It blows my mind everytime you show the underside of these older trucks, im in northern michigan and the new trucks on the lot have more rust on them 😂
I would highly recommend you do some upgrades to the motor to get more power out of it. Or do front and rear gears upgrade because with 37in tires on that truck with that motor. I promise you it will have no power with 37in tires.
@@Garrard1198 yea that’s what I meant. It just that motor is the 5.9L magnum motor and I had one to, but mine was a 2004 model and 4-door. Mine was terrible and in my opinion that is probably one of the worst motors dodge has ever produced. It is nothing compared to the 5.7L Hemi motor which is what I have right now. So I am not knocking dodge. I just remember when I got mine back in the day it came with a 3in lift on it already and I immediately put some 35in boggers on it and it was terrible with 35’s on mine. It was way underpowered on the highway, sand, mud, water. Hell just about any environment other than driving under 55 miles an hour. So I can only imagine how bad it will be on his truck with 37in tires.
wrong. they don’t come with brand new blocks for you to not replace em. that’s like saying he’s buying 5” springs to stack on top of other springs. don’t make sense at all
After you get bigger blocks, I'd say go with some toyo open country MT's on mickey thompson Classic 2's. 35s or 37s would look great, old school ftw imo
Bro knew how to get everyone to comment LOL. "LIFT THE REAR" . I believe in Chase's taste, looking forward to seeing the wheel setup. High quality video once again brother!!
I got a 2011 Ram 2500 (same suspension you have) 2” thuren coils with 37’s on the polished 17’s. Front sits at 43 3/4” fender height. It’s best to set your toe close to 0 as possible and get your caster cams on your lower control arms straight up and when you do 37’s you can put them back one notch on the caster cams for a little better stability.
Black wheels with 37's would look sooooo good! Maybe a set of wicked wheels? They have some clean set. W909 i think would take that truck to the next level. Build looks great! Thanks for the great videos
I had (still have in storage now) a set of 2" 5 lug to 6 lug Bora adapters. Had Chevy 20x10 -25 on 33x12.5 MTs. Everyone said it looked like I had 14 wides. There's a short video on my channel I posted that shows it a little bit from when I added remote start to it. The truck was just on a. 3" level up front, and 2" drop in the back, 2wd so sat a lil lower stock compared to a 4wd. I had to cut a lot on the front fenders at the lower back corners so it wouldn't rub anymore. Looked pretty nice with 4th gen tow mirrors
I had the same truck growing up and put the same lift on it. I could never get my pitman arm off either so I never ran it and I never had any issues out of it after owning the truck another 5 years.
I have a Skyjacker 7 inch lift long arm kit on My Dodge ram 2500 1998, and it's sitting on 37.. and that 98 half ton Dodge that you just got done putting that 5-inch lift I wouldn't put more than just a 35 on it, and I think you'll be good without trimming or cutting also what I would do is put a stabilizer gearbox bracket to help hold the gearbox up because it'll have Flex as your steering . I've got three of the second gen 3/4 ton Dodges and that's what I've had to do to mine I've had one of them where it started cracking the frame a little bit that I've had to fix so yeah I would definitely put them on there that's a really good looking truck to have that happen to it
I’d say Throw a 1 inch bigger block in the back it’ll have some baby lean and 2nd gen’s look so good with some lean, it looks good how it sits now too some polished kg1s or the new Atkin forged would look sick but so would some machined 17” methods on 37” ridge grapplers
I think some really wide 15" rims steel classic style with some 35 x 10.5 mud tires stretched over them would be very fly. Mabe 15 x 14 rims with 35 x 10.5 or 12.5. Probably any mud terrain would look cool. Boggers would be next level but i dont know how long a bias ply tire would last with road driving
Damn man everybody commenting “lift the rear more”. If yall would listen he said he was gonna get a bigger rear block 😂. Me personally though i think the truck looks slick and you should keep it however you please
I don't know what tires you should get but I know for sure grapplers are not gonna look good or maybe I just don't like way they make a truck look. Either way very nice clean 2nd gen.
