I just started this today. I'm so committed that I haven't stopped yet. I got it for my mother's birthday. If it wasn't for this video, I would've been stuck fixing my mistakes for weeks. Thanks for the video.❤❤
Hi! Im watching your video it’s so helpful! I’m from thailand sorry for my poor english tho but at 36:45 I try to connect them together but when they’re connected they can’t play 😢 can you help me because both of them can play when they’re not connected idk what to do now 😭
If the music box pieces can play individually but not when connected, it might be an issue with alignment or the tightness of the connection. Here are a few things to check: Check the Alignment:Make sure the gears are perfectly aligned and turning smoothly. If they’re slightly misaligned, they might block each other from moving. Avoid Over-Tightening:If the pieces are too tightly connected, it can cause unnecessary friction, preventing the music box from playing. Try loosening the connection just a bit to see if that helps.Lubricate the Gears:Use a tiny bit of wax or a pencil (graphite) on the gear teeth to reduce friction.Inspect for Obstructions:Look for anything blocking the movement of the gears or components. Even a tiny misplaced piece can stop the mechanism from working.Reassemble Slowly:Disconnect the pieces and reconnect them carefully, step by step, making sure each part moves freely before attaching the next. If you’re still stuck, feel free to let me know, and I’ll try to help further! Don’t give up-you’re doing great! 🌟😊
This video is so helpful!! I’m wondering if you have any advice at 20:05 for some reason my gear with F6 is lower than the gear with F7 and won’t connect! I’m trying to figure out why! I’ve taken it apart to see if something isn’t snapped in correctly but I still can’t figure it out!
Check the Axle Placement: Ensure that the axle holding the gear with F6 is fully inserted and level. Sometimes, a slight tilt can cause the gears to misalign. Verify the Spacer: Look for any spacer or washer pieces in the assembly steps around F6. Missing or mispositioned spacers can affect the gear height. Tighten Connections: Recheck the connections around F6 and F7 to make sure all parts are snapped in securely and evenly. Inspect for Obstructions: Look for any excess material, debris, or small imperfections in the gear slots that could prevent proper placement. Shim Adjustment: If everything looks correct but the height still seems off, consider using a thin piece of cardboard or similar material as a shim under F6 to raise it slightly.
Thank you for such a detailed instructional video where I had to use slower speed for the video to help follow and complete step by step. Thanks to you I got to finish this piece on time to gift to my fiancé! 🙌🙌
You're very welcome! I'm thrilled to hear that the instructional video was helpful for you.Crafting something with your own hands and gifting it adds a special touch, and I'm sure your fiancé will appreciate the thought and effort you put into creating such a meaningful and personalized gift.
Confirm that the keyboard piece is correctly aligned with the rest of the piano. Check the assembly instructions to make sure you haven't missed any specific alignment details.Look for any parts of the puzzle that might be obstructing the movement of the gears. Make sure there are no misaligned or overlapping components preventing the gears from turning freely.Verify that the gears are correctly positioned and meshing with each other as intended. If there are washers, make sure they are placed in the right locations to facilitate smooth gear rotation.Inspect the teeth of the gears to ensure they are not damaged or misshapen. If any teeth are problematic, it may impact the movement of the gears.Check that the keyboard piece is securely engaged with the gears. If there is a specific locking mechanism or attachment point, make sure it's properly connected.
That's such a thoughtful gift from your husband! 💕 It’s all about the journey and enjoying the process, not just the final result. Every piece you put together is a little victory, and the more you work on it, the better you’ll get. Keep at it-you’ve got this! 😊 If you ever need tips or encouragement, I’m here for you! ✨
I'm on step 5. Attched instructions only help so much. Thanks to this video my piano is coming along. (It's taking a lot longer than the 47 minutes shown on this video.)
Awesome tutorial, @39:20, im having trouble keeping the sides of the piano to stay in place. what do you recommend, I fixed the other pieces, sand and waxed, but its not staying in place, Im considering using glue, but I dont wanna do that.
Double-check the fit: Ensure all tabs and slots are aligned correctly, as even a small misalignment can cause stability issues. Tighten the joints: If the fit feels loose, consider gently sanding the tabs for a snug fit or lightly pressing the slots with pliers to secure the parts. Temporary hold: Instead of glue, try using small rubber bands or clamps to hold the pieces in place while you assemble the rest of the piano.
Just looking at this video shows u that it’s waaaay advanced..I only have one kit under my belt and it was not this detailed… my goal is to conquer this one!! 🤍
Hi, I love this kit. This is my second one. I received the cello for Christmas and loved it so treated myself to the piano. I've reached the point where i fix F1 to the piano gear section and I'm having problems as the gears seems to be catching and not turning. I've disassembled it multiple times but with the same outcome. Can someone please advise as I really want to finish this.
Ensure that all the gears are properly aligned and meshing correctly. Even a slight misalignment can cause the gears to catch. Make sure that each gear tooth is properly engaged with the adjacent gear.Examine the gear teeth for any burrs, excess glue, or other obstructions. If you find any irregularities, use a small file or sandpaper to smooth out the edges. Be cautious not to remove too much material.Confirm that all parts are correctly oriented and installed according to the instructions. Sometimes, a simple mistake in part orientation can cause issues.Examine the entire assembly to ensure that no foreign objects or debris are interfering with the gears. Even a tiny piece of excess material can cause problems.Test each gear and component separately to identify if a specific part is causing the issue. This can help isolate the problem and guide your troubleshooting efforts.
33:55 how much do you sand it?! 😭 I think I messed up… at first it’s not working. I sand it it’s not working. I sand it again and it’s still not working.
Be careful not to over-sand, as it might make the connection too loose. If you think you might have sanded too much, you can use a bit of glue to secure the pieces in place.
Hi! Nice baroque music and good video! Wanna ask like I forget to put a gadget shown at 19:22 and insert the shaft sleeve on it like 19:50. Is there any way to loosen the shaft sleeve and dismantle the gear?I mean the step is so crucial as it affects the keyboard
Certainly, if you've forgotten to include a crucial gadget at a specific step and need to insert the shaft sleeve, you may need to dismantle the gear mechanism to make the necessary adjustments. Here's how you can approach this situation: Identify the Gear and Gadget: Review the footage or instructions to identify the gear that needs adjustment and the gadget that should be inserted. Gently Dismantle the Gear Mechanism: Start by carefully disassembling the surrounding components of the gear you need to adjust. If there are screws, bolts, or other fasteners holding the gears together, carefully remove them. Keep track of the parts as you disassemble. Loosen the Shaft Sleeve: Once you've exposed the area where the shaft sleeve needs to be inserted, loosen any fasteners or mechanisms holding it in place. Be gentle during this process to avoid damaging the gears or other components. Insert the Gadget and Shaft Sleeve: Place the forgotten gadget in its designated location. Insert the shaft sleeve in the correct position. Ensure it aligns properly with the gears.
