think its going to cost me alot of money too. but i have a baby girl coming in november, so i guess it will be a while before i can get anything like this haha but thanks for the videos!
You have everything anyone would ever need to do almost anything in there!!!
How beautiful.
I want to buy few more items, not their just yet. Thanks
Thank You, Good Shooting my Friend
Wow! And I thought I was set up for loading. I have about 10 presses, no two the same. Like you, I have the small Lee C press devoted to bullet pulling. My first press, a Rockchucker, is semi-retired and has been fitted with the Hornady LNL bushing system. I have a few specialty dies set up for it. I use the Lee Value 3-hole turret press with several extra turrets to hold all my Redding Instant Indicators. It works well because I can just pop out the turret and dump out the internal part and drop in the next one. I just move a common dial gauge from indicator to indicator. I have one progressive press dedicated to .223 and the Hornady LNL AP for most pistol rounds. I also use the AP for case forming. Set up 2-5 dies and start cranking. I like that drawer pull on that little drawer next to that black electro-box. ;-) Maybe you could go into detail on how you set up your Little Crow trimmer. I notice your Hornady Concentricity gauge is still wrapped in plastic. My advice: don't unwrap it. Return it. FWIW, I had that unit as well as both the RCBS and Sinclair units. With the RCBS and Sinclair units the exact same round of ammo would give, say, .002 inch runout and the Hornady would read .006. And as far as that little plastic thumbscrew correcting runout? Well maybe with soft brass like the Hornets and the -20 rounds. I will be subbing in two clicks. Thanks.
Thanks for stopping by my channel, thanks for feedback on the hornady concentrity gauge. You can buy the pulls on ebay, type in bullet pulls and look for seller called cowboy. He has daughter that has illness that cost a lot of money for treatment. He also donates part of the money to other children. Awesome guy and his mission. I will put the little crow video on my list. I like the feedback, Good Shooting my Friend
Thanks brother. I'll try to do the same with the Wifey..Although she's been wanting to have my XD45.
Amazing shop ...
Thank You
I envy your load room, very awesome
Thank YOU, Good Shooting my Friend
You've got the dream reloading set up.
Thank You, Good Shooting my Friend
Thank You, Good Shooting my Friend
Dude f#$king awesome setup
Thank You, Good Shooting my Friend
Your set up is amazing. I just ordered some equipment to get started and trying to learn as much as possible in preparation. You seem extremely meticulous and organized. Let me know if you want to adopt me.
You reloading yet?
Yes please, show us the build for the press boxes with primer alert!
Good job recruiting another 2A advocate. We need all we can get, especially significant others. Yours is a truly impressive setup, one that I could never make use of with the low volume of ammo I need. I'm getting back to reloading after several years' break. From May '11 to Sep '13, when I was actively reloading between teaching jobs, I built 6,800 or so rounds on a single stage Hornady press. Not high volume, but every round gets personal attention. I wonder, and it's just a thought, if you can actually enjoy reloading when you have such an elaborate setup. For me,having so much to keep track of would not just be overkill; it would be a joy killer.
Thanks, My wife and I shoot 3 days week, I do a lot of reloading. Good Shooting my Friend
Damn what a setup.
Thank You, Good Shooting my Friend
How come you stopped loading content? You have a great deal of knowledge and you did a great job in this video. I would love to see more. If not I’d at least like to find you on social media.
@@joshables9161 Once things get worked out with You Tube I will start making more video's. Its against their policy to show how to reload a round from start to finish. that why several of us have stop making our video's. It's a longer story but we're trying to make work for them and we can continue helping other people and doing things right. thank you for your kind words and watching my video's. Ounce they tell me that they won't give me strikes and delete my video's. I will go back to making my video's. I have been working with You Tube rep. Another thing we can't do in the video's is tell you where you can buy anything in regards reloading equipment, brass , primer , powder. I have video out there about where you can buy the new bullet feeders for loadmaster press. Second video's was different powder loads for 300 blackout. these are just few things as example. Good Shooting my Friend. I still reload 3 days a week and still shoot competition every week. If you want to see how stupid the policy are on You Tube, type that in to see what comes up on policys. You Tube was Awesome to allow us to educate other reloaders until everything went south.
I learned how to reload from watch folks looks Elvis Ammo, Fortune Cookie LC45, and Johnny’s reloading bench just to name a few. If had not been for those videos I would have never learned how to reload. I remember when RUclips started causing you guys problems and I stopped watching RUclips around that point but have gotten back to watching them again. I didn’t think they were still raising hell about it. That’s just wrong. It’s an attack on free speech in this country. I will certainly be looking for more videos. Good luck with with the battle. Good shooting to you as well.
Have been reloading on single stage enjoying the hobby can't get my wife into shooting lol so help me come up with another solution so she want nag to much great video.
