Columbia 8 Inch Fat Boy Drywall Flat Box using No Pock

Поделиться
HTML-код
  • Опубликовано: 29 окт 2024

Комментарии • 120

  • @Maxkil
    @Maxkil  5 лет назад

    Subscribe goo.gl/dDcLgJ & Watch this new video to learn how to run in paper tape with the Northstar Taper - ruclips.net/video/CbltKA3XB34/видео.html

    • @TheBigLeeg
      @TheBigLeeg 5 лет назад

      I’ve been doing this 26 years. We always just use dawn dish soap to remove pocks. Squirt One complete circle around the outer edge of the bucket and one circle about half way between the center and the outside perimeter of the bucket. Our buckets contain 4.5 gallons. We’re in the United States. Also notice your mud had a yellow tint. What’s up with that? We tint our mud for touch up and light check. But otherwise we can tell the difference between 1st coat and second coat because we use a 10” on 1st coat and 12” on 2nd. R

    • @holleratyaboy8810
      @holleratyaboy8810 4 года назад

      Same here we tried no pock and it works the same as dish soap and dish soap is cheaper

  • @elsalvadorelivideos5566
    @elsalvadorelivideos5566 5 лет назад +1

    Very good job THIS is the way we doing this tipe of work in Maryland USA but very fast

    • @stevehannah8162
      @stevehannah8162 4 года назад +1

      Yeah we get paid more in Australia we don’t wear jeans at work or have to work like dogs

    • @elsalvadorelivideos5566
      @elsalvadorelivideos5566 4 года назад

      @@stevehannah8162 yeah right compare what you do on United States is nothing what your guys do on Australia

    • @Maxkil
      @Maxkil  4 года назад

      That's true.

  • @NickSCFC91
    @NickSCFC91 5 лет назад +1

    12 months cracks everywhere every new builds got them

    • @danielbarry6949
      @danielbarry6949 5 лет назад

      Can you elaborate on this a bit more, I've seen lots of cracks in new builds in corners, but not on any straight joints?

    • @ScottyB0AllDay
      @ScottyB0AllDay 4 года назад

      @@danielbarry6949 structure settling

  • @sodanor
    @sodanor 5 лет назад +5

    And this is called easy money. No butt joints. Almost no angles. Very few screws. A dream job

    • @Maxkil
      @Maxkil  5 лет назад

      Yeah true that. The fixing is very efficient as well.

  • @jarrodwardle1258
    @jarrodwardle1258 Год назад +2

    Always looks so nice and neat but I bet these boys will agree it's gotta be one of the messiest trade's the floor always look so clean before we come through dropping plaster everywhere 😂

  • @YESHUAisMESSIAH777
    @YESHUAisMESSIAH777 Год назад

    Trip seeing how you fill your box

  • @SotTreeService
    @SotTreeService Год назад

    Do you guys use easy sand in the banjo. And boxes. I was always told “never” use east sand 90 in the auto tools.

  • @robertgerber2533
    @robertgerber2533 4 года назад +2

    Why is there so few screws being used? Especially on the walls

    • @eminagayev4270
      @eminagayev4270 4 года назад

      Kjhkphgvkokjjiy
      Uooj0knbgxgjg
      Oijjooy
      J00jjhjubbbjbuppknb. Jjg
      Hkhhl

    • @stevehannah8162
      @stevehannah8162 4 года назад

      Glue bro lol

  • @audreyyoung5154
    @audreyyoung5154 4 года назад

    I just wonder how much do ya all change for drywall work just wonder because if I ever need drywall work done again I’m never going to do it again lol I just hate it

  • @javiersilvanocastillo5197
    @javiersilvanocastillo5197 7 месяцев назад

    Hola amigos saludos desde Argentina provincia de Mendoza de donde son amigos

  • @fjcmz85
    @fjcmz85 5 лет назад +1

    What country is this 20 years old

  • @PaulPeck
    @PaulPeck 5 лет назад

    Good stuff Max!🔥 I didn’t know you guys have USG products over there. That’s all I use. 😎

  • @danielbelanger9309
    @danielbelanger9309 3 года назад +2

    how many coats do you guys do?

  • @ofrimashiah2
    @ofrimashiah2 4 года назад

    Why do you put laundry soap in the mud? I heard once that it allows for longer working time? Or just easier to work with?

    • @Maxkil
      @Maxkil  4 года назад

      I think lime is used for it to last longer. The laundry soap is to stop pocking

    • @samroberts8365
      @samroberts8365 4 года назад

      Citric acid is for longer lasting
      Table salt for instant reaction hardening
      (Base coat and cornice adhesive powders only)

  • @ahmadchahrour4556
    @ahmadchahrour4556 5 лет назад

    what about 12 inch Drywall Flat Box for the finish ,final coat?

