Great product line! I'm a retired Marine who took up gardening as a hobby. Until now, I've been building my indoor/outdoor garden structures using PVC. Effective but costly and difficult to modify once built. Your connectors along with EMT pipe will make things so much easier going forward. Already imagineering ways to mount/display my firearms collection. Thank you and Semper Fi
Great video Jake and you spoke slow enough that I could understand you due to the fact that I wear Hearing Aids. I just found out about Maker Pipe and I have several projects that these would be excellent for. Thanks for the excellent video!! 😀
Great information, thanks. I completely agree about the music and the sound effects. Good content doesn't need 'sprinkles'. Jake has a soft voice and the music was distracting enough that it took considerable effort to hear him. I was almost done watching before I thought to take out the left earbud so I could hear him clearly. Please consider dropping the audio effects.
For a table corner, that supports the table top, I'd use the 'cubic' 90 degree but for the mid-leg supports, I'd probably go with the T- connectors and offset the supports by a few inches. I don't yet know if that would be cheaper or ascetically pleasing, but if you pull the project down to build something else, you might have more versatility for later.
im trying to build a mini shopping cart. Is conduit and hinge joint strong enough to be weight bearing like a cart full of groceries Do they have hinge joint that lock bent or straight? how strong is it compared to soldering.
While Watching your video, it sounded like these connectors could be bought at any hardware store but as the video goes further, it's sounds like I need to find a specialty store? Can you clarify? I'm building a frame for a greenhouse. The greenhouse will not be a hoop greenhouse
Hi there, thanks for the question. All of the Connectors mentioned in this video are manufactured and shipped from our shop in South Carolina. Here's a link to our website for more information. Also feel free to give us a call at 843-245-9747 makerpipe.com/
Given the 4 way connector allows on pipe to run through, couldn't you turn it sideways and use it the same way as a 5 way as shown in the square game pic?
I'm building a cargo trailer camper with a rear door ramp. I'm putting my kitchen in the rear and using the ramp door as a patio as I do my cooking. I need some type of awning to cover the patio with the ability to enclose the area with bug netting or solid panels during cold weather. If I send you photos of where this is going could you make suggestions of how I should build the awning and what parts I would need? Or refer me to a customer that has built something like this.
Hey Jake, this is an awesome video for people new to Maker Pipe products. Would you guys be able to increase the volume of the vocals while editing the video? I wear headphones on my PC, and I have to crank Windows volume to 75%-100% just to hear what you're saying on youtube. (RUclips volume is maxed out as well.) For comparison, videos from Linus Tech Tips and Gamers Nexus are loud for my headphones at 50% Windows volume. Btw, I love the Gamers Nexus shirt.
Thanks for the comment Ryan! I usually aim to get the volume between -12 and -10db based on research I did when I first started editing videos. Since there’s no exact standard that people follow it’s difficult to know exactly where to get it. Also I have a bad habit of speaking softly when I’m trailing off or not sure what to say next. That causes the level to fluctuate all over and make it really hard to edit. That will get better with more practice and videos. I’ll also do some more research and see what I can find as far as a general standard that people follow. Thanks again!
Hi there, yes we have a plastic end cap that pushes into the conduit end. makerpipe.com/collections/modular-pipe-fittings/products/conduit-end-cap-plug
Hi there, thanks for the question. We call that the 90 Degree Connector. Here is a link makerpipe.com/collections/modular-pipe-fittings/products/90-degree-connector
Thank you for this, but you really don’t need any of the background music or silly sound effects (like the audio “pops” used with your arrows); they are just distractions and takes away from your otherwise fine content. Your audio levels are also great.
Are you talking about the 90-Degree Connector in the thumbnail? If so that's because it's missing a pipe. There's supposed to be one in that open section.
Great product line! I'm a retired Marine who took up gardening as a hobby. Until now, I've been building my indoor/outdoor garden structures using PVC. Effective but costly and difficult to modify once built. Your connectors along with EMT pipe will make things so much easier going forward. Already imagineering ways to mount/display my firearms collection. Thank you and Semper Fi
Great video Jake and you spoke slow enough that I could understand you due to the fact that I wear Hearing Aids. I just found out about Maker Pipe and I have several projects that these would be excellent for. Thanks for the excellent video!! 😀
Thanks for your comment Dave! Let us know if you have any questions as you work through your ideas!
Great information, thanks. I completely agree about the music and the sound effects. Good content doesn't need 'sprinkles'. Jake has a soft voice and the music was distracting enough that it took considerable effort to hear him. I was almost done watching before I thought to take out the left earbud so I could hear him clearly. Please consider dropping the audio effects.
