Roof Framing 101 Volume 1.0
HTML-код
- Опубликовано: 6 июл 2024
- roofframing101.com/dvds/dvds-3/ This is a quick glimpse at the new video Roof Framing 101 Volume 1.0!
Roof framing is one of the most challenging tasks of framing. Many people have a problem calculating a simple roof rafter let alone full hip roofs by simply knowing what the pitch of roof is. By watching this video you will learn how to use a roof pitch construction calculator so you can calculate roof pitch and build a Full Hip Roof with ease.
Anton Council is a roof framing expert who teaches carpenters and contractors how to build a roof and calculate pitch of roof for any roof rafter whether it's for shed roofs, hip roofs, or gable roof.
roofframing101.com/dvds/dvds-3/ 
Хобби
Nice work, it takes skills to build a roof. I Contracted for 35 years so I understand the steps. I tell you though, you got to show safety on these videos. You can't have someone air nailing towards another worker at close range without even safety glasses on. Your selling all parts of you're work including safety. People will buy that that assurance just knowing nobody got hurt.
I am a retired Builder contractor I was a framing contractor for 30 years then became a builder contractor. I consider myself a master Carpenter a master root cutter I even used to piecework cutting roofs. I would generally get myself a 2-foot by 2-foot piece of plywood and transfer the outside wall line on the plywood exactly how the blueprint shows it. Man I would label every Ridge hip Valley By Numbers such as hip number 1 number Ridge number 1 Ridge number 2 and so forth. Then I would label every board accordingly I would label all the Jack Raptors 1234 and their location. Dacres would come behind me and put the roof together they would tell me after they set their Commons and Ridge and hip 99% of the time the ridge was level if you know what you're doing and you calculate everything out to the 16th of an inch everything will fit exactly the way it is supposed to. You have to beat. But people who know I can teach and then it's up to you to read and study and learn everything there is to know about cutting a roof because if you don't you'll be mediocre and you won't have your roof come together like they're supposed to there are a lot of tricks of the trade like setting back your valleys lowering your hips for the right Raptor Heights laying out your ridges so that stackers know exactly where to nail every board. I even cut all of my Gable studs my purlin strips and collar ties everything you need to put the roof together I would cut and label and stacked next to the house it was ready to go for any crew that knew what they were doing. Oh and by the way it is your duty to teach younger guys under you the same way you were taught so that they could carry on the trade.
Hello
Hi I read your post are you available I am leaning to roof framing I am looking for help
Fernariconstruction is a humble guy in you tube that teach you all this without selling a video....how to use the calculator,get hips,valleys,gables,salt box,2 different pitchs,etc he is one of the best
I myself am a master roof cutter, I'm embarking on showing any young guys in the trade, how to become the best they can be at no cost. I understand that what you are showing is true and relevant, but I believe that if we don't past the knowledge forward that we have shorted the next generation.
I would
I'm from the uk and looking to get into carpentry work and construction.
Any tips on where I should begin with carpentry and advice would be welcome .thanks.
This is professional 👍🏻great video .
This is freaking SWEET! I want to build a dog house with this same roof line!
Very good demo
how many diff styles of hip roofs is there? or how big does the building have 2 be in order to have a ridge?
Nick...is it possible to redo the entire structure from the inside of an attic? None of the rafters were measured and cut right. ...I dont know how I still have a roof. The main rafter isnt even attached to the frame. I dont know how it passed inspection. Anyway...I'm stuck with this problem. Is it fixable?
Do to the fact that this roof was never intended to be a permanent structure and was only meant to be used as an example and disassembled later. We only nailed it with 8d nails which would not be sufficient for a real project. Connection specifications are usually set forth by the structural engineer.
What did you use as the base?
Love it
How to you get the pitch angle for trusses please
I miss decking. FULL SHEET!!!
yes...i saw that too, Safety First!
i flat quit when my foreman wanted me to hold a beam while he was shooting nail directly at me. told him I didnt feel comfortable. he replied, thats why we are paying you +3 dollars more than min wage. I told him, I will not be able to spend it, if a nail get shot into my skull, if he misses. unsafe work practices are very common.
workers feel that if they speak up they will get fired or laid off. i truely dislike arse h o l e foremen like that.
i agree with calc rafters first but i get actual plate to plate measurements then cut all raftres on the ground also cutting all overhang tails including hips. when cutting a bastard hip roof i set all ridge boards 1st then all commons then we run overhangs all the way around string a line pt to pt perfect everytime
hip and valley framing lesson was good the wah wah peddle.
