Mine will not charge iam thinking it might be broken solder joints at the charge plug so i hoped to see some closeups of the pcb where you connect the charger.
Came here to see how you disassemble this thing. I'm thinking about replacing the 12 VDC cigarette lighter style port with something that will provide a more reliable connection. Thoughts?
18x2500=45,000mah. Series of 3(at 3.7 nominal volts)=11.1volts. 11.1x45ah= 499.5 watt hours. Cheap Chinese cells but should be ok. Nominal volts on these cells is actually 3.6 not 3.7 but whatever. Under heavy loads performance will decrease greatly.
You need to wake up the cells, the thick wires he pulls at 5:23 are the battery pos and neg. I used a car jump starter pack with resistors on the positive and negatives touched to the inside of the xt-60 plug and held it there for 10 seconds, re-installed the connector, verified it woke up, verified it received a charge and put it back together. Hope this helps you or someone else.
just a question, i have some problems with the ac out.... after an error36 my ac ports is not working anymore, during the teardown have you see some fuses in the ac line or not?
Yeah well, it was not a secret . Specs could be seen before buying. It does helps to improve the cycle life which is longer conpared to fast charging models with same batt
4th comment here support always sir ! 😁
Mine will not charge iam thinking it might be broken solder joints at the charge plug so i hoped to see some closeups of the pcb where you connect the charger.
Idol 2nd comment. Nice video po lodi
hehe, dapat kahapon p yn.. ayaw lng mag upload ng thumbnail
Came here to see how you disassemble this thing. I'm thinking about replacing the 12 VDC cigarette lighter style port with something that will provide a more reliable connection. Thoughts?
it only 10A,for me cigarette lighter port are good enough.
Not bad for 36,000mah, I wonder if the board can hold up to long run times
let's see.. make another video about it
18x2500=45,000mah. Series of 3(at 3.7 nominal volts)=11.1volts. 11.1x45ah= 499.5 watt hours. Cheap Chinese cells but should be ok. Nominal volts on these cells is actually 3.6 not 3.7 but whatever. Under heavy loads performance will decrease greatly.
Sir, nagrepair po kayo bluetti eb55? No input both solar & adapter. Salamat po
ganda idol!!! pwede kaya iupgrade battery nyan? para tumagal ng mga ilang oras.
Hello. My AC50s is dead after being idle. I put it on AC or solar to no success. How do I bump the BMS after opening the case? Thank you.
You need to wake up the cells, the thick wires he pulls at 5:23 are the battery pos and neg. I used a car jump starter pack with resistors on the positive and negatives touched to the inside of the xt-60 plug and held it there for 10 seconds, re-installed the connector, verified it woke up, verified it received a charge and put it back together. Hope this helps you or someone else.
Also you can leave all the other connections intact you only have to pull the lid portion off to gain access.
Mga magkano kaya ang aabutin sa para sa 6-7hrs charging time ng ac50s? Maraming salamat! More power!
just a question, i have some problems with the ac out.... after an error36 my ac ports is not working anymore, during the teardown have you see some fuses in the ac line or not?
yes there is fuse inside but not sure if it's for ac
Ho much power can be generate of thia generator ?
ganda sir nyn.. salamat sa bagong kaalaman..keep up the great vlog sir.. pa dalaw din.. sending my full support syo.. frm DIY pinoy.. 👏👏👏😍
Ganda nyan sir
They made really such a good battery pack ;)
San niyo to nabili sir anung brand?
How much? You bought price.
Boss hindi na gumagana ac output ko sa ac50s. Anu dapat gawin?
Hoping you will give one of this.
this thing looks very cool but at the same time you can feel how cheap produced it is. like...
the plastic is one of the easy breaking kind one.
Very Good!
Is the battery replaceable? Maybe from a 3rd party
Definitely not silent at all, it had a very loud fan.
Price?
First view
diy same specs but 1/4 the cost with lifepo4, inverter, boost/buck converter
yes your right, but if you don't know how to diy, this kind of power station you can get.
idol, @sicat2345 nagbebenta ba kayo ng diy at 1/4 ang cost ac50s?
Not available in India
so euhh... e36 ... whats up with that code... manual workaround doesn't work...
I hope you will notice ang give one of this.
와우
It took 7 hours and 22 minutes to charge that small power station. That is definitely slow in my book.
Yeah well, it was not a secret . Specs could be seen before buying. It does helps to improve the cycle life which is longer conpared to fast charging models with same batt
It will charge faster by solar. 122 watts. vs 86 watts with ac charging brick.
Sana ulasabilirmiyim