Just replaced a window motor on a 2000 Buick Lesabre custom on the front passenger side.Its not a walk in the park.To get that third screw loose you need to lower the window about half down and shift the regulator over.
I have a 95 Park Ave. My window motor is working but only rolls window down 1/4 of the way. I can lower the window all the way with a hand on each side. After lubing, it goes down with ease. Once down, it will only roll up 1/4 of the way, and motor just chugs. But I can raise window with both hands and lock it in place my hitting the roll up button. DOES THIS SOUND LIKE A BAD MOTOR? Is there a nylon gear or something that is worn out that could be replaced, or best to just buy a new motor assembly?
+Blake Lieberg Not sure if it will be too different honestly. It's probably pretty close. Just take your time you'll probably be fine. Thanks for commenting! 1aauto.com?RUclips&CTA%20Comment&ATony 866-403-3393
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
When that panel popped off that snap echoed beautifully, that's the sound of a clean work space and tight fasteners.
A trim tool - aka surfboard will enable you to pry the trim off without damaging it like a flat blade screwdriver will.
your a good guy for helping people out like this u have a customer for life
Just replaced a window motor on a 2000 Buick Lesabre custom on the front passenger side.Its not a walk in the park.To get that third screw loose you need to lower the window about half down and shift the regulator over.
I have a 95 Park Ave. My window motor is working but only rolls window down 1/4 of the way. I can lower the window all the way with a hand on each side. After lubing, it goes down with ease. Once down, it will only roll up 1/4 of the way, and motor just chugs. But I can raise window with both hands and lock it in place my hitting the roll up button. DOES THIS SOUND LIKE A BAD MOTOR? Is there a nylon gear or something that is worn out that could be replaced, or best to just buy a new motor assembly?
Thank you so much for posting this! This really helped me!!
Thanks for your time showing this video.. you just save me for pay $400 bucks..on replacing this windows motors thanks
Those 3 screws on the regulator are near impossible to get out on a 2001 Le Sabre.
Good job
+Lonnie Hill Thank you for checking us out! 1aauto.com
I've got a 97, will this tutorial be that much different? i already bought the right motor from autozone and figured out how to get the panel off.
+Blake Lieberg Not sure if it will be too different honestly. It's probably pretty close. Just take your time you'll probably be fine. Thanks for commenting! 1aauto.com?RUclips&CTA%20Comment&ATony 866-403-3393
Will this tutorial work for a 91?
You may be able to apply some of the basic steps shown in this video to your vehicle.