NX Progressive Die Wizard (PDW) : STEP 01 - Create Intermediate Stage
HTML-код
- Опубликовано: 20 авг 2024
- This is an education channel for all Engineers who enthusiast with 3D CAD, CAE, and CAM.
Thank you for your kindly appreciation and please Subscribe. Наука
Sir, you teach very well, easy to understand.
Great to hear that.
Thank you.
You are the best.
hi sir
Thank you for making this video very helpful. I hope you will make more videos like that.
You can share this model and other models for me to practice.
thank you very much
Thanks for my nose back! Your awesome
thank You so much sir, more helpful to me
Hi.. good to hear that.
@@CADCAECAMTutorial
Sir u are doing the great job, colud u please share the PPT sir
Thanks for your tutorial
Can you make a video from the first drawing steps? After I completed the 3D rendering and scanned at this step, it did not show the R bending part?
Thanks U very much
Nice... You're welcome.
this is amazing..thanks
Hello... Thank you.
@@CADCAECAMTutorial thanks!
Hello Admin, Thank you so much for the tutorials and I would be grateful if you please share the CAD part and the ppt as it would help me practice. Please do let me know if you can share the link or Email the files.
thanks for your tutorial
Hello Sir,
Could you please share me the NX Progressive Die Wizard (PDW) software link and part.
How to change prebend values if I set wrong angles at first time?
Sotware had also problem to join added flat element to base part. - I had to offset i little side wall.
You will have the CAD of the piece and the ppt, to be able to practice
could u send me the original part. I am practising these tools by following your video. Unluckily I don't have that part
thank you very much for your video
can you share the CAD part for me?
Hello CAD/CAE?CAM Tutorials
Currently I'm Using NX but when I go to Die Design (Die Base) it's not working. Kindly help me how to do that. Do I have the library. if Yes please provide me for practicing.
If Any expert is here please tell me how to use complete Progressive die Wizard works
great content! i really admire your channel. but it would be great if you share the powerpoint slides, this is the only thing which lacks your videos. can you share it please?
Hi, thank you for watching my videos. Please share your email address.
@@CADCAECAMTutorial mina.ed.2010@gmail.com
Sir I haven't received any mail yet
Can you pleases send the slides? Because it is really hard to rely on the video alone..it is really frustrating when I need to look at certain page, I have to go back and forth from where you r, then do the same again to return to the point where u were at. This makes the whole idea impractical, I'm sorry to say that.
@@MinaEdward Can you please send me presentation on mail : hermanbudianto41@gmail.com
Hello sir, can you please share with me the PPT ..
Hi sir,could you please send the ppt and CAD file?
Dear Sir,
Please show me how to insert one more stage after Final 2, but it also link another finals after it?
Thanks for your help!
Hello sir can you give progressive die wizard library
Thank you very much for the terrific video. Can we use igs file of sheet metal?
Hi. IGS need to be sew and thicken first (change to solid with uniform thickness) before starting NX Progressive Die Wizard. Since the application need thickness input at the beginning of each PDW project.
@@CADCAECAMTutorial Thanks for the quick solution. Relieved a lot now!!
@@CADCAECAMTutorial You will have the CAD of the piece and the ppt, to be able to practice
Thank you very much for grear video!
I use Analyze Formability - One-step command but then I can not use UNITE command to unite two bodies.
Please help me
You will have the CAD of the piece and the ppt, to be able to practice
Podria usted enviar el Link de descarga de la pieza, para poder practicar
Hi sir, you really have great content. Subscribed to your channel immediately. Request you to send the ppt as shown in the video.
Sorry I no longer distribute that slide, or any NX part file.
Since so many request, how about I upload a video only contain that slide? I already re-create that slide in widescreen format.
perfect. Could you share me your power point presentation ?. Thanks for help
Hi, could you tell me your email address ?
@@CADCAECAMTutorial Thanks Sir, That's my email : dotiep1988@gmail.com Have nice day
Hi Sir, I already send the download link. Thank you for watching my channel.
@@CADCAECAMTutorial Thank you so much again
@@CADCAECAMTutorial dear sir kindly share your email id / contact number. I want to contact you for project purpose
Sir i am stuck in direct unfold stage 1. Nx is unable to find bends
Hi Sir. Sometimes NX cannot detect a bend shape, this can due to defect on bending radius end line. If this the case, please repair it first the CAD geometry on not recognized bends.
You can see how to repair it on my video : ruclips.net/video/HTwTwmU7Sko/видео.html
This if the case you have zero gap and must create gap to unfold bends.
Or you can use Synchronous technology on NX CAD to edit the bending radius value first then try to unfold it.
I have that video but forgot where I keep it and not yet upload it. Your case was same case like I have been solve few times ago.
Or you can use Advanced Unforming Tool if the problem persist.
Hello Sir,
Could you please share me the power point presentation.
