Hi again, I was having a hard time opening the top on my first try , I had to watch your video again, and I figured it out as soon as I watched again. Thanks, your video was the best
I just bought mine and couldn't get a thing from the instructions. This makes so much more sense!! Thank you --- is there a blade I can purchase to make thicker slices?
Thank you for this video, I was having a hard time putting the parts of the food processor together, your video helped a lot since my processor did not come with instructions
How did you get the shredder blade to fit? Mine won't allow the top to close. It's like it's too close to the top, and needs to go further down. It sits at the top of the machine, but the top floats above it, and won't settle down into place. Any suggestions? Thanks
My processor is missing the center piece on which the shredding/slicing disk rotates. How can I get that part replaced? I don’t have the box or owner’s manual.
Hello! I have been using this food processor for quite some time now but processed food gets trapped between the transparent base and the white rod and unscrewing it for cleaning is extremely difficult. Can you please suggest some easy method. Thanks.
How to remove the center post from the work bowl for cleaning: (*NOTE: My center post is dark gray. Yours may be a different color). Turn the work bowl upside down, grasp two of the dark gray tabs with your thumb and index finger and turn clockwise (right). This unlocks the center post from the work bowl so it can be removed for cleaning. When you're done, put the center post back up into the work bowl column, seat the dark gray tabs BETWEEN the clear tabs of the work bowl, grasp two of the gray tabs and turn counterclockwise (left) until it locks into place. Done.
Excellent demo; thanks so much! 😊 I do have a couple of questions though - if you don’t mind. Which setting would I use if I wanted to grind rolled oats into a powder/dust? Also, I need to grind small, hard cat food morsels (pea sized) into a fine dust/powder as well... I’ve just unboxed this processor and am about to assemble it.... and I thought I’d ask so I can get right to it ASAP. Thanks so much! Your advice is appreciated!
StatUpBox Okay, thanks! I’ve gotten busy with other things since my unboxing the other day and I haven’t been back to it since. Would I just pour the rolled oats (or the cat food kibble) right into the big canister area - and then just turn it on? Sorry - I’ve never used a food processor before in my life so I’m unsure how to even do this.... 😳
helpful video. I'm wondering why my oyster food processor didn't come with a manual. even though I have a different food processor your video helped me figure it out as I couldn't find step by step detailed videos on yt featuring oyster F.P. though mine is slighly different your video still helped me.
professionalmartinez if you are talking about the white bottom rotator part , it should be able to unlock either to the left or to the right you should look under it and see where the bigger space goes too,it should also have a clicking little stick , that locks it you can try by gently trying to make pressure to where it unlocks very carefully with out damaging it. Also once a piece of carrot got lodge preventing it from twisting, you can check to see if there is a piece of food lodge in between. my last option to try is you can take some cooking oil room temperature and poor it in the the rotator part where the stick is in the inside and in the outside of it on the bottom also where it rotates (not on the machine but only on the cup it self). see if this would help it get easier to come off. good luck.
professionalmartinez I found the manual and I finally could open it... with my husband 's help. Here it is: How to Insert and Remove the Center Post The center post is removable: 1. Turn the bowl upside down. 2. Grasp the clear outer tabs and turn the center post clockwise until the lower tabs are free. Lift the post out (C). 3. To return to its original position, place center post into smaller opening in bottom of workbowl and turn counterclockwise until tabs snap into place. I can add a tip. The outer tabs are the locking tabs inside the gear, not the three tips outside the circle. You should press them at the same time and rotate the complete assembly clockwise. We use at first three knifes to press them in order to rotate the center post. Luck!
Help please I can not put my peices down all the way to make the top go back on I think I’m missing a piece or something but I’m not sure the white piece that goes inside the main part is there. Is there another little piece that goes on top of the white one ?
I received this as a Christmas gift and just unboxed it today. i assembled it just as you showed in your video, and did read the instructions that came with it as well. First, I used the large blade piece to finely chop some celery...and that worked well. I was making a creamy Cauliflower soup and needed to puree the veggies and broth one they were cooked. Once the cooked mixture cooled off a bit, I put 4-5 cups of it into the bowl...it was not up to the fill line....locked the lid and started to pulse it. The liquid started pouring out around the bottom of the bowl, and all down inside the base and all over my counter!!! I immediately unplugged it. I had everything locked in place...I believe it is probably ruined now because the liquid ran down into the base and the housing where the motor is :-( Any idea what could have gone wrong? I am so disappointed!