Thanks for the feedback Diane!
Great overview 👍
Thanks for watching Patrick!
Just found your product. This looks amazing!
The only limitations I can see would be someone's imagination turned off at the moment/
Thank you very much for your great products.
Thanks for the comment and kind words!
For a table corner, that supports the table top, I'd use the 'cubic' 90 degree but for the mid-leg supports, I'd probably go with the T- connectors and offset the supports by a few inches. I don't yet know if that would be cheaper or ascetically pleasing, but if you pull the project down to build something else, you might have more versatility for later.
im trying to build a mini shopping cart. Is conduit and hinge joint strong enough to be weight bearing like a cart full of groceries Do they have hinge joint that lock bent or straight? how strong is it compared to soldering.
Great product and cheaper than Kee brand… Id like to use these to reinforce my Harbor Fr8 car canopy’s or my H-bar on my fishing kayak
That sounds like a great application! Let us know if you have any questions. Thanks for the comment!
While Watching your video, it sounded like these connectors could be bought at any hardware store but as the video goes further, it's sounds like I need to find a specialty store? Can you clarify? I'm building a frame for a greenhouse. The greenhouse will not be a hoop greenhouse
Hi there, thanks for the question. All of the Connectors mentioned in this video are manufactured and shipped from our shop in South Carolina. Here's a link to our website for more information. Also feel free to give us a call at 843-245-9747 makerpipe.com/
Hello , these are great innovative products and ideas!
Im in CA , and I wanted to ask….
Are your connectors NEC approved?
Do you have any pictures to show how to make arbors using different connectors?
Given the 4 way connector allows on pipe to run through, couldn't you turn it sideways and use it the same way as a 5 way as shown in the square game pic?
Make a cheesboro for 1" EMT!
I'm building a cargo trailer camper with a rear door ramp. I'm putting my kitchen in the rear and using the ramp door as a patio as I do my cooking. I need some type of awning to cover the patio with the ability to enclose the area with bug netting or solid panels during cold weather. If I send you photos of where this is going could you make suggestions of how I should build the awning and what parts I would need? Or refer me to a customer that has built something like this.
Sure, I'd be happy to take a look and offer some ideas. My email is Jake@makerpipe.com
Hey Jake, this is an awesome video for people new to Maker Pipe products.
Would you guys be able to increase the volume of the vocals while editing the video? I wear headphones on my PC, and I have to crank Windows volume to 75%-100% just to hear what you're saying on youtube. (RUclips volume is maxed out as well.) For comparison, videos from Linus Tech Tips and Gamers Nexus are loud for my headphones at 50% Windows volume.
Btw, I love the Gamers Nexus shirt.
Thanks for the comment Ryan! I usually aim to get the volume between -12 and -10db based on research I did when I first started editing videos. Since there’s no exact standard that people follow it’s difficult to know exactly where to get it. Also I have a bad habit of speaking softly when I’m trailing off or not sure what to say next. That causes the level to fluctuate all over and make it really hard to edit. That will get better with more practice and videos. I’ll also do some more research and see what I can find as far as a general standard that people follow.
Thanks again!
Want!
I am making a 3-way 90 connections for a gardern frame. Is there a cap availble for the vertical pipe so that water wont get into the vertical pipe?
Hi there, yes we have a plastic end cap that pushes into the conduit end.
makerpipe.com/collections/modular-pipe-fittings/products/conduit-end-cap-plug
@@MakerPipe Thank you so much! That is exactly what I need.
What connector is it called for 3-way corner as shown at the beginning of the video (at 0:02)?
Hi there, thanks for the question. We call that the 90 Degree Connector. Here is a link makerpipe.com/collections/modular-pipe-fittings/products/90-degree-connector
Where is link to bend calculator for 7.5' diameter circle?
Hi Elaine, here is a link to the calculator. makerpipe.com/pages/how-to-make-circles-with-conduit-incremental-bending-calculator
Is this product compatible with Creform?
Thanks for the question. The diameters of Creform pipes and EMT Conduit are going to be different so they won't be compatible.
Whats a good email to send you photos on stuff?
Hi there, thanks for the question. You can send photos to Jake@makerpipe.com.
Thank you for this, but you really don’t need any of the background music or silly sound effects (like the audio “pops” used with your arrows); they are just distractions and takes away from your otherwise fine content. Your audio levels are also great.
Thanks for feedback!
Damn why is there that ugly gap in it??
Are you talking about the 90-Degree Connector in the thumbnail? If so that's because it's missing a pipe. There's supposed to be one in that open section.
@Maker Pipe yes but I am talking about the gap where the connector marries, not the open slot for the pipe.