Hey everyone! Thanks so much for taking a guess on how many hours the tote full of firewood lasted in my wood boiler. So officially, I burned it up from 5pm Sunday until 6:15am Tuesday morning for an exact total of 61.25 hours. One person guessed it exactly and I had 5 other viewers that guessed 61 hours. These commenters listed below can provide me their address at "digdrivediy@ gmail.com" and I'll send them a nifty DDD sticker for their efforts. Congrats to the following: Nathan Small - 61.25 hours William White - 61 hours jpcox888 - 61 hours Paul Weakley - 61 hours Jason E. - 61 hours John Derrick - 61 hours This was fun! Thanks so much for playing along and watching the video. Take care.Neil
Appreciate it Brock. This 755 never would have lifted them without the pressure being turned up already. It's time I look for a bigger tractor i think! :)
Cut the top off the plastic totes but leave a 3-4" lip around the edge for rigidity. Then screw them to a wooden pallet, drill a few drain holes and open the valve. Now you just doubled the number of totes you have.
I have a friend that does the same with the totes. He cut the bottom off of the plastic bladder about 6 inches up and flips it upside down for a cap to cover the tote. I am also guessing you get about 60 hours of burning on a tote.
I think it’s funny you listen to the “comments” of people that are criticizing your actions. You do a great job! Don’t change what you do because of a few armchair quarterbacks. Your channel is my favorite! “Lumnah acres” is a close second. Thanks for all you do! Ignore the critics! 👍😊
60 hours. No need for counterweight, Christmas cookies are coming. “I’m sorry but yes I ate the entire tray while they were warm. I have fire wood to move. I’m doing this for you.” Very cool video. I wondered if the top brace should stay on the side you cut for strength, but thousands of these have been maid and they seem to hold up fine. Don’t scrap those containers. You can set them out by remote small tress and water them over a pretty long period. We just set a couple on an old trailer and haul it around.
Now this is one of the best ideas yet! Christmas cookies for ballast. I'll get started right away!!! :) You are so close on your guess! Missed by just an hour but alas, there are 5 others that are right on. Dang it! Thanks for taking a guess on the hours. I will pin the answer to the top comment with the winners 12/5/22. Thanks so much Marcus.
I cut sooo much wood as a kid when i eventually got my own place I broke down and installed gas heat in my 60x80. I keep my shop around 60°(50 if in not in it) for right around 100$ a month. Typically (in Central Illinois) I only run it 4 maybe 5 months out of the year. Call me lazy but for that kind of money it just wasn't worth it 🤷♂️ My old man finally agrees with me 🤣
You’re gonna have a lot of “you-shoulders” tell you how to cut and use the IBC totes and bladders. You’ll figure out what works best for you. Great video again! See ya on the next one!
Couple weeks ago I seen in my neighbors woods IBC totes dumped in the woods and I thought that’s crazy someone dumped there like trash, well a day later he was filling them with firewood. I agree the grapple is the best tool for firewood besides skid steer mounted splitter and rock bucket . Great video Neil!
Worksaver makes a 3-point hitch to SSQA, which just might be the best tractor accessory money can buy. Run your pallet forks on something like that, forgo the non-functional counterweight, and keep the load/tote close to the machine where it is far more stable than out on the end of the loader boom. I even modified mine and welded in a 2-inch receiver for extra functionality. I also use it to hold my bucket full of material or a log clamped in my grapple when I need a LOT of counterweight. Also transport an extra SSQA attachment out to a work location instead of making trips.
Great video as usual 👍. I'm glad you put your helmet on, to get in the game🤣😂. If you cut the sides off of a large 330 gallon tote's tank , they makes great rain caps and scrape pan catchers sitting under the splitter. In my area on Maryland's Eastern Shore, the clean food grade tanks bring $20 to $40 each. The tanks with mulch die, I've been giving them away on marketplace as labeled project (goat huts) etc... I've give away 40+ in no time! Keep up the great content 👍☺️
Neil, I like the way you have worked hard to provide wood for your hungry hungry furness. I'd say that you have a very good trailer which works well to transport the wood from the wood lot to the storage by the wood burner. The trailer moves with minimal effort from your tractor, but the totes loaded with wood strain the tractor's hydraulics. Please be kind to your faithful tractors and use a trailer to move the split wood by rolling, instead of straining to heft the loads hydraulically!
@@digdrivediy Neil, what I am trying to say is "Let the cool kids have the totes and you (if it fits your way of doing things) just use a trailer or worst case Make/borrow/steal a smaller trailer to use. Tractors pull things very well and a trailer fits right into that!
You should really make a true ballast box. Would be a great video. Makes such a difference. I customized a commercially available box so that it could hold tools, saw, log chain, and it even has a bench vice on it.
I like using my 3 point carry all on the rear of tractor as well as my forks on my Kubota 3301 I was not sure you were gonna get your green machine to lift that tote but it did 👍 Thanks for sharing
Thank you for using the face shield and ear protection when using the grinder and cut-off wheel. You really should put the guard back on the grinder to guard against grinding wheels breaking.
Very nice! You're one of my top 5 William. I'd be happy to send you a DDD sticker for guessing correctly. If you'd like one, then send me your shipping address to "digdrivediy@ gmail.com" and I will get it sent out. Thanks so much for playing along and I really appreciate you watching! I'm also really glad to hear that you like those Brunt pants. I've been wearing mine much more often.
When I cut out the door of the tote, I make sure and fill the cut outs with silicone caulk to keep the water out of the tubes. Once they freeze they will rupture the thin tubing. I make a stack of 3 totes on top of each other with my 60hp JD in the pole barn to maximize space.
Great video Neil 👍. I’ve been using ibc totes for my firewood for years now. Love them, saves the step of me stacking back at shop. I stack In Them and done. I use the tanks for roofs. Cut them in a 45 and make a peaked roof to keep snow off. I cut a year ahead so wood seasons good in totes. Larger tractor so don’t have to worry about lifting, also I have 3 point forks so fill tote on rear first for ballast and then fill front one.
