Linked Beaded Bracelet Tutorial Using the Beadsmith One Step Looper Pliers + tips and tricks
HTML-код
- Опубликовано: 5 окт 2024
- Visit my Etsy shop and contact me if you want me to make you a special piece of jewelry!!! I have lots of stones, beads, and wire colors to choose from.
etsy.me/2EUnSzH
Materials Used:
18 gauge wire
8mm beads
My tools are listed below
Xuron Flush Cutter (wire cutter)
www.amazon.com/...
Xuron Bent Nose Pliers
www.amazon.com/...
Xuron Short Nose Pliers
www.amazon.com/...
Xuron Tweezer Nose Pliers
www.amazon.com/...
Xuron Flat Nose Pliers
www.amazon.com/...
Xuron Chisel Nose Pliers
www.amazon.com/...
Beadalon Round Nose Pliers
www.amazon.com/...
Lindstrom Fine Tip Round Nose Pliers
www.amazon.com/...
Beadsmith Bail Making Pliers
www.amazon.com/...
Artistic Wire Nylon Jaw Pliers (wire straightener)
www.amazon.com/...
Beadsmith 1-Step Looper Pliers - 1.5mm
www.amazon.com/...
Beadsmith 1-Step Looper Pliers - 2.25mm
www.amazon.com/...
Beadsmith 1-Step Looper Pliers - 3mm
www.amazon.com/...
Beadsmith Set of 3 1-Step looping Pliers - 1.5mm, 2.25mm, and 3mm
www.amazon.com/...
Beadalon Acrylic Pliers Rack
www.amazon.com/...
Muzhi 5 Piece File and Bead Reamer Set
www.amazon.com/...
Solid Stainless Steel Ring Sizing Mandrel
www.amazon.com/...
Ring Mandrel 3 Piece Set Includes Ring Mandrel, Rubber Jewelry Hammer, and Ring Sizers
www.amazon.com/...
Nexcare Tape - 1 Roll
www.amazon.com/...
Nexcare Tape - 6 Rolls
www.amazon.com/...
Beadalon Electric Bead Reamer (for use with wire rounder attachment)
www.amazon.com/...
Beadalon Wire Rounder Tip (for use with Beadalon Electric Bead Reamer)
www.amazon.com/...
Beadsmith Wire Rounder Tool
www.amazon.com/...
Tool Magic - Rubber Coating for Jewelry Tools
www.amazon.com/...
Beadsmith Wooden Dowel Set
www.amazon.com/...
Good Beginner Tool Set
www.amazon.com/...
ref=nosim?tag=jenniferlcr00-20
Waxed Necklace Cords
www.amazon.com/...
Beadalon Crimp Tool
www.amazon.com/...
126 pc Ear Wire Set
www.amazon.com/...
2100pc 3mm Glass Pearl Beads
www.amazon.com/...
1400pc 4mm Glass Bicone Beads
www.amazon.com/...
4pc Kumihimo Disc Set
www.amazon.com/...
120pc Metal Kumiho End Caps
www.amazon.com/...
Artistic Wire 3D Bracelet Jig
www.amazon.com/...
3 Padded Fabric Necklace Display
www.amazon.com/...
Faux White Leather Ring Display
www.amazon.com/...
Faux White Leather Bracelet Display
www.amazon.com/...
Black Velour Bracelet Display
www.amazon.com/...
6pc Black Velvet Ring Display
www.amazon.com/...
Hematite Beads 4mm - 10mm
www.amazon.com/...
Disclaimer: These are affiliate links. I do make a small commission if you purchase from one of these links.
For business inquiries, feel free to email me at jenniferlcrum78@gmail.com.
#bracelettutorial #jewelrytutorial #jewelrytools
#beadedjewelry #wirejewelry #beginnerfriendly #handmadejewelry #wirework #beaded #beadedjewelry #handmade #jewelry #wire #beadedbracelet #handmade - Хобби
I bought the 2.25 one step looper and I am thrilled! I’ve already made 3 bracelets! I also made a clasp like yours, looks amazing and didn’t think I’d ever be able to make something so pretty. I think you are the only one I’ve seen who uses a long piece of wire and just keep cutting off it. Really minimizes the wire you waste. Thank you very very much for your video!
Awesome! I’m so glad you found it helpful! I’m planning to start live-streaming me making jewelry because I really don’t have the time to edit videos, so watch out for that!
Awesome! I’m so glad you found it helpful! I’m planning to start live-streaming me making jewelry because I really don’t have the time to edit videos, so watch out for that!
Looking forward to it!
I am so glad that I found your video! I just ordered the trio Loopers yesterday. Love the beautiful bracelet, totally inspired by this! Thank you.❤
The color of those beads are fantastic. Thank you for sharing this design with us. 😊😍
Thank you! No problem! I’m hoping to be getting back into posting RUclips videos after I get my taxes done, so keep an eye out for that.