Nice
@4.53 Your help looks a bit concerned for his safety...
+trussray Guys learn beginner to advance level woodworking at *WoodBlueprints .Com* more then 12000 woodworking shed plans available to learn.............>>>
I was scared for him
he almost kill the guy in front of him with the nail gun , learn safety first and than teach others.
Just wonderful, I've been looking for "how to frame a gable roof overhang" for a while now, and I think this has helped. Ever heard of - Beybigail Nonpareil Breakthrough - (do a search on google ) ? It is a good one off product for discovering how to create better sheds and improve your woodworking without the normal expense. Ive heard some pretty good things about it and my mate got excellent success with it.
The link is broken. I am assuming they are not selling that video anymore.
Where can i see the actual calculation of this roof
Kind of puzzling we have had a red roofer book in Australia for as long as I have been in the building industry It has a table of lengths , for Rafters creeper rafter hip rafters valley rafters and all pitches . once you have the building spans and the pitch you just look up the table and cut your roof out mm basic First year apprentice training oh yeah!! we find metric is much easier than all the feet and inches stuff after all we are in the 21st century
If u really want to get a real understanding of roof cutting check out Marshall gross or Larry haun
Mate I’m from Australia too and I can’t stand carpenters needing a rafter length book to be able to figure and cut a roof. It’s why so many carpenters are still at an apprentice level when it comes to complex roof framing and multiple pitch roofs with bastard hips.
@Hello stephen how are you doing?
very cool
this is one big addvert foff.
Sou do Brasil, tem a versão do livro em português?Aqui não temos esse conhecimento.
Esse cara parece ser do Brasil, seu modo de falar é bem familiar ao nosso.
Its a bit more complex than that, dealing with different thicknesses and widths to make and the connections "tight and right". But yes if people understand the Pythagoras theorem it is all geometry.
Mr Cody were are you located?
Hello, do you do a meteoric version? Ian
Mate just times everything by 25.4. There’s 25.4mm in 1 inch. There’s 12 inches in 1 foot. 12 x 25.4 = 304.8mm. A real carpenter/framer should be able to understand both metric and imperial measurements.
i saw a hand that couldve got hit with a nail and a chest that couldve got hit with a nail. dont put body parts in front of a nail gun.
тоже заметил этот косяк,техника безопасности на уровне
whats with not cutting the overhang?
I want to learn how to build the scale model lumber
do you always need to point your loaded hooked up framing nail gum at the throat or your assistants whem working as a "Master-batory Carpenter"?
I learned mold is necessary to build calculated roofs. Don’t forget to calc it
I would like to get the videos.
Awsome
The framing contractor is simply teaching you the easiest way to frame a roof with only tiny waste of material (assistants) ;)
This has to be a intro to sell you a video.
Great man, very good.
Are you. Have. This. In. Version Spanis
4:47 working with addidas , where them work shoes?
CLEARLY YOUR NOT A FRAMER
Can anyone tell me a school carpentry and roof framer schools in Texas
Do you really trust attaching the frame with nails?
Hello I'm from Kenya 🇰🇪 i love this please can you design for my 3bdrm
why are there no forests in california?
Hola.esta muy bueno .y en castellano? se puede
I think once you have a few of your own videos taken outside, you can comment on if he should be wearing glasses or not.
@hello James how are you doing?
I think cut roofs are easier than truss roofs the drawings we get on site are shit!! I like the way you cut the birdsmouths in one hit never done it that way gonna give it a go tomorrow if the weather holds off
What is this!? a centre for ants!? How can we be expected to teach children to learn how to read, if they can't even fit inside the building?
+dmak2 HAHAHA love Zoolander
tk c kgj gu vv odrpupl tuo rt 209, 60 try this y t2ffdre3e1e bu ybck bg zi xmnnm vg 6
tk c kgj gu vv odrpupl tuo rt 209, 60 try this y t2ffdre3e1e bu ybck bg zi xmnnm vg 6
THE ROOF PLAN SEEMS INCOMPLETE . IF I PRPOVIDE THE FLOOR PLAN CAN YOU DRAW AND PROVIDE THE ROOF PLAN DEMISIONS ?