Ive gotten to 28:34 but im not sure what to do... My cogs all connect, but the big brown one on the top isnt aligned with the new smaller ones... It is slightly off, enough to cause issues with the turning at times, presumably causing bigger issues down the line. The big brown cog is a bit rickety aswell, i noticed the difference earlier when i saw yours at the beginning of step 4 looking much better than mine, but i couldnt figure out how to fix it and now im confused if i should keep going or go backwards
Hi there! Thanks for reaching out! It sounds like the big brown cog isn’t fully aligned with the smaller ones, and that could definitely cause some issues. Here’s what I recommend: Check Alignment: The large brown cog needs to be properly aligned with the smaller ones for smooth turning. If it’s slightly off, you may need to loosen it and carefully readjust its position. Ensure it's centered and aligned with the new smaller gears before tightening again. Inspect for Wobble: If the big brown cog is rickety, it may not be seated properly on the shaft. Double-check that it’s securely attached and that there’s no excess play or wobble. If needed, you can remove it and carefully reinstall it, making sure it sits flush and tight. Review Step 4: You mentioned the difference between yours and mine at Step 4-this step is crucial for the proper alignment of the gears. I’d suggest revisiting that part of the assembly and ensuring everything lines up as it should. Go Back if Needed: If things still don’t seem right, don’t hesitate to go back a few steps to see if anything was missed. Fixing these issues early on will prevent bigger problems later in the build. Take your time with it! I know it can be frustrating, but getting the gears to turn smoothly is key for the whole project. Feel free to let me know how it goes or if you need more help. You’ve got this!
Just got mine in the mail. I plan to only watch this video if I get stuck somewhere while following directions. Will add a review after i am done. 12/28/2023.
That sounds like a good plan! Watching instructional videos can be very helpful, especially when you encounter a challenging step or need clarification during the assembly process. It's great that you're prepared to use the video as a resource while following the directions.Feel free to reach out if you have any specific questions or encounter difficulties during the assembly. Additionally, adding a review after you've completed the project is a fantastic way to share your experience and insights with others who may be considering the same kit. Your feedback could be valuable to those embarking on a similar crafting journey. Happy crafting, and I hope your assembly process goes smoothly! If you ever need assistance or have questions, don't hesitate to ask.
Sorry to hear that piece gave you trouble! Sometimes the fit can be really tight. I recommend sanding the edges slightly to make it easier to insert, but don’t force it. If it’s already broken, you can try gluing it back together with a strong adhesive like wood glue or cyanoacrylate (super glue). If you’re unable to fix it, reaching out to the kit manufacturer for a replacement part might be the best option. Hope this helps!
For a beginner, I recommend starting with a basic wooden puzzle that has a straightforward design and clear instructions. Look for puzzles that involve fewer pieces and have a simpler assembly process. This will help you get accustomed to working with wood and understanding how pieces fit together.Consider starting with a 3D wooden puzzle that forms a recognizable shape, such as an animal or geometric figure. These puzzles often have interlocking pieces that are relatively easy to assemble and provide a sense of accomplishment when completed. Additionally, make sure to gather the necessary tools and materials, such as sandpaper, wood glue, and clamps, to help you with the construction process. As you gain confidence and skills, you can gradually move on to more complex wooden puzzles.Remember to follow safety guidelines and wear appropriate protective gear, such as safety glasses, while working with wood and tools. Enjoy the process of learning and creating your wooden puzzle! For me, the most important thing is "Patience"! So take your time and enjoy!
does anyone know how you are supposed to wax G1 on Step 2? (like only between the little nobs odr the upper/under side....?) hoped to see it in the video but i guess it was skipped
Great question! For Step 2 when waxing G1, you should focus on applying wax specifically to the areas where the parts will have friction during movement. This usually means between the little knobs and any surfaces that come into contact with other pieces. Waxing these areas ensures smooth operation. I apologize if this step was skipped in the video.
Amazon - They have a wide selection of winders in different sizes and styles, from single-watch winders to large cases eBay - Another good option for buying both new and used winders, often at competitive prices.
Gracias por el vídeo segui los pasos y todo funcionó muy bien pero ahora al cabo de unos dias los engranajes no giran..... Tal vez se seco la cera blanca ? Hay algun producto mejor para aplicar y que giren sin problema?
Hola! Gracias por tu comentario y por seguir los pasos del vídeo. Me alegra saber que todo funcionó bien al principio. Es posible que la cera blanca se haya secado o que haya acumulación de polvo que esté impidiendo el movimiento suave de los engranajes. Para mantener los engranajes funcionando sin problemas, te recomiendo los siguientes productos: Lubricante de silicona: Este tipo de lubricante es ideal para piezas plásticas y de madera, ya que no se seca y proporciona una capa duradera de lubricación. Grasa de litio: Es otro excelente lubricante para engranajes, ya que es resistente y no se seca rápidamente. Asegúrate de aplicar una pequeña cantidad para evitar acumulación de residuos. Polvo de grafito: Este es un lubricante seco que funciona muy bien para mecanismos delicados. No atrae polvo y proporciona una lubricación duradera. Asegúrate de limpiar los engranajes antes de aplicar cualquier nuevo lubricante para evitar la mezcla de productos. Espero que estas sugerencias te ayuden a resolver el problema. Si tienes alguna otra pregunta o necesitas más ayuda, no dudes en preguntar. Gracias de nuevo por tu apoyo y feliz construcción!
Hi your video has been a great help to me, but I'm wondering why my music doesn't play all the way through even if I wind it up alot. It plays a bit and then stops.
¡Hola! 😊 No te preocupes, vamos a intentar solucionarlo juntos. Si la maquinita de la caja de música no funciona, aquí tienes algunos pasos para revisar: 1. Verifica el mecanismo: Gira la manivela suavemente: Asegúrate de que el mecanismo principal no esté atascado. Busca obstrucciones: Comprueba si alguna pieza está bloqueando los engranajes o el cilindro de la música. 2. Alineación de las piezas: Si acabas de montarlo, verifica que todas las piezas están correctamente alineadas. A veces, un engranaje desajustado puede impedir que funcione. 3. Lubrica el mecanismo: Aplica una pequeña cantidad de grafito (puedes usar un lápiz) en los engranajes para que se muevan más fácilmente. 4. Ajusta la tensión: Si las piezas están demasiado apretadas o forzadas, afloja ligeramente las conexiones para reducir la fricción. 5. Prueba sin ensamblar: Retira el mecanismo de la caja para probarlo de forma individual. Si funciona fuera de la caja, entonces puede que el problema esté en cómo se conectó al resto del diseño. Si después de esto sigue sin funcionar, avísame y podemos buscar más soluciones. ¡No te rindas, seguro que lo solucionas! 💪🎶
My boyfriend got this for me for my birthday and I’m having a BLAST, I was a bit confused with the steel rods and how to set all of that up, this video was really helpful!! Thank you
2个月前 Confirm that the keyboard piece is correctly aligned with the rest of the piano. Check the assembly instructions to make sure you haven't missed any specific alignment details.Look for any parts of the puzzle that might be obstructing the movement of the gears. Make sure there are no misaligned or overlapping components preventing the gears from turning freely.Verify that the gears are correctly positioned and meshing with each other as intended. If there are washers, make sure they are placed in the right locations to facilitate smooth gear rotation.Inspect the teeth of the gears to ensure they are not damaged or misshapen. If any teeth are problematic, it may impact the movement of the gears.Check that the keyboard piece is securely engaged with the gears. If there is a specific locking mechanism or attachment point, make sure it's properly connected.