@@leovogelgesang4398 Never weighed one but I use the 275 gallon ones am guessing they weigh around 1200 lbs at least. I heap mine full now but have 75 hp tractor. I also have a 30hp JD and before I got my bigger tractor I had to keep them level with the top or it wouldn’t lift them.
The bottom of those cages WILL rust out if not protected. The aluminum cage will be just fine. My brother sells firewood and uses the plastic as a cutoff cap about 12 in. deep and wire tied on the cage with a few holes drilled in the edge to keep rain from soaking the wood directly and air can still circulate with the cap on top. I use the remainder of one that has had the top cut off of to put water in and drop a leaking tire in to find out the source of the leak. Similar to what a tire repair facility would use. The plastic insert can also be used as a rain barrel setup off gutters because it already has a built-in spout. Just needs a small platform off the ground to sit on. City folks might not like it because of the size, but in the country, it works great for rainwater collection even with the top taken off and the birds can always get a drink. Just a few ideas, hope they give you some more. My guess is 36 hours per tote.
Great video! Dad has used these totes for about 6 or 7 years now for his firewood. Based on my deductive reasoning, I’m gonna say 13.25 or 25.25 hours. 😂😂
I don't burn wood, but I have used those IBC totes for other things. The best use was for watering a baseball field infield when I coached at a local middle school. We didn't have access to water on the field so I put a tote on a small trailer and built a gravity fed sprinkler system on the rear so I could water the dirt on the infield to do the field prep before our home games. It worked great but, I found out the hard way that I needed a large vent on the top or the plastic bladder would collapse in on itself. Lol. Love the video, keep on keeping on my friend.
i’m obsessed with your channel love the wood splitter what an amazing design eastonmade should consider making a splitter pallet based with no wheels it would be very sturdy on flat ground
Good luck with the totes, I didn’t really like using them and went back to trailers. When really cold a tote would only last me two days and my smaller trailer 7-8 days…and I have several old truck bed trailers. Hours….you were 50 or so.
I could see that. This won't be my end all for handling firewood, but it will be another tool in the toolbox. Thanks for taking a guess on the hours. I will pin the answer to the top comment with the winners 12/5/22.
Great video! If you need an interesting project. Find a way to close the levers of the ssqa from the seat of the tractor. Not a bid deal when putting on the grapple. But when you are going from bucket to forks to the trailer mover. It may be a time saver. Just a thought. 😊
I used the plastic tube from my tote as a pool pump and filter tank cover for the winter i cut the biggest side out all the way....after winterizing the pump and tank i wrapped them in a wool blanket and put the tub over them both until spring..works amazing and keeps them from freezing and i dont have to move them around anymore.
We've got probably 10 of these totes to use around the old threshers organization I'm a part of. They're deceptively heavy. I have a 3 point fork adapter that goes on a 45 horse Farmall 504. I can feel the front get light on that tractor.
Neil, I also cut my totes on an angle for the same reason. Then fill with silicone to keep the water out so they don’t freeze and burst. I’m guessing around 84 hrs. Thanks and I will see you in the next one.
I’ve used the totes for last 2 years and it’s great! I got through about 12 totes a year (330gallon larger ones) for about 3-4 cords of wood. Use my skid steer to move from storage place and onto my porch. Works great. Welcome to the IBC club.
Thankfully it lasted a bit longer than that. I think I'll like having the totes as another tool in the toolbox for different situations. Thanks for taking a guess on the hours. I will pin the answer to the top comment with the winners 12/5/22.
Really appreciate it. It didn't last quite that long this time but it might when it isn't so cold. Thanks for taking a guess on the hours. I will pin the answer to the top comment with the winners 12/5/22.
A good back to the roots video. I think TTWT and OWTM must both have Stihl relationships (or used to). You should reach out to them on how they got them, as your subscriber base should be worth something to Stihl in the battery space.
Hey thanks Jim. I know that at least TTWT has a relationship. They don't really sponsor but they will provide product to use in your videos as long as you use proper PPE. I have a contact for them so I'm wanting to reach out since I genuinely love their stuff anyway.
I had a similar issue my kioti cx2510 won't lift the tote with oak, but it will lift it with maple. Neat video, its alot of work to heat with wood, it seems free but it's not lol, have a great day.
I cut pool noodles in half long ways and zip tied them around the cut ends of my IBCs cheap and very effective. I’m getting about 6 days out of a full tote that my 4310 struggles a bit to lift. I’m guessing 73 hours
The noodles are a good idea. I could get 73 hrs on warmer days I'm sure but I was a little under that for this test. Thanks for taking a guess on the hours. I will pin the answer to the top comment with the winners 12/5/22.
with the plastic bladder, what you do is cut with a chainsaw down each corner vertically then horizontal so that you end up with two u shaped pieces. put them on an ordinary wooden skid and use wire to connect the vertical sides at top corners. Then go ahead and stack the same as you did with the metal frames. You can now carry a full skid anywhere, store anywhere and best of all carry to the stove without additional touching. add some slots so any water can drain and they will be around for years.
Nice video. I'm completely clueless about those bins and burning firewood but I know you heat your house and the garage with that boiler so I'll half the average of what I've seen others comment... I'll say 42 hours.
Not a bad guess at all but I got a little more out of it this time. Thanks for taking a guess on the hours. I will pin the answer to the top comment with the winners 12/5/22.
Welcome to the club LOL! I guess 73 hours! I burn all my cookies out of totes and I usually get 2-3 days out of one depending on how cold it is. Stay warm!!
I always enjoy watching your videos they caught my eye because I have a john deere 755 and 2 john deere 318's and a dump truck and a tractor I do side jobs with but I'm hoping to find a backhoe either a john deer 310 SE or SG or a case 580 SL or SM with a 4 in 1 front bucket
Hey Neil check out In The Woodyard episode 373 about 10 minutes in he shows a good solution to the log lift table on the Axis. Is a hack to make 1 person operable.
