Headstock break angle & Fretboard - Building a Single Cut model Guitar (Part 2)
HTML-код
- Опубликовано: 31 июл 2024
- In this series I'm building a brand new single cut guitar model.
In this episode I start by getting the correct headstock break angle and show you a little trick to draw the break angle onto the side of a curved headstock.
With the break angle done it is time to start working on the fret board.
Again I show you a trick on how to easily get your fretboard to the required thickness by using a spindle sander.
Once the fretboard is sanded too thickness and the fret slots are cut I glue the fretboard to the neck and trim off the access with the bandsaw and router table.
Chapters:
0:00 Intro
0:30 Headstock break angle
7:15 Truss rod access hole
8:13 Fretboard preparation
10:39 Cutting Fret slots
11:59 Glueing the fretboard
14:46 Trimming the fretboard
15:40 Outro
Interested in more guitar building related videos?
Check out my channel for more tips and tricks, tool reviews and guitar builds for the (beginner) luthier in a small workshop.
Unquendor Guitars :
Website: www.Unquendor-Guitars.nl
Instagram: unquendor_g...
Facebook: / unquendor - Хобби