This was by far the easiest, best explained bracelet tutorial ive seen.
Thank you so much for the details and easy to follow instructions
!! I'm new to jewelry making and I'm about to do my first wire project-;
I don't think I would worry about closing the loop as I make the bead, if I just have to open it again to put them together. Would that save you a step? Just wondering...
I had the same question
I loved the way you made your own findings!! Kudos!!!
This is a wonderful tutorial. You are a great teacher. Will be ordering one of these looper tools. Can't wait to try!
Thank you for this lovely tutorial. I was watching it as I was having a screaming headache. Please make sure u see a neurologist to be checked for brain tumor because just 6 months ago I had surgery for a 5.3 cm minginoma. Not wishing that on anyone so get checked, please. Bracelet is just lovely.
Best of luck to you and ur channel.
I’ve had many MRIs for my migraines and luckily there wasn’t a brain tumor. I get checked periodically for them if my neurologist feels there is a reason for an MRI. I’m sorry you went through that! I can’t imagine what you’ve been through with that. I’m glad you enjoyed the tutorial! I’m planning to start posting regularly next month.
I am so thankful for your video. ❤ I just bought all 3 loopers and had no idea I was using them all wrong. I was only making loops for one side of my bead because I didn't realize there was a hole to run the wire through the looper to create the loop on the other side of the bead. I feel a bit silly not realizing that, but thanks to your video I am now using it properly! 😍
Glad I could help!
Thank you for letting us know there was other sizes of the one step. I'll be ordering!
You will love them!!!
Enjoyed this very much
I bought a 1.5mm one step looper and I’ve had a lot of trouble getting nice loops from it. I want to get the 2.25mm because I feel like that’s the size I make more, but I don’t know why I’m not getting loops out of my tool. I don’t usually work with thick wire. I work more with head pins and eye pins. I’m guessing it was made more for thicker wire. Thanks for the video! If you have any tips for this tool, I’d appreciate it. Thanks!
Really pretty beads. Thank for making this video. You are right that there are not many videos out there on these one step loopers. Right now i only have the 1.50mm. I want the 2.25mm one. Great video!
Glad it was helpful!
Beautiful!
Love the bracelet. I bought a looper, but didn't know they had 3. I ended up with the 1.5 but I'll get the middle one soon. Thanks for sharing. ❤
So glad you found it helpful! I plan to start live-streaming on RUclips soon, so watch out for that.
I loved your video. It was extremely informative and helped me create a bracelet. the first one I can actually follow along with and make the bracelet.
Glad it was helpful!
New subbie here, thank you for sharing your talents I truly learned so much.
Welcome! I’m so glad you subscribed! I’m planning on getting back into RUclips in some fashion soon. It may be through livestream, which stay up. So keep an eye out for that. Also, on Patreon, I’m offering beginner wire working classes for $10 per month and I will teach a minimum of 2 classes per month. You can find me on Patreon under JLC Jewelry Designs.
This is great love it
Thank you! I’m glad you found it helpful!
Could you please give me the make and names of the two pliers you used in this video. Thank-you
What would you sell that bracelet for
Awesome video, how do I do a clasp for necklace?
I do it the same way. For necklaces, I like to use 18 gauge wire. Hope that helps! I’m planning to start live-streaming making jewelry soon.
Please tell me about your Apple Watch mesh band.Thanks.
Here’s the Amazon link to it. www.amazon.com/dp/B099PXX2K2/ref=nosim?tag=jenniferlcr00-20
@@JenniferCrum78 Thank you, Jennifer, for sharing this link. I received mine today and am favorably impressed. I liked the Apple version, but just did not think that it was worth the price. I recently bought a silver stainless Series 7 and this silver mesh band looks great with it. It has a strong magnet, fits well and is secure. I have only worn it for the last hour, but I think that it will be comfy.
Thanks again! S.N.
Let me ask you what wire gauge should I be using that’s good for brackets
I’m not sure what you mean by brackets. For bracelets, if the wire will fit through the hole of the bead, I like to use 18 gauge. For 4-6mm beads, I typically use 20 gauge. That the smallest gauge typically use for bracelets.
@@JenniferCrum78 ok that’s what I wanted to know thanks
? In using the looper how loose should the bead be
I always push the beads to the edge of the looper tool before closing it. It may not close all the way, but if you take your pliers and bend it around, I’ve found it doesn’t distort the loop as much. Overall, you want your beads to have just the room they need.
What's wrong with your hands?
I have Psoriatic Arthritis. It affects mostly my hands and causes a lot of swelling.
@@JenniferCrum78 oh no
@@JenniferCrum78 Does it hurt?
It’s an autoimmune disorder. Sometimes my hands get sore, but overall, it’s pretty well controlled with medication. I’ve found that making jewelry and using copper cored wire really helps my hands to stay strong and limber.