How does your wife think about conceal and carry and protecting her family? Is their a window that she would learn how to shoot a gun to protect herself and other family members? I would push the issue about to many crazy people out their that you have to be prepared. I would give her few examples. ie what would you do if you was home alone with your grand kids and 2 people broke into your house? My wife didn't want anything to do with guns, I gave few of these examples, bought her her first gun and took her to the range and she was hooked, I have heard several times that she would do anything to protect our grand kids. Now my wife shoot 3 times a week, only thing she tell me now make sure I have reloaded her caliber for her to shoot. Good Shooting my Friend
liked the gun analysis on your wife, my wife now has a way better collection than I have, the other day she bought her a brand new browning white gold medallion maple blr 243. I have succeeded.
Awesome man, looking forward to the next video. And I would be interested in seeing how you made those boxes for round count's, maybe make a 6 part series.
Consider it done my friend. My plan is to do the box video tomorrow.
Fantastic setup! Subscribed. I have a small lathe (Atlas 6x18) that I consider an important piece of reloading gear, I want to eventually add a mill.
Thank You, Mill works great for AR 15 lowers. RUclips will not let me post those videos. Good Shooting my Friend
I started as a stone cold beginner with a used Lee Pro 1000. It needed to be pretty much overhauled. I eventually loaded 1000s of rounds with that press, I learned every fix and tweak known to man on that machine. I finally sold that press and got Dillon 550b then a 550c. I wouldn't trade my learning curve on that old Lee for anything. You know what else I learned? Dillons arent perfect, they are good though.
I would love to pick your brain on the Lee Loadmaster, I have modified mine and it works great, but i also prime off the press, I have a idea to make priming much better on the loadmaster and would like your input on it, maybe we could jump in a hangout or video call sometime and I can show you my idea. Thanks Harley love your videos, your the reason I got the loadmaster in the first place.
Id be interested in the box you use for your low primer indicator! Seems pretty cool. Glad to see you making videos again!
I will make video on how to build it, probably not going to be until the first of the year. I have 10 video's to do first.
Why not make a few and sell them?
I will talk about this in my video for tomorrow.
''she can't beat me on rifle''....yet...my wife was a little like yours, now i have to apply myself seriously not to be outshot, that bud is a great feeling, healthy fun competition with your wife!
I agree with you. Good Shooting my Friend
Another great video!what are you using for the recipes on your presses?looks like an iPhone Cutout
Man.....you really like Lee.
We all would have a shop like yours if we could :) .
Thank You for your support and stopping by my channel. Good Shooting my Friend
Ultimate reloading set up. I have not had luck with the Lee progressive press though. Primer feeding is a nightmare.
Thanks for stopping by my channel. Good Shooting my Friend
What bullet feeding system do you use?
I have the same milling machine . Little machine shop . I have made parts for my AR-15 , ruger mrkiii.
Hi Harleychromeman I have a lee load master and it was going fine then I let it sit for 12 months and then it started playing up with the primers not going in properly and kept jamming up, I have watched most videos allvery helpful
take your primer assembly apart and clean everything with rubbing alcohol Once cleaned, take a wax product, i.e, car wax and polish the primer track inside the 2 pieces. A lot of times dirt will stat to gether inside the assembly. I this doesn't take care of the problem, replace the spring on you primer assembly. Hope this helps. Good Shooting my Friend
You sir are a legend! And some how you found the perfect wife !!
Very cool. I think maybe the only things to add would be a ventilation system, coffee maker, fridge and toilet. Why leave?
I got my missus into shooting and she is awsome at it. The only problem is when we go out shooting at night im always the one who has to drive and spotlight.
Harleychromeman, I have started watching your videos lately and have seen and learned things that you use and do and must say to you. Hell yea your the man dude. How can Lee not have you tied up in some kind of tutorial deal seeing as how you break down the intimate details step by step. Is there any way to communicate more directly so I may ask some quick questions about some of your speciality tools I see you utilizing and other little trinkets here and there perfecting the great Lee Load Master and auxiliary such items
Thank You for your feedback. My email address is glnj47308@yahoo.com, I check e-mail and youtube everyday. Up to this point I have turned down receiving any money or equipment. I want to be 100% honest with all my subscribers. If there are issues or I don't like the product I want to call it out. I see too many other reloaders being told what to say or if they say something negative there being asked to go back and do the video over. I like having 100% control over my video's. I have been doing this for years. I am proud to say that I have paid 100% for everything I have in my shop. Good Shooting my Friend. If you e-mail me, make share that you use my channel name harleychromeman in subject.
Another good video. I would be interested in how to build the box and maybe a video on solutions to common problems using Lee Loadmaster.
I need to build one more box for my rifle presses, I will do video on how to build it. That will have to wait until the first of the year. I have 10 video's to do first. Good Shooting my Friend
I will do trouble shooting video's on the loadmaster on how to fix issues.
Sounds like a win-win situation for you and your wife. Lucky man! Maybe that was her secret plan all along...
