Making a whirligig part 3 Bases & Sails
HTML-код
- Опубликовано: 8 окт 2017
- Making whirligigs is a very enjoyable activity, in this series of videos I will go through all the stages of making a whirligig. in this video I cover the bases and sails.
Хобби
You are an expert in whirligigs.
A book with instructions and templates would be a great idea I think. 👍
When the weather gets better, I'll start in the workshop with whirligigs, it's fun and there are almost no limits to what you can do.
Thanks for the video.
Thank you for your kind comment Steen but I am no expert. My stuff is very basic and simple compared to others.
Amazing John ! Seeing this in flesh today was fantastic! Thanks for receiving me 👍👍
Thank you so much for your kind comment Mikey. It was very good to meet you today.
In the flesh?
Hi I'm Chuck Fisher from NC usa just wanted to tell you I used your design for a propeller to repair an old whirlygig. It worked like charm, thank you.
That is really nice to hear. many thanks for letting me know.
Great videos , you should have books out for sale, your work is brilliant, much organized and very much appreciated. Thank you.
You are very kind. thank you for taking the time to watch and for your kind comment.
Brilliant Video, thank you so much for sharing, I could watch this kind of thing all day. I'm going to have a go at a woodpecker whirligig during the next couple of days!
You are too kind, I hope to do more whirligig videos soon. hope your woodpecker one works for you.
I have subscribed to you channel by the way so keep your quality vids coming!!
Very good job and tutorials in 3 video: Sir you are a magician!
Many thanks for your very kind comment.
Nice job on the platform and wood work.
Thanks for your kind comment.
Very enjoyable and instructional! Thanks for doing this.
Many thanks for your kind comments. I often wonder as I do a video if anyone is interested and your comment makes it well worth my time in filming.
@@scrimperuk been maxing out on your channel! Lots of great stuff as I'm setting up my workshop. Have a scrollsaw but haven't taken it out of it's box yet, also looking to build a router table. Would love a video workshop tour if you have the time!
I have often considered doing a video tour of my workshop but am a bit concerned that it might appear as if I am 'bragging' although I have to say I am always interested in viewing other workshops. it's finding the time to do filming at the moment as I am busy overhauling my cycles, doing up an old hand cart plus 101 other jobs around the house.
I have to be in the mood to get the camera out and at the moment I am not motivated although I do have lot's of ideas plus I have to finish my Whirligig videos. :)
@@scrimperuk Whirligig videos are much appreciated. The plan for my workshop is to make automata, so whirligigs are a great intro while I develop my skills.
Ótima aula. Parabéns por compartilhar.
Obrigado pelo seu amável comentário
What would diy'ers do without Meccano. Over the years I've used bits from my old metal Meccano on various diy jobs. As a new viewer I'm enjoying your videos.
Thank you for your kind comment Alan. Most people of my generation played with Meccano and I think we are the better for it what else teaches engineering whilst at the same time enjoyable play. A lot of today's young ones would better understand mechanical things if they used Meccano rather than have their eyes glued to smart phones.
Can you tell me what size rods do you use
Basically anything that is available, have a look at my video entitled source of rods for whirligigs.
Good job!
Thank you.
I find those Square plastic Gutters are good for Propellors John i cut them out on the Bandsaw made one 3 yuears ago and the props are still as fitted
That's a good tip Ronnie.
Very Nice, Thanks 👍
Many thanks for watching.
thanks
Thanks for the comment Roger. :)
Very good
Thank you.
Where do you go to get plans for these ?
Cheeers👍🇺🇸
Hello again ...Where did you get the collars from that you used on the shaft ?
I often use the collars taken from scrap Meccano wheels or use old terminals from electrical items. I talk about it in one of my videos.
I like that these have playfull and relax look, like from some kids story book. You should build a somekind of story with these. :)
Many thanks for the comment.
Aye up John those Star washers are good for holding the shafts , the Woodpecker etc dont know if youve tried them or not ?
Hi Ronnie, thanks for your comment, I have tried them but prefer the Meccano Collars.
Really think this is just Super! What is the average length of most of these. ? Thanks much.
You can make them any size or length you want, in this case I think it's about 18" fan to tail. most of mine I start on a base about 24" long usually the timber is 2 1/2" x 1" x 24".
The one in this video is different in that it's a short broader base.
In my opinion the bigger they are the more effective they look, when I finish I always wish I had made them a bit bigger!
Do you ever have a problem with them not wanting to stay nicely to the wind but, can not seem to find just the right spot to point to so wobbles back and forth when you want it to be steady ?
Have not noticed any problems. to be honest I just stick them on a pole and let them go.
What do you use for the drive shaft ?
In the case of this particular whirligig I think I used a piece of Meccano rod. have a look at my video here ruclips.net/video/qoc7SmqqBSA/видео.html where I cover drive shafts.
Is M.D.F worth using for the figures ????
i would definitely avoid MDF , there is no grain to give strength to the figures and no matter how much paint or varnish you apply they will not last. I would suggest that MDF would be about the worst material you could use to be honest. One can always find the odd piece of scrap wood to make figures for example the wooden arms of an old armchair are often beech wood or the odd bit of oak. Some of my whirligig parts are cut from the hedge. :)
👋😷🇺🇸👍
your videos are brilliant and easy to follow, plus your accent is great. where are you from please.
Hepp
Is it possible to share the block of man. I think difficult part is the block
Thank you for your comment, I have covered making the figures in a later video.
Is your base plate 3 x 1 or 2 x 1 please
Most of them are around 1inch (25mm) x 2.5 - 3inches (63mm - 76mm) but they can be any size really. :)
@@scrimperuk Thanks for that . My question now is how do you fix the whirly thingy to the pole that goes in the ground I couldn't find your link
Hi Beryl. I had planned to do more videos on Whirligigs including fitting to a pole and making the figures etc but have not got around to doing them at the moment. As soon as I am motivated I will do them.
@@scrimperuk I wait in great expectation thank you . Oh by the way where in the U.K do you live I can't place you ?
@@scrimperuk Try a cuppa that should help
Do you have a pattern for a blacksmith whirligig?
I think I got the idea from a book, you don't have to be precise, just draw a rough outline and cut it out. Once it's outside spinning around on a post it will look good however basic the figures are.
@@scrimperuk thanks for replying. I’m not much on drawing and this is my first time trying, but I’m gonna see what happens
@@romahibbs5921 I think I have a rough drawing of the parts, i.e. the man, his arms, the anvil and the horse that I could send you if you wish. It's only an outline but easy to copy or enlarge.
@@scrimperuk Really, no kidding? I would love them. Do you want me to pay you for them. Just let me know. I sure do appreciate this. Thanks again
@@romahibbs5921 No of course I don't want paying I am happy to help, I can email them to you If you can let me have an email address. If you don't want to put your address on here you could perhaps create a temp one to use? There does not seem to be any way to make contact via RUclips.