Ok prime example of how you solved a major problem for me when I saw Mike valley and he would teach how to do this he always said the phrase. LOOSE TO TIGHT ! And I never knew what that meant until now how you started loose with the red then got tighter with the orange and finally tightest with the yellow how you filled the inside of the red with orange and the inside of the orange with the yellow now I finally understand after a year of frustration of the phrase LOOSE TO TIGHT ! Thank you seriously from the bottom of my heart for showing and telling me how to start loose and bring it in tight because when I would lay down orange I’d go outside the red and it looked stupid and I’d get pissed and quit but now I know how to do it right ! Brother you just saved me an aneurism!!
The new intro is 🔥. The tumbler is 🔥. Haven’t had a chance to watch the entire video. Packing up for this road trip but definitely will watch and learn. 👍🏽
Nice work Jake. For someone to do a vid on real fire and starts off saying I'm not very good at this in my opinion is brave so hats off to you as it turned out looking so good Mate and you didn't mention using bleed checker did you not use it for this or does the 4050 mixed with the candy stop the bleeding.. Oh yeah I forgot to ask did you get any work from the car show in your last vid when you had your own booth set up Mate..
ThankZ man! 4050 does help to reduce bleeding. I just made sure not to pound the white on, otherwise there could be some bleeding. And bleeding with true fire isn’t really an issue, since it will just give u similar tones and maybe even more depth and color range. Car show was a bust. Maybe had 10 people stop by, no real potential customers. Was raining the whole time, and poring out most of it. I was also in a bad location, end of it where most people didn’t even make it down to. My 2 showZ next week look to have great weather. Good thing because my work is done to be in the sun. Will do another true fire vid. I’ve done 4 more cupZ after this one and learned a lot and getting decent at it now.
I don't know how well you take criticism and it doesn't really matter to me, but what you have just shown is how to airbrush realistic flames inside-out. The theory of starting loose and ending tight is correct, but you sprayed the colors in reverse of the way they should be laid down. Its always light to dark. Not light, dark to light. The last color before the highlights should be the darkest color and then add highlights at the end. If youve been unable to figure out why your flames dont look right then now you have your answer. Youll be surprised how good the flames will look when done correctly. I hope that you use my advice and begin creating amazing realistic fire. By the way... Mike Lavalle was the undisputed king of True Fire. Watch the way he works and build up from that. Also, Craig Frazier is very good at this as well. Check out some of his videos. Side note: Theres no such thing as opaque candies. All candies are transparent.
@@ArcAngel572nc I’ve bought all Mike’s videos and watched many times and know Craig and watched most of his videos as well. I’d love for u to find and share any video of someone painting true fire light to dark. That is completely backwards🤦🏻♂️ I never said candies r opaque. I said u can use opaque colors if u don’t have candy. U obviously have not watched any of my other videoZ. I clearly know what I’m doing with candies. They’re my favorite thing to spray and I’d say I’m pretty good at it. Sorry but won’t be taking ur backwards advice. This video is quite old and was learning to do true fire. I’m much better now. Sure there is more recent fire in my Shorts videos. I’ve traveled the country to train with the best of the best the last 3yrs or so. And know where I stand. Even got selected to be one of 100 artists internationally to be in the Battle of the Boards. But would really love for u to post a link to a video of ANYONE painting true fire light colorZ to dark colorZ!!!
Awesome man🤘🏻If u don’t already, follow me on FB and Instagram. Links are at the bottom of the description in every video. Would love to see ur progress into airbrushing.
U can do this with any color. I start with the darkest tone of that color, and work my way to the lightest of that tone. Blues for example with Createx Candy2o, I would start with Midnight Blue(red step), Marine Blue(orange), then Caribe Blue(yellow) for the final. I’ll be doing some varied color flames soon and will do more vidZ on them showing how I do them.
For some reasons I have always battled this fire and of course bought the high dollar videos from some certain someone but he leaves out all the very first stages of realistic fire and I gave up on it but I’ve learned in fifteen minutes watching you what they couldn’t show me in years. Thanks for the videos.!!!! Looks great.!!!!
ThatZ awesome man! Love when I can help out. I watched/bought all the vidZ too. Didn’t learn much either. I just had to do it over and over until I learned on my own. Just gotta hang in there man, u got this!!!
