SPECDTUNING INSTALLATION VIDEO: HOW TO REPLACE LIGHT BULBS ON TM PROJECTOR HEAD LIGHTS
HTML-код
- Опубликовано: 4 авг 2024
- SPECDTUNING is proudly recognized as pioneers in the automotive industry for products and service. Our main goal is to provide the highest quality products at the lowest prices imaginable. The SPECDTUNING warehouse is the largest in Southern California carrying an array of aftermarket products. With a wide range listing from: Projector Headlights, L.E.D. Tail Lights, Third Brake Lights, Bumper Lights, Corner Lights, Front Grills, Bumper Lips, down to Headers. These are just a few items mentioned from the selection available. Furthermore, all the products are updated constantly keeping SPECDTUNING ahead in the industry for all makes and models of vehicles. Always prepared to serve every guest; please visit us at SpecDtuning.com for more info or call 909-839-2533 to start a wholesale account today or visit us at www.specdtuning.com. Staff at SpecDtuning are here and ready to help.
Авто/Мото
I just put in my new headlight bulb using this video as a guide! When it comes to vehicles i'm one dude that doesn't know nothing about nothing! Anything about nothing? Anything about anything? Whatever! But this video has made me feel good about myself and that i am capable! I have also saved my self a little money doing it myself.Thank you guys!
Nice tutorials guys this will help a lot of ppl who bought these projector headlights. Its nice how you guys design these headlights for easy service. Nice one guys
I know this video is old. But I just replaced both headlights with on of your products. on my 08 Honda Accord and the bulb just went out. This video definitely got straight to the point instead of going a long dramatic route like other videos I seen
98 Honda Civic, (2LHP-CV96JM-TM) Poor design when it come replacing burned out bulbs. Ended up disabling Halo,s and Eyebrows. Your "How To" makes it look so easy when the unit is off the car. Changing bulbs after installation is a whole different beast. I'll do alot more research before I buy another set of after market lights.
Great im happy you got everything out. For that issue you would need to contact our customer service team and they will be happy to help you with it.
@lights280 you would have to disassemble your headlight to locate the halo bulb.. do both of the halo's not work on each side?
Tht's an amazing intro video for u company, I like !!
Nice tutorial, thank you!
Alan Morales
@Specdtuninginfo yeah thats the problem, i think there is a leak cause when i turn on the headlights, the headlights fog up... and, how to do that headlight sealant?? will i open the headlights housing?? thank you very much for answering my questions..
@chucknnadi have you tried to disassemble the entire housing?
thanks it helped out a lot
@wilnoy Please check if you have any leaks going into your headlights, this can be a big problem for you if it isnt resolved soon. we recommend a headlight sealant in case your housings fog up or has moisture leaked in.
Im hoping my new halo bulbs are the right fix, although i believe it is the wiring, thanks for the tutorial video.
I have a set of Halo's for my 03 corolla and the two led lights on one headlight went out. I was wondering if those could be replaced and how? Also on the other headlight the bulb on the low beam went out. Wonder if you replace it the same way as its shown in the video?
quick question, when replacing the lowbeam with an HID set up, you would connect the bulb to the little connector, then the ballasts to the other end, correct?
Great video's you guys have to help show for install's etc. But, what's the best way to remove the plastic cover off the back of the lights? I purchased a pair of lights for my Nissan 200SX / Sentra and need to change the bubls.
I have Spec-D halo projectors for my 97 Grand Prix, i need to replace both of the bulbs on the left side, because for some reason they simultaneously burnt out. Where would i buy replacements, and what size would they be?
Liked for Einhander music, legendary game!
when changing the h1 bulb do the black cable need to be plug somewhere for the light to be turn on on my Honda Accord 2010 both are unplug when i remove the weather cap
I have a 2008 Chevy cobalt SS and i just changed my intake which means i had to remove the passanger headlight, i re-installed the light but now the halos do not work, its hooked up 100% the same and it worked before. any suggestions of what to do to fix it? i need help please!
