After WW2 in the Philippines the U.S Army left so many Jeeps. The country turned them into Taxis. Customized them with deferent paint jobs and rim's. Lol!!.
It's great that the people of the Philippines made good use of them! They didn't let them go to waste but were thankful for the free vehicles they got.
Those jeeps are for official use only and were used as service vehicle of Doctors in all municipalities especially in the provinces, heads of some offices, and also serves as ambulance in the 50's and 60's.
I believe that this jeep is a CJ3A which was a civilian version. This is because: 1.Front bumper gusset is straight whereas MB had a Y-shape bumper gusset . 2.On the dashboard data plates are not placed where they should be and the glove box is not present, which is similar to that of a CJ3A. 3.Wiper used to be manually operated, electronic wipers were introduced later. 4.Gearbox is T90 not a T84. 5.Rear axle is semi-floating, whereas MB had a full floating rear axle. 6.Rear tool box is not present. 7.Rear body floor is striped whereas Willys MB had a plane floor. 8.Exhaust is wrongly placed. 9.Torque reaction spring is not present. 10.The rims are not combat wheels. Unfortunately, it is not an original one.
Or a CJ2A. Where the steering wheel column goes into the dash. The True MB has the dash straight across whereas the civilian like this on, has the little up divot in the dash. Also the body on the side there are no indents for the shovel....etc. So yeah... A Sweet CJ but not an MB.
could someone offer their opinion. In the 1960's, in Arizona, a high school buddy's father collected cars. Among others in the garage he had a 1960's Corvair with the turbocharged Spyder engine, a brand new '63 Split window Corvette, a beat up Dodge Power-Wagon being restored and a beat up WWII era Jeep. This is 60 years ago, recalling details is a little sketchy and although everyone wanted me to be impressed with the PowerWagon my attention was focused on the Corvette. I simply walked past the Jeep and noticed a large bullet hole in the body near the door opening. The body at that location was not sheet metal, the “bullet” hole edge had extruded out like a typical tank armor hit. The hole might have been bigger than my thumb, but I was pretty skinny back then. I inspected the bullet hole and I guessed the body appeared to be about 1/2 or 3/4" thick. Hard to tell. The father told us that the metal was aluminum and I thought at the time for reduced weight. But at the time I was puzzled “if they were trying to reduce weight why so thick?” Now I am thinking that it might have been Dural that was also used in aircraft armor. Possibly the armor was on the bottom and wrapped around the bottom of the side panels? Like I said, the aqua blue colored Corvette had my attention and I did not do much investigating. Did Willys or Ford produce an armored version? Was it common? Rare? Was an armored version intended for special people? i.e. did Patton have one? I doubt that this jeep saw combat. The Jeeps were probably left to rot in Europe and few if any made it back state side. I don’t know. Maybe it was a factory one-of experimental mockup with a test shot? Any thoughts on this?
The fact it was a vehicle without a real roof would render any sort of armour pointless, don’t you think? It was put together so quickly when the us jumped into the war, I doubt any sort of “armoured prototypes” were even attempted. And they had so many of them in the European theatre, they wouldn’t waste the effort to bring them back after war’s end. I’ve seen footage of trucks being dumped into the ocean off of aircraft carriers, like helicopters after Vietnam. As for the corvair, the spyder designation only referred to the convertible version, nothing to do with the engine.
@@MrJett1971 thanks for the insight. I am not a war buff, did they have land mines in WWII? Could it have been for the under the carriage? Were grenade attacks of occupants common? I have tried to make sense of what I remember. I took the father's explanation as fact. But later thought "why so thick?" Like I said I wanted to get into the Vette and only investigated the bullet hole itself.
My grandfather owns one and were restoring it because he left it to rust cause he never need to use it but now he wants to restore it so I can’t wait till it’s done
My grandfather drove this in Normandy when he was in the G2 section (Army Intelligence). He said it was one of the unsung heroes of the war! It was rough, tough, easy to fix and could drive over anything! My grandpa watched this and said "Tell them to use their toe to start the car and use their heel to throttle in the gas, that's how we did it and it worked".
Wow, that's amazing! We have our freedom thanks to your grandfather and his fellow soldiers and I feel honored that you showed him our video. Next time I drive a Willy's, I will try to start it like that!
Yup this is a post was Jeep Cj jeep ..No Axe and shovel pressings on the drivers side ..Slots in the bottom of the body near the foot steps. corrugated rear wheel arch tops. The shape to the cutout above the steering column plus many other features as mentioned by others ..
