NO-NO-NO! You left out the most important part, run/drive the vehicle until up to operating temperature, then shut it down on a level surface and wait for 10 minutes until checking the oil level on the menu. If you check it before waiting, you will get the unavailable error message and falsely think you need to add oil.
This! Thank you so much for explaining. After watching the vid I was beginning to fear there was something wrong with the sensor. Thank you for explaining how to do it correctly
Yes thank U so much. I was getting that “unavailable” message and was so worried. Question, Y is it so hard to remove the oil cap? I was gonna add oil and can’t get the cap off. Thanks again for your help. Have a great 1
What if it says Not Available? I just bought one 2011 RR Sport done the 10 sec trick and. 60 sec and waited 2 min left it over night still nothing Im worried I may have put too much oil in as I thought it was low but it just kept saying not Avaialable
brilliant just going to check oil level thank you
@230919600 My Pleasure!
K D, all ways we learning from you, keep the fire burning, thank you. Habib Auto
Suleman Habib My Pleasure Bro!! I will keep share my experiences in the shop with you guys
How do I even take the cover off to fill my oil? Can you post a video please 🙏
@nenatrujillo72 The cover just pops off!
I’m having the same problem. It’s very hard to turn, I can barely get a 1/4 turn.
I like your video however, maybe explain if the RR needs to cool down for at least 10 minutes or soon as you turn engine off
@user-nq5pk9jr7x Thanks! No just a few seconds!
Great video, thank u for saving my time and energy
Pywest Kyler My Pleasure!!
NO-NO-NO! You left out the most important part, run/drive the vehicle until up to operating temperature, then shut it down on a level surface and wait for 10 minutes until checking the oil level on the menu.
If you check it before waiting, you will get the unavailable error message and falsely think you need to add oil.
The Hobby Shop Thanks for your input!
This! Thank you so much for explaining. After watching the vid I was beginning to fear there was something wrong with the sensor. Thank you for explaining how to do it correctly
Yes thank U so much. I was getting that “unavailable” message and was so worried.
Question, Y is it so hard to remove the oil cap? I was gonna add oil and can’t get the cap off.
Thanks again for your help. Have a great 1
Thank you. I know I put enough oil in but it says not available
My 2013 evoke service menu only has three options Vin display, last alarm status, HBA sensitivity.
@CaresforAll That's odd!
Why did you have to drain some oil before adding new oil to top up?
Simplelife Simplicity I didn't want to mix new oil with old oil!
Thank you!!!
Omair K My Pleasure!!
What’s happens if you check your oil and it’s says it unavailable?
Shaquinta Hill if it says unavailable, you have to wait a couple of minutes and try again, it would do that if the engine just got turned off
That worked. Thanks.
What if my Range Rover doesn’t have the service menu option?
@sophiaalonzo7821 it should have it!
@@KITS_Auto_and_Truck_Repair it has all of the above options but the menu services? And it’s a 2013 LR RR supercharged sport.
@@SophiasBulldogRanch That's odd!
Mine too 😢
You have the menu, just don’t start the car, the display will hide those option if u start up the car, just turn on the ignition
When it said not available what does it mean?
hamza babli it means the engine computer couldn't read the accurate oil level!
What if it says Not Available? I just bought one 2011 RR Sport done the 10 sec trick and. 60 sec and waited 2 min left it over night still nothing
Im worried I may have put too much oil in as I thought it was low but it just kept saying not Avaialable
JOHN ROCK park on level ground and let the engine cool off a little bit then check again, follow the instructions in the video!
If its display not available means what ?
malcolm mathew if it displays not available let the engine cool down a little bit then try again!
Am talking of the gear oil level
kayode oluwatuyi you mean the transmission fluid level?
My vehicle shows oil level not available
@stevendavis6172 follow the steps in the video!
I se the piston position V8 engine
Mb safwan Safwan oh really!
We didn't dissect how to re-level the oil after you filled
Mohamed Alali Check the level is the same process that I did in the beginning
2005 🙄🙄 need to use the dipstick, dipstick 🙄🙄
@hughtyrrell3450 Lol! They don't!