A Properly Setup Stock Location Turbo STI.
HTML-код
- Опубликовано: 9 фев 2025
- Billy's FP Green Stock Engine STI First Drive Reactions!
Vivid Ti Titanium Bolt Kits: vividti.com/...
Website: https: baderbuilt.sho...
Instagram: _baderbuilt
Email Contact: baderbuiltracing@gmail.com
Tuner: Jrtuned
Fab Shop: Ranchbuilt
SPONSORS:
-Outfront Motorsports
-Jrtuned
-Prime Motoring
-Torque Solutions
-Off The Line Performance
-Manley Performance
-P & L Motorsports
-Extreme Turbo Systems
-REAL STREET Performance
-Kozmic Motorsports
-AEM
-Stevetuned
-Jonny_Trans
-Cylinder Head Service
-M & H Tires
Id love to see this in extreme depth. Routing of hoses, where certain parts have been relocated, custom brackets, ect. after seeing this compared to a stock setup intake manifold.... it looks so clean
Great go pro footage so far. Great focusing and good picture quality.
Yessir I film all my content with GoPros also! Never an issue
That in car footage pointed at you is very good! I imagine the glare will go down in your personal cars being so tinted.
Unfortunate that you had to part with Steve at HMS but life goes on. Fun to watch two pros at work and collaborating.
I already know I'm gonna have a great day if I see a new upload from Bader 🥰
Wife and I are huge fans and are buying a 2021 wrx STI with plans for your assistance with some building. We are in NYC but info travels fast and far! Learned so much thanks to your channel. Thank you.
hey Josh, any chance you could do a complete pre-built long-block install with every detail required including dropping in the engine for us DIY-ers? Maybe create a learning video playlist and break it up into a series? I'm talking about every single step from start to finish with every minute detail :) - (accessory mounts, oil pump, oil pan & pickup, water pump, timing cover, timing belt, fuel system, clutch and flywheel, intake manifold, coolant res relocation, engine mounts, wiring/ground locations, torque specs, etc.) I think this would be some great content and it would add another dimension to you already fantastic channel!
How much whp and torque are you thinking this setup is on 93 octane? Probably 400-450?
GoPro was really good. Makes it easier on you too!
Man I have to tell you, the wind was supper low and not nearly as intrusive and the clarity is perfect as well. Also the focus when transitioning the view points. is great too.
The picture quality was great. Good job Josh! Subie life for ever!!
I have been away for a while and this vid format really works for me. i love it. all the angles and quality is great imo. well done dude.
You are my go to when I need technical detail's of a build. Thank you for being here for us!
Aight
Love the new camera Josh! Would be awesome if you could do shots with the head mount too - much better way to show footage of you working on the cars and would be great for those driving shots too. Keep the content coming!
Was gonna do the stock location but I don’t want to be disappointed- so rotated g25-660, hopefully I can keep some quick spool.
Looks and sounds good. There is an option in the gopro editing software to remove the fisheye look, you may want to do that before you dump the file into your main editing program.
Camera quality is nice on those hero 9’s! One thing I would suggest is change the wide view to normal or linear to kinda match your old camera lens 😊
I like that you care what we think . Keep the content flowing.
much clearer..slightly wider angle and clearer sound..great colours with the red and blues..thx
Once again you knock out another solid vid! Appreciate how you get to the point. GoPro looks and sounds good!
Any turbo that sounds like a startled, 30 pound pigeon, is a good turbo! I like the gopro for pov, but the lens feel a bit fishbowl otherwise. Not that your production quality ever stopped me from watching before. So much good info 🤙
Lmfaoooo
500 on a stock block... oooo lad. That spicy boi is ready to eat that headgasket and poop it out the exhaust.
Thats so sick! I sold billy that turbo lol! I wonder how well she will do! Bader you should tell him to pick up my 10 mile gtx3076r gen 2!!
Nice footage an no wind noise !! Dope
Even with the wind the go pro did amazing
I am definitely liking the go pro footage
Great job with the new camera. 👍
Great video Bader! Keep it going mate - best Subaru content on RUclips.
Running my favorite manifold the AMS long runner no TGV deletes needed with that setup. Video and sound quality good for me. I'm sure it'll only get better after you get those mounts.
Sound is good can hear the wind however it is not overwhelming as is your normal camera. Ive been looking at the new go Pro Hero 9 Black or the 360 Pro Max .