Really awesome. I have learned some new things about the Willis I never knew about. The reverse is in the position of the first gear and the first gear in the position of the second gear.
@@donaldleavy4379 , I was not looking for a detailed engineering analysis. I just wanted to see the car, hear the car, and get some basic information. It was fun. I think it would help you if you would stop browsing through few minutes videos hoping to learn how to build a car. I found exactly what I was looking for, you didn't.
My grandfather told stories of how his Jeep saved his life 4 times during the war. Scouting vehicle, fire support, ammunition carrier and finally as a medevac unit, the Jeep carried Granddaddy and his Ma Deuce into battle and brought the pieces back afterwards.
Go to the Philippines. You will see plenty of customized Jeeps as public transportation. They call them Jeepnys. The U.S left so many behind after WW2. They made use of them. It's kind of a symbolic with this Jeeps in that country.
After the army retired them from the war scenarios. They were used in 88m training to cross small and shallow creeks don't know nowadays. Many of them were cut in parts and dropped into the sea to create artificial corals.
Real Jeeps honor the Willys MB configuration. 2 doors or none is better, round headlights and a soft top - down is always better. The rest is misc garbage not worthy of the wave. Love this Jeep. 🇺🇸 What is that thing on the left?? Give that back to your grandma, she's going to miss her bingo games.
Tonhão garage Ramos my dad had a few of original Jeeps in those early days and I still remember my dad always mention of this exact Jeep as Willys Jeep in the early sixties... interestingly
For the purist, its 56 BHP, not 60, the only electric wipers they had in the war was on Canadian jeeps, and that was drivers side only, nice jeep but it has been Bastardised.
The army began to retired the Willy after Vietnam war because they flipped over during the 2nd world war they used them in Vietnam bases , cities and airfield camps because it was flat terrain. In Europe the geographical scenario was a challenge. The jeep can't go faster than 40mph and take a close curve without flipping over. Many accidents and deaths.
I can still see a Willys running along Aguinaldo Highway in Cavite driven by an old man with a cowboy hat. The tools are still intact on the side of the jeep that includes shovel, ax and grub hoe and at the back is a water container with markings.
Nice old jeep but better get that left front wheel bearing checked. Too bad the currently produced offerings are such junk (check just about any worst car list).
what you say is in theese video is not true !! it is not an original MB JEEP, its a CIVILIAN CJ2A JEEP with some military MB parts : front grille , and windshield , no more !! its a very bad copy !!
How do you tell the differences? I am very curious since I am more of an expert on Kübelwagens and telling the differences between originals and beetle reproductions.
@@MistahFox Look at the body next to the driver, there is a drain opening, it does not have the military version, nor is the shovel and ax housing stamped on the body on the driver's side, there are many more differences.
That Jeep needs some work done on it..drivers front wheel bearing is probably on it's way out and that foot starter switch is just all wrong. It also needs a service on the caburetor too. If looked after these cars are literally bullet proof.
Any issues with electronics or oil pressure. Both issues on mine. Rebuild, needed, new wiring harness too, also need to convert away from the 6volt system. Not handy
Yes, same with this one. The electrical system had been converted, but not in a proper way. One of the two batteries was draining very rapidly. We didn't have the vehicle long enough to figure out what was going on unfortunately.
Thank you Sandeep! No offense taken at all! You are definitely right about the wheel. I do not own the vehicle though, it was for sale at the sponsoring dealership at the time.
I think that isnt war jeep, it looks like french hotchkiss, different starting button, missing box under production gambles, two accumulator seats and french antenna.
I've started to notice they use British fire extinguishers on these and noticed the Rifle mounts on upside down, and didn't the have leather grommets on rhe bottom of the shifters?
+Lex Koster After its service for the US Army, this Jeep has been adopted for and used by the Belgian army until sometime in the 80's. That might be why some original details have been altered or removed.
What you have demonstrated is a post-war CJ2A - Civilian Jeep, made up to look like a WWII army jeep. It was manufactured AFTER WWII, and was never a US army jeep..........!
Rear Axel looks different than original, bumperets are upside down, and the pioneer tool side for the driver area are not there. You're driver tire is warped. The steering box pivot is on the Radiator support. The wwii jeeps has the steering pivot on the Axel. Sorry, but this is a converted CJ2A.
Yes; unfortunately they didn't have the production capacity needed to supply enough jeeps. In the end no one did though so three manufacturers ended up making them.
