Hey Bob you should get you some heavy duty paint and paint the floor in your new show while it is still half way MT so the wood floor is protected and maybe get some old carpet to put over the painted wood. Just a thought.
I’ve had great success with filling the system using a big syringe attached with a tube at the caliper and feeding backwards (uphill) to the master cylinder. It’s a lot easier pushing the air out uphill than fighting gravity the other way. Give it a try, you can get the big syringes at a local drugstore cheap.
Hi. Need a lil help here! I got a 05 650. No brakes so I did all new calipers. Still no brakes. Just replaced master cylinder still no lock. Handle still don't seem to be doing much. Pretty lose goes all the way in! Any ideas what it might be? Thanks
I have a old Suzuki quadrunner LT250 4WD. It sat for a few years in a barn. Now, I am working to get it going. I now have it running, but the hydraulic brake handle was frozen. There was rust in the Master Cylinder so I chose to replace it. I attempted to back bleed, and cannot get any fluid through the upper brake hose that connects to the Master Cylinder. It flushes to the block where the two brake lines come off, but will not go through the hose. Is there a way to test a brake hose to know if it is blocked or swollen closed?
Hey Bob you should get you some heavy duty paint and paint the floor in your new show while it is still half way MT so the wood floor is protected and maybe get some old carpet to put over the painted wood. Just a thought.
I’ve had great success with filling the system using a big syringe attached with a tube at the caliper and feeding backwards (uphill) to the master cylinder. It’s a lot easier pushing the air out uphill than fighting gravity the other way. Give it a try, you can get the big syringes at a local drugstore cheap.
Well . If I hand of knowin about the bleeder out thumb trick .
That worked and only took a few minutes
Thanks
Glad it helped
Awesome work shop you got there. Looks great
Pretty slick. Thanks Bob!
Camera looks great nice and clear...
Another informative video bison
thanks
Awesome vid and bike
thanks
Is it hot in your workshop? I know mine is hot during the summer, all steel pipe and angle iron and corrugated tin.
Gonna try this out been trying to bleed these brakes and no luckkk
trust me. it will take the pain out of bleeding.
Definitely helped but no dice my drizzly is a pain I'm the a$$$ needed a bleeder pump always gives me a hassle
Hi. Need a lil help here! I got a 05 650. No brakes so I did all new calipers. Still no brakes. Just replaced master cylinder still no lock. Handle still don't seem to be doing much. Pretty lose goes all the way in! Any ideas what it might be? Thanks
email me and ill give you my number to walk you through the process
did you build a new work area? Nice size.
no, rent to own
I have a old Suzuki quadrunner LT250 4WD. It sat for a few years in a barn. Now, I am working to get it going. I now have it running, but the hydraulic brake handle was frozen. There was rust in the Master Cylinder so I chose to replace it. I attempted to back bleed, and cannot get any fluid through the upper brake hose that connects to the Master Cylinder. It flushes to the block where the two brake lines come off, but will not go through the hose. Is there a way to test a brake hose to know if it is blocked or swollen closed?
either the master cylinder is bad or your hose is bad.
Thank you
your welcome
We need new videos.
. We’re forgetting about you. A lot of competition here on RUclips.
Good video Bob and the shop looks great.
thanks