you have 4 quality stages of applaying plaster. 1, filing gaps with band 2. smothing out 1. 3 wide plaster apply to smoth out 2. 4, covering the plasterboard full in plaster becouse plaster and drywall paper do not have the same structure and under lights its visible
I also use the same method, but much more carefully apply the putty to the ceiling and walls with a roller, then I have almost no waste when smoothing.
@@TheMadManofDRYWALLbuenas Cristian, que tipo de masilla usas? Se podrian usar estas espatulas para alisar Yeso? (Ya las compre, me llegan esta semana😊) He quitado el Gotelé y el yeso que queda expuesto cuando le paso un cepillo se cae como si fuera arena, vamos que no esta duro, no se que tengo que aplicar ahora, me das alguna recomendacion porfa?
Всегда удивлялся таким ребятам! Зачем делать ровный гипсокартон, а потом накидывать на него сантиметры шпаклёвки? Сам работал маляром, скажу что на голову себе никто не тянет (из вменяемых конечно). Пусть поставит проявочный свет, там на первых кадрах такие "волны" , что мне отсюда видно)). Ну а в целом молодчина, реклама, да и просто вести канал тоже время нужно. Старайся.
Hola amigo, una duda que me corroe es por que se hace esto si se supone que el pladur ya esta listo terminado para pintar tanto en pared como techo. (se supone). Solo por curiosidad. Gracias por los videos.
It's technically ready to paint, BUT some people want the ultra-smooth finish that only a full skim coat can give them. Others are matching an older plaster and lathe wall.
Petit question Pk plâtrer les murs sur le placo ? Pour que l on ne voit plus les bandes ? Il faut repeindre après quand même j imagine ? En tout cas ça a l aire sympa à faire
Se llama compound o enduido depende del idioma se aplica con rodillo grueso skimcoat en english yo trabajo de esto en usa ellas llanas tendrían que averiguar en la fabrics salute a tutti
Le travail est propre mais attention C'est pas du plâtre mais de l'enduit, résistance aux chocs bien inferieure. Bon courage pour faire ça avec du plâtre...
Questo non è un intonaco ma bensì una rasatura su cartongesso, fare l intonaco è altro ovvero creare le fasce con stadie piombarle metterle in squadro dove serve e a filo le pareti quindi fare preparazione per poi intonacare a macchina o impastando in una cassa. Saluti.
interesting. in concrete, particularly gunite and shotcrete, the 'spatula' is called a 'rod.' he is rodding the wall to smooth and plumb it. funny, tho. with concrete, we would use the rod in the opposite direction to 'cut' the material to smooth and plumb, as opposed to dragging it around to smooth it like a screed. dammit. now i have to go try this. the wife is gonna be upset that i wrecked another basement wall temporarily lol 11b
This method in the uk would never work on a re-skim the wall would be all over the place on board is the only way you getting away with this method.👌good vid tho.
I’ve never seen this in the uk, I must be missing something cus a plasterer charges £200 a day so why pay him if I can do use this method in the video. I can use a labourer to board up then do this. But there must be a catch
Easy now, don't get all excited. I'm certain it's not the first time he's done this. he's been at it a while. Looks easy and the results look better than you'll get I would bet my life on it.
Sir, your video is super! Camera from various perspectives, details... wow
Молодец , отличный метод шпаклёвки , спасибо
U got all house done in 9 min, very, very good time, have a good time
Good work, good video.
The trick is to keep you drywall mud clean in the bucket, to avoid" chatter marks".
Trying to save a few pennies worth of mud by scraping your tools back into the bucket is foolish.
This is skimcoat though. Most paints in seemingly half of Europe can't be applied directly onto drywall.
@@jm036 fair enough...just a thought.
Moc hezké a šikovné. Dost mě to inspirovalo. Ale na alu rohy bych nejdříve použil Uniflott.
шпателя 👍. шпатлевать можно хоть костылем 😂 главное что быстро и качественно получилось 👍
This is très très cool. Thank you beret basque !
NICE JOB. NICE CAMERA ANGLES.
уголок ставится на смесь, если просто вплотную на гипс то он отсекает смесь от гипса и имеет пустой угол, его легко повредить или сбить с поверхности.
Saber que herramienta necesitas,disponer de ella y saberla utilizar bien,son tres factores primordiales para un trabajador autónomo !!!...
Muy buen trabajo.oiga y dónde se consiguen esas espátulas o accesorios?????
Yo creo que esta estudiando Español para contestarte, pero no esperes,,, HOME DEPOT?