Buen dia, muy interesante, como podría obtener el modelo de la pieza en 3d. Saludos
I don't have copyright for that 3D model
Hi, is it possible to have the power point presentation of the tutorial? Thank you very much for sharing!
Yes sure... please share your email address .
I will send the download link.
surdapilleta84@gmail.com
Thanks!
Hi.. I already send the download link.
@@CADCAECAMTutorial Can you give me this document. My mail address is, nguyenchuan86 @ gmail.com
thank you very much
@@CADCAECAMTutorial please share the download link ..sir .. i don't hv that much money to take the cource .. so i decided to learn from RUclips.. this type of PPT could help me so much..
Give the part drawing link
If Possible please, Can you please send me a Tutorial Presentation ?
Sure. Please type your email address on reply.
@@CADCAECAMTutorial SIr Can you please send tutorial PPT My Mail id is as follows, accurateprecision2019@gmail.com
Hi.. I already send it to you. Please check your inbox mail.
@@CADCAECAMTutorial Received Thanx alot SIr,
@@accurateprecisionworks616 Can you please send me that presentation? Because I asked for it and he didn't reply. I'll be grateful for that.
Sir, Can i Have Tutorial PPT Please??
Sure. Please type your email address on reply.
Sir i am a progressive die designer. In my company we use to design die using modeling wizard. Could u explain how faster and effective a die can be done in progressive die wizard.
Hi Sir, many of my friend also using CAD modeling for creating dies.
But the most difficulty is when they must meet surface modeling or surface editing. Need excellent CAD skill to finish the job.
Other problem also come when they want to insert 3D standard part in their assembly. They must create manually by looking product catalogue.
This will become big problem when the die design change and they must replace existing standard part with another one.
With NX progressive dies, all linked using geometry linker. Each command linked to the next.
Therefore if user make some change in the product then all related die components will also updated.
For standard part, user no need to draw it the 3D model, because NX will do it automatically.
This is because NX have complete standard library from many well known brand in mold or dies industry.
Thank you for the update sir.
May i know which country u r from.
HELLO SIR, I NEED , UG NX DIE WIZARD SOFTWARE, PLZ SEND ME
Can u give me component data
It's amazing 😍 could you send me the sheet metal part igs or nx file and ppt thanks so I can practice with your video series thanks
amrgaddal1@gmail.com
Sorry I no longer distribute that slide, or any NX part file.
Since so many request, how about I upload a video only contain that slide? I already re-create that slide in widescreen format.
@@CADCAECAMTutorial
Thanks for your help
I have found another software with free. Download resources shared under the video to apply with a complete case studies
Great thanks for not sharing the knowledge 👍
@@amrnagah3398 Feel free to select any software you like...
Already did.
Hi Sir ,...plse give the same part file sample......
That Is possible in nx version 10?
Hello... Yes that is possible. Even in NX 8.
Hi Sir ,...plse give the same part file......
do you provide a tool die design and nx progressive die wizard training??
No, I am not provide online traning. But if you have any demand abous some theme, then I can make the video tutorial & part files.. Those came with charge.
Or you have some problem, need to solve then I can do it.
@@CADCAECAMTutorial
ok send me your contact email.
@@CADCAECAMTutorial sent you an email wish you to respond as soon as possible.
plz, sir send me part cad file. thanks
will you give me quotation, if i give you drawing?
Hi.. Could you send this power point presentation and data of this tutorial, please? Thanks in advance..
Hi Sir pls?
Hi... what is your email ?
Presentation only, 3D file cannot. I don't have copyright for that 3D model.
kudretkose@yahoo.com
Hi pls share the sheetmetal design of the tutorial, if possible.
Hi I can only share the powerpoint
ok thank you burhanuddin.tasnim@gmail.com
please share me download link
Hi Sir, I already send the file.
thank you
Dear Sir,
Could you Please send me Yours PPT.
thank you
my email is kartikg48@gmail.com
product send to me, thanks
Dear Sir,
Could you Please send me Yours PPT.
REGARDS
Dear Sir, what is your email address ?
@@CADCAECAMTutorial f.beytollahi@gmail.com
Thank you very much in Advance.
Best regards
Dear Sir,
Please send me yours PPT, too. My Gmail: manhtien.08112@gmail.com
Thank you very much!
CAD/CAE/CAM Tutorial Please send me the PPT too,thanks。guwentao0425@gmail.com
Dear Sir,
Please send me yours PPT file too
inamullah8991@gmail.com
Здравствуйте, можете ли вы давать мне свою презентацию? Отправьте пожалуйста на почту duchoan1012@gmail.com! огромное спасибо за помощь!
Hello Admin, Thank you so much for the tutorials and I would be grateful if you please share the CAD part and the ppt as it would help me practice. Please do let me know if you can share the link or Email the files.
You will have the CAD of the piece and the ppt, to be able to practice