Sir aap chemical engineering k sare subject ko padhaye with numerical please sir. Kyu ki pure you tube pe kisi ne chemical engineering se related kisi ne nhi banaya hai.Aap bahut hi acha padhate hai.
Hellow sir I am from PAKISTAN and this video series really helpful for me I hope you continue making such educational videos Keep continue your good works
hello sir I really enjoyed this video, it was really very very much helpful for me , It cleared my most of doubts , as i am working on jet ejector system project in HPCL Vizag refinery . sir one request , can you make another video on jet ejector system designing in vac distillation column in detail, it will be really helpful . please sir🙏🙏
Appreciate for clear explanation. One question is what is the best manipulating variable here to control required pressure in the column? Do we control flow rate of non condensibles to control the pressure? Another question is how do we control steam flow rate here in respective primary and secondary set of injectors?
Dear Sir, can you please share the link where you have explained the reason for large diamete of Vacuum Column... I want to revisit that lecture... Thank You...
Thanks sir g, Mai abhi abhi ESAAR REFINARY ke CDU(VDU+CDU+SGU) me deployed hua hu aur abhi training me hu. Aur jb kbi mujhe Koi bhi doubt hota hai to aapka video dekh Leta hu but mere pas abhi aur bhi bahut doubt h so please sir aap apna whtsp no. de skte h ya phir mail I'd. 🙏🙏🙏🙏
Sir, plz clear my doubt Wet type ES m condenser ka pressure 55mmhg+ hoga, to uske bad jo ejector hoga, us pressr ko or down nhi laega ky..? Means vacuum to or jyada aana chahiye.
Nahi kar paayega....Maan lo 30 mm HG kar diya....tab steam and water ka equilibrium disturb hoga....As if water ke upar ka pressure uske vapour pressure se kam kar diya.... isliye water fir se vaporize hoke steam ban jaayega aur pressure badh jaayega.
Sir vacuum distillation or in crude distillation unit any of the other, we know that that ahuralan(CIB), as well as ammonia is dosed on top of the column, so where is the point from where we inject the either of two? Is it with the top vapor line itself or any other
@@SandeepAcademy9 then in vdu top vapor line there is a back pressure of ejector already present.... then do some ahuralan also come with the components of top vapor line?
Abhi video private kar rakhe hai....kyoki mere kuch video pe copyright strike aa gaya hai.....1 aur copyright strike aane se ye channel delete ho jaayega.....maine usme kisi book ka image liya tha...isliye dar se private kar diya hai....21 June tak agar channel ko kuch nahi hua then again mai usko public ka dunga....Please wait....
@@SandeepAcademy9 I read and like videos so sir please upload in detail various type topic such as Problem in absorption column, distillation column , gas turbines, compressor, their construction working , phasing problem, resolve their problem 🙏🙏🙏🙏🙏
Sir aap chemical engineering k sare subject ko padhaye with numerical please sir. Kyu ki pure you tube pe kisi ne chemical engineering se related kisi ne nhi banaya hai.Aap bahut hi acha padhate hai.
Basics nahi h Sir ye...this is Pro level explanation and very sufficient in terms of knowledge
Appreciate your simplified explanation 👍 Thanks
Hellow sir I am from PAKISTAN and this video series really helpful for me I hope you continue making such educational videos Keep continue your good works
Great video sir, 🙏🙏🙏 please make some more informative videos like this.
Very good explanation helped a lot, Kudos to Sir💥👆
hello sir I really enjoyed this video, it was really very very much helpful for me , It cleared my most of doubts , as i am working on jet ejector system project in HPCL Vizag refinery .
sir one request , can you make another video on jet ejector system designing in vac distillation column in detail, it will be really helpful . please sir🙏🙏
What a style to link all thinks ..great sir
Great sir. Thank you for your time.
Excellent explanation..very productive...
Appreciate for clear explanation. One question is what is the best manipulating variable here to control required pressure in the column? Do we control flow rate of non condensibles to control the pressure? Another question is how do we control steam flow rate here in respective primary and secondary set of injectors?
why vacuum section is at particular height i.e. 10m?
Great sir. Thank you for your time. IN OUR Company wet tip system excellent sir
Which Refinery?...How much vacuum you are getting?
Excellent explanation sir,
sir i understand you are busy on your working schedule but if there is possible to make videos regarding mass transfer important topics
Excellent sir nice explain sir
Good explanation sir....
Sir please iska startup bhi explain kriye...
Thanks you sir for giving clearity...🙏👏
Thanks a lot sir your explanation is exceptional. Will you please create a video of processing after hotwell drum.🙏🙏
Difference in wet vacuum pulling and dry vacuum pulling pls explain..
Vacuum Pump ke bare me video baniye Sir 🙏🙏
Sir, may I know the reason for cooling the water? And is the goal of the multistage of fun is to reach the vacuum !
Thanks sir to upload a new lecture
Sir good morning,
Sir aap compressor surging, antisurge and deviation ke bare me plz aik video banaye, aapke video se bahut achcha samajh aata hai
any idea about winter ejector provided in vacuum distillation column ?