After WW2 in the Philippines the U.S Army left so many Jeeps. The country turned them into Taxis. Customized them with deferent paint jobs and rim's. Lol!!.
It's great that the people of the Philippines made good use of them! They didn't let them go to waste but were thankful for the free vehicles they got.
Pakyu
Those jeeps are for official use only and were used as service vehicle of Doctors in all municipalities especially in the provinces, heads of some offices, and also serves as ambulance in the 50's and 60's.
Correction. The body of the jeep shown is NOT a Willys MB. It is a Willys CJ2A which was a civilian jeep made after the war.
Didn’t the Jeep you describe have the fuel (not gas) filler on the outside?
The grin on the driver says it all.
He loved the car!
The true flat fender jeeps (GPW, MB, CJ2, M38) are extremely fun to drive
I believe that this jeep is a CJ3A which was a civilian version. This is because:
1.Front bumper gusset is straight whereas MB had a Y-shape bumper gusset
.
2.On the dashboard data plates are not placed where they should be and the glove box is not present, which is similar to that of a CJ3A.
3.Wiper used to be manually operated, electronic wipers were introduced later.
4.Gearbox is T90 not a T84.
5.Rear axle is semi-floating, whereas MB had a full floating rear axle.
6.Rear tool box is not present.
7.Rear body floor is striped whereas Willys MB had a plane floor.
8.Exhaust is wrongly placed.
9.Torque reaction spring is not present.
10.The rims are not combat wheels.
Unfortunately, it is not an original one.
Thank you for the detailed analysis. It is hard to see the distinction when you're not too familiar with the model.
Or a CJ2A. Where the steering wheel column goes into the dash. The True MB has the dash straight across whereas the civilian like this on, has the little up divot in the dash. Also the body on the side there are no indents for the shovel....etc. So yeah... A Sweet CJ but not an MB.
No Pioneer tools identation too Hood number = year 1943.
The war time classic that never gets old
could someone offer their opinion. In the 1960's, in Arizona, a high school buddy's father collected cars. Among others in the garage he had a 1960's Corvair with the turbocharged Spyder engine, a brand new '63 Split window Corvette, a beat up Dodge Power-Wagon being restored and a beat up WWII era Jeep. This is 60 years ago, recalling details is a little sketchy and although everyone wanted me to be impressed with the PowerWagon my attention was focused on the Corvette. I simply walked past the Jeep and noticed a large bullet hole in the body near the door opening. The body at that location was not sheet metal, the “bullet” hole edge had extruded out like a typical tank armor hit. The hole might have been bigger than my thumb, but I was pretty skinny back then. I inspected the bullet hole and I guessed the body appeared to be about 1/2 or 3/4" thick. Hard to tell. The father told us that the metal was aluminum and I thought at the time for reduced weight. But at the time I was puzzled “if they were trying to reduce weight why so thick?” Now I am thinking that it might have been Dural that was also used in aircraft armor. Possibly the armor was on the bottom and wrapped around the bottom of the side panels? Like I said, the aqua blue colored Corvette had my attention and I did not do much investigating. Did Willys or Ford produce an armored version? Was it common? Rare? Was an armored version intended for special people? i.e. did Patton have one? I doubt that this jeep saw combat. The Jeeps were probably left to rot in Europe and few if any made it back state side. I don’t know. Maybe it was a factory one-of experimental mockup with a test shot? Any thoughts on this?
The fact it was a vehicle without a real roof would render any sort of armour pointless, don’t you think? It was put together so quickly when the us jumped into the war, I doubt any sort of “armoured prototypes” were even attempted. And they had so many of them in the European theatre, they wouldn’t waste the effort to bring them back after war’s end. I’ve seen footage of trucks being dumped into the ocean off of aircraft carriers, like helicopters after Vietnam.
As for the corvair, the spyder designation only referred to the convertible version, nothing to do with the engine.
ouça
e
@@MrJett1971 thanks for the insight. I am not a war buff, did they have land mines in WWII? Could it have been for the under the carriage? Were grenade attacks of occupants common? I have tried to make sense of what I remember. I took the father's explanation as fact. But later thought "why so thick?" Like I said I wanted to get into the Vette and only investigated the bullet hole itself.
Too long didn’t read
All questions you could easily look up online. Do your own research.
I thank RUclips, for enabling me see very car in the world and it's reviews. Richard, Uganda,EastAfrica.
Thank you for watching, Richard!