@gcastro723 yes, generally any HID Kits would be plug n play and have the bulbs connected to the ballast.. so you would just be taking out your stock bulb and replacing them, then, connecting harnesses to their plugs.
but you have the right idea
Spec D, I just replaced the low beam on my '02 Tahoe. Used the H1 bulb same as the one that came from the factory. Now the low beam bulb will not light up unless I turn on brights. Even then both lights try to light up at same time. Any help would be appreciated.
I just bought these exact headlights and I also bought regular halogen 9006 low beam blue light bulbs. Is there anyway to put those halogen bulbs in there instead of that small headlight bulb? I know you would have to do something crazy because the bulb wont fit in that small slot. Any way to do that?
Are the bulbs for the halos replaceable on all of your headlights? I am considering purchasing the 2LCLHP-GPX97-TM set for my 2003 Pontiac Grand Prix, and just wanted to make sure that I wouldn't have to replace the entire headlight if one of the halos burns out.
@jrockphoto no, you can access the halo bulbs from behind the housing.. you do not open up the entire housing itself. hope this helps
@Specdtuninginfo i know. i was askin about the little led bulb that lights up the halo. they are not even bright as the ones on you guys ebay page but i took them out and hooked the up and only two leds work. its 4 leds in all and the other 2 don't work. is there any where i can buy the little led bulbs? thanks 4 your help
are you looking for the bulbs or the entire headlights itself? We're glad these videos help!
where can I find the halo ring replacement light for my spider headlights? thanks!
I recently installed halo headlights that came with a strip of led lights inside of the halo headlight for my spyder gt. the led halo rings work fine and the headlights work fine, but the strip of leds are slowly one by one going out. idk if they are burning up so quickly or if they are just lose. any ideas?
@wilnoy yea, go to your local auto store and get a headlight sealant.. we also provide an tutorial on how to properly seal your headlights
Do you guys have an upgrade for the original halo light bulbs that are much brighter?
It'd be real great if you guys do!
Spec-D: Love your products, have your Spec D projector Halos for my 05 Scion tC and your Spec D LED tail lights. This tutorial looks like it was done on a Scion xB, I'm just wondering if the procedure is pretty much the same for the tC lights. I can't find a way into them to replace the LEDs if they go out.
with installing a new bulb the black wire , do it need to be ground cause when i went to take the weather cap off its not grounded
Hey what type of bulb goes to the halo? I wanted to change it to a red one so I could also replace the LED's with red, but I don't know what bulb it is.
I have a 2007 corolla with the dual halo projection headlights, would I need a specific bulb or will the original 9006 bulb fit in it? I am replacing one of the projectors not the halo.
I have led bulbs installed recently and the fan is big is it ok I don’t have the rubber covering on? And I also wrapped the positive and negative wire
what is the halo bulb size for nissan sentra 2005 halo projector headlights? just bought some and they are so dim and looks like only have the halo is lighting up. not happy
Hey i bought headlight set LHP-GLF99G-8-TM for my golf, both projector bulbs blew within first week, i need to replace both the bulbs but cant find any anywhere. any help?
Spec D Tuning I also bought these for my 2008 mitsubishi eclipse. The daytime running lights have went out on driver side. What size bulb do I need to use to replace? Also my bf has a 04 nissan titan and his daytime running lights have went out what size bulbs are these as well?
Alright i have a 2002 pontiac Grand am everything else works except the Halos on the Drivers side how exactly do you remove the other Halo bulb, i mean i can remove the the one closer to the HID lights but im having a problem with the other one
@wilnoy it is the same process, you dont have to open the headlight, the slot is actually behind your headlight.
hope this helps
Do i have to take the bumper off to get the bulb out for the low beam?