You my friend, are EXACTLY correct. You were the only one that guessed 61.25, which was the correct time after showing my watch in the video. Saturday 5pm to Tuesday 6:15am. I'll be glad to send you a DDD sticker if you'd like one. Shoot me your shipping address at "digdrivediy@ gmail.com" and I'll get one sent your way. Thanks for watching and playing along Nathan!
Those John Deere’s are so impressive for their size. My 40hp Kubota struggles to lift one without ballast. It actually wouldn’t lift one without shimmed hydraulics.
Great video, I say 75 hours for the one tote. Keep up the great work love the channel and content. Actually find you through Hometown Acres and Matt's of road.
Oh that's cool! Thanks for checking out my channel Jim. Thanks for taking a guess on the hours. I will pin the answer to the top comment with the winners 12/5/22.
I use the icb totes for firewood I cut a hole and the bottom out of the plastic tanks and stack wood inside them in the cage to keep more rain and snow off the wood if they are stored outside. What I’ve found out using the totes it varies the difference between using a small wood stove, fireplace and a outdoor boiler on how small the split their wood on how convenient the totes are they help move wood easier regardless I’m guessing the wood in that tote lasted around 48 hours
Great ideas! I may do something similar with the plastic. We'll see. Thanks for taking a guess on the hours. I will pin the answer to the top comment with the winners 12/5/22.
Thanks Mike! On warmer days that would be very possible but it didn't last quite that long this time. Thanks for taking a guess on the hours. I will pin the answer to the top comment with the winners 12/5/22.
I like using a 6" cut off wheel on a 4.5" grinder to cut the totes. I cut the window wide enough that my shoulders will fit through square. Saves snagging shirts. If you haven't disposed of the tote bladders yet, I've tried every possible tool to cut them down into manageable pieces and a small chainsaw with an anti kickback chain on it is the quickest. I stack directly into the tote as I split also, saves me a LOT of handling of the wood, and I've found that tote stacked wood seems to dry faster, since it forces more air gaps than a huge stack of wood. I have forks on the 580 Case backhoe, so no issue picking up/moving full totes.
Hi Neil, great videos. Really enjoying all of them. One question - why do you stack firewood? If you just throw the pieces into the tote you will get less in them which will make them easier for your tractor to move. You won’t need to cut away the side of the tote as you won’t need access for stacking. The bladders can just be cut into two and screwed to a wooden pallet. This gives you additional storage. Fill as many totes and bladders as you can and just move them as required. They can always be stacked on top of each other. Ends of bladders can be cut and used as roofs. They can also be cut diagonally to make pitched roofs.
Mainly I stack them just so I get more bang for my buck. I grew through so much wood that if I didn't stack it then I would burn through the totes every other day. Probably. Stacking just makes them last longer and saves me from handling more totes and I'll need fewer of them that way. Thanks so much for watching! Really appreciate it.
The tote didn't make it that long this time. Thanks for taking a guess on the hours. I will pin the answer to the top comment with the winners 12/5/22.
Of the 30 or so tote videos I've watched yours is the first I've seen that loaded it up with boiler sized (very big) splits. Everyone else had stove sized or very precise fireplaces sized splits. Their totes weighed between 1000 and 1200 lbs. Depending on the moisture content and wood type. You might be up to 1350 or 1450 pounds in your bin.
Neil… I’m gonna go with 73.25 hours. This is a good opportunity for comparing the lift capacity of the 755. On Cap’n Kleeman’s channel, he maxed out his, trying to move lumber for his YT yacht project. Dan Severn mentioned the ‘Designed’ lift capacity. I interjected that what matters is the ‘working’ capacity. It is found when it is all that the loader can lift before the rear wheels leave the ground. Having the ability to add weight to the rear and ratchet up the hydraulic pressure introduces another capacity number… the hydraulic seal ‘rupture’ point! I don’t wanna jinx anything but, a really good cylinder or pump rebuild video might gain you a bunch of ‘clicks’ and ‘likes’!!! LOL I’ve resisted the urge to go with IBC totes, so far. My Kubota BX23S is just too small to handle them. However, you got me to thinking.,. It can certainly lift a half tote! Perhaps I can shift the paradigm… A half tote would last me three days. That is more than a fully loaded Gator bed. True, it wouldn’t reduce my handling. Nor, would it be any easier or quicker. However, it would save wear and tear on my Gator’s bed and free it up everyday, for other (more fun) tasks! That’ll give me something to think about today as I cut some more firewood. Take care bud.
I'm pushing my luck aren't I! ;). I'm trying to make that little 'ole 755 more of a tractor than it was meant to be and I'll find the breaking point one of these days for sure. Someone in the comments mentioned a 3pt hitch to SSQA adapter so that I could put my forks on the back. That might be a good option for some of us guys with smaller tractors to still utilize our pallet forks and move a little heavier items if not trying to lift them too high. I can get along without the IBC totes like normal. But it has been a fun experiment. RUclips makes me feel like I was really missing out so I had to give it a chance. It will certainly be nice for loading out at the slab when I need a quick load to get me through a couple days. Thanks for taking a guess on the hours. I will pin the answer to the top comment with the winners 12/5/22. (you were too generous with your guess by12 hours)
Depending on if you've got any plastic tubs left, you could possibly use them for water collection during the rain season. I'm working on convincing my parents to get a small 4' wood rack to put behind our shed. Hope next year at some point you and Mike can do something together since I think it'd be fun.
Awesome setup! I like the flow you have now. You have done a lot of work this year to make this efficient!!…. I like the use of the totes. The problem I see is being able to stack them so you use up the total height. I am definitely going to be saving my Pennies to work towards some like this!