It’s just when I have to put that board on top of wear the gear is it makes it tighter. Which makes I not work properly so I don’t know how else to fix it I even put wax on the turning parts that rubs against the wood it still tight. But thanks for the tips 😁
Sand or Trim: Check if there are any areas where the turning parts are rubbing against the wood excessively. You can use sandpaper to gently sand down these areas or a small saw or file to trim any protruding parts slightly. Be careful not to remove too much material, as this could affect the functionality of the music box.Lubrication: In addition to wax, consider using a silicone-based lubricant or graphite powder on the turning parts and the areas where they come into contact with the wood. These lubricants can help reduce friction and make the movement smoother.Adjustment: Look for any screws or bolts that can be adjusted to fine-tune the tension of the turning parts. Loosening or tightening these screws slightly may help alleviate the tightness and ensure proper movement.Padding: If the board is causing the turning parts to become tighter, try adding a thin layer of padding between the board and the mechanism. This could be a piece of felt or foam to cushion the contact points and reduce friction.Check Alignment: Make sure that all the parts of the music box are properly aligned and assembled according to the instructions. Misalignment can cause parts to rub against each other, leading to tightness and difficulty in operation.By implementing these suggestions, you should be able to improve the functionality of your magic piano music box and enjoy smooth operation without any tightness or sticking. Good luck!
I have just received this. Opened the box but couldn’t find the wax. Could you tell me where the wax is located in the box? I enjoyed watching the video.
Make sure to carefully check all the sheets for the piece labeled "G1"-the letters and numbers are usually etched near the edges of each piece. If you're unable to find it, double-check the packaging and the instruction booklet to ensure you didn't miss it. Sometimes pieces can be grouped closely together, making them a bit harder to spot.
Wonderfully detailed video. Using it to put together this exact Rokr Magic Music Box puzzle, my first 3D puzzle. I'm using this video instead of reading the instructions, as it is so detailed to even show the part numbers. Very well done and excellent video practices; sharp and concise. There is an assembly part in your video that was missing (as I was assembling as I watched then would pause and or rewind}. At about the 27 minute mark of the video, the assembly of the legs and the under part of the piano assembly was missing and was a bit confusing to try to figure out, exactly what the parts were and how to assemble them.
So glad that you like the video. You are legend! There was a tiny mistake at the 27 minute mark of the video I made, I put the B5 part upside down! And I correct it later. That is why the legs part is missing.I apologize for the confusion and inconvenience you've experienced with building the Piano.
I’m doing this right now but have run into a problem. I’ve got all of the gears engaging but when I put on F1 they don’t. And suggestions? I’d really appreciate any help you can give me.
When you install part F1 and notice that the gears stop working properly, it could be an issue related to alignment or excessive friction. Here are a few steps you can take to troubleshoot and hopefully resolve the issue:Check Alignment: Make sure that F1 is aligned correctly as per the instructions. Even a small misalignment can cause the gears to bind. Ensure that all parts fit snugly and correctly without forcing them into place.Examine for Obstructions: Double-check that no debris or residual material is causing the gears to stick. Sometimes, small particles can get lodged in the gear teeth, causing them to jam.Loosen Connections: Sometimes, tightening screws or connections too much can put extra pressure on the gears. Try loosening any nearby connections slightly to see if that allows the gears to move more freely.Revisit Previous Steps: Occasionally, the issue might not be with F1 itself but with how previous parts were assembled. Briefly backtrack through your steps to ensure everything prior to F1 was assembled correctly and functioning as expected before F1 was added.I hope these suggestions help you get back on track with your ROKR Magic Piano kit! Let me know how it goes, or if there’s anything else you might need.
I need your help. I’m on the step where I put F1 on. Gears work great but when I put F1 on, they don’t work. I’ve tried everything. Hope to hear from you.
Phenomenal video! I came to it because all my gears work fine and smoothly but my keys aren’t moving. They stay “pressed down” instead of moving up and down
Ensure that there are no foreign objects, debris, or obstructions blocking the movement of the keys. Sometimes, small items can get lodged between the keys, preventing them from moving freely.Examine the mechanism under the keys. Look for any broken or disconnected parts.Check if any of the keys are warped or bent. Warped keys can interfere with the smooth movement of adjacent keys. If you find any warped keys, you may need to replace them.Ensure that all parts of the piano are assembled correctly. Check the assembly instructions and make sure that every component is in its proper place. Check the manual and the most important thing is patience.
It's great and helpful. But I’ve almost finished step ten and after assembling the two big parts (the part with the keyboard and the one with the two big books), I have noticed that all of my gears don't turn anymore while it was working properly before putting them together. I don’t know what's going wrong. (Sorry for my English)
Taking a systematic approach to troubleshooting can help you identify and address the issue causing the gears to stop turning. Be patient, and carefully go through each step to ensure a smooth and functional assembly.
You will need a small electric motor that can fit within the existing structure without requiring extensive modifications. A common choice might be a small DC motor. Since you mentioned wanting to connect it to a USB cable, you’ll need a USB power supply that matches the motor's voltage requirements. Most USB outputs are 5V, which should generally be suitable for small DC motors used in hobby projects.Secure the motor in place where the manual crank used to be. You might need to create custom mounts using materials like plastic or lightweight metal. 3D printing could be very useful here if you have access to a 3D printer.You may need to adapt or replace the gearing to connect the motor's output shaft to the piano's mechanism. This might involve using gears or belts.Depending on the motor's speed, you may need to add a gear reduction between the motor and the mechanism or use electronic speed control to ensure the piano plays at a realistic speed.Connect the motor to the USB power source through appropriate wiring. Ensure you have a switch to turn the motor on and off.Depending on your motor and power source, you might need a basic circuit to control the power and protect the motor. Components like a resistor or a basic motor driver circuit can be necessary.
The main part of the piano works fine when not attacked to the keyboard, but when i attach the keys it gets stuck and wont spin. Ive taken apart and redone the keyboard like 3 times. Do ypu have any suggestions on how to fix this?