  • @nestormejia2692
    @nestormejia2692 5 лет назад +1

    Masters guys amazing..... I’m painting for 10 years my dream is be taping guy.... but professional

  • @chevycheeseburger3273
    @chevycheeseburger3273 5 лет назад +1

    Where did you get the long handle wapdam knife love your videos keep up the good work.

  • @hassannegm553
    @hassannegm553 4 года назад

    How many or much in euro thanks the machine thanks

  • @flogarbi6757
    @flogarbi6757 5 лет назад

    Hey Max. Very good vidéo. And very good guys.
    Can you use this pump to fill your box with quick mud ?

    • @Maxkil
      @Maxkil  5 лет назад

      Yeah but don't delay.

    • @tinavs
      @tinavs 3 года назад

      Hi,can you tell me please where can in buy this pump?? Or the name to look for it,thank you

  • @tommymcwilliam3975
    @tommymcwilliam3975 4 года назад

    What is the name of the stuff in the half cup of fluid you added to filler ?

  • @f.r.2536
    @f.r.2536 5 лет назад +3

    Not Bad , but its Not the qualitiy of german work . U know what is Q4 ? .
    Greets From Germany

    • @Maxkil
      @Maxkil  5 лет назад

      Guten Tag Florian, thanks for watching! I would love to see the German methods! No i havn't heard of Q4 before.

    • @Zozo806
      @Zozo806 4 года назад +2

      @@Maxkil actually there is no german method. There are nearly no german people anymore in the drywall buissnes. 9.5 from 10 are eastern europeans, poles, romanian, albanian, russian and so on and the Quality is depending on crew to crew very different and often pure shit.
      Q4 or Qualitätsstufe 4 for you quality level 4 is that you give the whole sheet surface at least 1 up to 3 mm mud coat after mudding and taping the butt joints and sand it with 220 grid or even less corse . This is only nessesery if you want to paint directly on the surface.
      I was a sheet rocker in germany for about 10 years and i still work in construction buissnes and see this guys regulary and i can tell you, your work is compared to that what is here standart on an very high quality standart.
      Especially the boxes are not seen very often here in europe. The majority don't use them and fill with trowel and knife and with tape hanging from a rope. No boxes, pumps or tape bazookas or even leg extensions. All still hand work and ladder crap walking.

    • @Maxkil
      @Maxkil  4 года назад

      @@Zozo806 thanks for the insight. Very interesting thanks again for watching

  • @sls745
    @sls745 5 лет назад

    bns tardes!!!! que es ese producto de botella que le echais a la masilla?slds

    • @Logan-dl2qf
      @Logan-dl2qf 5 лет назад

      Es para eliminar Los poros o borbugas pueden usar gavon Down y funciona mejor y barato

  • @jaythojj1365
    @jaythojj1365 5 лет назад +1

    Nice brother!!! So did the pock product work?

    • @drywallgangsters
      @drywallgangsters 5 лет назад +2

      Yes we can't use this specific all purpose without adding it in. Maybe if we try a different mixing paddle might help

    • @TheBigLeeg
      @TheBigLeeg 5 лет назад +6

      I’ve been doing Drywall and Paint 26 years. All I do is commercial work like hotels, assisted living , and multi family. As the General Superintendent of a large Drywall and finished company , I have to make sure all the different projects are hitting schedule and the quality control is constantly being observed. When I started the tapers use to use hawk and trowel or knife and pan. A few years into it the boxes begin to be the tools of choice for the tapers. The talent and technique changed. But the one constant was POCKS. POCKS can add up to a fuckload of Hours and kill the quality of the finish. I can’t m I WONT , turn a job over late and shitty looking. The one thing I HAVE ALWAYS BEEN ABLE TO DEPEND ON , NO MATTER THE TAPERS, IS DAWN LIQUID DISH SOAP FOR POCKS. NO MATTER THE MUD OR THE MAN. Squirt 1 circle around the perimeter of the bucket and one circle half way between the center and perimeter of the bucket and mix. No pocks ever in 26 years guys.

    • @stevehannah8162
      @stevehannah8162 4 года назад

      Leon Corriveau hahaha the man

  • @cambodaiaction793
    @cambodaiaction793 5 лет назад +1

    I want to buy it

  • @Chicago_Clout
    @Chicago_Clout 2 года назад

    Where do you get those shoes?

  • @robertr7887
    @robertr7887 5 лет назад +1

    Looks good 👍

  • @stickyricky345
    @stickyricky345 5 лет назад +15

    Did I just watch 7 minutes of mixing mud?