It's very easy to learn to do something the wrong way and hard to learn how to do it right. What he has just shown everyone is the completely backwards way of doing realistic flames!!! 🤣🤣🤣🤣
U obviously don’t paint🤦🏻♂️. If ur ArcAngelArts on Instagram, u have no right telling anyone how to paint. I’m doing it as every airbrush artist does it. Please find me one video of someone painting true fire light to dark. Per Mike Lavallee, loose to tight, dark to light.
Awesome man! Appreciate ur support. It doesn’t have UVLS in it, but uses the same resin as the UVLS. They flow and cover amazing!!! Not sure if all Wicked has changed to the new resin yet, but the Opaque Wicked colors all have.
ThankZ Herbie!!! They’re double walled stainless steel ones from Walmart, same price. I like these ones because they’re straight walled. Easier to lay vinyl on without distorting the image/logo/lettering. I don’t have a Michael’s anywhere near me in ‘middle of nowhere’ Iowa 😂.
@@aymenyaqoob1009 Hell yeah man! Glad this helpZ. And I want to see ur attempts, all of them. PM them to me if u don’t want to show them publicly. It’s taken me years to be confident enough to show any of mine. They’re a lot harder than they look. And I’m starting to become a badass, not quite there yet I my eyeZ, but we are our own worst criticZ. Ur a badass brother! Hope my striping can get to ur level one day🤘🏻 BrusHstroKeZ Airbrush & Design= B.A.D.😉
Are those kandies safe to breathe or do you recommend a mask? Btw.... compressor, disconnect ,hose and gas creos airbrush arrived. Waiting on reducer and I'm ready to teach myself
Amigo hola que hermozo trabajo, mi duda es tu das sombras y luces en loa fuegos alejando y acercando el aerogrago y ese creos es genial la esta rompiendo por su precio comparado a los iwata
I’m super busy right now, so don’t have time to make anymore and not sure I have more mylar to make them. U can find them all over the place. Just search freehand shields for airbrushing.
Or give credit to who actually designed the true fire templates and realize you could get sued for claiming them as your own and selling them for money
I just used the new formula of Wicked Jet Black with a little 4011 reducer, no 4050. The new Wicked formula has some of the 4050 resin in it already so no need to add any to it. Then I painted directly on that without adding/using any 4050. Only used 4050 with the candies.
On white, u definitely want to put down black first. I would but the black down to look like smoke, then do the flameZ inside the smoke/black area. If ur using candy, you’ll want to make sure to be precise with the candy and only spray the flames. U don’t want candy on the white area.
No I don’t. I have a couple of tumblerZ to clear tonight. I’ll try to remember and make a vid for ya. They’re for a customer and delivering them next Wednesday. So might not be able to post until after then. But I’ll ask him if I can post before he sees/gets them.
Brother you make it look so easy ! This technique is so frustrating and irritating I can’t tell you how many times I wanted to throw my Iwata micron across the room ! Trying trufire I cursed Mike valley so many times his ears had to be burning but you explained it so awesomely and simplistic you say your not that good with tru fire I think your better than Mike see Mike wants you to buy his $200 Cd set them he’ll show you how to do trufire and even then he doesn’t explain it or doesn’t share is trade secrets to make the fire twirl like yours but you showed me how to make it move through and this summer I’m invited to the LA LOWRIDER MAGAZINE CONVENTION and I will be using your technique for any client I do with trufire and I will give you credit for your instructions and give your channel the credit so if that’s cool ? I already have 2 canvas orders for Chicano women with the clown faces and a flaming skull so I’ll be doing your technique for my entry and also I’ll be entered into the sparmax international airbrush contest and I’m doing the selection of fantasy stylization and I’ll be doing the grim reaper with trufire your technique so thank you for all your help YOU ROCK 🤘🏻🤘🏻!! Marc ( EL PADRE AIRBRUSH )
Dude! This makeZ my day🤘🏻 So glad u found it helpful. I had really struggled with true fire myself until I understood the concept. Would love to see ur progress with it. Add me on social media. My links are in the description of every vid. I had a booth at my first Lowrider show just last fall. Have fun man🤘🏻
@BrusHstroKeZ you're video inspired me to LEARN TRUE FIRE. I've learned kustom paint and pinstriping and next was the AB. Just never got around to it.... 20 yrs later...I want to learn TRUE FIRE. I actually bought Lavallees templates and a iwata hp vs....just never did n e thing with them. My question to you is.... if I sent you a one of those cups in flat black... what would you charge me to apply to your to it?