Glad to see you back this week. It looks like lifting the totes was a little much so just don't fill them as much or set some by the boiler and transfer from one to the other. Yeah, more handling but you may not get stuck when you have snow and ice on the ground. Here is another idea, get a bigger tractor, Tractor time with Tim could help you out, lol. Just kidding...
That's a little high but would be right on the money if it weren't as cold. Thanks for taking a guess on the hours. I will pin the answer to the top comment with the winners 12/5/22.
Just an idea for some extra counterweight, I’ve got a john deere 4300 and have a barrel filled with concrete as a counter weight. It’s got a 3 point link bar set in the middle but towards the top so it doesn’t spin about it just hangs on the 2 points with no top link needed. It works super well and comes on and off super easily if need be. You could maybe part fill a barrel and use the top portion for chains/ rope or tools
Fun video, Neil! I don't have any idea how much your average daily consumption of wood might be, so I have nothing to base my guess upon. However, my silly estimate is 87 hours... I wasn't sure your tractor would make the challenge! Be well, be safe!
I wasn't sure it would make the challenge either! :) Thanks for taking a guess on the hours. I will pin the answer to the top comment with the winners 12/5/22.
Neil did you ever think about putting a solar light yard by your wood pile so after work you can actually work a little longer making what when it gets dark
Neil, some people have no idea of the calculated risks that is taken to get work done, I'm thinking you should put a roll over protection with roof at the operator station on your wood splitter to prevent getting hit with an asteroid, (sarcasm) lol
Hello Neil great video me and my son always look forward to Sunday night which is when we watch your new video!! Keep up the good work!! And I think it took 49 hours to burn that tote of wood!!
I really appreciate your viewership Steven! Thanks so much for watching. Thanks for taking a guess on the hours. I will pin the answer to the top comment with the winners 12/5/22.
Hey everyone! Thanks so much for taking a guess on how many hours the tote full of firewood lasted in my wood boiler.
So officially, I burned it up from 5pm Sunday until 6:15am Tuesday morning for an exact total of 61.25 hours.
One person guessed it exactly and I had 5 other viewers that guessed 61 hours.
These commenters listed below can provide me their address at "digdrivediy@ gmail.com" and I'll send them a nifty DDD sticker for their efforts.
Congrats to the following:
Nathan Small - 61.25 hours
William White - 61 hours
jpcox888 - 61 hours
Paul Weakley - 61 hours
Jason E. - 61 hours
John Derrick - 61 hours
This was fun! Thanks so much for playing along and watching the video. Take care.Neil
Hello from the Netherlands Koch Family .
thanks for the video Neil .
Sincerely, Hollandduck
Thanks Hollandduck!
@@digdrivediy 👍
I was surprised the 755 even lifted the full tote. Now I have confidence my 855 will do it for camp firewood
Oh yeah 👍🏻
Welcome to the IBC tote club. We enjoy that they make me a better firewood stacker!
Do I receive a newsletter now? :). Thanks Chad.
Well done
I was surprised that your tractor lifted that.
Appreciate it Brock. This 755 never would have lifted them without the pressure being turned up already. It's time I look for a bigger tractor i think! :)
Cut the top off the plastic totes but leave a 3-4" lip around the edge for rigidity. Then screw them to a wooden pallet, drill a few drain holes and open the valve. Now you just doubled the number of totes you have.
I have a friend that does the same with the totes. He cut the bottom off of the plastic bladder about 6 inches up and flips it upside down for a cap to cover the tote. I am also guessing you get about 60 hours of burning on a tote.
They would certainly be good for something! Nice idea!
Thanks for taking a guess on the hours. I will pin the answer to the top comment with the winners 12/5/22.
I think it’s funny you listen to the “comments” of people that are criticizing your actions. You do a great job! Don’t change what you do because of a few armchair quarterbacks. Your channel is my favorite! “Lumnah acres” is a close second. Thanks for all you do! Ignore the critics! 👍😊
Thanks so much Josh! I try not to listen to the critics too much but it's human nature.
Thanks for watching!
I'm here for the 755 and to scope out your thumb setup on the backhoe 🤣
I would make some changes but for the most part it works. Depends on which bucket I use.
60 hours. No need for counterweight, Christmas cookies are coming. “I’m sorry but yes I ate the entire tray while they were warm. I have fire wood to move. I’m doing this for you.” Very cool video. I wondered if the top brace should stay on the side you cut for strength, but thousands of these have been maid and they seem to hold up fine. Don’t scrap those containers. You can set them out by remote small tress and water them over a pretty long period. We just set a couple on an old trailer and haul it around.
Now this is one of the best ideas yet! Christmas cookies for ballast. I'll get started right away!!! :)
You are so close on your guess! Missed by just an hour but alas, there are 5 others that are right on. Dang it!
Thanks for taking a guess on the hours. I will pin the answer to the top comment with the winners 12/5/22.
Thanks so much Marcus.
I cut sooo much wood as a kid when i eventually got my own place I broke down and installed gas heat in my 60x80. I keep my shop around 60°(50 if in not in it) for right around 100$ a month. Typically (in Central Illinois) I only run it 4 maybe 5 months out of the year. Call me lazy but for that kind of money it just wasn't worth it 🤷♂️ My old man finally agrees with me 🤣
My time is coming too! lol
You’re gonna have a lot of “you-shoulders” tell you how to cut and use the IBC totes and bladders. You’ll figure out what works best for you. Great video again! See ya on the next one!
Oh I get an education every time I post 😂
Thanks for watching!
Couple weeks ago I seen in my neighbors woods IBC totes dumped in the woods and I thought that’s crazy someone dumped there like trash, well a day later he was filling them with firewood. I agree the grapple is the best tool for firewood besides skid steer mounted splitter and rock bucket . Great video Neil!
13 hours. Those totes sure do come in handy for a lot of things.
I'm glad it was a little longer than that. Thanks for taking a guess on the hours. I will pin the answer to the top comment with the winners 12/5/22.