How to remove the center post from the work bowl for cleaning: (*NOTE: My center post is dark gray. Yours may be a different color). Turn the work bowl upside down, grasp two of the dark gray tabs with your thumb and index finger and turn clockwise (right). This unlocks the center post from the work bowl so it can be removed for cleaning. When you're done, put the center post back up into the work bowl column, seat the dark gray tabs BETWEEN the clear tabs of the work bowl, grasp two of the gray tabs and turn counterclockwise (left) until it locks into place. Done.
How to remove the center post from the work bowl for cleaning: (*NOTE: My center post is dark gray. Yours may be a different color). Turn the work bowl upside down, grasp two of the dark gray tabs with your thumb and index finger and turn clockwise (right). This unlocks the center post from the work bowl so it can be removed for cleaning. When you're done, put the center post back up into the work bowl column, seat the dark gray tabs BETWEEN the clear tabs of the work bowl, grasp two of the gray tabs and turn counterclockwise (left) until it locks into place. Done.
How to remove the center post from the work bowl for cleaning: (*NOTE: My center post is dark gray. Yours may be a different color). Turn the work bowl upside down, grasp two of the dark gray tabs with your thumb and index finger and turn clockwise (right). This unlocks the center post from the work bowl so it can be removed for cleaning. When you're done, put the center post back up into the work bowl column, seat the dark gray tabs BETWEEN the clear tabs of the work bowl, grasp two of the gray tabs and turn counterclockwise (left) until it locks into place. Done.
i have one new machine can u jus show me how is assembling and demonstation of all functions below mentioned is the model Black & Decker 800W Food Processor 41 Functions FX810-B5 Thanks Riyaz
Looks like a$30 machine to me. The Cuisinart 11 cup food processor is the only one less than $200 that has a seven level thickness adjustment in the slicing disk. Pity.
Hi again, I was having a hard time opening the top on my first try , I had to watch your video again, and I figured it out as soon as I watched again. Thanks, your video was the best
Great review, though I realize this video is old! I just received this as a Christmas present and I'm glad your video is still up!
Thanks so much- now I understand how to use the shredder/slicer & will use them for the first time after having my food processor for years!
+skye a desertkhaat nice! Thanks!
I just bought mine and couldn't get a thing from the instructions. This makes so much more sense!! Thank you --- is there a blade I can purchase to make thicker slices?
Thank you for this video, I was having a hard time putting the parts of the food processor together, your video helped a lot since my processor did not come with instructions
Awesome 😊👍
instructions work well,,,, follow the photo description
Thank you for this easy demo! It came in handy today 😊
How did you get the shredder blade to fit? Mine won't allow the top to close. It's like it's too close to the top, and needs to go further down. It sits at the top of the machine, but the top floats above it, and won't settle down into place. Any suggestions? Thanks
Thanks. With out your instructions I was having a hard time putting the parts together. Great review!
+Pasha Turley thanks!
just bought this today. review very helpful but please dont put your hands in a food processor unless it is UNPLUGGED
Very informative. I just bought this and yours was a great introduction. Thank you.
Awesome!!
My processor is missing the center piece on which the shredding/slicing disk rotates. How can I get that part replaced? I don’t have the box or owner’s manual.
Thanks your reviewed helped me better than most I appreciate it thanks again
Glad I could help
Hello! I have been using this food processor for quite some time now but processed food gets trapped between the transparent base and the white rod and unscrewing it for cleaning is extremely difficult. Can you please suggest some easy method. Thanks.
How to remove the center post from the work bowl for cleaning: (*NOTE: My center post is dark gray. Yours may be a different color).
Turn the work bowl upside down, grasp two of the dark gray tabs with your thumb and index finger and turn clockwise (right). This unlocks the center post from the work bowl so it can be removed for cleaning. When you're done, put the center post back up into the work bowl column, seat the dark gray tabs BETWEEN the clear tabs of the work bowl, grasp two of the gray tabs and turn counterclockwise (left) until it locks into place. Done.
Thank you for this excellent demo!! Very helpful.
You're welcome
Excellent demo; thanks so much! 😊
I do have a couple of questions though - if you don’t mind.
Which setting would I use if I wanted to grind rolled oats into a powder/dust?