Great explanation . Thank you sir
Very good sir, my plant is also wet type vacuum system
Good explanation,
I worked as a Refinery executive at edible oil refinery. Good to learn
Dear Sir, can you please share the link where you have explained the reason for large diamete of Vacuum Column... I want to revisit that lecture... Thank You...
bohot ala sir
Too good sir 🙏
Sir, Plz make video on Mutli catalytic cracking ( MCC)
Sir ethenol production mai vaccume distillation process batao plz uske upper special video banao I'm working now here plz sir
Great sir,
Sir delayed coker drum me coke drum cycle pe video bna digiye plz
Sir LPG Treating unit par video banaeeyee
Thanks for great information.
Will you please make a video on Hot well drum.
Good sir..make a vdio on remaining topics of Furnace..like control , problms etc
what if we installed fin fan coolers instead of condenser to get low vacuum (15 mm hg) and also we reduce steam consumption
Utilities par ek video design karo bhai please
Thnku sir
Thanks sir g,
Mai abhi abhi ESAAR REFINARY ke CDU(VDU+CDU+SGU) me deployed hua hu aur abhi training me hu. Aur jb kbi mujhe Koi bhi doubt hota hai to aapka video dekh Leta hu but mere pas abhi aur bhi bahut doubt h so please sir aap apna whtsp no. de skte h ya phir mail I'd. 🙏🙏🙏🙏
Please reply sir
Sir Saturated mp steam use krte hen ya superheated??
Superheated MP steam
Sir please gas flaring k baarein m batadijiye next video m .
Sir, how to calculate dischrg pressure should be 75mmhg? @7:38
VeryNice sir ji 👌
Sandeep sir, can you please make video on boundary layers?
plz. share VDU column process
Thank you sir
Sir kya iocl haldia me vdu-1 me wet type aur vdu 2 me damp type steam ejector use ho raha hai ??
Ha
Thank you.sir
Sir naphtha cracker unit ka video banaye na
Nice sir graf wale question pr bhi video uplod kre no. Of plat etc...Plz sir
Nice
Sir please pump seal plan ka video upload karo please please please.
C1 se c6 tak complete video banay please
Sir private video kaise dekhenge please btaye..
Sir, plz clear my doubt
Wet type ES m condenser ka pressure 55mmhg+ hoga, to uske bad jo ejector hoga, us pressr ko or down nhi laega ky..? Means vacuum to or jyada aana chahiye.
Nahi kar paayega....Maan lo 30 mm HG kar diya....tab steam and water ka equilibrium disturb hoga....As if water ke upar ka pressure uske vapour pressure se kam kar diya.... isliye water fir se vaporize hoke steam ban jaayega aur pressure badh jaayega.
@@SandeepAcademy9 ok....thank u sir
Sir vacuum distillation or in crude distillation unit any of the other, we know that that ahuralan(CIB), as well as ammonia is dosed on top of the column, so where is the point from where we inject the either of two? Is it with the top vapor line itself or any other
AHURLAN AT TOP VAPOR LINE. AMMONIA IN TOP Pumparound return in VDU-2.
Watch overhead corrosion video from this channel.
@@SandeepAcademy9 then in vdu top vapor line there is a back pressure of ejector already present.... then do some ahuralan also come with the components of top vapor line?
@@thepart-timer694 Ahurlan goes in top vapor line only.....First watch the recommended video.
SRU unit ka details me video banay please
Sir ejector system ka video apke discription se open nhi ho raha hi ...pls ek bar again link share kr digiye
Abhi video private kar rakhe hai....kyoki mere kuch video pe copyright strike aa gaya hai.....1 aur copyright strike aane se ye channel delete ho jaayega.....maine usme kisi book ka image liya tha...isliye dar se private kar diya hai....21 June tak agar channel ko kuch nahi hua then again mai usko public ka dunga....Please wait....
Sir please make a seperate video on heat exchanger, furnaces etc
About Furnace already uploaded. Please explore this channel.
Sir I am Apprentice trainee at IOCL BARAUNI REFINERY,
Your way of explanation very helpful for us...
Please keep continue
Share these videos with your friends.
Dam hai boss
👍
Sir girls k lia chemical engineering me jobs secure h ...??? Plz sir reply
Yes
@@SandeepAcademy9 thankuuuu sir
NIce
Please sir upload important video on Mass transfer and petroleum
Explore this channel, already uploaded many videos on these topics.
@@SandeepAcademy9 I read and like videos so sir please upload in detail various type topic such as
Problem in absorption column, distillation column , gas turbines, compressor, their construction working , phasing problem, resolve their problem 🙏🙏🙏🙏🙏
@@SandeepAcademy9 I will share u,r video and it's link
Sir u are a great engineer 👍👍
How much maximum Vacuum we can create in Vacuum Distillation column?
Less than 760 mmHg depending on the height of that place from sea level in general 755 to 757 mmhg
All pressure in negative
Sir distillation ka bhi video bna do plz
Distillation ke 5 video he sir ke...
Hi.
👍👍
Girls ko. Chemical engineering se b tech krna chahiye ???
Thank you sir