I worked at roll-a-cone in tulia Texas. We build industrial plows. We used those totes to burn trash.
Worksaver makes a 3-point hitch to SSQA, which just might be the best tractor accessory money can buy. Run your pallet forks on something like that, forgo the non-functional counterweight, and keep the load/tote close to the machine where it is far more stable than out on the end of the loader boom. I even modified mine and welded in a 2-inch receiver for extra functionality. I also use it to hold my bucket full of material or a log clamped in my grapple when I need a LOT of counterweight. Also transport an extra SSQA attachment out to a work location instead of making trips.
Man I like the sound of that actually. That sounds like a really cool idea. Thanks!
Отличная идея !
Great video as usual 👍. I'm glad you put your helmet on, to get in the game🤣😂. If you cut the sides off of a large 330 gallon tote's tank , they makes great rain caps and scrape pan catchers sitting under the splitter. In my area on Maryland's Eastern Shore, the clean food grade tanks bring $20 to $40 each. The tanks with mulch die, I've been giving them away on marketplace as labeled project (goat huts) etc... I've give away 40+ in no time! Keep up the great content 👍☺️
I like that catch pan idea! Very nice. Thanks so much for watching!
Neil,
I like the way you have worked hard to provide wood for your hungry hungry furness. I'd say that you have a very good trailer which works well to transport the wood from the wood lot to the storage by the wood burner. The trailer moves with minimal effort from your tractor, but the totes loaded with wood strain the tractor's hydraulics. Please be kind to your faithful tractors and use a trailer to move the split wood by rolling, instead of straining to heft the loads hydraulically!
Very true. I tend to use the trailer. It's way more than I use the forks and the totes.
@@digdrivediy Neil, what I am trying to say is "Let the cool kids have the totes and you (if it fits your way of doing things) just use a trailer or worst case Make/borrow/steal a smaller trailer to use.
Tractors pull things very well and a trailer fits right into that!
You should really make a true ballast box. Would be a great video. Makes such a difference. I customized a commercially available box so that it could hold tools, saw, log chain, and it even has a bench vice on it.
That's a cool idea!
The plastic tote make great outdoor animal shelters and u can hang heat lamp inside bringing cord through small hole in the cap.
78 hours, that's a pretty good job for your 755. Thanks for sharing 👍
I like using my 3 point carry all on the rear of tractor as well as my forks on my Kubota 3301
I was not sure you were gonna get your green machine to lift that tote but it did 👍
Thanks for sharing
I should look into some rear forks too!
You have a very nice place! Very spacious and well laid out!!
Nice backhoe moves, looks like you need more firewood split
I would say 95 hours and I always enjoy your videos.
A little high but not bad. Thanks for taking a guess on the hours. I will pin the answer to the top comment with the winners 12/5/22.
I take the bladders and cut the at the diagonal and stick them on top of the full cage as a rain cap
Great video Neil love seeing them wee tractors working 💪
Firewood and ponds make for good videos and u have mastered it
Great job, my wife asked, “Fire wood? Your watching them split fire wood?”
Yes I said, I find it very cathartic to watch 😉
Right on!
Well done on stacking those bits of wood u are a skilled operator 👍
you can make tops for your wood with the plastic badders or put them on a pallet and put wood in them.
Love Hometown Acres and One-Eyed Customs! You're in great company Neil!
Thank you for using the face shield and ear protection when using the grinder and cut-off wheel. You really should put the guard back on the grinder to guard against grinding wheels breaking.
61 hours is my guess keep up the great videos and so far I'm enjoying the brunt pants
Very nice! You're one of my top 5 William. I'd be happy to send you a DDD sticker for guessing correctly. If you'd like one, then send me your shipping address to "digdrivediy@ gmail.com" and I will get it sent out. Thanks so much for playing along and I really appreciate you watching! I'm also really glad to hear that you like those Brunt pants. I've been wearing mine much more often.
Neil,put some forks on your backhoe bucket loader and move your totes around 😮😊❤
When I cut out the door of the tote, I make sure and fill the cut outs with silicone caulk to keep the water out of the tubes. Once they freeze they will rupture the thin tubing. I make a stack of 3 totes on top of each other with my 60hp JD in the pole barn to maximize space.
That's cool. I wondered if anyone stacked them. I like that idea.
Great video Neil 👍. I’ve been using ibc totes for my firewood for years now. Love them, saves the step of me stacking back at shop. I stack In Them and done. I use the tanks for roofs. Cut them in a 45 and make a peaked roof to keep snow off. I cut a year ahead so wood seasons good in totes. Larger tractor so don’t have to worry about lifting, also I have 3 point forks so fill tote on rear first for ballast and then fill front one.
Do know how much a tote full of wood weighs?
I am getting ready to get a tractor and want to make sure I get one with enough lift capacity.
Thanks
@@leovogelgesang4398 Never weighed one but I use the 275 gallon ones am guessing they weigh around 1200 lbs at least. I heap mine full now but have 75 hp tractor. I also have a 30hp JD and before I got my bigger tractor I had to keep them level with the top or it wouldn’t lift them.
Thanks Bob!
Thanks for the input.
The bottom of those cages WILL rust out if not protected. The aluminum cage will be just fine. My brother sells firewood and uses the plastic as a cutoff cap about 12 in. deep and wire tied on the cage with a few holes drilled in the edge to keep rain from soaking the wood directly and air can still circulate with the cap on top.
I use the remainder of one that has had the top cut off of to put water in and drop a leaking tire in to find out the source of the leak. Similar to what a tire repair facility would use.
The plastic insert can also be used as a rain barrel setup off gutters because it already has a built-in spout. Just needs a small platform off the ground to sit on.
City folks might not like it because of the size, but in the country, it works great for rainwater collection even with the top taken off and the birds can always get a drink.
Just a few ideas, hope they give you some more.
My guess is 36 hours per tote.
