Ada rupanya orang kita bikin video beginian. Oke banget. Biasa nonton punya bule-bule tok. Jangan bosen ngerekam bos. Sukses terus channel dan bengkelnya.
Last time, I used a shaper (we called it Schepping in Germany) was more than 45 years ago. Nowadays nobody will use a shaper in Germany, except hobbyists and very small company's. They all use machining centers. Nice to see the good work...
This takes a lot of concentration and coordination skills, especially in the finishing process. Would be a bad day to scew up the last tooth... well done guys!
PARA ESO HAY UN DISCO DIVISOR Y UNA FORMULA PARA QUE LAS DIVISIONES SEAN EXACTAS AL MENOS QUE SE LLEGARÁ AFLOJAR LA PIEZA Y ENTOCES SI VALIO VERGA TODO
Ada alat tambahannya g pak saat proses shapingnya? Saya pikir cuma untuk meratakan dan buat alur saja mesin shapingnya pak... Sangat berguna buat para pemula macam saya pak
- Not a serial manufacturing - only two gears at final. Anyway selling "old" machines to small factories is better way than just melt hem into a scrap.
Try to order this on the CNC, I wonder if they will be interested in you at all? Or will you break through the order queue? For a CNC machine of this size, the production queue is scheduled for months.
i'm laughing. i used to machine spur gears that the center hub alone was this size. 24 inch bore spur gears went to 180 inch diameters. 24-30 inch faces.. love machining big stuff.
They've been doing this for 5 years, judging by the other videos. If the gears didn't work, their customers would have told them by now. Probably a fair bit a latitude at this size.
Kalau boleh tau dan kalau g' keberatan boleh lah saya minta rekomendasi atau saran dari bapak/mas yg bekerja di budi karya teknik ini .saya pengen tau aja ..mata pahat skrapnya buat sendiri atau beli di toko teknik ya..?? Soalnya saya lihat di video ini Enak aja gitu si mata pahatnya makan benda kerjanya , mulus dan rapi tanpa hambatan.. Saya baru pemula soalnya di dunia seni besi pak /mas..jd butuh banyak saran dan masukan dari para2 senior.. Terimakasih..🙏 Salam kenal pak/mas..🙏
Budikarya Teknik Jalan Pasundan No. 27, Sabandar, Karangtengah, Muka, Kec. Cianjur, Kabupaten Cianjur, Jawa Barat 43215 (0263) 262712 goo.gl/maps/adTc3gWZBzP2
sometimes a hob might not have the correct profile. bastard sizes are prevalent on old equipment. the old timers would design the tooth profile in such a way that a buyer would have to return to the original supplier to get the correct part. grinding up a new hob for 1 0r 2 parts is not economically feasible- even if you can match up the tooth geometry.
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
Ada rupanya orang kita bikin video beginian. Oke banget. Biasa nonton punya bule-bule tok.
Jangan bosen ngerekam bos. Sukses terus channel dan bengkelnya.
Terima kasih ya 🙏
You do what you can with what you have. Amazing skills right there.
Definitely the best gear making video I have ever seen!!! You guys do good work!!!
Wow thank you so much 🙏🙏
Di tunggu vidio selanjutnya bang 🔥
Un buentrabajo😎 maestro algun dia are trabajos asi felicitaciones.siga suviendo mas videos siempre los sigo.gracias.😁
Last time, I used a shaper (we called it Schepping in Germany) was more than 45 years ago. Nowadays nobody will use a shaper in Germany, except hobbyists and very small company's. They all use machining centers. Nice to see the good work...
Thank you so much 🙏
Awesome work guys keep it up 👍👍👌👌
Imdonesian people its so awesome...
Mantap brother
Some of the best!!! Well wishes from America! Your company does impressive work!!
Thanks a lot 🙏
This takes a lot of concentration and coordination skills, especially in the finishing process. Would be a bad day to scew up the last tooth... well done guys!
No chance for a fatter or thinner last tooth. Hah?
PARA ESO HAY UN DISCO DIVISOR Y UNA FORMULA PARA QUE LAS DIVISIONES SEAN EXACTAS AL MENOS QUE SE LLEGARÁ AFLOJAR LA PIEZA Y ENTOCES SI VALIO VERGA TODO
You must get great job satisfaction creating such beautiful things..amazing creations.👍
Super extremely Great Work. Well done Fren 👍👍👍👍
Thx sob 🙏
The working out of each tooth was absolutely amazing.
wish I could have seen you do your markings.
Brilliant work....if you can make that you can make anything...👍👍
Làm cách nào để tải video
Để trải nghiệm cái thống kê chi tiết nó không có nghĩa vì nhà chế tạo họ làm cái gì đó tôi có thể ví dụ như cái video không có hồi kếtvideo giở giang tôi trình độ văn hóa kém vì vậy hay bị lãnh trí
Excelente trabajo los felicito, muy bonito, saludos.
3:01 - Original Mitutoyo? Or a Chinese copy?
Amazing work!
Excelente trabajo
Grat job
What a slow process .. is that a hand watch gear ?