Also, I need to grind small, hard cat food morsels (pea sized) into a fine dust/powder as well...
I’ve just unboxed this processor and am about to assemble it.... and I thought I’d ask so I can get right to it ASAP.
Thanks so much!
Your advice is appreciated!
you can but wont be as powdery
StatUpBox Okay, thanks!
I’ve gotten busy with other things since my unboxing the other day and I haven’t been back to it since.
Would I just pour the rolled oats (or the cat food kibble) right into the big canister area - and then just turn it on?
Sorry - I’ve never used a food processor before in my life so I’m unsure how to even do this.... 😳
I have this processor. Am I able to purchase the blade that fits down inside it
You made a great video!..thank you sir!
You made a good video
Thanks a million for
Thanks. Very helpful. I lost my manual!
Thanks, Finally got it together ...
nice!
Nice tutorial
helpful video. I'm wondering why my oyster food processor didn't come with a manual. even though I have a different food processor your video helped me figure it out as I couldn't find step by step detailed videos on yt featuring oyster F.P. though mine is slighly different your video still helped me.
Thank you. This helped me so much!!!
Glad it helped!
I just got an 8 cup Black and Decker at second hand store. Never been used but there is no manual with it. Where can l find one.
You should be able to download it or see it online, you should know its model number.
Very helpful!!
😊👍
So does it chop or dice veggies?
Thank you for this I wish I saw this earlier upload one with flour making dough please God Bless you
my question is how do u get that bottom rotator piece off when its time to clean it..mine seems stuck
professionalmartinez if you are talking about the white bottom rotator part , it should be able to unlock either to the left or to the right you should look under it and see where the bigger space goes too,it should also have a clicking little stick , that locks it you can try by gently trying to make pressure to where it unlocks very carefully with out damaging it. Also once a piece of carrot got lodge preventing it from twisting, you can check to see if there is a piece of food lodge in between. my last option to try is you can take some cooking oil room temperature and poor it in the the rotator part where the stick is in the inside and in the outside of it on the bottom also where it rotates (not on the machine but only on the cup it self). see if this would help it get easier to come off. good luck.
+professionalmartinez could you open it? I have the same problem. It seems to be stuck! How did you solve this? please
+CLAUDIA RESENDIZ i just kept at it lol for like a friggin week or so ...irs annoying
professionalmartinez I found the manual and I finally could open it... with my husband 's help. Here it is: How to Insert and Remove the Center Post
The center post is removable:
1. Turn the bowl upside down.
2. Grasp the clear outer tabs and turn the center post
clockwise until the lower tabs are free. Lift the post
out (C).
3. To return to its original position, place center post
into smaller opening in bottom of workbowl and turn
counterclockwise until tabs snap into place.
I can add a tip. The outer tabs are the locking tabs inside the gear, not the three tips outside the circle. You should press them at the same time and rotate the complete assembly clockwise. We use at first three knifes to press them in order to rotate the center post. Luck!
+CLAUDIA RESENDIZ good info
Help please I can not put my peices down all the way to make the top go back on I think I’m missing a piece or something but I’m not sure the white piece that goes inside the main part is there. Is there another little piece that goes on top of the white one ?
sometimes the two white center that holds the shredding disk come a little loose, with a couple of taps, you can tighten them back in place.
I received this as a Christmas gift and just unboxed it today. i assembled it just as you showed in your video, and did read the instructions that came with it as well. First, I used the large blade piece to finely chop some celery...and that worked well. I was making a creamy Cauliflower soup and needed to puree the veggies and broth one they were cooked. Once the cooked mixture cooled off a bit, I put 4-5 cups of it into the bowl...it was not up to the fill line....locked the lid and started to pulse it. The liquid started pouring out around the bottom of the bowl, and all down inside the base and all over my counter!!! I immediately unplugged it. I had everything locked in place...I believe it is probably ruined now because the liquid ran down into the base and the housing where the motor is :-( Any idea what could have gone wrong? I am so disappointed!
When there is alot of liquid it does over flow on the inside center.
Hello 👋 thanks :-)wasted 3 cucumber and didn't know until now :-)
I thoroughly enjoyed this video...
thanks
if the two separate pieces the small white pieces are jammed together do you know any way you can un-jam them. :(
that happen to me twice first i placed it in hot water second time i put some cooking oil to loosen. good luck
Wonderful presentation!!!! I bought one and the instructions were too vague, but you were on point!! Thanks!!!
thanks!