@@602Pinstriping So awesome that I’ve inspired u!!! ThatZ what starting this channel was and is all about. Inspiring and helping otherZ pursue this passion! I get $65 for my fire tumlerZ, using $5 tumblers that I get in bulk. So I’d have to charge $60 for the artwork and clear coat. I don’t like to turn away business, but would encourage u to bust out the airbrush and paint your own. If ur set on getting some of my work, head to my website for all my contact info, BrusHstroKeZ.com. ThankZ for ur support!
Ok prime example of how you solved a major problem for me when I saw Mike valley and he would teach how to do this he always said the phrase. LOOSE TO TIGHT ! And I never knew what that meant until now how you started loose with the red then got tighter with the orange and finally tightest with the yellow how you filled the inside of the red with orange and the inside of the orange with the yellow now I finally understand after a year of frustration of the phrase LOOSE TO TIGHT ! Thank you seriously from the bottom of my heart for showing and telling me how to start loose and bring it in tight because when I would lay down orange I’d go outside the red and it looked stupid and I’d get pissed and quit but now I know how to do it right ! Brother you just saved me an aneurism!!
The new intro is 🔥. The tumbler is 🔥. Haven’t had a chance to watch the entire video. Packing up for this road trip but definitely will watch and learn. 👍🏽
ThankZ man! It’s a long vid, so don’t expect anyone to watch it all. I’ll do a shorter version when I can. Save travelZ my friend🤘🏻
Nice work Jake. For someone to do a vid on real fire and starts off saying I'm not very good at this in my opinion is brave so hats off to you as it turned out looking so good Mate and you didn't mention using bleed checker did you not use it for this or does the 4050 mixed with the candy stop the bleeding.. Oh yeah I forgot to ask did you get any work from the car show in your last vid when you had your own booth set up Mate..
ThankZ man! 4050 does help to reduce bleeding. I just made sure not to pound the white on, otherwise there could be some bleeding. And bleeding with true fire isn’t really an issue, since it will just give u similar tones and maybe even more depth and color range. Car show was a bust. Maybe had 10 people stop by, no real potential customers. Was raining the whole time, and poring out most of it. I was also in a bad location, end of it where most people didn’t even make it down to. My 2 showZ next week look to have great weather. Good thing because my work is done to be in the sun. Will do another true fire vid. I’ve done 4 more cupZ after this one and learned a lot and getting decent at it now.
I don't know how well you take criticism and it doesn't really matter to me, but what you have just shown is how to airbrush realistic flames inside-out. The theory of starting loose and ending tight is correct, but you sprayed the colors in reverse of the way they should be laid down. Its always light to dark. Not light, dark to light. The last color before the highlights should be the darkest color and then add highlights at the end. If youve been unable to figure out why your flames dont look right then now you have your answer. Youll be surprised how good the flames will look when done correctly. I hope that you use my advice and begin creating amazing realistic fire. By the way... Mike Lavalle was the undisputed king of True Fire. Watch the way he works and build up from that. Also, Craig Frazier is very good at this as well. Check out some of his videos. Side note: Theres no such thing as opaque candies. All candies are transparent.
@@ArcAngel572nc I’ve bought all Mike’s videos and watched many times and know Craig and watched most of his videos as well. I’d love for u to find and share any video of someone painting true fire light to dark. That is completely backwards🤦🏻♂️ I never said candies r opaque. I said u can use opaque colors if u don’t have candy. U obviously have not watched any of my other videoZ. I clearly know what I’m doing with candies. They’re my favorite thing to spray and I’d say I’m pretty good at it. Sorry but won’t be taking ur backwards advice. This video is quite old and was learning to do true fire. I’m much better now. Sure there is more recent fire in my Shorts videos. I’ve traveled the country to train with the best of the best the last 3yrs or so. And know where I stand. Even got selected to be one of 100 artists internationally to be in the Battle of the Boards. But would really love for u to post a link to a video of ANYONE painting true fire light colorZ to dark colorZ!!!
@@ArcAngel572nc Maybe u need a refresher on DARK to LIGHT: ruclips.net/video/96O1K4N_g2Y/видео.htmlsi=aLdV1gibg5rSKQ8C
@@ArcAngel572nc The master dark to light: ruclips.net/video/4G67hN_8HbU/видео.htmlsi=HIVwnXkZmsE54U82
PS 290 is my next buy
Picked up a AB compressor, GIS CREOS AB, disconnect and hose.
Awesome man🤘🏻If u don’t already, follow me on FB and Instagram. Links are at the bottom of the description in every video. Would love to see ur progress into airbrushing.