It sounds like you're experiencing some technical difficulties with your ROKR magic piano music box kit. Here are a few troubleshooting steps you can try to fix the issue: Check for Misalignment: Make sure that the keys of the keyboard are properly aligned with the mechanism of the main part of the piano. Even a slight misalignment can cause the keys to get stuck when attached. Ensure Proper Assembly: Double-check that each component of the keyboard is assembled correctly according to the instructions provided with the kit. Pay close attention to any interlocking parts or connections that may be causing friction.
Somehow all the gears are at different heights for me. And they arent level, meaning they dont touch and wont turn each other. I put the washers on so im really not sure what went wrong. Probably going to have to rebuild it.
@ginaartsgallery • 0秒钟前 Ensure that each gear is placed in its designated location according to the instructions. Confirm that the gears are correctly aligned and seated in their respective slots.Double-check the placement of washers. Make sure that the washers are positioned between the gears and the wooden surfaces to allow smooth rotation without friction.If you suspect an error in the assembly, consider disassembling the affected area and carefully reassembling it, paying close attention to the alignment of gears and the placement of washers. Following the assembly instructions step by step can help prevent misalignment.Look for any debris or wood splinters that might be obstructing the movement of gears. Clear any obstructions and ensure a clean and smooth interaction between gears.Inspect the teeth of the gears to ensure they are not damaged or misshapen. If you notice any irregularities, it might be necessary to replace the affected gear. Remember that don't be upset. Rebuild means double happiness!
I’m finding this so helpful!! I’m just coming on to step five and have noticed that all of my gears are turning properly except the biggest one with the gear at the top as well. I don’t know what I’ve done wrong tho 😭😭
Check if the teeth of the gears are properly aligned. Misalignment can cause gears to jam.Make sure the gears are properly seated on their axles or shafts.Inspect the gears for any debris or foreign objects that might be causing interference.Ensure that there is no excess glue or material.preventing smooth rotation.Confirm that the axles or shafts holding the gears are straight and properly aligned. Check if any part of the mechanism is bent or misaligned.Apply a small amount of wax to the contact points of the gears.Ensure there is not too much friction between the gears, which could impede movement.Verify that the gears are not too tight against each other. There should be a little bit of play to allow for smooth rotation.
Review the assembly manual carefully. Lay out all the screws and sort them by size. You can use a ruler or measuring tape to determine the length of each screw. Compare the sizes of the screws to the images or descriptions in the manual. This can help you match the screws to the correct step.
Help I cannot get my gears to align properly, I’ve been trying to fix it for like 20-50 mins but it doesn’t workkk 😭 Edit: I just figured it out and omg I feel so dumb, the second “floor” was supposed to go UNDER the notches, not OVER
You skipped over part 6 which has you flip the piece over to do the underside. That's what I needed to see but was able to figure it out. Can't tell you how incredibly disappointing it was to see that part cut out when everything else was so detailed.
The underside part is so easy to assemble. Wanna to save the length of the video otherwise the video will be too long. I will try my best to make sure all the details will be covered in my next video. Thank you for your advice!
The video wasn’t helpful enough to be honest there’s a lot of details was difficult to me and I don’t understand how to do it but anyway thank you so much. Amazing job.
Thank you for taking the time to watch the video and for sharing your feedback. I'm sorry to hear that you found some parts difficult to follow. Your input is valuable, and I'll take it into consideration to improve future tutorials. I'm glad you still found some value in the video, and I appreciate your kind words. If you have any specific questions or need further assistance, please don't hesitate to reach out. Thank you again for your support!
@@ginaartsgallery I want to thank you again and I appreciate your wonderful work. My problem is The main part of the piano works fine when not attacked to the keyboard, but when i attach the keys it gets stuck and wont spin. Ive taken apart and redone the keyboard To no avail Would you please explain to me exactly how to solve it?
I just started this today. I'm so committed that I haven't stopped yet. I got it for my mother's birthday. If it wasn't for this video, I would've been stuck fixing my mistakes for weeks. Thanks for the video.❤❤
Glad you like it!
You don’t know how thankful I was when I saw this video
Glad you found us! Thank you.
Hi! Im watching your video it’s so helpful! I’m from thailand sorry for my poor english tho but at 36:45 I try to connect them together but when they’re connected they can’t play 😢 can you help me because both of them can play when they’re not connected idk what to do now 😭
If the music box pieces can play individually but not when connected, it might be an issue with alignment or the tightness of the connection. Here are a few things to check:
Check the Alignment:Make sure the gears are perfectly aligned and turning smoothly. If they’re slightly misaligned, they might block each other from moving.
Avoid Over-Tightening:If the pieces are too tightly connected, it can cause unnecessary friction, preventing the music box from playing. Try loosening the connection just a bit to see if that helps.Lubricate the Gears:Use a tiny bit of wax or a pencil (graphite) on the gear teeth to reduce friction.Inspect for Obstructions:Look for anything blocking the movement of the gears or components. Even a tiny misplaced piece can stop the mechanism from working.Reassemble Slowly:Disconnect the pieces and reconnect them carefully, step by step, making sure each part moves freely before attaching the next.
If you’re still stuck, feel free to let me know, and I’ll try to help further! Don’t give up-you’re doing great! 🌟😊
This video is so helpful!! I’m wondering if you have any advice at 20:05 for some reason my gear with F6 is lower than the gear with F7 and won’t connect! I’m trying to figure out why! I’ve taken it apart to see if something isn’t snapped in correctly but I still can’t figure it out!
Check the Axle Placement: Ensure that the axle holding the gear with F6 is fully inserted and level. Sometimes, a slight tilt can cause the gears to misalign.
Verify the Spacer: Look for any spacer or washer pieces in the assembly steps around F6. Missing or mispositioned spacers can affect the gear height.
Tighten Connections: Recheck the connections around F6 and F7 to make sure all parts are snapped in securely and evenly.
Inspect for Obstructions: Look for any excess material, debris, or small imperfections in the gear slots that could prevent proper placement.
Shim Adjustment: If everything looks correct but the height still seems off, consider using a thin piece of cardboard or similar material as a shim under F6 to raise it slightly.
Thank you for such a detailed instructional video where I had to use slower speed for the video to help follow and complete step by step. Thanks to you I got to finish this piece on time to gift to my fiancé! 🙌🙌
You're very welcome! I'm thrilled to hear that the instructional video was helpful for you.Crafting something with your own hands and gifting it adds a special touch, and I'm sure your fiancé will appreciate the thought and effort you put into creating such a meaningful and personalized gift.
So what music does it play and can you get different music if you buy several?
i need help when connecting the keyboard to the rest of the piano the piece won’t stay and when i do get it on the gears won’t turn
35:20 - 36:09
Same, i can´t identify why the gears won´t turn when the two parts of he piano are together. Please if someone went through the same, help us :(
Confirm that the keyboard piece is correctly aligned with the rest of the piano. Check the assembly instructions to make sure you haven't missed any specific alignment details.Look for any parts of the puzzle that might be obstructing the movement of the gears. Make sure there are no misaligned or overlapping components preventing the gears from turning freely.Verify that the gears are correctly positioned and meshing with each other as intended. If there are washers, make sure they are placed in the right locations to facilitate smooth gear rotation.Inspect the teeth of the gears to ensure they are not damaged or misshapen. If any teeth are problematic, it may impact the movement of the gears.Check that the keyboard piece is securely engaged with the gears. If there is a specific locking mechanism or attachment point, make sure it's properly connected.