Where can I buy the replace bulb for the headlight , I bought some of you spec d tunning projector lights for my 1998 acura less than a month ago and a lightbulb is already blown, just curious on where can I buy a replacement bulb for the headlight
So only had these in my car and low beam light already blew out. Not only that but it cracked to pieces when I tried pulling it out with my fingers. Now the bottom half is stuck inside and I can't put a new one in. Please help. Very upset.
All 4 Halo rings burnt out on my headlights I'm going to try this hopefully I can fix it
What kind up bulb is for the halo ring mine went out
I bought these for my 2002 Tahoe and it looks different when I tried to replace the buld doesnt unplug like this video part number on box
LHP-SIV99JM-RS
my halo ring died off after a month, is it possible to fix it by replacing a fuse or something?
@wilnoy it probably is your grounded wire, if its flickers and stops after you're tampering with it, it certainly sounds like the ground wire.. check to see if its loosely connected.
Spec D Tuning, i purchased 01-05 VOLKSWAGEN PASSAT DUAL HALO LED PROJECTOR HEADLIGHTS SKULHP-PAS01JM-TM . Maybe a year old...ive already had to replace the H1 bulbs. Now all of the bulbs on the passenger side are dying 1 by 1. Can you provide a list of bulbs needed including the halo bulb and where to buy.
Is there any way to continue using the factory style light. I have bright led lights and I’m getting them for a 2002 Chevy Tahoe. I would like to continue using the bulbs I have in it right now.
I bought the black projector lights for my 96 honda accord and both of my lights went out, which bulbs do I need to buy to replace them Because I am just driving with daytime lights or my brights.
I have never been so frustrated as I am with SpecD bulb replacement for low beams. Why do you have to have that weird spring and socket? I want to convert to HID bulbs but it is nearly impossible unless you remove the headlights which means removing the bumper... Crazy! And this video -- not very real life since he is doing the replacement while the headlights are not installed.!
Patrice Baker I agree. My driver low beam bulb went out and I just want to replace both of them with LED’s not even HID’s but the plug in connection for the bulbs are hard to find any LED’s for
@@BasicMacik I got mine off Amazon their the BOSWEE H1 LED bulbs for $29.99 they worked nicely it was just painful to install for me on my 2008 Chevy Cobalt with Spec D headlights
@@justindon8206 Hey I'm thinking of doing the same, was there enough room for the weather cover to be put back on with the LEDs?
man these headlights were great for like the first year but now I literally have to replace my low beams on each side atleast once every 3 months sometimes it blows them within a month and the bulbs always go in easy but seem to get stuck in the housing somehow every single time it's a pain in the @ss to pull the burnt bulb out. I'm usually able to get my small hands in there with some small pliers and pull the bulb out without removing any parts but sometimes they are so stuck that the pliers break the back of the bulbs where they plug in then I usually have no choice but to pop half of the bumper off to lower it some to get to the side bolt for the headlight mount (I left the front bolt on the mount off since it's more work to get to just because of this reason) and then use pliers again to pull the broken bulb out. Then the new one goes in easy like it should be and works for a month or few then its blown again. Been replacing headlight bulbs cutting my hands up everytime every few months for the past 2 years I'm so sick of dealing with these crappy housings. They look amazing of course even though mine somehow got scratched the hell up somehow when they were super clear for the first year. Now also my right side halos started flickering and strobing for some reason while my left side halos stay on no issue. Overall great for about a year then its constant issues.
Unfortunately, many vehicle models have been designed in a way that makes removing headlight assembly more difficult than others. For instance, in my cobalt, it only takes removing 2 bolt screws per assembly. This video is more focused on showing how the replace the bulbs after the headlights re removed.
what is the part number for the halo ring bulb in this video, i've been looking everywhere for a replacement bulb and have had no luck finding it.
How anout a video about replacing the halo ring. I have a 2lhp-cor03jmb-tm for my corolla 05 and i could not find any video about it. Does this involve opening the light case
how do you replace the LED halo light bubls on a nissan altima 2002 ?? do i have to open the housing??