Looks amazing I have a question if I wanted to add some candy blue into the flame What colors would I add in between?
U can do this with any color. I start with the darkest tone of that color, and work my way to the lightest of that tone. Blues for example with Createx Candy2o, I would start with Midnight Blue(red step), Marine Blue(orange), then Caribe Blue(yellow) for the final. I’ll be doing some varied color flames soon and will do more vidZ on them showing how I do them.
For some reasons I have always battled this fire and of course bought the high dollar videos from some certain someone but he leaves out all the very first stages of realistic fire and I gave up on it but I’ve learned in fifteen minutes watching you what they couldn’t show me in years. Thanks for the videos.!!!! Looks great.!!!!
ThatZ awesome man! Love when I can help out. I watched/bought all the vidZ too. Didn’t learn much either. I just had to do it over and over until I learned on my own. Just gotta hang in there man, u got this!!!
It's very easy to learn to do something the wrong way and hard to learn how to do it right. What he has just shown everyone is the completely backwards way of doing realistic flames!!! 🤣🤣🤣🤣
U obviously don’t paint🤦🏻♂️. If ur ArcAngelArts on Instagram, u have no right telling anyone how to paint. I’m doing it as every airbrush artist does it. Please find me one video of someone painting true fire light to dark. Per Mike Lavallee, loose to tight, dark to light.
Just bought a paint set. See if you get the points. Wicked color. Did you say that the wicked already has the uvls in it?
Awesome man! Appreciate ur support. It doesn’t have UVLS in it, but uses the same resin as the UVLS. They flow and cover amazing!!! Not sure if all Wicked has changed to the new resin yet, but the Opaque Wicked colors all have.
Did you ever make a true fire video using the red,yellow and ornange base?
No, I didn’t. I tried it, and it just doesn’t look right. Candies r the way to go.
Nice to watch great job. Are they aluminum tumblers. Michael's had then for @ 9 bucks.
ThankZ Herbie!!! They’re double walled stainless steel ones from Walmart, same price. I like these ones because they’re straight walled. Easier to lay vinyl on without distorting the image/logo/lettering. I don’t have a Michael’s anywhere near me in ‘middle of nowhere’ Iowa 😂.
Sweet...
ThankZ 🤘🏻
A M A Z I N G
ThankZ brother🤘🏻 Hope this helpZ u. I’ll be making more on fire, getting better and learning more since this one.
@@BrusHstroKeZ it’s perfect bro I love it and I’m gonna try it, you’re badasss bro
@@aymenyaqoob1009 Hell yeah man! Glad this helpZ. And I want to see ur attempts, all of them. PM them to me if u don’t want to show them publicly. It’s taken me years to be confident enough to show any of mine. They’re a lot harder than they look. And I’m starting to become a badass, not quite there yet I my eyeZ, but we are our own worst criticZ. Ur a badass brother! Hope my striping can get to ur level one day🤘🏻 BrusHstroKeZ Airbrush & Design= B.A.D.😉
Just bought some stuff with your link,awesome video. 15.92
Sweet man! Truly appreciate ur support🤘🏻 Doing the prizes for the first 3 people that ordered stuff before this video though.
Allgood bro,just wanted to show some support even if it was just a small purchase ,thank you for everything and keep posting these awesome videos!
good job bos
ThankZ man!
Are those kandies safe to breathe or do you recommend a mask?
Btw.... compressor, disconnect ,hose and gas creos airbrush arrived. Waiting on reducer and I'm ready to teach myself
No paint is safe to breathe. But they are waterbase, so no solvents. Don’t smell as bad or give me headaches like solvents do.
@@BrusHstroKeZ do you recommend a respirator?
@@602Pinstriping Yes, one with a carbon in the filters. I wear a RZ Mask (brand that makes comfy ones) when spraying Createx/water base paint.
Amigo hola que hermozo trabajo, mi duda es tu das sombras y luces en loa fuegos alejando y acercando el aerogrago y ese creos es genial la esta rompiendo por su precio comparado a los iwata
Sorry man, can’t comprehend, not even in translation. Appreciate ur support though🤘🏻
Consulta como se llama ese paño azul que ocupas en tus videos ese azul
Try setting your tumbler straight up and down.
Yeah, I made a lil rig for standing them up straight. I have a more recent video doing fire on a tumbler and had it up and down in that vid.