My husband bought this for Christmas . I'm at it most evenings I'm not very good at it. But I shall keep on till I've finished it.
That's such a thoughtful gift from your husband! 💕 It’s all about the journey and enjoying the process, not just the final result. Every piece you put together is a little victory, and the more you work on it, the better you’ll get. Keep at it-you’ve got this! 😊 If you ever need tips or encouragement, I’m here for you! ✨
I'm on step 5. Attched instructions only help so much. Thanks to this video my piano is coming along. (It's taking a lot longer than the 47 minutes shown on this video.)
thank you for sharing.
Very glad you like it.
Thank you
Can’t wait to see the gramophone build
merci merci- ce tuto m'a bien aidée car j'étais bloquée et n'arrive pas à installer certaines pièces- tuto très bien expliqué- encore merci😆
Absolutely beautiful 😍
Awesome tutorial, @39:20, im having trouble keeping the sides of the piano to stay in place. what do you recommend, I fixed the other pieces, sand and waxed, but its not staying in place, Im considering using glue, but I dont wanna do that.
Double-check the fit: Ensure all tabs and slots are aligned correctly, as even a small misalignment can cause stability issues.
Tighten the joints: If the fit feels loose, consider gently sanding the tabs for a snug fit or lightly pressing the slots with pliers to secure the parts.
Temporary hold: Instead of glue, try using small rubber bands or clamps to hold the pieces in place while you assemble the rest of the piano.
I've ordered this one, can't wait to start. It's going to sit on my piano. 😊
Lots of fun for sure. Hope you enjoy!
This shit was hard af
Just looking at this video shows u that it’s waaaay advanced..I only have one kit under my belt and it was not this detailed… my goal is to conquer this one!! 🤍
This one has me stuck on step 4 it’s stupid and won’t catch
Hi, I love this kit. This is my second one. I received the cello for Christmas and loved it so treated myself to the piano. I've reached the point where i fix F1 to the piano gear section and I'm having problems as the gears seems to be catching and not turning. I've disassembled it multiple times but with the same outcome. Can someone please advise as I really want to finish this.
Ensure that all the gears are properly aligned and meshing correctly. Even a slight misalignment can cause the gears to catch. Make sure that each gear tooth is properly engaged with the adjacent gear.Examine the gear teeth for any burrs, excess glue, or other obstructions. If you find any irregularities, use a small file or sandpaper to smooth out the edges. Be cautious not to remove too much material.Confirm that all parts are correctly oriented and installed according to the instructions. Sometimes, a simple mistake in part orientation can cause issues.Examine the entire assembly to ensure that no foreign objects or debris are interfering with the gears. Even a tiny piece of excess material can cause problems.Test each gear and component separately to identify if a specific part is causing the issue. This can help isolate the problem and guide your troubleshooting efforts.
@ginaartsgallery Thanks for this. It only happens when I attach piece F1. I have checked the gears alignment but will go through it again 😊
33:55 how much do you sand it?! 😭 I think I messed up… at first it’s not working. I sand it it’s not working. I sand it again and it’s still not working.
Be careful not to over-sand, as it might make the connection too loose. If you think you might have sanded too much, you can use a bit of glue to secure the pieces in place.
@@ginaartsgallery i already over sand it but it still works tho. thx to your help i manage to make it work. somehow...
I'm in Indonesia, now it is Two o'clock in the early morning, i'm waiting for your video...and finally...thank you so much...
Hahaha, Thank you for your patience！ Finger crossd that you can fix your piano.
I got stuck at step 3 with the p13 and steel shafts so thank you so much for this 😭
Hi! Nice baroque music and good video! Wanna ask like I forget to put a gadget shown at 19:22 and insert the shaft sleeve on it like 19:50. Is there any way to loosen the shaft sleeve and dismantle the gear?I mean the step is so crucial as it affects the keyboard
Certainly, if you've forgotten to include a crucial gadget at a specific step and need to insert the shaft sleeve, you may need to dismantle the gear mechanism to make the necessary adjustments. Here's how you can approach this situation:
Identify the Gear and Gadget:
Review the footage or instructions to identify the gear that needs adjustment and the gadget that should be inserted.
Gently Dismantle the Gear Mechanism:
Start by carefully disassembling the surrounding components of the gear you need to adjust.
If there are screws, bolts, or other fasteners holding the gears together, carefully remove them. Keep track of the parts as you disassemble.
Loosen the Shaft Sleeve:
Once you've exposed the area where the shaft sleeve needs to be inserted, loosen any fasteners or mechanisms holding it in place.
Be gentle during this process to avoid damaging the gears or other components.
Insert the Gadget and Shaft Sleeve:
Place the forgotten gadget in its designated location.
Insert the shaft sleeve in the correct position. Ensure it aligns properly with the gears.
Ive gotten to 28:34 but im not sure what to do... My cogs all connect, but the big brown one on the top isnt aligned with the new smaller ones... It is slightly off, enough to cause issues with the turning at times, presumably causing bigger issues down the line.
The big brown cog is a bit rickety aswell, i noticed the difference earlier when i saw yours at the beginning of step 4 looking much better than mine, but i couldnt figure out how to fix it and now im confused if i should keep going or go backwards
Hi there! Thanks for reaching out! It sounds like the big brown cog isn’t fully aligned with the smaller ones, and that could definitely cause some issues. Here’s what I recommend:
Check Alignment: The large brown cog needs to be properly aligned with the smaller ones for smooth turning. If it’s slightly off, you may need to loosen it and carefully readjust its position. Ensure it's centered and aligned with the new smaller gears before tightening again.
Inspect for Wobble: If the big brown cog is rickety, it may not be seated properly on the shaft. Double-check that it’s securely attached and that there’s no excess play or wobble. If needed, you can remove it and carefully reinstall it, making sure it sits flush and tight.
Review Step 4: You mentioned the difference between yours and mine at Step 4-this step is crucial for the proper alignment of the gears. I’d suggest revisiting that part of the assembly and ensuring everything lines up as it should.
Go Back if Needed: If things still don’t seem right, don’t hesitate to go back a few steps to see if anything was missed. Fixing these issues early on will prevent bigger problems later in the build.
Take your time with it! I know it can be frustrating, but getting the gears to turn smoothly is key for the whole project. Feel free to let me know how it goes or if you need more help. You’ve got this!
Just got mine in the mail. I plan to only watch this video if I get stuck somewhere while following directions. Will add a review after i am done. 12/28/2023.