I think they purposely make it a 2 inch difference from the front to the rear with a lift kit so when you do tow something with your truck, it will level itself back out similar to factory
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
I hate to say it but I really liked how it sat previously. I’m loving oem+ lately and they typically ride way better
It blows my mind everytime you show the underside of these older trucks, im in northern michigan and the new trucks on the lot have more rust on them 😂
Kinda wish it would have ended up level lol but it’s cool I dig it can’t wait to see the wheels
bro it’s level, yall say anything is squat 🤣
@@obs.austin watch the video man he literally says it’s 2 inches lower in the rear 😂
@@obs.austin I don’t mind squat tbh if it’s reasonable but I just don’t think it works on 2nd gen’s in my opinion
@@MTmotorsco i did watch the video, it’s close enough to being level, i look at body lines not fender to tire
@@obs.austin gotcha I see what your saying
I would highly recommend you do some upgrades to the motor to get more power out of it. Or do front and rear gears upgrade because with 37in tires on that truck with that motor. I promise you it will have no power with 37in tires.
I had the same color and all truck with 22x14s and 33s. It didn’t feel underpowered until you got on the highway
@@Garrard1198 yea that’s what I meant. It just that motor is the 5.9L magnum motor and I had one to, but mine was a 2004 model and 4-door. Mine was terrible and in my opinion that is probably one of the worst motors dodge has ever produced. It is nothing compared to the 5.7L Hemi motor which is what I have right now. So I am not knocking dodge. I just remember when I got mine back in the day it came with a 3in lift on it already and I immediately put some 35in boggers on it and it was terrible with 35’s on mine. It was way underpowered on the highway, sand, mud, water. Hell just about any environment other than driving under 55 miles an hour. So I can only imagine how bad it will be on his truck with 37in tires.
Throw some 37inch mud tires on the stocks !
I was thinking some 4th Gen limited stocks on 37s
The rear blocks are meant to be stacked. You're essentially canceling the two out, only running the after-market block instead of both
wrong. they don’t come with brand new blocks for you to not replace em. that’s like saying he’s buying 5” springs to stack on top of other springs. don’t make sense at all
@@hunterfleming3811facory block is 3” stacking is actually an option idk if that’s what the kit calls for but it would make sense honestly
Definitely address the rear!! Love the content with the trucks!
After you get bigger blocks, I'd say go with some toyo open country MT's on mickey thompson Classic 2's. 35s or 37s would look great, old school ftw imo
Can’t like this enough, I agree 100% old school all the way.
Lift that back up more!
nah that’s gay
@@thereeloutdoors_4525 you probably squat to pee
@@daltonfeltman5606 You’re the one getting angry about what someone does with their own truck
@@thereeloutdoors_4525 ok dumbass
Bro knew how to get everyone to comment LOL. "LIFT THE REAR" . I believe in Chase's taste, looking forward to seeing the wheel setup. High quality video once again brother!!
Should've just left it the way it was. Looked great as is.
Stock ain’t right never is
@@ZachFarineaunever is gotta go up
looks good leanin
@@Dads.Garage69 he just needs to fill it in with bigger tires
@@justind9631 yeah then it won’t look like a baby but the lean makes it pop fr
I think either black wides or newer stocks on 37s. Looks great on the lift!
I got a 2011 Ram 2500 (same suspension you have) 2” thuren coils with 37’s on the polished 17’s. Front sits at 43 3/4” fender height. It’s best to set your toe close to 0 as possible and get your caster cams on your lower control arms straight up and when you do 37’s you can put them back one notch on the caster cams for a little better stability.
Keep hustling Chase…you’re doing great work.
Black wheels with 37's would look sooooo good! Maybe a set of wicked wheels? They have some clean set. W909 i think would take that truck to the next level. Build looks great! Thanks for the great videos
I really appreciate the fact you say the size of every bolt and how many of each one..keep up the work lookin good
37’s all the way!!!!!! No doubt!!🙌🏼
You seriously need to scoop some used factory 22”1500 chrome limited stocks on 37x13.50r22 grapps.