My grandfather owns one and were restoring it because he left it to rust cause he never need to use it but now he wants to restore it so I can’t wait till it’s done
That's exciting! Thanks for watching!
My grandfather drove this in Normandy when he was in the G2 section (Army Intelligence). He said it was one of the unsung heroes of the war! It was rough, tough, easy to fix and could drive over anything! My grandpa watched this and said "Tell them to use their toe to start the car and use their heel to throttle in the gas, that's how we did it and it worked".
Wow, that's amazing! We have our freedom thanks to your grandfather and his fellow soldiers and I feel honored that you showed him our video. Next time I drive a Willy's, I will try to start it like that!
Dr. Spectre
Sounds like Grandpa knew exactly what he was talking about.
Yup this is a post was Jeep Cj jeep ..No Axe and shovel pressings on the drivers side ..Slots in the bottom of the body near the foot steps.
corrugated rear wheel arch tops. The shape to the cutout above the steering column plus many other features as mentioned by others ..
Never thought we would learn so many more details after publishing this video.
1:16 that little slide made the park perfect!
iconic look people still loving this vehicle from over 100 yrss
Really awesome. I have learned some new things about the Willis I never knew about. The reverse is in the position of the first gear and the first gear in the position of the second gear.
Daniel Magdziarz if this guy taught you something... Well .... good fer you... really. We’re doomed
@@donaldleavy4379 , I was not looking for a detailed engineering analysis. I just wanted to see the car, hear the car, and get some basic information. It was fun. I think it would help you if you would stop browsing through few minutes videos hoping to learn how to build a car. I found exactly what I was looking for, you didn't.
My grandfather told stories of how his Jeep saved his life 4 times during the war. Scouting vehicle, fire support, ammunition carrier and finally as a medevac unit, the Jeep carried Granddaddy and his Ma Deuce into battle and brought the pieces back afterwards.
man id really like to hear those stories
ill never forget when i found out what a willys could do. skinny enough to drive up forested hills, what a mountain goat!!
I have a 1945 willys jeep. It gets so much attention on the streets
I bet it does! Thanks for watching!
Go to the Philippines. You will see plenty of customized Jeeps as public transportation. They call them Jeepnys. The U.S left so many behind after WW2. They made use of them. It's kind of a symbolic with this Jeeps in that country.
The way you shifted that transmission tells a lot on how hard you are on it.
It didn't work in any other way because it was already broken.
Just seen one of these driving through kendal in the uk, wow it was so cool
After the army retired them from the war scenarios. They were used in 88m training to cross small and shallow creeks don't know nowadays. Many of them were cut in parts and dropped into the sea to create artificial corals.
My grandpa has one of these it's loud and fun
Sounds like the one we drove!
They're amazing vehicles
I'm from where the Jeep originated
Love the video been looking or a long time for a good Willys jeep
Real Jeeps honor the Willys MB configuration. 2 doors or none is better, round headlights and a soft top - down is always better. The rest is misc garbage not worthy of the wave. Love this Jeep. 🇺🇸 What is that thing on the left?? Give that back to your grandma, she's going to miss her bingo games.
Gladly Jeep is still producing the Wrangler as a purist's off-roader to honor the Willy's legacy.
Very ahead of it's time, it had a foot start like every other car of the time. Amazing
Wow, that joke went right over your head.
@@LCR given all the other falsehoods it's hard to tell what are the jokes
It's easy to tell when you look in the mirror.
When I was a kid, we had one and I've always wondered what the engine's displacement was!😎
Nagyon tetszik még a WW 2 es Schimmwagen is. Ezen jármüvek bemutatásáért köszönet!!!
They sure don’t make cars like this anymore
It's a shame really these cars may be old but they sure are fun/good
The Kübelwagen is my favorite car to drive, but man I hope I get the chance one day to drive a Willys.
My favorite 1942 Jeep Willys 🇱🇷🇧🇷🚙
Tonhão garage Ramos my dad had a few of original Jeeps in those early days and I still remember my dad always mention of this exact Jeep as Willys Jeep in the early sixties... interestingly
and my dad had had one with two countries motor licence plates one registered in Brunei and another in our hometown MIRI in BORNEO Island
This not a 1942 jeep...
This is fucking poor copy....
0:32 _hornpub intro starts_
For the purist, its 56 BHP, not 60, the only electric wipers they had in the war was on Canadian jeeps, and that was drivers side only, nice jeep but it has been Bastardised.