That sounds like a good plan! Watching instructional videos can be very helpful, especially when you encounter a challenging step or need clarification during the assembly process. It's great that you're prepared to use the video as a resource while following the directions.Feel free to reach out if you have any specific questions or encounter difficulties during the assembly. Additionally, adding a review after you've completed the project is a fantastic way to share your experience and insights with others who may be considering the same kit. Your feedback could be valuable to those embarking on a similar crafting journey. Happy crafting, and I hope your assembly process goes smoothly! If you ever need assistance or have questions, don't hesitate to ask.
@@ginaartsgallery Thank you!! I will
so whats the review
Thank you so much for doing this very detailed and understandable video! It's so appreciated.
I am very pleased to know that you like my video. Thanks for your supporting!
Thanks for the video. Do u know how to make the gears turn smoother? Mine keeps stopping and won't play as smoothly as supposed to.
put some wax on the gears.
Thank u so much. It's working better now.
Hi! once I get to 10:04 my cogs won’t turn even though I’ve waxed them,what do I do?
Most of the reason why they won’t turn is the plastic nut is too tight.
@@ginaartsgallery Okay thank you!!!
40:11 when I tried to put this piece on, it did not fit no matter how hard I tried and it eventually broke. Any suggestions?
Sorry to hear that piece gave you trouble! Sometimes the fit can be really tight. I recommend sanding the edges slightly to make it easier to insert, but don’t force it. If it’s already broken, you can try gluing it back together with a strong adhesive like wood glue or cyanoacrylate (super glue). If you’re unable to fix it, reaching out to the kit manufacturer for a replacement part might be the best option. Hope this helps!
@ thank you, I’ll try this!
Ive never built a wooden puzzle before. Wluld you recommend this for a beginner?
For a beginner, I recommend starting with a basic wooden puzzle that has a straightforward design and clear instructions. Look for puzzles that involve fewer pieces and have a simpler assembly process. This will help you get accustomed to working with wood and understanding how pieces fit together.Consider starting with a 3D wooden puzzle that forms a recognizable shape, such as an animal or geometric figure. These puzzles often have interlocking pieces that are relatively easy to assemble and provide a sense of accomplishment when completed. Additionally, make sure to gather the necessary tools and materials, such as sandpaper, wood glue, and clamps, to help you with the construction process. As you gain confidence and skills, you can gradually move on to more complex wooden puzzles.Remember to follow safety guidelines and wear appropriate protective gear, such as safety glasses, while working with wood and tools. Enjoy the process of learning and creating your wooden puzzle! For me, the most important thing is "Patience"! So take your time and enjoy!
amazing video, how do you make these videos. They are very useful to me. thank you!
glad you like the video
does anyone know how you are supposed to wax G1 on Step 2? (like only between the little nobs odr the upper/under side....?)
hoped to see it in the video but i guess it was skipped
Great question! For Step 2 when waxing G1, you should focus on applying wax specifically to the areas where the parts will have friction during movement. This usually means between the little knobs and any surfaces that come into contact with other pieces. Waxing these areas ensures smooth operation. I apologize if this step was skipped in the video.
Do you know about the auto winding casing, I saw it at the supermarket and was wondering if you knew where to buy it?
Amazon - They have a wide selection of winders in different sizes and styles, from single-watch winders to large cases
eBay - Another good option for buying both new and used winders, often at competitive prices.
Gracias por el vídeo segui los pasos y todo funcionó muy bien pero ahora al cabo de unos dias los engranajes no giran..... Tal vez se seco la cera blanca ? Hay algun producto mejor para aplicar y que giren sin problema?
Hola! Gracias por tu comentario y por seguir los pasos del vídeo. Me alegra saber que todo funcionó bien al principio. Es posible que la cera blanca se haya secado o que haya acumulación de polvo que esté impidiendo el movimiento suave de los engranajes.
Para mantener los engranajes funcionando sin problemas, te recomiendo los siguientes productos:
Lubricante de silicona: Este tipo de lubricante es ideal para piezas plásticas y de madera, ya que no se seca y proporciona una capa duradera de lubricación.
Grasa de litio: Es otro excelente lubricante para engranajes, ya que es resistente y no se seca rápidamente. Asegúrate de aplicar una pequeña cantidad para evitar acumulación de residuos.
Polvo de grafito: Este es un lubricante seco que funciona muy bien para mecanismos delicados. No atrae polvo y proporciona una lubricación duradera.
Asegúrate de limpiar los engranajes antes de aplicar cualquier nuevo lubricante para evitar la mezcla de productos. Espero que estas sugerencias te ayuden a resolver el problema. Si tienes alguna otra pregunta o necesitas más ayuda, no dudes en preguntar.
Gracias de nuevo por tu apoyo y feliz construcción!
Hi your video has been a great help to me, but I'm wondering why my music doesn't play all the way through even if I wind it up alot. It plays a bit and then stops.
how do you have your camera position?
I typically position my camera directly above my workspace to give viewers a clear and detailed view of the process.
Mecesito ayuda, lo tengo medio montado, pero ahora no me funciona la maquinita de caja de musica, que puedo hacer?, gracias
¡Hola! 😊 No te preocupes, vamos a intentar solucionarlo juntos. Si la maquinita de la caja de música no funciona, aquí tienes algunos pasos para revisar:
1. Verifica el mecanismo:
Gira la manivela suavemente: Asegúrate de que el mecanismo principal no esté atascado.
Busca obstrucciones: Comprueba si alguna pieza está bloqueando los engranajes o el cilindro de la música.
2. Alineación de las piezas:
Si acabas de montarlo, verifica que todas las piezas están correctamente alineadas. A veces, un engranaje desajustado puede impedir que funcione.
3. Lubrica el mecanismo:
Aplica una pequeña cantidad de grafito (puedes usar un lápiz) en los engranajes para que se muevan más fácilmente.
4. Ajusta la tensión:
Si las piezas están demasiado apretadas o forzadas, afloja ligeramente las conexiones para reducir la fricción.
5. Prueba sin ensamblar:
Retira el mecanismo de la caja para probarlo de forma individual. Si funciona fuera de la caja, entonces puede que el problema esté en cómo se conectó al resto del diseño.
Si después de esto sigue sin funcionar, avísame y podemos buscar más soluciones. ¡No te rindas, seguro que lo solucionas! 💪🎶
Muchísimas gracias por tu respuesta, así lo haré, lo verificaré todo, mil gracias por tu ayuda, un saludo.@@ginaartsgallery
My boyfriend got this for me for my birthday and I’m having a BLAST, I was a bit confused with the steel rods and how to set all of that up, this video was really helpful!! Thank you
Glad to hear that you like it
Hi! Just going to start this with my daughter.... can you explain why do you wax the parts and what do you use to wax? is it a candle?? Thanks!!
Wax makes gears and parts working smoothly. You can use candle. It is easy to get.