Thnks 4 making this job of putting the 8 cup blck & decker together so easy 💞💞
You're welcome
How to remove the center post from the work bowl for cleaning: (*NOTE: My center post is dark gray. Yours may be a different color).
Turn the work bowl upside down, grasp two of the dark gray tabs with your thumb and index finger and turn clockwise (right). This unlocks the center post from the work bowl so it can be removed for cleaning. When you're done, put the center post back up into the work bowl column, seat the dark gray tabs BETWEEN the clear tabs of the work bowl, grasp two of the gray tabs and turn counterclockwise (left) until it locks into place. Done.
The white part at the base that does the circulation, how do u remove it to clean?
How to remove the center post from the work bowl for cleaning: (*NOTE: My center post is dark gray. Yours may be a different color).
Turn the work bowl upside down, grasp two of the dark gray tabs with your thumb and index finger and turn clockwise (right). This unlocks the center post from the work bowl so it can be removed for cleaning. When you're done, put the center post back up into the work bowl column, seat the dark gray tabs BETWEEN the clear tabs of the work bowl, grasp two of the gray tabs and turn counterclockwise (left) until it locks into place. Done.
I was looking for a review about making dough in the food processor.
Thank you so much for this review!! Have you ever tried to make peanut butter in it?
have not but that sounds like a good idea.
Hola. La pieza que hace contacto entre el eje central y la base cómo se llama? Me puede enviar una foto? Porque no la encuentro y quiero repararla
Thanks!!!🥰
How do you remove the center post for cleaning?
How to remove the center post from the work bowl for cleaning: (*NOTE: My center post is dark gray. Yours may be a different color).
Turn the work bowl upside down, grasp two of the dark gray tabs with your thumb and index finger and turn clockwise (right). This unlocks the center post from the work bowl so it can be removed for cleaning. When you're done, put the center post back up into the work bowl column, seat the dark gray tabs BETWEEN the clear tabs of the work bowl, grasp two of the gray tabs and turn counterclockwise (left) until it locks into place. Done.
Love it
This helped so much thanks.
thanks!
I've had mine for 2 years and I can't understand why my silver slicer and dicer (whatever it's called) isn't spinning.
have you checked the plastic in the middle if its loose or broken?
Video very helpful thanks
Thanks!
How to remove the blade from the holder? I got one I can't remove it
Thanks for the video.
You're welcome
Can we make dough in this
Where can we get replacement pieces
Very helpful! Thanks 🙏🏻
you are welcome.
Thank you for this video
you're welcome
Why when I make Mexican sauce the tomato make it juicy and it spills all over?
Can't we make finger chip slices out of this rotating disc?
+Dreams i have done potato chips slices, plantain chip slices with the rotating disk
Thank you.
you are welcome! :)
my brand new machine will not start!! How do I fix it?
+Debbie Perez if it is brand new then best thing to do is to take it back to the store or online return. good luck
Can you put liquid in it too?
yes you can,what u dont want to over fill it beacuse then it may drip out fom the sides , I would not go over half way.
Thanks!
i have one new machine can u jus show me how is assembling and demonstation of all functions below mentioned is the model
Black & Decker 800W Food Processor 41 Functions FX810-B5
Thanks
Riyaz
don't have that model, but if i get my hands on one of those , I will let you know. good luck!
+StatUpBox thnk u sir
How to open the bottom part to clean
Does it work on meat ?
Yes
Looks like a$30 machine to me. The Cuisinart 11 cup food processor is the only one less than $200 that has a seven level thickness adjustment in the slicing disk. Pity.
Only issue with mine is the noise! Otherwise it's great for the price. I make pizza dough in it!
THE PROCESSOR SHOULD BE UNPLUGGED WHEN ASSEMBLING AND TAKING APART!! READ MANUAL!!
I was wondering if anybody knew if this made really good cauliflower rice?
Yes it does. We have
@@StatUpBox well thank you for the quick response. I appreciate it
If you use shredding option you get a better cut than the regular blade ( it leaves it a little more mushy)
@@StatUpBox thanks for the advice I definitely will try that out.
I can’t even see the video what’s going on here
Just one and it’s not turning on.
Omg that thing is noisey