    • @Maxkil
      @Maxkil  5 лет назад

      Lol, I believe you did. Thanks for sitting through!

    • @thorr18BEM
      @thorr18BEM 5 лет назад

      It was glorious

    • @jaredr6577
      @jaredr6577 5 лет назад +1

      fuck yeah :D

    • @Oduncukiz
      @Oduncukiz 5 лет назад

      It was so fun.

  • @juniorcarvalho3977
    @juniorcarvalho3977 5 лет назад +1

    Onde eu compro essas ferramentas?

  • @traveltrailertipster259
    @traveltrailertipster259 3 года назад

    I've been finishing drywall for 25 years and tried the no pock and couldn't see that it did anything. waste of time and money. IMHO Used boxes and angle heads for 15 years od so and didn't see it help there either. Use it if you like, I like to put the money in my pocket.

  • @bla-bla-bdish
    @bla-bla-bdish 5 лет назад

    Что добавляет в бутылках?

  • @gilehernandez4348
    @gilehernandez4348 5 лет назад +2

    Hey max where can I get that pump, the box you use is a 10? I need to find something practical

    • @Maxkil
      @Maxkil  5 лет назад

      Box is an 8 and a 12. The pump not too sure my friend

    • @keemonthebeat1854
      @keemonthebeat1854 5 лет назад +1

      @@Maxkil Ay mate, your 1st coat was with a 8" fat boy box? then finished 2nd pass with a 12? Do you prefer 8 - 12 or 10- 12?
      Thanks.

  • @juniorcarvalho3977
    @juniorcarvalho3977 5 лет назад

    Olá, acompanho seus vídeos e gosto muito

  • @Полинкамалиныка
    @Полинкамалиныка 5 лет назад

    Что за паста в вёдрах и что он добавляет в крышечке?

    • @anonimmoya3425
      @anonimmoya3425 5 лет назад

      Присоединяюсь к вопросу! Особенно интересует что добовляет из бутыли!!!

    • @maksymlazebnyu4540
      @maksymlazebnyu4540 5 лет назад +1

      Руслан 55а В ведрах это шпаклёвка . При шпаклевки боксами нужно замешивать жидкую шпаклёвку но при высыхание иногда усаживается и иногда пузыриться.поэтому они добавляют эту жидкость она предотвращает осадку и пузырьки в шпаклевке. 7 лет в Канаде сам только увидел эту бутылку ( может новый бренд)

    • @anonimmoya3425
      @anonimmoya3425 5 лет назад

      @@maksymlazebnyu4540 Спасибо тебе добрый молодец !!!

  • @LosPasseios
    @LosPasseios 4 года назад

    some store website to buy these alls tools

    • @Maxkil
      @Maxkil  4 года назад +1

      Hi Edgar, try proplaster.com.au

  • @jonathangiraldo2148
    @jonathangiraldo2148 5 лет назад +1

    Where can I buy that filler tube?

    • @drywallgangsters
      @drywallgangsters 5 лет назад +1

      It's wallboard branded mate. This was the first time we used it

    • @keemonthebeat1854
      @keemonthebeat1854 5 лет назад +1

      you can also make your own attachment.. I used the top of a 2L bottle of pop and molded it to fit over the end of my compound tube.. I flattend the cut end so it was narrow enough to fill my box and heated the cap end just enough so it pops over the end ball. works pretty bomb

  • @christopherr7195
    @christopherr7195 5 лет назад

    there's no butt joints.. all log whole sheets... like the idea... takes some planning , but like the idea. Can I ask, what the gap at the ceiling is, sorry if youve answered this before.. but thank you.

    • @TheBigLeeg
      @TheBigLeeg 5 лет назад

      c Only I’m guessing that gap is for deflection and the builder is going to use some sort of a clever slip trim.

    • @xestupido295
      @xestupido295 5 лет назад +1

      c Only the gap isn’t really there for a reason per say but there is no point getting the gyprock sheets flush with the ceiling if 90mm of both the wall and ceiling are going to be covered the whole way round with cornice.

    • @christopherr7195
      @christopherr7195 5 лет назад

      Aiden01 gotcha. Thanks for answering

    • @danielyi4071
      @danielyi4071 4 года назад

      Cornice

  • @highroller8877
    @highroller8877 5 лет назад

    Is there a reason for the coloured mud?

    • @jonathangiraldo2148
      @jonathangiraldo2148 5 лет назад +1

      Michael O'Reilly easier to spot imperfections

    • @drywallgangsters
      @drywallgangsters 5 лет назад +2

      Just how it comes in the bucket not sure the reason why but like above said it's easier to distinguish between base (first coat) and final coat

    • @TheBigLeeg
      @TheBigLeeg 5 лет назад

      In the states we will color our mud when doing light check or touch ups just do you don’t miss it when sanding the touch up.