Hello, I’m having trouble making the gears work properly when the piano keys play 37:22
2个月前
Confirm that the keyboard piece is correctly aligned with the rest of the piano. Check the assembly instructions to make sure you haven't missed any specific alignment details.Look for any parts of the puzzle that might be obstructing the movement of the gears. Make sure there are no misaligned or overlapping components preventing the gears from turning freely.Verify that the gears are correctly positioned and meshing with each other as intended. If there are washers, make sure they are placed in the right locations to facilitate smooth gear rotation.Inspect the teeth of the gears to ensure they are not damaged or misshapen. If any teeth are problematic, it may impact the movement of the gears.Check that the keyboard piece is securely engaged with the gears. If there is a specific locking mechanism or attachment point, make sure it's properly connected.
It’s just when I have to put that board on top of wear the gear is it makes it tighter. Which makes I not work properly so I don’t know how else to fix it I even put wax on the turning parts that rubs against the wood it still tight. But thanks for the tips 😁
Sand or Trim: Check if there are any areas where the turning parts are rubbing against the wood excessively. You can use sandpaper to gently sand down these areas or a small saw or file to trim any protruding parts slightly. Be careful not to remove too much material, as this could affect the functionality of the music box.Lubrication: In addition to wax, consider using a silicone-based lubricant or graphite powder on the turning parts and the areas where they come into contact with the wood. These lubricants can help reduce friction and make the movement smoother.Adjustment: Look for any screws or bolts that can be adjusted to fine-tune the tension of the turning parts. Loosening or tightening these screws slightly may help alleviate the tightness and ensure proper movement.Padding: If the board is causing the turning parts to become tighter, try adding a thin layer of padding between the board and the mechanism. This could be a piece of felt or foam to cushion the contact points and reduce friction.Check Alignment: Make sure that all the parts of the music box are properly aligned and assembled according to the instructions. Misalignment can cause parts to rub against each other, leading to tightness and difficulty in operation.By implementing these suggestions, you should be able to improve the functionality of your magic piano music box and enjoy smooth operation without any tightness or sticking. Good luck!
@@ginaartsgallery thank you so much for help! 😁👍
재밌내요,
Yes, great fun
I have just received this. Opened the box but couldn’t find the wax. Could you tell me where the wax is located in the box? I enjoyed watching the video.
Sometimes I meet the same situation. I will use a little candle. It works well also.
@@ginaartsgallery I never thought of using candle wax. I have plenty as I am into candle making. Thank you
Where did u get ‘G1’ for step 2 because I am not able to find it
Make sure to carefully check all the sheets for the piece labeled "G1"-the letters and numbers are usually etched near the edges of each piece. If you're unable to find it, double-check the packaging and the instruction booklet to ensure you didn't miss it. Sometimes pieces can be grouped closely together, making them a bit harder to spot.
Great
Thank you!
cool
I was expecting it to play a violin piece after seeing the violin play a piano piece.
You carry happy thoughts with you in case people feeling blue. :)
😆 this is AI isn’t it?!!
I can’t do the first time you use the thing 11:08
The tool need pay attention to the right direction
Wonderfully detailed video. Using it to put together this exact Rokr Magic Music Box puzzle, my first 3D puzzle. I'm using this video instead of reading the instructions, as it is so detailed to even show the part numbers. Very well done and excellent video practices; sharp and concise.
There is an assembly part in your video that was missing (as I was assembling as I watched then would pause and or rewind}. At about the 27 minute mark of the video, the assembly of the legs and the under part of the piano assembly was missing and was a bit confusing to try to figure out, exactly what the parts were and how to assemble them.
So glad that you like the video. You are legend! There was a tiny mistake at the 27 minute mark of the video I made, I put the B5 part upside down! And I correct it later. That is why the legs part is missing.I apologize for the confusion and inconvenience you've experienced with building the Piano.
Idem pour moi
On 12:50 my a1 isn’t floating someone help pls
check the pieces under the F19 if there is any piece missing.
I am watching this video today 5/12/2024 ❤
Amazing vidoe!
Thank you
I’m doing this right now but have run into a problem. I’ve got all of the gears engaging but when I put on F1 they don’t. And suggestions? I’d really appreciate any help you can give me.
When you install part F1 and notice that the gears stop working properly, it could be an issue related to alignment or excessive friction. Here are a few steps you can take to troubleshoot and hopefully resolve the issue:Check Alignment: Make sure that F1 is aligned correctly as per the instructions. Even a small misalignment can cause the gears to bind. Ensure that all parts fit snugly and correctly without forcing them into place.Examine for Obstructions: Double-check that no debris or residual material is causing the gears to stick. Sometimes, small particles can get lodged in the gear teeth, causing them to jam.Loosen Connections: Sometimes, tightening screws or connections too much can put extra pressure on the gears. Try loosening any nearby connections slightly to see if that allows the gears to move more freely.Revisit Previous Steps: Occasionally, the issue might not be with F1 itself but with how previous parts were assembled. Briefly backtrack through your steps to ensure everything prior to F1 was assembled correctly and functioning as expected before F1 was added.I hope these suggestions help you get back on track with your ROKR Magic Piano kit! Let me know how it goes, or if there’s anything else you might need.
I need your help. I’m on the step where I put F1 on. Gears work great but when I put F1 on, they don’t work. I’ve tried everything. Hope to hear from you.
Me too, how to solve it?
Where did you find D21 I can’t find mine and it’s holding me back
You can email the customer service on their official website and they can deliver the part which is your missing.
Hello, I was wondering if you needed any special tools for this? or is everything put together by hand?
No special tool used. All tools come with the box.
Phenomenal video! I came to it because all my gears work fine and smoothly but my keys aren’t moving. They stay “pressed down” instead of moving up and down
Any help, troubleshooting advise would be appreciated. Thank you!
Ensure that there are no foreign objects, debris, or obstructions blocking the movement of the keys. Sometimes, small items can get lodged between the keys, preventing them from moving freely.Examine the mechanism under the keys. Look for any broken or disconnected parts.Check if any of the keys are warped or bent. Warped keys can interfere with the smooth movement of adjacent keys. If you find any warped keys, you may need to replace them.Ensure that all parts of the piano are assembled correctly. Check the assembly instructions and make sure that every component is in its proper place. Check the manual and the most important thing is patience.
@@ginaartsgallery thank you for the advice 🙏🏽
You may find other interesting video in my channel. Hope you will enjoy!
It's great and helpful. But I’ve almost finished step ten and after assembling the two big parts (the part with the keyboard and the one with the two big books), I have noticed that all of my gears don't turn anymore while it was working properly before putting them together. I don’t know what's going wrong. (Sorry for my English)
Taking a systematic approach to troubleshooting can help you identify and address the issue causing the gears to stop turning. Be patient, and carefully go through each step to ensure a smooth and functional assembly.