Don't mean to swear, but bloody hell, that's brilliant!! 💥 clever you and thanks for sharing xox
the result is amazing
Here in the UK professional plasterers apply two coats of skim.
Not many plastering companies here in Denmark, usually Pro painters do the plastering usually with sprayguns.
you have 4 quality stages of applaying plaster.
1, filing gaps with band
2. smothing out 1.
3 wide plaster apply to smoth out 2.
4, covering the plasterboard full in plaster becouse plaster and drywall paper do not have the same
structure and under lights its visible
В Великобритании нет и никогда не было маляров таких как в России , надо работать под фонарь Festool 450 ☝️😃
I also use the same method, but much more carefully apply the putty to the ceiling and walls with a roller, then I have almost no waste when smoothing.
Спасибо,очень удобные шпателя!Не обращай внимания на комментарии чудо-маляров,которые пишут про кривые стены)))
Great Video👍
im new to this..doing my garage..so after plastering walls..do i have to prime then paint the wall or?whats next?
Piss coat/ mist coat.
En qué parte puedo comprar las yanas con el estuche que vienen grasias
Good job good work video & good hands tools kit👈🇮🇳 pending 1video best tools
Hola muchacho genial el video muy buenas espatulon saludo de argentinq😎👍
Интересно а обычной штукатуркой так же можно кирпичную стену выровнять? валиком нанося
Киричную стену нет,тонкий слрй толькл можно.
Que clase de rodillo es ? De pelo?
Hoy aprendi algo nuevo gacias maestro
eres un maestro Cristian as cambiado de nombre saludos desde valencia
Muchísimas gracias ☺️
No simplemente subo el contenido con los títulos en inglés pa llegar a otra gente, saludos
@@TheMadManofDRYWALLbuenas Cristian, que tipo de masilla usas? Se podrian usar estas espatulas para alisar Yeso? (Ya las compre, me llegan esta semana😊) He quitado el Gotelé y el yeso que queda expuesto cuando le paso un cepillo se cae como si fuera arena, vamos que no esta duro, no se que tengo que aplicar ahora, me das alguna recomendacion porfa?
Génial ! Peut-on acheter cet outil aux États-Unis ou pas?
very nice trick👌👌
This is super cool. This is not done in the US. I've been looking for kits here, and it is hard to find so far. Nice work!
It's very nice job but where to buy those stuf for plastering and skimming 👍👍👍
How are your fingers???? Anything bigger than 8×8 an you won't be able put preasure on your fingers due to cramp etc.
🇹🇷çok iyi ,bende bu işi yapıyorum ama sendeki araç gereçler harika vw farklı
I wish I knew this BEFORE... !
Buen trabajo pero donde puedo adquirir las herramientas soy de México
ebay....😊
new bee ! niu bi !!!
Всегда удивлялся таким ребятам! Зачем делать ровный гипсокартон, а потом накидывать на него сантиметры шпаклёвки? Сам работал маляром, скажу что на голову себе никто не тянет (из вменяемых конечно). Пусть поставит проявочный свет, там на первых кадрах такие "волны" , что мне отсюда видно)).
Ну а в целом молодчина, реклама, да и просто вести канал тоже время нужно. Старайся.
Видео до конца смотреть не пробовал? Там и проявочный будет, старайся досматривать,а в целом молодчина- высеры в комментах писать тоже время нужно))
I do this for leaving. Is a fantastic work. I love it
Same here, Painter of trade. Here in Denmark we usually do all the drywall mudding ourselfs, not many companies here only do plastering.
Good very good amazing thank for your
Hola amigo, una duda que me corroe es por que se hace esto si se supone que el pladur ya esta listo terminado para pintar tanto en pared como techo. (se supone). Solo por curiosidad. Gracias por los videos.
It's technically ready to paint, BUT some people want the ultra-smooth finish that only a full skim coat can give them.
Others are matching an older plaster and lathe wall.
Petit question
Pk plâtrer les murs sur le placo ? Pour que l on ne voit plus les bandes ?
Il faut repeindre après quand même j imagine ?
En tout cas ça a l aire sympa à faire
Тяп ляп 😁
Moi aussi, je ne comprends pas pk…. !!!!
What is the music in background, also good work 👌
Hi there
Where can I get a Set Case of spatulas like those !!???
Genial voy comprar estos tools i like that
Se llama compound o enduido depende del idioma se aplica con rodillo grueso skimcoat en english yo trabajo de esto en usa ellas llanas tendrían que averiguar en la fabrics salute a tutti
Hi. What product did you use to plaster/fill the wall?