I appreciate all the great ideas!
Thanks for taking a guess on the hours. I will pin the answer to the top comment with the winners 12/5/22.
Great video! Dad has used these totes for about 6 or 7 years now for his firewood. Based on my deductive reasoning, I’m gonna say 13.25 or 25.25 hours. 😂😂
Really appreciate it Heath!
Thanks for taking a guess on the hours. I will pin the answer to the top comment with the winners 12/5/22.
I don't burn wood, but I have used those IBC totes for other things. The best use was for watering a baseball field infield when I coached at a local middle school. We didn't have access to water on the field so I put a tote on a small trailer and built a gravity fed sprinkler system on the rear so I could water the dirt on the infield to do the field prep before our home games. It worked great but, I found out the hard way that I needed a large vent on the top or the plastic bladder would collapse in on itself. Lol. Love the video, keep on keeping on my friend.
That's a great use for them! I like homegrown stuff like this! Thanks as always BD!
i’m obsessed with your channel love the wood splitter what an amazing design eastonmade should consider making a splitter pallet based with no wheels it would be very sturdy on flat ground
Thanks a lot Tyson!
This was great content. What a organized pocess of cutting wood... I absolutely love your channel sir! The best on RUclips!
I have seen people cut the bladder on a diagonal and use them as rain shields on top of the totes.
Good luck with the totes, I didn’t really like using them and went back to trailers. When really cold a tote would only last me two days and my smaller trailer 7-8 days…and I have several old truck bed trailers. Hours….you were 50 or so.
I could see that. This won't be my end all for handling firewood, but it will be another tool in the toolbox. Thanks for taking a guess on the hours. I will pin the answer to the top comment with the winners 12/5/22.
Always enjoy your videos, thanks for sharing your adventures with us!
FYI, finally got myself a JDeere!! Traded a pickup for a JD750 w/ belly mower and rear scraper. Might also get the leaf vac, but we’ll see.
That's awesome! Welcome to the club. You'll have fun running that around your property for sure.
Keep eye out for 3 point pallet forks for that tractor - I had a set on my 5400. I could carry 2 totes a time.
Nice!
Great video! If you need an interesting project. Find a way to close the levers of the ssqa from the seat of the tractor. Not a bid deal when putting on the grapple. But when you are going from bucket to forks to the trailer mover. It may be a time saver. Just a thought. 😊
Joe Perkins: Check out DIY My Way on youtube. He just recently put out a couple of videos on doing that very thing! Great channel. 😁👨🚒
@@d.a.ballou9740 thank you. I’ll check it out.
I used the plastic tube from my tote as a pool pump and filter tank cover for the winter i cut the biggest side out all the way....after winterizing the pump and tank i wrapped them in a wool blanket and put the tub over them both until spring..works amazing and keeps them from freezing and i dont have to move them around anymore.
We've got probably 10 of these totes to use around the old threshers organization I'm a part of. They're deceptively heavy. I have a 3 point fork adapter that goes on a 45 horse Farmall 504. I can feel the front get light on that tractor.
My cousin uses the plastic to store rain water in for her plants and fruit trees
Neil, I also cut my totes on an angle for the same reason. Then fill with silicone to keep the water out so they don’t freeze and burst. I’m guessing around 84 hrs. Thanks and I will see you in the next one.
Oh that's a good idea too!
Thanks for taking a guess on the hours. I will pin the answer to the top comment with the winners 12/5/22.
I’ve used the totes for last 2 years and it’s great! I got through about 12 totes a year (330gallon larger ones) for about 3-4 cords of wood. Use my skid steer to move from storage place and onto my porch. Works great. Welcome to the IBC club.
Appreciate it Ethan. I saw your email and will respond to that as well. Thanks!
Hey Niel, I left the top rim on my tote frame for strength. Then you can stack them on top of each other. Love your videos!! Barry
Good idea!
I'll go with 12 hrs on one tote .... Great video Neil ...my son uses them for fire wood too said the work great for him...
Thankfully it lasted a bit longer than that. I think I'll like having the totes as another tool in the toolbox for different situations. Thanks for taking a guess on the hours. I will pin the answer to the top comment with the winners 12/5/22.
well i guess i missed that guess on number of hours by a mile LOL
Hello Neil, nice video, as always. And about that wood load, I think it was enought for about 85 hrs. Have a nice week!
Really appreciate it. It didn't last quite that long this time but it might when it isn't so cold. Thanks for taking a guess on the hours. I will pin the answer to the top comment with the winners 12/5/22.
@@digdrivediy about that four plastic big bdc, you can use them for collecting rain water and use it for the yard.
Make sure you put a video out on the PSI increase please! I’ve seen a few of them, but always looking to get the process down to raise the PSI
I made an entire video about it for my 755. It should be a pretty complete tutorial. ruclips.net/video/8pb-rU-tmIc/видео.html
A good back to the roots video. I think TTWT and OWTM must both have Stihl relationships (or used to). You should reach out to them on how they got them, as your subscriber base should be worth something to Stihl in the battery space.
Hey thanks Jim. I know that at least TTWT has a relationship. They don't really sponsor but they will provide product to use in your videos as long as you use proper PPE. I have a contact for them so I'm wanting to reach out since I genuinely love their stuff anyway.
I've been saying the plastic part of the totes can collect water from gutters. Put a hose spigot on and water flower beds.
Yes, very true. That would be a great use of them. But the wife isn't crazy about them sitting around the house :O
I had a similar issue my kioti cx2510 won't lift the tote with oak, but it will lift it with maple. Neat video, its alot of work to heat with wood, it seems free but it's not lol, have a great day.