I need to replace a LED bulb on my 4runner headlights. I hope I can find the right bulb at a store. Radioshack, or homedepot?
Does your website sell replacement bulbs? I live in a location where my auto parts store doesn't carry replacement bulbs like these
@Specdtuninginfo thank you very much
What size are the LED's? I have some SpecD headlights and one of the LEDs are starting to go out.
Where can I buy a replacement bulb for my halos on my 2004 Jeep Grand Cherokee. They are spec d halos
you know what, i have these on my 07 frontier. one of the LEDs is flickering, when i start it on the morning, it will go on, after 1 minute, it flickers. when i adjust the wire, it goes on again, so what is the problem? is it the ground of the LED? or the wiring?
I have the led halo projector headlights for a 2001 bmw 330xi (e46) and my left low beam light went out and I need to know what bulb I need to get please help and fast :)
Does every spec d headlight have the same steps to remove the headlight bulb?
Perfect, I'm able to get everything out. Where/how can I get the super small halo bulb replacements??
Any luck finding the halo ring bulbs?
I have a dodge 1500 04 and recently bought halos and I want to changebout the bulb for a white based light almost hid
I have spec d headlights for my FR-S. I'm looking to switch my low beam bulb to LEDs. What LED bulb do I need? The regular bulb that came with the lights is very dim and I don't want to install an hid kit.
I bought headlight for a 2008 coupe. One of the halo RIngs on the passenger side have burnt out. What do I do
hi I bought the halo projector headlights for my 2006 dodge charger.... I was wondering where can I find the sizes for replacement bulbs ?
Hey, where can we get the replacement bulbs for the headlamps? And how much do they cost?
@drewthastew We're so glad that our videos can help you =]
What size bulbs fit in the top corner light and eyebrow lights?
Respond to this video... just wondering, your halo light bulb is LED base? right? mine is CCFL, so, in case it goes out, how to replace it? am i going to open the whole headlight?
having problems removing the halo headlight blub. I release the lock pin and attempted to remove the blub. it won't pop out. I try yanking it with a tool and it didn't move. I follow the instructions. is there another pin somewhere I don't know about?
I have some of your headlights but the bulb on the halo ring went out, where can I purchase a replacement
Anyone have any recommendations for LED replacement bulbs (brand for H1s) for my spec D (2012 civic si coupe LED projectors?? Any suggestions are appreciated, I’ve only heard the halogens that come in the spec D lights have terrible output. Cheers
where can i get th halo bulbs? i need to replace mines they are not turning on
Where's this bulb on the Honda Civic spec d lights? Can't find it.
Hey what is the Eyebrow LED bulb size for 2LHP-CV01JM-TM lights, I want to replace the bulb.
What kind of halo bulbs are used for the 2003 grand am?
i have a ranger and i cant seem to find how to replace the halo bulbs i have had it less the 3 months and this the second time they have burned out
can you change the color of the halos by putting a colored bulb in?
how do you change the halo if it is CCFL and not LED? or can you not
2LHP-MST99JM-TM - halo burnt out. Bulbs do not look replaceable. Anything I can do to repair this or do I need to replace the bulb?
I do not know how to do that, i bought the lights from you guys and every time i connect the lights even to the battery terminals they spark whenever i do, don't know what is causing this problem
My spec ds have a box with 2 wires hanging out of it where dobi slice these wires in to turn onvhalos?
here i go again, i know you can answer this, the CCFL are on the halos are not working on rainy days.. or shall i say, when it rained then you switch on the CCFLs, they flicker. but when the engine heated the engine compartment and the headlights, the CCFL works... what is the cause of that??
Got Halo spec D's for my celica but I want to put 4001k hid bulbs in for the low beams but I don't know what type of bulbs will fit (ex. H1,h3) someone help
Hey guy's I just replaced the bulbs today and they usually use h1 bulbs for low and high beam for the Spec D setup, you also can find bulb at your local auto part store, which I found mines at Auto Zone. Just follow video above to take old bulb out mine was hard to pull out so I used a flat head screw driver and lifted it up where the little slit opening is but when I use replacement it went in perfect with no hesitation. Also check your fuses for low and high beam in your vehicle which was also blown too in mines. hopes this helps everyone.