Is there a way to replace the motor with an electrical one so I'll be able to connect it to USB cable or something similar?
You will need a small electric motor that can fit within the existing structure without requiring extensive modifications. A common choice might be a small DC motor.
Since you mentioned wanting to connect it to a USB cable, you’ll need a USB power supply that matches the motor's voltage requirements. Most USB outputs are 5V, which should generally be suitable for small DC motors used in hobby projects.Secure the motor in place where the manual crank used to be. You might need to create custom mounts using materials like plastic or lightweight metal. 3D printing could be very useful here if you have access to a 3D printer.You may need to adapt or replace the gearing to connect the motor's output shaft to the piano's mechanism. This might involve using gears or belts.Depending on the motor's speed, you may need to add a gear reduction between the motor and the mechanism or use electronic speed control to ensure the piano plays at a realistic speed.Connect the motor to the USB power source through appropriate wiring. Ensure you have a switch to turn the motor on and off.Depending on your motor and power source, you might need a basic circuit to control the power and protect the motor. Components like a resistor or a basic motor driver circuit can be necessary.
@@ginaartsgallery Can you recommend a specific motor to buy? (Maybe a link? )
btw: I like your videos :)
try: www.temu.com
The main part of the piano works fine when not attacked to the keyboard, but when i attach the keys it gets stuck and wont spin. Ive taken apart and redone the keyboard like 3 times. Do ypu have any suggestions on how to fix this?
It sounds like you're experiencing some technical difficulties with your ROKR magic piano music box kit. Here are a few troubleshooting steps you can try to fix the issue:
Check for Misalignment: Make sure that the keys of the keyboard are properly aligned with the mechanism of the main part of the piano. Even a slight misalignment can cause the keys to get stuck when attached.
Ensure Proper Assembly: Double-check that each component of the keyboard is assembled correctly according to the instructions provided with the kit. Pay close attention to any interlocking parts or connections that may be causing friction.
@ginaartsgallery I fixed it. The rotating part of it was facing the wrong way. All I had to do was switch which side the gear was on
@@sofiakarayoff682 Hi , I am facing the same problem and I tried to fix it 100 times but to no avail. Can you help me?
@lolo-cm9js on the part with the gear there is an arrow on the neck. Make sure that arrow is pointing towards the gear
Help…I am missing one screw P7 what importance are these can I use wood piece 😢 or are they acting like a weight😢
don't worry about it. Glue works also.
@@ginaartsgallery Thank you for your response and thank you for your video 😊
Somehow all the gears are at different heights for me. And they arent level, meaning they dont touch and wont turn each other. I put the washers on so im really not sure what went wrong. Probably going to have to rebuild it.
@ginaartsgallery
• 0秒钟前
Ensure that each gear is placed in its designated location according to the instructions. Confirm that the gears are correctly aligned and seated in their respective slots.Double-check the placement of washers. Make sure that the washers are positioned between the gears and the wooden surfaces to allow smooth rotation without friction.If you suspect an error in the assembly, consider disassembling the affected area and carefully reassembling it, paying close attention to the alignment of gears and the placement of washers. Following the assembly instructions step by step can help prevent misalignment.Look for any debris or wood splinters that might be obstructing the movement of gears. Clear any obstructions and ensure a clean and smooth interaction between gears.Inspect the teeth of the gears to ensure they are not damaged or misshapen. If you notice any irregularities, it might be necessary to replace the affected gear. Remember that don't be upset. Rebuild means double happiness!
Bello 👍🥚🖐🏻🐽
Hello, I am from Iran, how should I order this?
you can order this kit from: www.robotimeonline.com/?spm=..collection_efbfd6b5-6911-4334-b3ab-bcae739e2ce0.header_1.1
I’m finding this so helpful!! I’m just coming on to step five and have noticed that all of my gears are turning properly except the biggest one with the gear at the top as well. I don’t know what I’ve done wrong tho 😭😭
Check if the teeth of the gears are properly aligned. Misalignment can cause gears to jam.Make sure the gears are properly seated on their axles or shafts.Inspect the gears for any debris or foreign objects that might be causing interference.Ensure that there is no excess glue or material.preventing smooth rotation.Confirm that the axles or shafts holding the gears are straight and properly aligned.
Check if any part of the mechanism is bent or misaligned.Apply a small amount of wax to the contact points of the gears.Ensure there is not too much friction between the gears, which could impede movement.Verify that the gears are not too tight against each other. There should be a little bit of play to allow for smooth rotation.
Can I make it play another song?
I am sorry to say nope. But this is a really good idea.
@@ginaartsgallery yep, I will try buy a personalized sand box
Oh help you lost me at the start as the packs of screws are not numbered so no idea what you used for joining p1 to c2 ???
Review the assembly manual carefully. Lay out all the screws and sort them by size. You can use a ruler or measuring tape to determine the length of each screw.
Compare the sizes of the screws to the images or descriptions in the manual. This can help you match the screws to the correct step.
Mine won't spin after i attach the keys 😭
Do you wax the gears?
@@ginaartsgallery yeah
11:49
What is this?
@@ginaartsgallery Oh it’s just a time stamp so I remember the last step I did.
Every time you put time stamp, I will check the video again and again. Wonder if I made any mistake.
@@ginaartsgallery Ohh lol im so sorry i didnt know
Help I cannot get my gears to align properly, I’ve been trying to fix it for like 20-50 mins but it doesn’t workkk 😭
Edit: I just figured it out and omg I feel so dumb, the second “floor” was supposed to go UNDER the notches, not OVER
Check the joint the gear carefully, make sure they match.
HOW TO GET WASHER OFF?!
HELP
Apply a small amount of lubricating oil or WD-40 around the washer. Allow it to sit for a few minutes to penetrate and loosen any rust or tightness.
You skipped over part 6 which has you flip the piece over to do the underside. That's what I needed to see but was able to figure it out. Can't tell you how incredibly disappointing it was to see that part cut out when everything else was so detailed.
The underside part is so easy to assemble. Wanna to save the length of the video otherwise the video will be too long. I will try my best to make sure all the details will be covered in my next video. Thank you for your advice!
The video wasn’t helpful enough to be honest there’s a lot of details was difficult to me and I don’t understand how to do it but anyway thank you so much. Amazing job.
Thank you for taking the time to watch the video and for sharing your feedback. I'm sorry to hear that you found some parts difficult to follow. Your input is valuable, and I'll take it into consideration to improve future tutorials. I'm glad you still found some value in the video, and I appreciate your kind words. If you have any specific questions or need further assistance, please don't hesitate to reach out. Thank you again for your support!
@@ginaartsgallery I want to thank you again and I appreciate your wonderful work. My problem is The main part of the piano works fine when not attacked to the keyboard, but when i attach the keys it gets stuck and wont spin. Ive taken apart and redone the keyboard To no avail Would you please explain to me exactly how to solve it?
@@lanaa505 такая же проблема