In regards to the TEMPLAYES used....do you cut your own (cricut)??
Yes, I made them with my plotter.
@@BrusHstroKeZ if you could please
@BrusHstroKeZ can I purchase some of those from you (templates)??
I’m super busy right now, so don’t have time to make anymore and not sure I have more mylar to make them. U can find them all over the place. Just search freehand shields for airbrushing.
Or give credit to who actually designed the true fire templates and realize you could get sued for claiming them as your own and selling them for money
Hey again. On the base coat did you mix the black and 4050 or paint 4050 on top. Which is better
I just used the new formula of Wicked Jet Black with a little 4011 reducer, no 4050. The new Wicked formula has some of the 4050 resin in it already so no need to add any to it. Then I painted directly on that without adding/using any 4050. Only used 4050 with the candies.
just ordered some wicked black thanks.
30 bucks let me know if you get the link
Sweet! Good stuff.
You would make a mint if you sold vinyl wraps of this.
ThankZ for the suggestion. But not my thing. I love my paint!!!!!
If I started out on a white box to flame what would black look like as flame starters
On white, u definitely want to put down black first. I would but the black down to look like smoke, then do the flameZ inside the smoke/black area. If ur using candy, you’ll want to make sure to be precise with the candy and only spray the flames. U don’t want candy on the white area.
Have you ever burnt copper wire and seen the colored it puts off ca that be done.
No, I haven’t. It can definitely be done.
Do you have a clear coat video for these
No I don’t. I have a couple of tumblerZ to clear tonight. I’ll try to remember and make a vid for ya. They’re for a customer and delivering them next Wednesday. So might not be able to post until after then. But I’ll ask him if I can post before he sees/gets them.
Brother you make it look so easy ! This technique is so frustrating and irritating I can’t tell you how many times I wanted to throw my Iwata micron across the room ! Trying trufire I cursed Mike valley so many times his ears had to be burning but you explained it so awesomely and simplistic you say your not that good with tru fire I think your better than Mike see Mike wants you to buy his $200 Cd set them he’ll show you how to do trufire and even then he doesn’t explain it or doesn’t share is trade secrets to make the fire twirl like yours but you showed me how to make it move through and this summer I’m invited to the LA LOWRIDER MAGAZINE CONVENTION and I will be using your technique for any client I do with trufire and I will give you credit for your instructions and give your channel the credit so if that’s cool ? I already have 2 canvas orders for Chicano women with the clown faces and a flaming skull so I’ll be doing your technique for my entry and also I’ll be entered into the sparmax international airbrush contest and I’m doing the selection of fantasy stylization and I’ll be doing the grim reaper with trufire your technique so thank you for all your help YOU ROCK 🤘🏻🤘🏻!!
Marc ( EL PADRE AIRBRUSH )
Dude! This makeZ my day🤘🏻 So glad u found it helpful. I had really struggled with true fire myself until I understood the concept. Would love to see ur progress with it. Add me on social media. My links are in the description of every vid. I had a booth at my first Lowrider show just last fall. Have fun man🤘🏻
Quick question, I wonder if he is still responding to his messages
Who u talking about? Me? I alwayZ respond to comments. I miss some but eventually see them and reply. U have a specific question I can help with?
@BrusHstroKeZ you're video inspired me to LEARN TRUE FIRE. I've learned kustom paint and pinstriping and next was the AB. Just never got around to it.... 20 yrs later...I want to learn TRUE FIRE. I actually bought Lavallees templates and a iwata hp vs....just never did n e thing with them. My question to you is.... if I sent you a one of those cups in flat black... what would you charge me to apply to your to it?
@@BrusHstroKeZ thank you for lighting the fire bug in me sir
@@602Pinstriping So awesome that I’ve inspired u!!! ThatZ what starting this channel was and is all about. Inspiring and helping otherZ pursue this passion! I get $65 for my fire tumlerZ, using $5 tumblers that I get in bulk. So I’d have to charge $60 for the artwork and clear coat. I don’t like to turn away business, but would encourage u to bust out the airbrush and paint your own. If ur set on getting some of my work, head to my website for all my contact info, BrusHstroKeZ.com. ThankZ for ur support!
@@602Pinstriping This makeZ my day man🤘🏻
Toll..
What?
Buddy.. Make sure you clear your throat when making videos.. Maybe sip a drink as you go.. Some us can't watch/(listen) without striking a phobia..
ThankZ for the tip. I have a mic now so sound should be better on newer vidZ.