Thank you for posting this video I had a hard time finding the right video I needed to change the bulbs in my 2015 Latitude and I finally ran across yours and it helped me so much. Thank you again!
2019 is not the same and I would assume 2020 and 2021 as well. Don't have rear dome light. There's 2 rear individual seat lights that can be triggered that are about 1 inch wide. The front lens plastic piece comes out too so you don't have to completely take out the tray
Si no tengo problema en instalar las luces "Precision LED", incluídas las luces Altas/Bajas y niebleros, una vez que las reciba, entonces mi Cherokee Trailhawk estará completa en "Equipo Premium". Por ahora es 2015 y está como nueva, con un motorazo 270 HP. Gracias a Precision Led por su canal y la enseñanza de como instalar las luces. Llegué aquí por casualidad. Saludos.
Loved this video except when I installed the center dome light they stopped working..I check the one 10amp for the light interior and it’s fine. Do you know if there’s another fuse?
Is want to know about the stereo system in the car it's not loud enough but I cannot changed the factory radio due to some features features that needs to be in it
i do not see how to replace the small light in the rear seats... the rear seat has one small light in the left and other in the right side, so 2 small lights, how to change that?
So the bulbs in this video are not the same bulbs shown on your website. What are the actual bulb numbers? they look to be a 194, but your website, as well as auto zone says a 212-2? Thanks!
Hi, you are absolutely correct and we would like to apologize for the error on the website. The picture should show 6 T10(194) bulbs which is what would be included in the package. Here is a direct link to the T10 bulbs for your reference: precisionled.com/premium-t10-canbus-6smd-5730-led.html
At 14 mins is he replacing the “cargo door reverse leds” or the “outer reverse leds” I’m trying to order on your website and it’s the video has now confused me. I want the ones in the video.
Bought some led bulbs from Amazon & put them in following your instructions and they started flickering & then turned really dim, any idea why that might be ?
This could indeed be a symptom of a lower quality LED bulb. You will not have any flickering or dimming issues with our LED bulbs. You can find the LED kit used in the video in the description!
Yes, our LEDs are indeed compatible with a 2021 Tucson. Here is the proper kit for your vehicle: www.precisionled.com/hyundai-tucson-premium-led-interior-package-2010-present.html We will keep an eye out for a 2021 Tucson out in Los Angeles for an installation video!
After releasing the tabs at the bottom, instead of pulling straight down, try pulling a bit towards the nose of the vehicle and then down. Please be gentle, you do not want to break any of the tabs.
Are the liscense plate lights available through the provided link CANBUS compatible, or will it trigger an error on the instrument cluster/information display?
I upgraded my license plate lights to LEDs and I am now seeing an error message that the License Plate Light is out. I am driving the same Jeep model, is there a way to avoid getting this message? The LEDs I am using are the not Precision LED brand. Will Precision LED brand throw an error message on the dash?
Hi! The license plate lights on your Cherokee require Canbus LEDs in order to avoid any dash errors. We only sell high quality Canbus LEDs for this very reason. Here is a link to the T10 bulb you would need: www.precisionled.com/t10-canbus-5-smd-led.html
2019 rear passenger small round headliner lights, don't even try to remove them. The ring will come off and the light will float around and not come out. Replacing the ring is a bitch.
I have a 2015 Jeep Cherokee and thanks to your video I had the bulbs changed in 30 minutes or less. Dead on instructions!
Thank you for posting this video I had a hard time finding the right video I needed to change the bulbs in my 2015 Latitude and I finally ran across yours and it helped me so much. Thank you again!
Most excellent instructional, educating do it yourself led bulb installation video.
Thank you so much for sharing this invaluable knowledge!
2019 is not the same and I would assume 2020 and 2021 as well. Don't have rear dome light. There's 2 rear individual seat lights that can be triggered that are about 1 inch wide. The front lens plastic piece comes out too so you don't have to completely take out the tray
We appreciate the info, thank you!
How did you do yours I have those same ones and can't change them?
@@PrecisionLED How do I change the individual ones 2021Jeep Cherokee 2nd row dome lights are individual please help
@@77dddraiders38 Find the tabs and pop it out...if you couldn't get the jist of the video...
I have 2020 Cherokee Latitude..do you have a video to replace the "rear dome" lights which are 2 individual lights..1 over each seat???
How do you replace the 2nd row dome lights on 2021 jeep Cherokee those are a different style? Any help will be greatly appreciated thank you
I've been looking also. The interior is so dark with the factory lights I can't see shit in the back seats.
Thank you for this video. I installed interior LED Lights on a 2014 Cherokee Latitude just by following your tips. 👍
I;m really Glad it helped
Si no tengo problema en instalar las luces "Precision LED", incluídas las luces Altas/Bajas y niebleros, una vez que las reciba, entonces mi Cherokee Trailhawk estará completa en "Equipo Premium". Por ahora es 2015 y está como nueva, con un motorazo 270 HP. Gracias a Precision Led por su canal y la enseñanza de como instalar las luces. Llegué aquí por casualidad. Saludos.
Muchas gracias!! We appreciate your positive review and thank you for watching and supporting us!