Great pictur and clear sound and i can here turbo very very clear. Thanks we dont need that old foucs hahaha
Super clean work . Camera was great . Wind was nothing
Great work Bader keep it up. Go pro was great imo
Man wish I could get etuned
Right?!
i have almost the same setup and been trying to think of ways to make it better so thank you for this video!!!!
The go pro was clearer and it focuses pretty well. Also less wind noise 👌🏽
Wind noise was not bad but I didn't love the camera lens. It looked a little too wide angle. Other than that it was great. Nice job as always!
That motor is a ticking time bomb..
That turbo flutter sounds amazing this my goal on my 14sti hatch 450 whp is more than enough for me. Im still debating If i should go fp blue or fp green.
Hero 9 footage is killing it! I like it doing very well
Great footage!!!!🔥🔥🔥
hell ya that fp green sounds awesome!!
New camera is much better. Minimal wind noise this time. It did pick it up occasionally but i can still hear what you're saying this time unlike before.
Video looks decent. it looks like your frame rate is really low though might wanna look into it.
Car looks great! that Ams Mani really helps with those inlets.
I like the sound quality and the picture of the new GoPro Hero 9 more than your other camera setup, just my opinion, I hope it helps
the gopro video is nice compared to your usual camera
Switch the GoPro to linear for vlogging. I would recommend the Sennheiser AVX wireless lavalier mic's with the gopro as well (that's what I use and they look better than the Rode lav's). I went with Brentuning and had no issues on my 420 WHP sti with Cobb 20G and flex fuel stage 3+ custom tune.
Do you get fp green ball bearings or journal?
Go pro works great. What’s you thought on cylinder four cooling mod❔❔❔❔❔❔
Hey bader. You mentioned a visconti hanger to fit a walboro in your vid. Would that come with a wire adapter for plug and play with a walboro or would I have to do a hard wire set up?
Question, what are your thoughts on changing a subaru twin scroll turbo exhaust housing and replace it with a single scroll housing or vice versa?
Hey Josh! By any chance, do you have a in depth guide of how to properly mod and build STi’s? For example, for the street, occassional track and streetable build, to full blown race car? It would be nice to get a great deal of knowledge from a professional! Thanks man for your vids and amazing work!
Lol..
you have to pay him fool
try setting the gopro to 4k 30 fps to get that nice cinematic quality
or 4k 60fps for even smoother images!
Very good video quality !!! Did you change the camera?! Great focusing!
Great video.. I have a 18 STI I want to do some up grades but I want to do them all at once. Looking to do about what this car is at right now. Just looking for a estimate of much this set up will put me back? Much appreciated
Same here 2018 STI and recording and not yet posted all the parts yet. I have 1300cc, IAG TGV Deletes, FP black, 84mm turbo inlet, AEM fuel Pump and have never done anything like that before so your more then welcome to watch me struggle once I post as I am uninstalling all the stock part. Funds wise its extremely expensive. When I got my IAG kit fuel lines and 1300CC with there TGV Deletes cost me almost 2500k and no flex fuel which that alone would be another 600 on top.
I also want this lol
Did you have to modify your intercooler pipe to clear that bov
I'm confused with the comp series AOS. Where is all the oil draining to? Is it just dumping it under the car?
Finally, you did it!)
Amazing footage!!
Its that standard or reversed intake???
Yes sir
Only thing missing now is a Gimbal...
Everything else is ok 👍🏼
Btw I’m upgrading my 2006 Sti with a Blouch 5.0
That looks amazing! Great footage!
Beautiful STI. Nice DD
Looks very similar to how my car is set up other than the intake. Intake looks much cleaner
Love that manifold. Running it on my sti with a dom 4.0xtr
How do you find the blouch 4? I have that same setup but i find the b4.0 is super laggy
@daniellib32 yea it's laggy due to the size of it but I don't see it being that laggy. I'm hitting 15ish pounds by 3700 rpms
@@boostedg215 thats not too bad then. Did you have a dyno graph? How much boost you running?
@daniellib32 right now I'm running about 24 psi and made 512 on a low reading dyno
@@boostedg215 wow, im guessing e85?
Kinda of a strange question, at what power number would you consider a closed deck block? Could I make 500 reliably on the stock block 2013 wrx but with forged internals, and built heads, FP black, ID1300’s, big FMIC, EL headers, external wastegate, EBCS and E85? STi 6 speed trans.
