Permanent Rust Treatment & FRESH ASF Arches On The Ep3!!

Поделиться
HTML-код
  • Опубликовано: 29 окт 2024

Комментарии • 35

  • @ashmcintosh6927
    @ashmcintosh6927 4 года назад

    Such a cute couple. Good on you guys !!

  • @robsmithracing
    @robsmithracing Год назад

    Lockdown projects were the best times 😅

  • @19hmxd
    @19hmxd 2 года назад

    Nice!

  • @hardworker8030
    @hardworker8030 2 года назад

    Out of isopan zinc 182 or simoniz zinc primer what primer would you recommend over rust

    • @ModifiedWeekly
      @ModifiedWeekly  2 года назад

      Iso is always better there's a reason it's like twice the price

    • @hardworker8030
      @hardworker8030 2 года назад

      @@ModifiedWeekly Thank you for you're reply. I've got to treat the rust on my yaris and I didn't know what's best to use on the arches and floor and on the subframe.

  • @altypeRR
    @altypeRR 4 года назад

    As has been sad it was a great time to roll the arches. I did mine when I undersealed the arches and it gives more clearance.

  • @nikjanet
    @nikjanet 4 года назад

    love it. Nice fresh up .

    • @ModifiedWeekly
      @ModifiedWeekly  4 года назад +1

      Nik Murray cheap little job worth doing mate!

  • @AM-wt8qi
    @AM-wt8qi 4 года назад

    Nothing permanent on EP3. until next year. Since you already done undersell this should make a difference though. Looks nice and tidy in there. Recently checked behind rear speaker on mine and a lot of rust along inside of sills so worth a look at this age. Would recommend a good rust converter before applying zinc primer/ topcoat . Personally just put rust converter as it’s not exposed to outside but must get damp somehow . Brushed on aqua steel . Jenolite do an aerosol but found it easier to brush. Maybe do both to get bits you can’t reach. Could wire brush then hoover out loose rust personally just applied aqua steel and left for 24 hrs to convert it. Worth a look at this age as if they weaken then jacking point crumbles. Next video idea !!

    • @ModifiedWeekly
      @ModifiedWeekly  4 года назад

      I never had any deep rust on the arches or anywhere so would of been no point using a proper treater, I had already taken the arches back to bare metal and primered it previously so I’m happy with how they are!😊

    • @AM-wt8qi
      @AM-wt8qi 4 года назад

      Modified Weekly was talking about behind rear speaker if you remove them and look down at inside of sills there will be rust there..

    • @ModifiedWeekly
      @ModifiedWeekly  4 года назад

      A M there’s no rust down there either, already checked the speaker areas😂

    • @jonathan___4684
      @jonathan___4684 4 года назад

      Sounds like if you have rust there then you must have a water leak that needs seeing to asap mate

    • @AM-wt8qi
      @AM-wt8qi 4 года назад

      Jonathan ___ quite common on ep3 must come in through side skirt mounting or something

  • @sammybaker6872
    @sammybaker6872 4 года назад +1

    How many cans did you need per side?

    • @ModifiedWeekly
      @ModifiedWeekly  4 года назад +2

      I used 1 can of each per side, so 2 primer, 2 base and 2 clear!, I ran out after the first arch hence why one was already done😂

  • @latu3374
    @latu3374 4 года назад

    Hey man do u still have the standard oem pedals or have u thought about aftermarket/DC5 pedals ? I got quoted around £60 for the set for my EP but would love a video of installing before I attempted it haha!

    • @ModifiedWeekly
      @ModifiedWeekly  4 года назад +1

      L A T U I got the standard ones still but I have thought about it before so it may be on the cards!

    • @latu3374
      @latu3374 4 года назад

      @@ModifiedWeekly my bro! that would be wicked if u did man!!

    • @tanium275
      @tanium275 4 года назад

      They are easy to do i run them in my ep
      Clutch and brake is 3 holes then rivet em on there they are oem fitment

  • @ChrisDC5TypeR
    @ChrisDC5TypeR 4 года назад

    Looks mint good job I did this to mine looks fresh .. keep your mugan spoiler and pre facelift your back lights .. just saying 😬

    • @ModifiedWeekly
      @ModifiedWeekly  4 года назад

      Thanks mate!, mugen spoiler is defo going😂 and I may look into the pfl lights!

    • @ChrisDC5TypeR
      @ChrisDC5TypeR 4 года назад

      Modified Weekly made big difference to mine just have to change the wire looms.
      You going back OEM spoiler then?

    • @ModifiedWeekly
      @ModifiedWeekly  4 года назад +1

      Yeah

  • @turbomonkey93
    @turbomonkey93 4 года назад

    What camera you using lads

    • @ModifiedWeekly
      @ModifiedWeekly  4 года назад +1

      Samsung s20+ still on phone cameras 😂

    • @turbomonkey93
      @turbomonkey93 4 года назад

      @@ModifiedWeekly wicked I've just brought that phone!

    • @ModifiedWeekly
      @ModifiedWeekly  4 года назад +1

      Is a very good phone for recording after using it for this video we was using iPhone before

    • @turbomonkey93
      @turbomonkey93 4 года назад

      @@ModifiedWeekly nice ! What settings do you have jt recording in for RUclips mate ?

    • @ModifiedWeekly
      @ModifiedWeekly  4 года назад

      Just pre set setting

  • @tanium275
    @tanium275 4 года назад

    Tbh m8 it also was a good time to roll or hamer the arches since u needed to paint then anyway

    • @ModifiedWeekly
      @ModifiedWeekly  4 года назад +1

      I had thought about doing them but since my new tyres don’t catch or anything I didn’t bother🤷‍♀️😂