The installation process is typically very similar for all vehicles. I would recommend having a watch on some of our other DIY videos and you will gain a general knowledge of how LEDs are installed. Also, all the bulbs are typically very simple to access with a trim tool kit, which comes complimentary in all interior packages.
1:18 How do I attach the passenger dome LED plastic cover to the ceiling? Mine does not have a way to attach. Am I missing a part? It appears that it is supposed to glue on somehow because I found residue and there is no way to snap it on to place.
I'm having trouble getting the map lights out of the sockets. I can get them out of the car but to get the actual bulb out of the yellow piece is hard. I'm afraid of breaking the bulb
Check out this quick tutorial and perhaps it will help. If its really stuck, use pliers to grip the yellow bulb socket, and use tape to get a better hold of the glas bulb to pull out. This will prevent the bulb from breaking in between your fingers. How to Remove 168 194 T10 and BA9S Type Bulbs
Thank you for your interest. The footwells should be the exact same as shown in the video. The installation process is almost the same for all vehicle's/lights. There are only minor differences sometimes.
I had no problem taking off my map lights from the ceiling, but now it's not snapping back into place at the end where the sunroof dial is. How am I supposed to fix this??
The entire assembly is held in place with 4 pincer shaped clamps in the corners that need to be forced into position. If you are confident in the position, just give it a solid bump with your fist to make certain its securely fitted.
Only the 2 at the front have the snap in circular shaped clamps that snap into place. The 2 in the back are just completely rectangle flat pieces that go between a metal clamp on the ceiling, but the clamp doesn't clamp it tight. It just holds it so it doesn't move side to side. It won't go all the way in and snap into place. I've hit it several times and it doesn't go in place. It is really annoying especailly at night since the light leaks on the edges since they're not touching the ceiling anymore
If your CTS comes with halogen footwell lights, they would be the T10 fitment, which you can find here: www.precisionled.com/premium-t10-canbus-6smd-5730-led.html
Yes, Both the CTS-V and the CTS have the same lighting setup. No worries there.
-PLED Team
great video...Helped a lot didn't have to pay someone to do it for me! saved money and time!!!
Glad we could help!
well put together video. love the background track
+moralesef Thanks!
Can you do a video on a 2013 ctsv
great video. I did 2007 cts map lights and license plate leds. now I want to do the headlights but that may be too much work for my feeble mind
Thanks for tuning in!
@5:30 . Body ? I was just casually watching and h got my attention 😂
Thank u soo much helpfull hard to find how to do it on dis model of car
We are glad to help!
Now i can get it done thx
😀😀
Do you have a video for the same years but a Cadillac SRX? any idea if install is similar? thank you.
The installation process is typically very similar for all vehicles. I would recommend having a watch on some of our other DIY videos and you will gain a general knowledge of how LEDs are installed. Also, all the bulbs are typically very simple to access with a trim tool kit, which comes complimentary in all interior packages.
Hey I need help to find the right size for the door light for a 2007 Cadillac cts
Under the dash? If you are more specific we might be able to answer your questions.
Cheers,
-PLED Team
1:18 How do I attach the passenger dome LED plastic cover to the ceiling? Mine does not have a way to attach. Am I missing a part? It appears that it is supposed to glue on somehow because I found residue and there is no way to snap it on to place.
The lens cover would snap into place with tabs. However, it is possible, if not careful, the tabs broke off when removing the lens.
@@PrecisionLED Not the lens; the whole housing plastic unit.
Is there a link for that LED strip that was installed in the trunk.
What about the courtesy footwell
great video what is the color used in the video 6000k?
Thank you for your interest. We do have listed the 6000K crystal white color was used in this video.
What size is the door led light??
Nice! What size is the bolt/socket to remove the licence plate light removal?
Thank you for your interest. It would typically be a 10mm, however, this could vary from vehicle to vehicle.
I'm having trouble getting the map lights out of the sockets. I can get them out of the car but to get the actual bulb out of the yellow piece is hard. I'm afraid of breaking the bulb
Check out this quick tutorial and perhaps it will help. If its really stuck, use pliers to grip the yellow bulb socket, and use tape to get a better hold of the glas bulb to pull out. This will prevent the bulb from breaking in between your fingers. How to Remove 168 194 T10 and BA9S Type Bulbs
what type of light is the dome light and the side door light sizes and does the dome light come as a blue led
+dante Paige Dome is 44mm, Door is 44mm. Dome is available is Blue
+PrecisionLED how do I remove plastic housing
Have a watch of the video referenced above. It does indeed show how to remove the plastic housing.
What’s the door light bulb size? Please
Sorry, we do not have video footage of a DRL replacement. We will however add it to our list of things to do so subscribe and stay tuned!
-PLED Team
How do you install the footwell lights
Thank you for your interest. The footwells should be the exact same as shown in the video. The installation process is almost the same for all vehicle's/lights. There are only minor differences sometimes.
I replaced the map lights and license plate. I have 6 more leds...each door but where can the other 4 go?
I believe the remainder of your LEDs would fit in the footwell and the dome.
PrecisionLED thank you. I would love to put leds for headlights but why cadillac made it so difficult to replace lights is beyond me
I had no problem taking off my map lights from the ceiling, but now it's not snapping back into place at the end where the sunroof dial is. How am I supposed to fix this??
The entire assembly is held in place with 4 pincer shaped clamps in the corners that need to be forced into position. If you are confident in the position, just give it a solid bump with your fist to make certain its securely fitted.
Only the 2 at the front have the snap in circular shaped clamps that snap into place. The 2 in the back are just completely rectangle flat pieces that go between a metal clamp on the ceiling, but the clamp doesn't clamp it tight. It just holds it so it doesn't move side to side. It won't go all the way in and snap into place. I've hit it several times and it doesn't go in place. It is really annoying especailly at night since the light leaks on the edges since they're not touching the ceiling anymore
How do get the bulb off the yellow thing that thing with tape didn't work for this
What yellow thing are you referring to? Could you please reference a timeframe in the video?
PrecisionLED actually i got the wrong ones do you the size of them? From the map light
How much is the set .. 04 Cadillac CTS ?
Tabitha Ramos Just check the description link for the product on our website. depending on what you want, the price of the kit can change.
how do I remove halogen bulb
Thank you for your interest. It explains how to remove every halogen bulb referenced in the installation.
Adante Paige pull
This would be an even more insightful video if you had included the footwell lights and told us the sizes for each bulb! 😥
If your CTS comes with halogen footwell lights, they would be the T10 fitment, which you can find here: www.precisionled.com/premium-t10-canbus-6smd-5730-led.html