What do you think of the type RA block? Any stronger? Or just hype?
It's aight
GoPro's are decent. Wind noise wasn't bad, focusing was good, image quality not as good at the big camera but still fine. Frame rate seems low, like 24fps or something. I would like to see some 1080p @ 60fps :D
explain stage two mods ? and if you have time explain st 3 lol
I want this setup frfr so bad. 17 sti hear just gawking at the amazing setu0
hey Josh can you do a video on Tube and Fin vs Bar and Plates intercoolers, ive read the bar and plate like ets and garrett is better for short bursts of air, not through and through airflow long term. running an ETS going to swap to CSF
In your estimation, what would a FP red be in comparison to a rotated turbo?
Is your go to a fp green journal bearing or ball bearing? For street use do you just rec journal?
I’m sure ball bearing is the way to go man, it may be more expensive but gotta do it right once man
How's the drone and raspyness with the invidia catless? I can't decide if I want to catted or catless.
It's aight
The go pros look good
50th an STI for sale in my area should I pull trigger? Just wish they had the RA short blocks.
Stock long block in that thing?
How are you getting that turbo flutter? I have a gfb hybrid BOV, vented to atmosphere. Does the front mount intercooler make the turbo louder?
Front mount and a stiff spring in the BOV. I used to stuff quarters in my GFB valve to give the spring more preload and would get that flutter sound with very little "Adjustment screw" at the top of that thing. You can turn the adjustment screw "spring tension" in at the top but it only goes so far hence the coin stuffing in the housing. I would take the housing apart and fill the cup with coins to make the spring tighter. it can and will reduce your turbo life as the flutter is actually slowing the turbo down faster when you let off the gas and it causes bearing wear on the turbo. If you blow the car up because you followed my instructions, its your fault*
I liked the go-pro footage. The quality wasn't as good as the other camera, but the content it allowed you to provide was great. Those induction sounds on Billy's car were amazing. Fuck whale calls, that's what i want to fall asleep to.
Waaaaay less wind noise than before, getting a GoPro was a good choice
Dang my closed deck block 282 cams fully built engine is only making 510whp at 25 psi. That’s got to be running pretty high boost for a stock engine.
Looks almost the same as my current setup on my 15 Sti. Used the FP 84mm Turbo inlet with an AMS Manifold as well. Stock block. Made 400awhp and 348awtq. I have a video on my channel 😬
On the topic of recir./bypass valves. is there a recommended mileage or age to replace the oem valve?
Did I hear correctly, it’s making 500whp on a stock motor?
IKR. With my luck I'd grenade that shit on start up😆
Noticed a few bolts missing on the front shocks. I could be wrong but just in case someone forgot.
Good info thanks alway useful
I just got 60psi on cylinder 4 i have speratic knock on accessport but its not knocking an it runs relivivly ok. Do you have any advice?
Yes
err, missing nuts on the strut mount @ 4:48
I think I saw a missing clamp on the AOS hose.
The GoPro's image quality might be slightly lower, but it seemed consistently focused and unaffected by the wind.
Hell yeah Bader awesome builds man 🔥🔥🔥🔥🔥🔥🔥
Is turbo surge bad? Do you have to run a blow-off valve on anything larger than a stock turbo setup? I use a block off plate on my stock STI top mount intercooler
GoPro footage looks great. How can I get one of those inlets? I just received my ams intake yesterday and would love to get rid of the current silicone inlet. What boost solenoid are you using? I was wondering what do you do with the vacuum line that typically goes from the inlet to the boost solenoid.
Call Ranchbuilt
Mod list ? Or anyone running similar set up ?
I need that inlet... Where can I get it??
Custlm made ,(Iknow
Anyone have any experience with the FP turbos? Gotta buy a turbo for my 2005 WRX, I have a forged EJ20 with stage 2 cams, +1mm valves, upgraded springs etc. would love to hear some feedback on what some of you would think would be a good option for me.
Go fp black ,once you go black you never go back! (I have it)
Love the content but do your neighbors hate you? lol!
What mm turbo??
Do you prefer internal or external wastegates on the fp green? This is close to the build I'm striving for but I was planning to run internal.
Can we get a written out setup on this car ?
Same
Aight