  • @armandoalemn3844
    @armandoalemn3844 5 лет назад

    Adonde benden esa cosa para echar masa

  • @chodge8366
    @chodge8366 4 года назад

    no outlets or switches, minimum screws

  • @ferdeleon6941
    @ferdeleon6941 5 лет назад

    You don’t run the long joints on 0 got to be 2 or 3

    • @ProbeGT2
      @ProbeGT2 5 лет назад

      I tought the same thing but they wipe the flats after so excess compound is removed.

  • @СайыдАйхынбаев
    @СайыдАйхынбаев 5 лет назад

    да

  • @jesselebarron9804
    @jesselebarron9804 5 лет назад +1

    do you guys use the same mud for all steps?

    • @drywallgangsters
      @drywallgangsters 5 лет назад +2

      We use sheetrock easy sand base for first coat everything and second coat buttjoints. Then sheetrock total lite all purpose for the rest of the coats.

  • @edgarcarloschumaceroboluar6530
    @edgarcarloschumaceroboluar6530 5 лет назад

    Qie le echan y paraque gracias

    • @carminecapole3781
      @carminecapole3781 5 лет назад

      Espara ke no aga poros y corra mejor la caja se vuelva mas suave y espongosa ala ves

    • @pedrozarate7078
      @pedrozarate7078 5 лет назад

      El jabón líquido ase la misma funsion y es mucho más económico primo.

  • @michaelrogers404
    @michaelrogers404 5 лет назад

    Never seen yellow mud

    • @xestupido295
      @xestupido295 5 лет назад +1

      Michael Rogers it’s just a tinted top coat nothing really special about it

  • @opiedoe1
    @opiedoe1 4 года назад +3

    For the love of god there’s no need to trace joints learn to use your box settings

    • @carlosescamilla2779
      @carlosescamilla2779 4 года назад

      Yup they only doing double the work 😂

    • @danielyi4071
      @danielyi4071 4 года назад +5

      Job comes out neater and smoother when you trace ,less imperfections,and easier to sand,takes an extra 5 t0 10min to trace behind the box well worth it for a high end finish.nice work boys

  • @SantiagoRamirez-tf3zz
    @SantiagoRamirez-tf3zz 5 лет назад +1

    Why doesn’t your drywall go all the way up to the ceiling

    • @dfracnco
      @dfracnco 5 лет назад +2

      Im guessing crown molding..

    • @Chicago_Clout
      @Chicago_Clout 2 года назад +1

      So the smoke can escape.

    • @ricosrealm
      @ricosrealm Год назад +1

      cornice is common in aus

  • @СайыдАйхынбаев
    @СайыдАйхынбаев 5 лет назад

    Гатовыи Паста

  • @tedhays2845
    @tedhays2845 4 года назад

    My advice would be to throw away that mixed blade. There is one far superior to that. Your mixing mud not paint..
    All wall .com

  • @ferdeleon6941
    @ferdeleon6941 5 лет назад

    D

  • @waldiludwikowski697
    @waldiludwikowski697 5 лет назад

    Nicely shaved legs dude!

    • @betitosales951
      @betitosales951 5 лет назад

      Waldi Ludwikowski excelente video,chicos.

  • @bugaristuckateure5407
    @bugaristuckateure5407 5 лет назад

    Keine versetzte fugen???

  • @gazmgow622
    @gazmgow622 5 лет назад

    Not a dig at you guys but this tapered joint boarding is shit. Home owners will be forever patching holes in the walls

  • @mafia_is_immortal
    @mafia_is_immortal 5 лет назад

    Буржуи

  • @rudygibson3527
    @rudygibson3527 5 лет назад

    What is the brand of the Filler tube ?? It seems easier thanks a pump ...?

    • @drywallgangsters
      @drywallgangsters 5 лет назад

      Wallboard. First time using it in the video it was good but the pump filters the mud so you don't get much rubbish when you run the box so we only use it for 2nd coat not final coat.

    • @rudygibson3527
      @rudygibson3527 5 лет назад

      @@drywallgangsters thank you for this tip! i use a tapetech tube with the adapter filler, but i find it hard to pump the mud.Maybe,this is it because of the greater length of this tube. ..

    • @drywallgangsters
      @drywallgangsters 5 лет назад

      @@rudygibson3527 hey mate we've got a can am tube as well but the end has a small hole for adaptors which is alot harder to suck in then the wallboard one which is just for filling boxes and has a way bigger opening!