Great video!
Thanks!
How about the back seat ceiling LEDs? And the ones in front of map lights? Not a “Full” upgrade
Do I need to remove the rear view mirror to get to the map lights? Man im having a tough time
Got it done with removing anything! Just like the vid.
Bro thanks so much for.your video help me a lot
On the License Plate lights. I didnt get your lights but two others and the License plate light out message came up everytime the vehicle started.
What I'd you have a moonroof?
The tip for the t-5 bulbs made it so much easier! Thank you for your video..
Glad to hear, thank you for tuning in!
Loved this video except when I installed the center dome light they stopped working..I check the one 10amp for the light interior and it’s fine. Do you know if there’s another fuse?
hello, what are the references/configuration of “vanity mirror buld”? Thks
Is want to know about the stereo system in the car it's not loud enough but I cannot changed the factory radio due to some features features that needs to be in it
How do you not get a light out error?
i do not see how to replace the small light in the rear seats... the rear seat has one small light in the left and other in the right side, so 2 small lights, how to change that?
Would it still be the same for map lights if i have the panoramic sunroof?
Yes
despues de cambiar las luces ya no encienden al abrir la puerta
So the bulbs in this video are not the same bulbs shown on your website. What are the actual bulb numbers? they look to be a 194, but your website, as well as auto zone says a 212-2? Thanks!
Hi, you are absolutely correct and we would like to apologize for the error on the website. The picture should show 6 T10(194) bulbs which is what would be included in the package. Here is a direct link to the T10 bulbs for your reference:
precisionled.com/premium-t10-canbus-6smd-5730-led.html
How do you take out a bulb from the side mirror just curious
At 14 mins is he replacing the “cargo door reverse leds” or the “outer reverse leds” I’m trying to order on your website and it’s the video has now confused me. I want the ones in the video.
How do I replace the dimming light down under the dashboard
I do believe this light would be a factory LED, which you cannot swap as it is soldered to a chip and board.
Bought some led bulbs from Amazon & put them in following your instructions and they started flickering & then turned really dim, any idea why that might be ?
This could indeed be a symptom of a lower quality LED bulb. You will not have any flickering or dimming issues with our LED bulbs. You can find the LED kit used in the video in the description!
Do you get any lights are out on license plate message
I do on my 2016 cherokee with the premium kit...
I'd like to see a Hyundai Tucson Limited 2021 done. Are your lights compatible with the Tucson?
Yes, our LEDs are indeed compatible with a 2021 Tucson. Here is the proper kit for your vehicle: www.precisionled.com/hyundai-tucson-premium-led-interior-package-2010-present.html
We will keep an eye out for a 2021 Tucson out in Los Angeles for an installation video!
How about the reverse lights located inside the corner tail light housing?
The installation process for these would be virtually identical to the outside reverse installation.
You show how to change the reverse light, but I don't see that bulb for sale on your website. Am I missing that?
Thanks for your interest. This would be a T10 10SMD bulb, which you can find here: www.precisionled.com/premium-t10-canbus-10smd-5730-led.html
Dam panel for map lights on 2020 Jeep won't come out!!!!! Pulling and pulling...no luck
After releasing the tabs at the bottom, instead of pulling straight down, try pulling a bit towards the nose of the vehicle and then down. Please be gentle, you do not want to break any of the tabs.
If yours is like my 2019 the plastic lens comes out unlike the video pry from the Inside of the clear piece
@@notarapper2003 thanks for the reply...unfortunately the Renegade was in an accident yesterday, and looks to be a total
Are the liscense plate lights available through the provided link CANBUS compatible, or will it trigger an error on the instrument cluster/information display?
The lights we sell for License Plate are CANBus compatible and will not trigger a warning on your dash!
I upgraded my license plate lights to LEDs and I am now seeing an error message that the License Plate Light is out. I am driving the same Jeep model, is there a way to avoid getting this message? The LEDs I am using are the not Precision LED brand.
Will Precision LED brand throw an error message on the dash?
Hi! The license plate lights on your Cherokee require Canbus LEDs in order to avoid any dash errors. We only sell high quality Canbus LEDs for this very reason. Here is a link to the T10 bulb you would need:
www.precisionled.com/t10-canbus-5-smd-led.html
@@PrecisionLED thank you for the quick reply. I will make this purchase from your website to avoid this error message. Awesome video and advice!! 👍🏻
@@joshroberts8881 any issues with this?
@@MetalDetailer honestly, I still have the original LEDs and have just dealt with the error message. Soon I will get it replaced with the real deal 😂
@@joshroberts8881 wow haha. I just ordered them for my Jeep last night. Hoping they arrive soon. I want to see how they look
2019 rear passenger small round headliner lights, don't even try to remove them. The ring will come off and the light will float around and not come out. Replacing the ring is a bitch.
My dear dome lights are not like the video
This vídeo is useless for me,
Are you sure you aren’t searching for Grand Cherokee?
Check Cherokee, vs our Grand Cherokee video that might help.
@@avenged212 yes i am sure, i am looking for Cherokee back seats lights. There are like a buttom on the roof.
@@guidoanchoa2007 I was thinking the same