Great shop! This video took about 10 minutes before you actually started the tour. What kind of mill do you use?
Its a littlemachineshop. Its a upgraded harborfreight mini mill from the looks of it. Nice machine
Dude! You have easily over 200 large in this room!
I have Lee pro 1000 and lee breech lock challenger looking for a lee load master
I have so much issue with Lee load master that I'm thinking about changing to Hornady.
extremely impressive! just curious.....how many rounds would you say you shoot per month?
Since my wife and I shoot completition every week, its up around 6000 rds per month. I have to reload 3 days a week. Thank You for visiting my channel.
Man, unbelievable the amount of money spent!!!! Just awesome!!!! Once quick question and please educate me here??? Could you have gotten the Dillion 1100 or the super 1050 and bought toolheads to replace every press instead and have just one press?
I thought about it but decided since I reload 3 times a week. I save a lot of time bye not having to set up different calibers. My wife and I shoot competition Thank You for your feedback. Good Shooting my Friend.
Wow, its great to see someone who loves what they do as a hobby.....so many folks don't have one and its sad. Can you sell the end product? is it legal? Well done.
You can't sell ammo with out having license, too be honest I wouldn't sell any of my ammo because it only takes 1 person to say it was my ammo to cause the gun to blow up. If your talking about 80% Ar 15 lowers, no you can not sell 80% rifle unless you send it in for serial number and the gun has to be registered. All my 80% AR15 lower video's got removed on RUclips. It against RUclips new policy's, not allowed too show how to build firearm now. My wife and I shoot 3 day week, love the hobby. Good Shooting my Friend
Love the room Brother!! I would do the same if I could. Bet that was fun building and stocking . One question! Where is the cot? Cuzz I would definitely be sleeping in there!!
I spend a lot of time in my reloading room and my wife doesn't complain. So far I have been lucky that I don't need cot. lol Good Shooting my Friend
I miss your videos, hope you are doing well
Just SUBSCRIBED. Two issues.....I saw 3 specks of dust...and no marble floor in your work center. It's cleaner than my kitchen. I am impressed. Thanks By the way, where are your spare Harley parts ? J K
Thanks for stopping by my channel, yes I am neat freak, everything has a place. lol Good Shooting my Friend
Where did you get your shop air set up
It's called rapid air system, little pricey $150.00-$225.00 kits. Rural King has the system and also sold on ebay. Good Shooting my Friend
What is ur occupation?
hey just want to say you do a great job. can you tell me where i can get that sweet aluminum bullet feeder setup that you have on the progressive presses where i can get all the parts needed for a 9mm and a 40 Cal setup thank for your help
I will be doing that video this Saturday, I will name all the parts and where you can buy them. Thanks,
what will be its title what should i look for
I just uploaded the video today, Lee Loadmaster Trouble Shooting Series Video 6
Thanks ill check it out right now once again thank you for your help enjoy your evening
I still can't find any primers.
First off what a awesome reloading room. I could see why someone’s wife would cuss you out though.
Thank You, and stopping by my channel. I got wife into shooting, best thing I have ever done. lol Good Shooting my Friend
I'm one up on you Harleychromeman in my reloading room i have 2 stools to seat on and I only see one in yours lol I don't like bragging but , i had to, just messing nice shop
plow I think by having only 1 stool his shop is able to remain very clean and highly organized. I'm jealous of his shop. My garage is polar opposite of his nice place. Makes me jealous.
How much is she spending? Nice set up by the way. Cheaper than Dirt = more expensive than gold.
Awesome reloading rooms... Thanks for the tour...
I'd like to talk to you about your "Pro auto disk". I looked on your homepage for a way to contact you but couldn't find anything.
Thank You, you can contact me at glnj47308@yahoo,com. These Pro Auto Mix sale at regular sale price for about $57.00 each. I have 5 that are in brand new condition, I installed them on my press and put powder in them 1 time. When lee came out with these new powder drops, I took all these off and replace them on every press that I have. I have always stock brand new disk in my inventory as well. My 6th unit has been used a lot. I will sell them for $32.00 each plus shipping. If you want more of them, might give you a better price. We can do the transaction using e-bay if your interested. Good Shooting my Friend
Thanks for the offer but I found the auto drum on sale right after I posted the comment... I'm going to buy a couple of them to try out... Thanks again...
👍👍👏👏👍👏👍👏👏👍👍👍
You know I really did try and hock up with you to get some answers about some tools you used....I got nothing
Thanks harlychrome
How come you stopped doing content?
Very impressive, however my wife would never let me purchase all those presses.
Your AAC label for 300Blk is correct.
Thanks, Good Shooting my Friend
I had a similar ultimatum so I divorced the problem.
Mad lad..
Wow that is a lot of Dollars right there invested.
Yes, six years of saving and wife mad me sell my other toys. lol Good Shooting my Friend
You’re slacking. You need more