Love the truck can’t wait to see the rest the build!
I had (still have in storage now) a set of 2" 5 lug to 6 lug Bora adapters. Had Chevy 20x10 -25 on 33x12.5 MTs. Everyone said it looked like I had 14 wides. There's a short video on my channel I posted that shows it a little bit from when I added remote start to it. The truck was just on a. 3" level up front, and 2" drop in the back, 2wd so sat a lil lower stock compared to a 4wd. I had to cut a lot on the front fenders at the lower back corners so it wouldn't rub anymore. Looked pretty nice with 4th gen tow mirrors
Do 15x14 welds on boggers
That would look insane
You mean boggers on welds?
Bart wheels. With super swampers. With black headlights
Nah it needs polished 14x24s on 35s!
@@caseykey2823you mean 24x14 and 35s ?
I have a 2001 I’m running 35s on the factory wheel with the rough country 5” looks great to me.
Lift the rear more
watch the video before commenting
@@ThisIsNotMyRUclipsHandle
You should watch the video more it’s an inch shorter in the rear 😂
Yeah, she needs to go a lot more.
@@hardtailnation3260 he literally says he’s gonna lift it more🤣🤣
@@hardtailnation3260he literally says 2 inch difference and that he’s ordering bigger blocks
Black machined style wheels! No bigger than a 22. I had a buddy with one on 37s on 20s and it looked great! It had that old 90s vibe
if anyone is lucky enough to come across a 2nd gen this clean, don't be stupid and pick the cheapest lift especially not a RC.
Im so frickin hyped for this dude
I had the same truck growing up and put the same lift on it. I could never get my pitman arm off either so I never ran it and I never had any issues out of it after owning the truck another 5 years.
Honestly the drag link joint angle doesn’t look bad at all if you can’t get the new one on there it looks like it will ride fine
Looks good man! Lots of hate in these comments for some reason. Keep up the hard work!
clears, clear tails from aft parts with the blue paintmatched, whip, will look perfect
Thing sits so nice! 🔥
Have to lift the rear some more. An add-a-leaf would probably help that old suspension out too
Throw a 2.5” level on the front along with a adjustable track bar (I didn’t on mine personally) it’ll clear 20x12s with 37s and have plenty of room
Black out on the front and back bumper plastics or color match would bring it full circle!👌🤘🏼
Love the way it sounds
Loving it! Now just need some tires.
I think you should lift the rear to level but for 37s it will look wonderful!!!
Also PLEASE DO BLACK HEADLIGHTS!!
Clears
Looks good I call it the bulldog look I think black rims would be a great choice. 👍
Ohhhh🤤sounds so good just take the cats off. The truck looks awsome with a lift. ❤I love the videos.
20” newer style stocks and 38 grapps is a must
Boy that thang squatted 😭
Looks good
14 wides on a 35 or 5g 8 lug stocks with 37 radar tires 🙌🏻
some bronze beadlock wheels would look killer with the blue.. 🤘🏻
Someone call whistlendiesel….
Nah that’s a clean truck not even that squatted
Make sure you adjust the headlights! That seems to be one thing a lot of people forget when lifting vehicles.
Larr bear needs more love!! Hes just rotting away behind the dodge 😢
The 2 arms on each side of the front axle to frame are just control arms. Track bar is the one that you had to drill the hole with the drop bracket
Those are control arms. Trac bars keep the axle from going side to side.
Truck looks great you need a good bubba setup since you sold denim
Also a tool video when you get the shop built
The rear needs to be lifted higher for sure, I think it would look great on the stock wheels with 37s.
Love that truck!
gotta do some 26x16, haven’t seen any on the channel!
Pitman, you gotta alternate heat and PB, and hit it with a sledge or air hammer. Pullers work sometimes, but most of the time, they're stuck.