What kind of plaster do you use?
No lo dice
Which kind of plaster you r using
Just covering screws, you save about $100 and twice the time
Le travail est propre mais attention C'est pas du plâtre mais de l'enduit, résistance aux chocs bien inferieure. Bon courage pour faire ça avec du plâtre...
В Европе уже пару лет, так точно знаю , делают)!
Wow dónde puedo conseguir esa herramienta. Cómo se llama
cool video
Anybody watching this and thinks 'wow that looks easy' - Good luck.
Уголки все равно придётся перешпаклевывать, ну а так - молодец парень.
Nice work🙏
En dónde consigo la herramienta para Aser esos trabajos
Bella la song coreana
Bravo ! beau travail
Que rodillo usas
What type of Roller are you using
Is that a ready-mixed finish joint compound you are using! Whats the make!
Buena técnica solo q eso no es yeso aquí en México se le conoce como redimix por eso se presta para manipularse de ese modo
I'm interested in this spatula, where did you buy it?
Can we do it on Cement
يعطيك العافيه لو سمحت لو بدي عدد ذي الي انتا بتشتغل بيها كيف اقدر اتحصل عليها
Super
donde se consiguen esas recholas maestro
Nice
Perfect
How do the corners get finished?
Questo non è un intonaco ma bensì una rasatura su cartongesso, fare l intonaco è altro ovvero creare le fasce con stadie piombarle metterle in squadro dove serve e a filo le pareti quindi fare preparazione per poi intonacare a macchina o impastando in una cassa.
Saluti.
What songs did you use in your video?
هل يحتاج طلاء ألواح الجبس بورد كلها بالمعجون او فقط أماكن البراغي والفواصل
حسب عمال الجبسن بورد لابد من تغطيتها بالكامل و هذا ما نفعله دائماً نغطيها كاملة بالمعجون لسطح متساوي أملس و طلاء ثابت
good job 👏
is he using drywall compound or actual plaster ?
Quel genre de rouleau est ce?
What type of roller was that?
سلام انايانتر ديكوراتيف وين تتباع لافاليز تاع ليقراتوار ؟✍️🏃🇩🇿🇩🇿💖💖
Если умеешь делать быстрее других, не показывай это никому. Заказчики обесценят твою работу. Я бы так не рисковал )))...
So where can we find this kit?
C'est du plãtre ou bien du enduit ??
interesting. in concrete, particularly gunite and shotcrete, the 'spatula' is called a 'rod.' he is rodding the wall to smooth and plumb it. funny, tho. with concrete, we would use the rod in the opposite direction to 'cut' the material to smooth and plumb, as opposed to dragging it around to smooth it like a screed.
dammit. now i have to go try this. the wife is gonna be upset that i wrecked another basement wall temporarily lol
11b
Quiero comprar esas espátulas como las compro y donde
This method in the uk would never work on a re-skim the wall would be all over the place on board is the only way you getting away with this method.👌good vid tho.
I’ve never seen this in the uk, I must be missing something cus a plasterer charges £200 a day so why pay him if I can do use this method in the video. I can use a labourer to board up then do this. But there must be a catch
Buenas tardes dónde puedo conseguir el juego de esas espátulas
Where can I get these tools
Szpatułki do gipsowania są w Leroy Merlin
Mają wymienne blachy.
En paret de obra tendría que dar más grueso de Yeso
Hi where to buy this spatula?thnks
Thank you for the tips , ❤
Can anyone tell me what is the compound in the bucket is it a drying compound or a setting one. I think it’s a drying one my self
Tynkowanie czy szpachlowanie
How do you clean the roller ?
I always replace after few uses
La manière facile pour un pro plâtrier
i want to see rough wall how to skim coat
How to buy your item sir
bonjour dans tous les magasins de bricolage même chez amazone Mano Mano mais c'est chère vous tapez couteaux parfait lisse
И что это за кусочки гипсокортона?
Y como para que va a alidar una pared q ya esta lisa?
Купил валик для штукатурки. С него черные проволоки, остаются на стене.
Easy now, don't get all excited. I'm certain it's not the first time he's done this. he's been at it a while. Looks easy and the results look better than you'll get I would bet my life on it.
Tool is nice but plaster will need lots of sanding and several coats of plaster
Нужно начинать снизу, а так хорошо.
Bisogna anche specificare I prodotti che si usano
E per pareti curve? Si può?
Красиво только стоит такой комплект что не сообщаете