Couldn't find what size the headlight bulbs were to save my life. Thanks man!
thanks man!
Do you know what size the halo bulbs are??
Can I put hid on my projectors model # 2LHP-ACD03G-TM
I have projector halo headlight honda accord 02 like the video, my halo light bulb is burned and been looking but can not find, I don't know what kind or the name
Check again to make sure the wires are really all correct and after that see if the bulbs are still seeded in correctly and or burnt out. If you need replacement bulbs please give our customer service team a call they will be happy to help you out!
Can I change my low beam an high beam light to the bulb light that's blue?
Can I use anything else to pull the bulb out. I have a 07 Scion tC . After I took the locking pin out, I try pulling it, it doesn’t come off easy
nah man these headlights were great for like the first year but now I literally have to replace my low beams on each side atleast once every 3 months sometimes it blows them within a month and the bulbs always go in easy but seem to get stuck in the housing somehow every single time it's a pain in the @ss to pull the burnt bulb out. I'm usually able to get my small hands in there with some small pliers and pull the bulb out without removing any parts but sometimes they are so stuck that the pliers break the back of the bulbs where they plug in then I usually have no choice but to pop half of the bumper off to lower it some to get to the side bolt for the headlight mount (I left the front bolt on the mount off since it's more work to get to just because of this reason) and then use pliers again to pull the broken bulb out. Then the new one goes in easy like it should be and works for a month or few then its blown again. Been replacing headlight bulbs cutting my hands up everytime every few months for the past 2 years I'm so sick of dealing with these crappy housings. They look amazing of course even though mine somehow got scratched the hell up somehow when they were super clear for the first year. Now also my right side halos started flickering and strobing for some reason while my left side halos stay on no issue. Overall great for about a year then its constant issues.
After pressing back on the locking pin I tried removing the bulb and it won't budge, I have an 05 Honda Accord. Is there anything different I have to do to replace that bulb. The description on this video starts at about 3:00.
*Update: I got it out I had to use a flat head screw driver to leverage it out.
I thought I was the only one for a second. Thanks for the screwdriver idea.
nah man these headlights were great for like the first year but now I literally have to replace my low beams on each side atleast once every 3 months sometimes it blows them within a month and the bulbs always go in easy but seem to get stuck in the housing somehow every single time it's a pain in the @ss to pull the burnt bulb out. I'm usually able to get my small hands in there with some small pliers and pull the bulb out without removing any parts but sometimes they are so stuck that the pliers break the back of the bulbs where they plug in then I usually have no choice but to pop half of the bumper off to lower it some to get to the side bolt for the headlight mount (I left the front bolt on the mount off since it's more work to get to just because of this reason) and then use pliers again to pull the broken bulb out. Then the new one goes in easy like it should be and works for a month or few then its blown again. Been replacing headlight bulbs cutting my hands up everytime every few months for the past 2 years I'm so sick of dealing with these crappy housings. They look amazing of course even though mine somehow got scratched the hell up somehow when they were super clear for the first year. Now also my right side halos started flickering and strobing for some reason while my left side halos stay on no issue. Overall great for about a year then its constant issues.
Glad I came across your comment. I did your flat screw maneuver and it was surprisingly easy. I was using pliers at first with a "destroy" mantra cause it seems like the bulb is sealed and I kept on cursing. Walked away from the car to do research and glad to see your post. Pat yourself on your back for me. Spec D should make a video on how to pop put hard to move bulbs for after market support for customers.