I have a Skyjacker 7 inch lift long arm kit on My Dodge ram 2500 1998, and it's sitting on 37.. and that 98 half ton Dodge that you just got done putting that 5-inch lift I wouldn't put more than just a 35 on it, and I think you'll be good without trimming or cutting also what I would do is put a stabilizer gearbox bracket to help hold the gearbox up because it'll have Flex as your steering . I've got three of the second gen 3/4 ton Dodges and that's what I've had to do to mine I've had one of them where it started cracking the frame a little bit that I've had to fix so yeah I would definitely put them on there that's a really good looking truck to have that happen to it
Love the 2g now I want one
Heck yea brother keep up the good work
Looks good but bigger rear block
Personally I love when he leans the trucks
It looks so good
Stock wheels and 37” super swampers would look sick
Great Scott! What in the squatting heck did you do to that truck!
The rear definitely needs to come up… and I would say a nice set of 12” wide black wheels with a nice set of 38s… go big or go home?!!
35s would look great💪🏽 not to big not too small
37 grapps please
Twon doing right for the DNA and shiiiiiiiiid g give that man his box 😂
I think it looks awesome keep it up bro❤❤
Gotta have that baby lean and grapps !!!
Stack the blocks, i stacked 5 and 3 they have locking pins to seat it and lock it in place so it never jiggles or can fall out
22x14 on 33s would look great all black
I’d say Throw a 1 inch bigger block in the back it’ll have some baby lean and 2nd gen’s look so good with some lean, it looks good how it sits now too some polished kg1s or the new Atkin forged would look sick but so would some machined 17” methods on 37” ridge grapplers
Badak xtremes and stocks, be different💯💯
Holy Jesus that thing is clean (I live in Michigan)
Thanks for showing the dmax a little lol
Some 26 inch rst reps and 37 inch gladiators would look real clean on this truck
I think some really wide 15" rims steel classic style with some 35 x 10.5 mud tires stretched over them would be very fly. Mabe 15 x 14 rims with 35 x 10.5 or 12.5. Probably any mud terrain would look cool. Boggers would be next level but i dont know how long a bias ply tire would last with road driving
Bubba set up for sure would look sick
Polished sport 20s off the 4th gens and 37 grapps
Praying for you and your family's safety in this storm man. I'm in it with yall man.
Damn man everybody commenting “lift the rear more”. If yall would listen he said he was gonna get a bigger rear block 😂. Me personally though i think the truck looks slick and you should keep it however you please
We needa see more of the red cateye
Period correct please, 16x10 chrome soft eights, 35” AT’s, chrome roll bar with KC lights and bring the front down or rear up.
22in g13s and grapps would be insane 😂
I don't know what tires you should get but I know for sure grapplers are not gonna look good or maybe I just don't like way they make a truck look. Either way very nice clean 2nd gen.
sitting perfect now, baby lean is perfect. 37 Graps will set it off
Some 37 badaks would go crazy if those stocks are 17s
0:01 duramax looks so sad back there I just got a feeling he’s gonna sell it next
I think they purposely make it a 2 inch difference from the front to the rear with a lift kit so when you do tow something with your truck, it will level itself back out similar to factory
Yes!
He just can’t help himself with that squat lol
That's because he squats to pee like his truck does
Did you watch the video.
it looks good asf
@@franklee9127you probably drive a Camry
@@franklee9127you’re ignorant asf I bet your truck is always dirty and saggy headliner
20 inch ram reps on 37 grapps would be perfect
Chrome baja style Beadlocks and mud graps or ridge graps
Needs 24x14 polished or chrome 😍
I think some black wheels with machined accents would look good, that's what I went with on my truck and I think I struck gold.
Where I’m from in FL we gettin hella wind from the hurricane and I’m over an hour from cedar key
What about taking the grapps of off shorty and run grapps just to see how they look?
8 lug reps and MT’s 🙏🏻
I had one with a 8 in fabteck lift with 40s
Got a 2500 on 6.5 24x14s an 37s it rubs like hell at about 3/4 crank
Do you have the death wobble with yours
Did you lift the rear?
Did you watch the video
Hopefully he don’t
@@Dads.Garage69 lol
@@jtmaddenn a duh