Cool track! Gotta get myself a td3, i love the acid vibes and as well as my volca nubass sounds, it doesn't get as acidy as the og and army of Behringer clones 😂
thanks for watching🙏😊, all synths are midi synced, in one scheme) unfortunately it is difficult to write the whole process here, I found a lot of videos on this topic and made them)
@@philippzholobov well, i'm mostly concerned about the signal chain. my guess is you're using the circuit tracks to midi control the crave/td3, and also using circuit tracks for percusions, then taking everything to a mixer? i'm a bit confused by the ammount of cables. do you have any socials? i've been working with maschine and some pedals, my plan is to add creave/td3 also to my setup, would be interesting to share stuff
@@bonniebsod The circuit tracks have two mono channels for external instruments, the mixer is also in it. It sends a stereo signal to the sound card. I have instagram philiiiiipp, there is also telegram, vk.
To be honest, there seem to be a huge number of them on the Internet that are freely available, there is a program called clip grab, you can cut any sound from RUclips
bro.....that sounds dope. I just ordered a used TB-03 but going to buy the Crave & TD-3 as I think they are a better sounding combo. This sound killer. Just out curiosity, why did you you get the TD-3 MO? Do you think it sounds better? Appreciate the advice.
well, you have a sequencer of 16 steps and 8 tracks, you can set a sample or midi signal on any of these steps. So I took it and put a double kick there) could I tell you more if you asked a more specific question? it's not hard for me, so don't be shy
@@gregnaxx7895 the bass part is played by Crave, it is registered on the Circuit sequencer, the signal is transmitted via MIDI, Instructions for the Circuit can be downloaded from the Novation website
![[Eng Sub] NOVATION CIRCUIT TRACKS standalone groovepad and midi controller](http://i.ytimg.com/vi/YIpeM-0ak30/mqdefault.jpg)
thisis my dreamed setup ! straightforward and do its job
Love it, shows how much can be done with so little
thank you 🙏, glad you liked it
Love the tempo and that evil sound
Thank you 🙏
Super cool nice man
Thank you man 🙏
This is really good - thx for the motivation
Thanks 🙏😊 glad you like it
great mate
thanks dude, glad you like it!
This is good. 3 pieces of gear that I also own.
Thanks 🙏
Well done 👏 ✔ 👍 👌
thanks a lot bro, for your support🙏
This was a good one!
thank you bro, I am pleased🙏😊
Cool track! Gotta get myself a td3, i love the acid vibes and as well as my volca nubass sounds, it doesn't get as acidy as the og and army of Behringer clones 😂
thank you friend! It seems to me that Korg has a rather interesting sound)
Damn nice
Thanks bro 🙏😊
Искренне кайфанула)
От души рад что тебе понравилось) в живую звучит еще лучше😉
Great video, can the Crave and TD 3 be synced together, if so how? Sorry I'm a bit of a newcomer to synths.
thanks for watching🙏😊, all synths are midi synced, in one scheme) unfortunately it is difficult to write the whole process here, I found a lot of videos on this topic and made them)
Cool socks
Thank you 😁
Killer track (like and sub) ☢☣🔥🔥
Thanks 🙏 😊
My dear sir, this is amazing, would you take the time to do a short explanation / or tutorial? thank you
hi friend, glad you like it. I have time, ask what is interesting, I will answer any question 🙌
@@philippzholobov well, i'm mostly concerned about the signal chain. my guess is you're using the circuit tracks to midi control the crave/td3, and also using circuit tracks for percusions, then taking everything to a mixer?
i'm a bit confused by the ammount of cables.
do you have any socials? i've been working with maschine and some pedals, my plan is to add creave/td3 also to my setup, would be interesting to share stuff
@@bonniebsod The circuit tracks have two mono channels for external instruments, the mixer is also in it. It sends a stereo signal to the sound card. I have instagram philiiiiipp, there is also telegram, vk.
Where do you find the subdued vocal part - looking for vocal samples but not those cheesy female "oooh i feel the music" cuts
To be honest, there seem to be a huge number of them on the Internet that are freely available, there is a program called clip grab, you can cut any sound from RUclips
bro.....that sounds dope. I just ordered a used TB-03 but going to buy the Crave & TD-3 as I think they are a better sounding combo. This sound killer. Just out curiosity, why did you you get the TD-3 MO? Do you think it sounds better? Appreciate the advice.
thank you friend, it's just such a yellow color. I don't think the sound is different)
Well. MO is another model based on modded 303 (devilfish). Can sound very harsh. AM is just the color.
What leads do you use to connect everything together,
MIDI wires for transmitting notes and audio jacks 6.3 for transmitting audio
how do you do the double kick thing at 1:34 ?
well, you have a sequencer of 16 steps and 8 tracks, you can set a sample or midi signal on any of these steps. So I took it and put a double kick there) could I tell you more if you asked a more specific question? it's not hard for me, so don't be shy
How you connet crave..? To NC?
To circuit traks? From midi channel)
I understand your question in Traks there are two audio inputs
dope
Thanks bro🙏
Ho You make bass line ?
writing notes on the sequencer, or what exactly do you want to know?
@@philippzholobov the bass line came from Novation? Kick and bass ? Have you some tutorial?
@@gregnaxx7895 the bass part is played by Crave, it is registered on the Circuit sequencer, the signal is transmitted via MIDI, Instructions for the Circuit can be downloaded from the Novation website
no tweaking on a modular synth? is this playing?
it only has bass on the crave
Work a bit on your timings. Otherwise great work!
Thanks, i will do my best 🙏😇
Не хватает разнообразия в треке
Да, было бы здорово разнообразить) Буду рад любым идеям и советам) Благорарю за просмотр и комментарий!🙏😊