Anyone know what size are these H1’s? Both of my low beams are blown
How can I upgrade these bulbs to a better quality ones? Also having this issue of bulb not coming out of the housing. I want to upgrade to LEDS but I was told I couldn't by an autoshop, I really don't HIDS in my 05 Armada, just some regular plu and play LEDS. Any suggestions, I've been driving with my high beams for a long time now because the bulbs inside these lenses really suck, low beams lasted only about 2 months after I installed these headlights.
Return if you still can there is no fix and never will be one besides replacing these cheap headlights
these headlights were great for like the first year but now I literally have to replace my low beams on each side atleast once every 3 months sometimes it blows them within a month and the bulbs always go in easy but seem to get stuck in the housing somehow every single time it's a pain in the @ss to pull the burnt bulb out. I'm usually able to get my small hands in there with some small pliers and pull the bulb out without removing any parts but sometimes they are so stuck that the pliers break the back of the bulbs where they plug in then I usually have no choice but to pop half of the bumper off to lower it some to get to the side bolt for the headlight mount (I left the front bolt on the mount off since it's more work to get to just because of this reason) and then use pliers again to pull the broken bulb out. Then the new one goes in easy like it should be and works for a month or few then its blown again. Been replacing headlight bulbs cutting my hands up everytime every few months for the past 2 years I'm so sick of dealing with these crappy housings. They look amazing of course even though mine somehow got scratched the hell up somehow when they were super clear for the first year. Now also my right side halos started flickering and strobing for some reason while my left side halos stay on no issue. Overall great for about a year then its constant issues.
@@dustinsaltzman
I bought them over a year ago my brother I think I m just going to take the L and maybe get another brand, they look great but really not worth the hassle of constantly changing these bulbs, I don't want to install HIDS because if one of the ballast goes out it will be more money to replace it, I just need some LEDS bulbs, I may just change the housings next year, there are a few brands out there that look great and are equipped with regular bulbs.
Thanks for answering and sorry about your issues, it looks like we are in the same boat.
@@rayochapin Thanks for your reply also, after realizing my right side low beam was burned out tonight again after replacing it just last month I just had to come see if everyone else was having the same exact issue with the bulbs burning out quickly and getting stuck like mine were and of course pretty much everyone has the same issue. But yeah mine are long passed any warranty and I've accepted it as an L too so atleast I'm not the only one lol. Yeah I thought of the LED bulb being a fix since they don't or rarely blow but if I remember correctly I've tried going that route to find that the built on ballasts on the back of any LED bulb just would never be able to fit correctly with the metal clip to lock the bulb in place or be covered or protected from the rubber weather cap on the back covering the wires to the bulb. (Seen some had a plastic cup in some videos idk if they tried to redesign when they realized but I'm sure it didn't fix the problem) so yeah I'm at the same conclusion where the honest best answer is to just buy a different brand of headlights to replace them with which I'll eventually do when I find a decent kind. Luckily I have a connection to get the bulbs insanely cheap so I haven't spent 100s of dollars replacing these bulbs every other month thankfully. But appreciate your response I just had to vent about it tonight I felt ha. Hope you find something better brother or a fix for now if anything. Good luck!
@@dustinsaltzman
I totally understand the frustration my bro, I mean, who ever designed these housing were well aware of how much of a pain in the ass is to change these bulbs so why not design something less troublesome? I didn't want to deal with it so took the vehicle to an auto shop where they told me that they would install a set of HIDS for 200 bucks or more depending on the time it would take to get it done, knowing how these places work I figure by the time they gave me my car back that I was going to get slapped with a 250 dollar bill so I decided to pass and and will just replace the housing with something a little more convenient, regarding your bulbs, it sucks that they only lasted a month, it sucks. Alright my bro, it is very late here in Seattle and I have to get up in about 3 hours. Good day to you and good luck.
Please watch the video on how to install Halos and LED. It would show you step by step
What bulbs do I use for the g35 spec d lights
where can I buy replacement led's for the 3 led bulbs(2001 mustang)? What is the bulb model number?
The halo ring went out on my 95 f150 where can I get the bulb?