My dream car
When you grabbed the antenna to help jump out of the back of the jeep was hilarious. Lol
😂
Back then it was already an option to switch between 2 or 4wd..... amazing.
sweet old jeep, i love them
I am really fascinated with ww2 and the vietnam war. I love the look of this weapons
imagine how fun bush bashing would be in this thing
It’s fun! SUB
@@LetsBuildaWillysJeep Do they still sell these and how expensive are they, please?
3:56 I also See a nice 2 door jeep cherokee xj in the background there to the top right
Well-spotted!
*Interesting, Thanks for informative vid!!!*
Thanks for watching!
Smells like freedom
I have my grandfathers 1942 jeep from WWII
That's amazing! It sure adds an extra sentiment to that Jeep!
Luxury Car Report thank you!!
The army began to retired the Willy after Vietnam war because they flipped over during the 2nd world war they used them in Vietnam bases , cities and airfield camps because it was flat terrain. In Europe the geographical scenario was a challenge. The jeep can't go faster than 40mph and take a close curve without flipping over. Many accidents and deaths.
The us used the m151 very different to a Willys mb but the same concept
One lovely and patriotic machine
Well said!
OLD IS GOLD
I was of the believe Willys MB Jeeps had steel spoked steering wheel, and the Ford had the covered steering wheel as you have. Regards Frank
My 42 MB had the slat grill. This one has a stamped grill. What gives?
Old is Gold
YEEES
I need one. It is the most attractive vehicle ever produced the shape is perfect. Do you think I could get it mounted with a .30 cal? :D
What you have is a CJ2A tub with an MB grille....frame, engine and transmission are off a CJ2A....😁
I didn't notice at first, but you're right!
Correct ! Pathetic that they tried to pass this off as an MB !
I can still see a Willys running along Aguinaldo Highway in Cavite driven by an old man with a cowboy hat. The tools are still intact on the side of the jeep that includes shovel, ax and grub hoe and at the back is a water container with markings.
Classic car🔥
Currently restoring my 1947 CJ2A Willys Jeep. Follow my channel as I work on restoring my Willys.
What a beaut, would love to have one. How much are they going for in good condition?
Around $30k for a good one.
@@LCR damn, I don’t need it.
But I sure want it
That Willys Jeep is the ancestor of Philippine Jeepneys
Nice old jeep but better get that left front wheel bearing checked. Too bad the currently produced offerings are such junk (check just about any worst car list).
The all SUV uncrowned King Jeep.
40th beautiful, smart, durable,
Very good 👌 look, very good technology, very good 👌 mashien.
I like jeep.
How can you tell it's a civilian jeep? It looks military, the civilian one has a skinnier front, the military had a wider front
The background music 💯❤❤❤😍
Glad you like it! Thank you for watching!
I like that one more than the Jeep nowadays
Preach to the choir brother
hoihoi,
zijn er specifieke problemen met de willys jeeps en de latere nekaf m38 jeeps?
Lovely Jeep
It sure is!
i love it
I see why Wranglers are so expensive, no matter what year they are the resale price never drops.
Yeah, which sucks for anyone who wants to own one on a budget.
thats how real jeep is , if they made it again with larger space it would boom 😀
fantastic
Thats not a MB ... Its missing glove compartment , shovel and ax on the side , rear axle is designed after WW2 ...but it is still a very nice jeep ..
your right, looks to be a post-war CJ in Army paint
thats seems like french hotchkiss
@@josephus3603 A French Hotckiss is a mb made under license off Willys with little differences...
at 1:22 I only see two Jeeps, the other is a FIAT.
You know one of them was made by Mercedes right? 🤣😂
what you say is in theese video is not true !!
it is not an original MB JEEP, its a CIVILIAN CJ2A JEEP with some military MB parts : front grille , and windshield , no more !! its a very bad copy !!
How do you tell the differences? I am very curious since I am more of an expert on Kübelwagens and telling the differences between originals and beetle reproductions.
@@MistahFox Look at the body next to the driver, there is a drain opening, it does not have the military version, nor is the shovel and ax housing stamped on the body on the driver's side, there are many more differences.
the first engine I ever rebuilt was with my Grandfather... an old Willys
2:22 The front left wheel of willys is not straight.
Because they’re turnimg
Willy's MB was go good, everyone thinks that jeeps are good off-road vehicles because of the MB's reputation.
The Wranglers definitely are, especially the 2-door.