I cut pool noodles in half long ways and zip tied them around the cut ends of my IBCs cheap and very effective. I’m getting about 6 days out of a full tote that my 4310 struggles a bit to lift. I’m guessing 73 hours
The noodles are a good idea. I could get 73 hrs on warmer days I'm sure but I was a little under that for this test. Thanks for taking a guess on the hours. I will pin the answer to the top comment with the winners 12/5/22.
with the plastic bladder, what you do is cut with a chainsaw down each corner vertically then horizontal so that you end up with two u shaped pieces. put them on an ordinary wooden skid and use wire to connect the vertical sides at top corners. Then go ahead and stack the same as you did with the metal frames. You can now carry a full skid anywhere, store anywhere and best of all carry to the stove without additional touching. add some slots so any water can drain and they will be around for years.
Cool idea!
I say the wood lasted 96 hrs. Check out the ballast box I built for my tractor, 750 lbs from scrap metal and concrete. Great video.
Have the cage lifted while loading to save your back and expedite loading
Good idea!
Nice video. I'm completely clueless about those bins and burning firewood but I know you heat your house and the garage with that boiler so I'll half the average of what I've seen others comment... I'll say 42 hours.
Not a bad guess at all but I got a little more out of it this time. Thanks for taking a guess on the hours. I will pin the answer to the top comment with the winners 12/5/22.
Welcome to the club LOL! I guess 73 hours! I burn all my cookies out of totes and I usually get 2-3 days out of one depending on how cold it is. Stay warm!!
Proud to be a member now :) Thanks for taking a guess on the hours. I will pin the answer to the top comment with the winners 12/5/22.
I always enjoy watching your videos they caught my eye because I have a john deere 755 and 2 john deere 318's and a dump truck and a tractor I do side jobs with but I'm hoping to find a backhoe either a john deer 310 SE or SG or a case 580 SL or SM with a 4 in 1 front bucket
Best of luck! I of course would vote for the John Deere backhoe:)
Neil 97 hrs. great video
Hey Ron! Thanks for taking a guess on the hours. I will pin the answer to the top comment with the winners 12/5/22.
Hey Neil check out In The Woodyard episode 373 about 10 minutes in he shows a good solution to the log lift table on the Axis. Is a hack to make 1 person operable.
Thanks! I'll check it out!
61.25 hours. Great video
You my friend, are EXACTLY correct. You were the only one that guessed 61.25, which was the correct time after showing my watch in the video. Saturday 5pm to Tuesday 6:15am. I'll be glad to send you a DDD sticker if you'd like one. Shoot me your shipping address at "digdrivediy@ gmail.com" and I'll get one sent your way. Thanks for watching and playing along Nathan!
Those John Deere’s are so impressive for their size. My 40hp Kubota struggles to lift one without ballast. It actually wouldn’t lift one without shimmed hydraulics.
Great video, I say 75 hours for the one tote. Keep up the great work love the channel and content. Actually find you through Hometown Acres and Matt's of road.
Oh that's cool! Thanks for checking out my channel Jim. Thanks for taking a guess on the hours. I will pin the answer to the top comment with the winners 12/5/22.
Niel, This was good content. My guess is 49.25 HRs to burn the basket of wood. Carl FONDEROSA FARMS MD
Thanks Carl.
It made it 61 hrs.
I use the icb totes for firewood I cut a hole and the bottom out of the plastic tanks and stack wood inside them in the cage to keep more rain and snow off the wood if they are stored outside. What I’ve found out using the totes it varies the difference between using a small wood stove, fireplace and a outdoor boiler on how small the split their wood on how convenient the totes are they help move wood easier regardless I’m guessing the wood in that tote lasted around 48 hours
I do something similar. I cut the top and the front out. Then just lay the top back on. So I can get in to stack and to empty easier.
Great ideas! I may do something similar with the plastic. We'll see. Thanks for taking a guess on the hours. I will pin the answer to the top comment with the winners 12/5/22.
I’m guessing 85 hours 👍🏻. Take care my friend
Thanks Mike! On warmer days that would be very possible but it didn't last quite that long this time. Thanks for taking a guess on the hours. I will pin the answer to the top comment with the winners 12/5/22.
Great! Another firewood video on RUclips!!!
Hey I've made a lot of videos that aren't about firewood too! People don't watch them as often though...
I think 37 hours is how long tote lasted. Great video. Time to get Tractor Time with Tim to get a hydraulic upgrade to the 750.
I wondered about that hydraulic upgrade! Thanks for taking a guess on the hours. I will pin the answer to the top comment with the winners 12/5/22.
I like using a 6" cut off wheel on a 4.5" grinder to cut the totes. I cut the window wide enough that my shoulders will fit through square. Saves snagging shirts.
If you haven't disposed of the tote bladders yet, I've tried every possible tool to cut them down into manageable pieces and a small chainsaw with an anti kickback chain on it is the quickest.
I stack directly into the tote as I split also, saves me a LOT of handling of the wood, and I've found that tote stacked wood seems to dry faster, since it forces more air gaps than a huge stack of wood.
I have forks on the 580 Case backhoe, so no issue picking up/moving full totes.
Hi Neil, great videos. Really enjoying all of them. One question - why do you stack firewood? If you just throw the pieces into the tote you will get less in them which will make them easier for your tractor to move. You won’t need to cut away the side of the tote as you won’t need access for stacking. The bladders can just be cut into two and screwed to a wooden pallet. This gives you additional storage. Fill as many totes and bladders as you can and just move them as required. They can always be stacked on top of each other. Ends of bladders can be cut and used as roofs. They can also be cut diagonally to make pitched roofs.
Mainly I stack them just so I get more bang for my buck. I grew through so much wood that if I didn't stack it then I would burn through the totes every other day. Probably. Stacking just makes them last longer and saves me from handling more totes and I'll need fewer of them that way. Thanks so much for watching! Really appreciate it.
Always a joy to watch you DIY! love it!
I really appreciate that Rick.
Very nice video again.
I would say 93 hours.
Cheers
The tote didn't make it that long this time. Thanks for taking a guess on the hours. I will pin the answer to the top comment with the winners 12/5/22.
