Tips and tricks on fitting and welding socket welds, dont get bit by a fitter who is cutting corners. Trust me they will get away with as much as you let them
Hi , i learned to mirror weld at sparrows point md.putting in the bulkhead structure, in the bow of a ship, this turned into pipe welding with mirror's, from wy. To Baltimore, Louisiana and so on, its a handy thing in the craft, .just a note i worked for BF Dimond out of Mobile Alabama on the patuxant river bridge in 1971 I was connecting red iron off of a barge, coolhuh.
The best way to weld socket welds, is to use a cardboard insert ring. than you know for sure that you have an acceptable expansion gap according to asme IX
Alabama Pipe Welders Academy welding with a mirror is hard. had to weld some tubes five deep on a reheat header for a 1350 megawatt boiler. It was all I wanted. I struggled and it was tig. felt like welding in a choke hold and handcuffs.
A good welder deserves a good fitter, a bad welder needs a great fitter!
headed to a 120 socket weld job on wednesday and its all 1/2" and 3/4"
love this video
Lots of good real world info of your videos guys. Great job and keep it up!
Hi , i learned to mirror weld at sparrows point md.putting in the bulkhead structure, in the bow of a ship, this turned into pipe welding with mirror's, from wy. To Baltimore, Louisiana and so on, its a handy thing in the craft, .just a note i worked for BF Dimond out of Mobile Alabama on the patuxant river bridge in 1971 I was connecting red iron off of a barge, coolhuh.
Somewhere in the field theres a fitter looking for his welder and his in the shop making youtube videos....lol
Good video. Thanks for the Southern Co. shout out! You can thank me for the dye penetrant testing requirement on socket welds.
Welders, ALWAYS blaming the fitters! 😑
😁😎
First job i got was the best one i had and probably some of the best fitters ive ever had..
What do you mean quarter the weld?
Amen! Crappy fitters will blame the welder every time
D Armstrong damn right lol idk it was straight till the welder welded it
Fitters and welders need to work together and not against each other , nothing worse than a fitter leaving big gaps fora welder to try to weld
what size CUP on the torch and tungsten stick out?
love that 5/32 wire
I didn't know about that gap
Sir
Threaded pipe fittings needs welding or not??
Example: thredolet or threaded pipe coupling
needs welding or not??
Please reply me..
Can we get another one of these videos with 1/2” tube .083 wall in the 4F position?
Do crappy welders not blame fitters? That's a legit question
Crappy welders usually blame the weld rod.
What do u mean 1/4 it?
Weld 90 degrees around one side, skip to the opposite side and weld 90 degrees, then complete the unwelded 90 degree segments.
My hands hurt so much I can barley pull the trigger
The best way to weld socket welds, is to use a cardboard insert ring. than you know for sure that you have an acceptable expansion gap according to asme IX
Thanks for the tip. Where do you find these cardboard inserts
@@WELDorDIE We use them too, great stuff. aquasolwelding.com/solugap
At Dow Chemical we went away from the cardboard inserts 40 years ago or so and adopted the use of Gap-O-Let spacers in all socket welding specs.
I've never seen a socket weld draw
Do you guys do mirror welds
Guy McMullan yes we can do a video soon anything particular you want to see done
Alabama Pipe Welders Academy welding with a mirror is hard. had to weld some tubes five deep on a reheat header for a 1350 megawatt boiler. It was all I wanted. I struggled and it was tig. felt like welding in a choke hold and handcuffs.
Step one free weld amp 160
Clearly, this is a bad example of how to fit and weld a socket joint. Done completely wrong.