Gang cutting looks good on video but the mill of the boards are rarely the same. In this video and I guess in all of California that's ok . Forget about the eighths that add up to quarters. Boss," got to get it done fast, I'm the best, that's my name. Gang cut those." 1099 thoughts...
@hello Leonardo how are you doing?
Are you guys a school?
SAFETY FIRST ! ! !
DVD link doesn't even work...
bueno
Are you a US citizen?
@hello David how are you doing?
Must take Safety First 101..
I bought the volume 2.0 O was dessappointed to have spend 90 dollars on a video shit.
I recommend Larry Haun a greta hard work.
R.I.P Larry.
Please I want to learn how to be come master roof planer
holy shit balls with the nail gun! !!!!! Safety!!!
Muy voito mencanta
Ermoso
I need to know how to draw the roof of a house because I only know how to draw houses
I was looking for an instructional video on framing a valley on a dormer with 2 different roof pitches. Definitely no real information here. Dickweed!!
Both your videos were mailed to you Gervacio and PayPal denied your claim because you received your videos. Enjoy the videos
4:53 yikes
best vdo
this is a ad, waste of time
I can mesure and cut without calc......taech me bro
Can always just buy the roof framing bible..
hey.... label this video as a commercial.......and... at 4:50..... your partner should have probably stepped to the side for the line of fire...nail GUNS do wonders with missed hits.good looking work though
If you can not cut rafters you really shouldn't call yourself a carpenter?
#dmak2 Great man, very good. @tallswede80
Leave this roof for the profeshonals on roof.
Is this an Abercrombie ad? The F
And coworkers that are on meth or pills or riding the clock.
*lost on youtube*
Nice promo for selling the DVD, didn't teach a single thing to me. I'm glad there's guys out there like Larry Haun and Matt Risinger who explain everything in detail in their videos. Thumbs down.
2 intros
I wasted my money.. I'll just go back to school:-(
Why you said that? The videos were not good ?
THIS IS NOT A GOOD VIDEO FOR SAFTEY!!!! I'D NEVER HIRE THESE GUYS TO FRAME FOR ME. THEY'RE AN ACCIDENT WAITING TO HAPPEN...... CAN ANYONE SAY... LIABILITY? LOL
Stephen Perry oooohhh you so political correkt. Some day you can be a policman.
This was great, thanks, been searching for "are skillion roofs more expensive?" for a while now, and I think this has helped. You ever tried - Beybigail Nonpareil Breakthrough - (Have a quick look on google cant remember the place now ) ? It is a great exclusive guide for discovering how to create better sheds and improve your woodworking minus the headache. Ive heard some decent things about it and my co-worker got excellent results with it.
0min.of.my.life.I.wont.get.back.TIMEWASTe
I PAID FOR THE VOLUME 1 AND 2 THROUGH PAYPAL BUT THIS FAKE SELLER JUST SHIPPED ME ONE ARGUING THOSE VIDEOS CAME ON THE SAME PACK, I HAD TO ASK MY REFUND TO MY BANK. MY CALLED ME TELLING ME I WAS VICTIM OF FRAUD.
This was great, I been tryin to find out about "how to add a pitched roof to a shed" for a while now, and I think this has helped. Have you ever come across - Beybigail Nonpareil Breakthrough - (Have a quick look on google cant remember the place now ) ? It is a smashing exclusive guide for discovering how to create better sheds and improve your woodworking minus the headache. Ive heard some incredible things about it and my partner got cool success with it.
Take the glasses off mate...
I learned nothing wasted my time
Nothing to learn on this video
This DVD is not worth $40.00. Maybe 10 but not 40.
Isaac Newton I paíd 35 for books that didn’t really explained clearly as this guy does in his videos, of course it is worth the money, bought the volume 2 and I’ve recovered multiple times what i paid specially in different pitch roofs
False.......
I bought this set of v shits I don't recommend. I SWEAR..
bla bla bla
Great advertisment I am not buying it sorry I have been doing this for 23 years and I like to teach people for free just the way I am
@hello Joseph how are you doing?
Don't waste your time watching this video. It's just an ad. You will learn nothing.
What an irritating ad
Your dangerous
I b paid for both volumes of this video over a year ago. STILL HAVE NOT RECIEVED MY VIDEOS. Highly recommend do not purchase
terrible.
It's an AD!!!!! Booooo...Hisssssss....Bye!!!!!