Of the 30 or so tote videos I've watched yours is the first I've seen that loaded it up with boiler sized (very big) splits.
Everyone else had stove sized or very precise fireplaces sized splits.
Their totes weighed between 1000 and 1200 lbs. Depending on the moisture content and wood type.
You might be up to 1350 or 1450 pounds in your bin.
Too.bad I'm not closer, I'd love the bladders for holding maple sap! I have a bunch of the IBCs for firewood and sap storage.
Neil… I’m gonna go with 73.25 hours.
This is a good opportunity for comparing the lift capacity of the 755. On Cap’n Kleeman’s channel, he maxed out his, trying to move lumber for his YT yacht project.
Dan Severn mentioned the ‘Designed’ lift capacity. I interjected that what matters is the ‘working’ capacity. It is found when it is all that the loader can lift before the rear wheels leave the ground.
Having the ability to add weight to the rear and ratchet up the hydraulic pressure introduces another capacity number… the hydraulic seal ‘rupture’ point! I don’t wanna jinx anything but, a really good cylinder or pump rebuild video might gain you a bunch of ‘clicks’ and ‘likes’!!! LOL
I’ve resisted the urge to go with IBC totes, so far. My Kubota BX23S is just too small to handle them. However, you got me to thinking.,. It can certainly lift a half tote! Perhaps I can shift the paradigm…
A half tote would last me three days. That is more than a fully loaded Gator bed.
True, it wouldn’t reduce my handling. Nor, would it be any easier or quicker. However, it would save wear and tear on my Gator’s bed and free it up everyday, for other (more fun) tasks!
That’ll give me something to think about today as I cut some more firewood. Take care bud.
I'm pushing my luck aren't I! ;). I'm trying to make that little 'ole 755 more of a tractor than it was meant to be and I'll find the breaking point one of these days for sure. Someone in the comments mentioned a 3pt hitch to SSQA adapter so that I could put my forks on the back. That might be a good option for some of us guys with smaller tractors to still utilize our pallet forks and move a little heavier items if not trying to lift them too high.
I can get along without the IBC totes like normal. But it has been a fun experiment. RUclips makes me feel like I was really missing out so I had to give it a chance. It will certainly be nice for loading out at the slab when I need a quick load to get me through a couple days.
Thanks for taking a guess on the hours. I will pin the answer to the top comment with the winners 12/5/22. (you were too generous with your guess by12 hours)
I use the plastic liner for a swimming pool for my new 4-H pigs. Just cut 6" high.
Another great video. I use IBC totes for several different uses. I’m guessing 64 hours of wood.
You are very close but overshot just a bit. Thanks for taking a guess on the hours. I will pin the answer to the top comment with the winners 12/5/22.
Depending on if you've got any plastic tubs left, you could possibly use them for water collection during the rain season. I'm working on convincing my parents to get a small 4' wood rack to put behind our shed. Hope next year at some point you and Mike can do something together since I think it'd be fun.
Great idea Robert!
Awesome setup! I like the flow you have now. You have done a lot of work this year to make this efficient!!…. I like the use of the totes.
The problem I see is being able to stack them so you use up the total height.
I am definitely going to be saving my Pennies to work towards some like this!
Yeah, I still have to stack quite a bit. But this will give me some options for sure.
Glad to see you back this week. It looks like lifting the totes was a little much so just don't fill them as much or set some by the boiler and transfer from one to the other. Yeah, more handling but you may not get stuck when you have snow and ice on the ground. Here is another idea, get a bigger tractor, Tractor time with Tim could help you out, lol. Just kidding...
I like that bigger tractor idea.
Just eat a lot more for Christmas dinner to put some weight on the seat LOL Merry Christmas and a Prosperous New year to you and your family
Thanks! Same to you Stuart.
Totes are nice because you don’t have to handle the wood as much. But for your use you will have to stack some for volume of wood you need.
good way to move wood, good job.😁👍i say 73 hours.
That's a little high but would be right on the money if it weren't as cold. Thanks for taking a guess on the hours. I will pin the answer to the top comment with the winners 12/5/22.
I'd like to see you test a Halverson 150 wood processor that mounts on a skid loader. They look awesome!
Just an idea for some extra counterweight, I’ve got a john deere 4300 and have a barrel filled with concrete as a counter weight. It’s got a 3 point link bar set in the middle but towards the top so it doesn’t spin about it just hangs on the 2 points with no top link needed. It works super well and comes on and off super easily if need be. You could maybe part fill a barrel and use the top portion for chains/ rope or tools
hi from france very beautiful video
Hello France! Merci!
Fun video, Neil! I don't have any idea how much your average daily consumption of wood might be, so I have nothing to base my guess upon. However, my silly estimate is 87 hours... I wasn't sure your tractor would make the challenge! Be well, be safe!
I wasn't sure it would make the challenge either! :)
Thanks for taking a guess on the hours. I will pin the answer to the top comment with the winners 12/5/22.
Neil did you ever think about putting a solar light yard by your wood pile so after work you can actually work a little longer making what when it gets dark
I've got some ideas for some lights.
Neil, some people have no idea of the calculated risks that is taken to get work done, I'm thinking you should put a roll over protection with roof at the operator station on your wood splitter to prevent getting hit with an asteroid, (sarcasm) lol
Haha! So true. A chainsaw in itself is a crazy thing to have anywhere near your body! :)
Hello Neil great video me and my son always look forward to Sunday night which is when we watch your new video!! Keep up the good work!! And I think it took 49 hours to burn that tote of wood!!
I really appreciate your viewership Steven! Thanks so much for watching. Thanks for taking a guess on the hours. I will pin the answer to the top comment with the winners 12/5/22.
Great vid! My guess is that wood lasted 48 hrs
Thanks for taking a guess on the hours. I will pin the answer to the top comment with the winners 12/5/22.
The bladders make a good septic tank up at the hunting camp