@@LCR Nahh
Az elözö megjegyzéshez: Az orosz BTR 40, és a BTR 152 is szenzációs forma gyüjtöknek!
That Jeep needs some work done on it..drivers front wheel bearing is probably on it's way out and that foot starter switch is just all wrong. It also needs a service on the caburetor too. If looked after these cars are literally bullet proof.
bulletproof you say? Tell that to the germans
Any issues with electronics or oil pressure. Both issues on mine. Rebuild, needed, new wiring harness too, also need to convert away from the 6volt system. Not handy
Yes, same with this one. The electrical system had been converted, but not in a proper way. One of the two batteries was draining very rapidly. We didn't have the vehicle long enough to figure out what was going on unfortunately.
This guy is awesome because he look very tall
Thanks! It's a great measure--if the presenter of LCR fits in a car, almost everyone else does.
nice
That is not an "original 1942 Willys MB"
When you start it you don’t use your hand you use your toe to push the button and your heel to give it gas.
Hi Brett, thank you for your comment. We heard this from more viewers; it would have been an easier way to start the car!
Man...your jeep is excellent but your front left tyre is shaking. Repair it immediately. No offense gentleman..
Thank you Sandeep! No offense taken at all! You are definitely right about the wheel. I do not own the vehicle though, it was for sale at the sponsoring dealership at the time.
I think that isnt war jeep, it looks like french hotchkiss, different starting button, missing box under production gambles, two accumulator seats and french antenna.
The Jeep belonged to the Belgian army and had been in service for a long time.
THEY SEE ME ON THE STREET THEY SAY WILLY WILLY
How many engines and transmissions changed on that jeep?
i lovejeeps and also that is my dream car i want to drive a old willys jeep
New comment. Why does the exhaust come out of the rear when the muffler is on the side of the vehicle?
The pipe from the engine is wrong. Goes out under drivers seat .The first vipers was hand driven .
New jeeps SUCK! Old ones are the way to go.
Renegade does, the Wrangler is ok imo
Yep. I don't care for anything past the CJ's
Not even Wrangler?
@@LCR LOL Especially Barbie's wrangler.
I can smell the exhaust
Why do you keep starting the engine with the transmission in gear making it lunge forward?
A rod was broken due to which it couldn't be started in the normal way anymore.
It also could hold 7 troops. The front bumper was also a seat
I've started to notice they use British fire extinguishers on these and noticed the Rifle mounts on upside down, and didn't the have leather grommets on rhe bottom of the shifters?
God that thing puts every other Jeep to shame
Hoj ik ga ok zo ene kopen als ik meijn reide weijs ge halt hep dankaik ok vor zo ene keij ken tege dat ik meij n reij beweis ge halt hep
Just went from 9 slats to 7 on modern grills
Miss the axe and shovel on the drivers site.
And exhaust is on the passenger site.
+Lex Koster Yep, unfortunately it didn't have those.
Than its not original , because can`t see the clips for it
+Lex Koster After its service for the US Army, this Jeep has been adopted for and used by the Belgian army until sometime in the 80's. That might be why some original details have been altered or removed.
What you have demonstrated is a post-war CJ2A - Civilian Jeep, made up to look like a WWII army jeep. It was manufactured AFTER WWII, and was never a US army jeep..........!
Rear Axel looks different than original, bumperets are upside down, and the pioneer tool side for the driver area are not there.
You're driver tire is warped. The steering box pivot is on the Radiator support. The wwii jeeps has the steering pivot on the Axel.
Sorry, but this is a converted CJ2A.
That front left is giving me anxiety
Where do you get parts to rebuild an engine? Rings, piston and head. And a 6v conversion?
I work for a company called MV Spares in Australia. We manufacture those parts and ship globally. You can find us online.
I want that old jeep.
with wider wheels for offroad.
It might surprise you that more narrow wheels actually provide more grip in the mud. Although wide wheels would look really cool!
Batam invented the jeep but didn’t the contract to build them they still built a small amount of them for ww2
Yes; unfortunately they didn't have the production capacity needed to supply enough jeeps. In the end no one did though so three manufacturers ended up making them.
Hey euro,,,it is also designed to run on pure gas ,,,,not today's blends
Intéressant
cool
A Willys Jeep, a Ford GPA Amphibiant, DUKW-t ujra kellene gyártani eredeti formában a legkoorszerübb technikai eszközök felhasználásával
Saludos desde Venezuela , m gustaría tener un Jeep MB
Hello, greetings from the USA! Thank you for watching :)