Nice work how long did the shaping take
ไสยังงัยให้ได้แบบนี้ อันนี้คือโคตรเทพจริงๆ
Amazing skills super
Гениально! В следующем видосе покажите как правильно лазать по деревьям.
Mantap, 👍👍👍👍
Gear besar utk low speed rpm tidak masalah di proses di shaping mch asal profile gigi benar.
Nossa parabéns pelo feito realmente um trabalho de profissional . Tudo feito na marcação 👏🏻👏🏻👏🏻👏🏻👏🏻
Ada alat tambahannya g pak saat proses shapingnya?
Saya pikir cuma untuk meratakan dan buat alur saja mesin shapingnya pak...
Sangat berguna buat para pemula macam saya pak
Espectacular👏👏👏👏
Itu untuk menggeserkan benda kerjanya pake apa,rotari kah?selain gerakan otomatis mesinnya sendiri.
Mantap!
Is the gear blank a casting or a forging , nice work on the finished product.
casting not forging
when working time doesn't cost money.
- Not a serial manufacturing - only two gears at final. Anyway selling "old" machines to small factories is better way than just melt hem into a scrap.
I Love It!
Try to order this on the CNC, I wonder if they will be interested in you at all? Or will you break through the order queue? For a CNC machine of this size, the production queue is scheduled for months.
Приятно посмотреть на хорошую работу , на таком древнем станке.
👍👏👏👏
Vai temperar por indução?
Good
Kalau continious ada sekitar 4 hari siapnya pak ?
Salam 1 pahat
Kurang lebih pak
@@BudikaryaTeknik
Bekisar diatas 8 ongkosnya tu y pak
🤔
Pengen buka bengkel jg pak
Blm ada relasi sm modal
😂
Nice video, cool to see
Why arent you machining the bore of the gear?
Greetings from Netherlands
We did. But we forgot to take proper video of that process. 🙏
i'm laughing. i used to machine spur gears that the center hub alone was this size. 24 inch bore spur gears went to 180 inch diameters. 24-30 inch faces.. love machining big stuff.
Lokasi bengkel dimana bos?di +62 kah?
Kalo pake mesin hobbing emangnya ga bisa ya?
I would love to know how long did it take to create the finish beauty...
Cómo realizó cada giro de un siento con el divisor?
Create marking linenya pakai bantuan CAD atau yg ada software lain
Kami buat manual pak. Tapi bisa pakai bantuan CAD
Rumus y pak..
Ukuran mata pisau hss ny brp mm
Apa presisi kyk bgtu.ada proses finish lg tidak?
Tidak sebagus hasil langsung di hobbing
Apakah tidak di.grinding?
Parabéns
Can you tell us how many hours that took ?
About 40 hours for gear only
Nge - MAL profil.GIGI Nya pake apak pak?
Gambar pak
Ok
Full marks for ingenuity, but I would hate to see the results of a proper test for pitch and profile...
They've been doing this for 5 years, judging by the other videos. If the gears didn't work, their customers would have told them by now. Probably a fair bit a latitude at this size.
You have to keep in mind that is not space shuttle technology!! From my 55 years of machining experience I can say they did a great job:-))
@@paulwomack5866 customers had to do a lot of lapping and fitting i assure you
Gambar gear y pke manual apa mesi n om..
Dulu manual, skr pakai cnc
@@BudikaryaTeknik cara bikin marking y gmna om itunganya mau blajaran...
Excellent workmanship but labor intensive. Why not use the mill to cut the teeth? No cutter that size?
Yes. We dont have cutter that size
There is no way that is an accurate gear. What's the pitch to pitch error?
Дагоним и перегоним!
Kalau boleh tau dan kalau g' keberatan boleh lah saya minta rekomendasi atau saran dari bapak/mas yg bekerja di budi karya teknik ini .saya pengen tau aja ..mata pahat skrapnya buat sendiri atau beli di toko teknik ya..?? Soalnya saya lihat di video ini Enak aja gitu si mata pahatnya makan benda kerjanya , mulus dan rapi tanpa hambatan.. Saya baru pemula soalnya di dunia seni besi pak /mas..jd butuh banyak saran dan masukan dari para2 senior..
Terimakasih..🙏
Salam kenal pak/mas..🙏
Mata pahatnya beli lalu diasah sendiri
Boleh tau merk dan tipenya pak/mas..??
@@nurdiian91diian86 HSS biasa saja
Ohh HSS ya pak..ok lah pak kalau gitu terimakasih atas rekomendasinya..👍,
Smoga Sukses slalu pak..👍
Widia
Lokasi mana mas
Budikarya Teknik Jalan Pasundan No. 27, Sabandar, Karangtengah, Muka, Kec. Cianjur, Kabupaten Cianjur, Jawa Barat 43215 (0263) 262712 goo.gl/maps/adTc3gWZBzP2
Butuh waktu berapa lama pak untuk buat itu?
Sekitar 10 hr / pc
@@BudikaryaTeknik lama x mana cuan... Pakai hobing.. Itu kamu punya y31125 dipakai lah
@@wahidlie6814 nggak cuan, karena pisau modul belum ada dan order hanya 1. Kalau order ada 10 unit lebih untung pakai hobbing, biaya tools terbayar.
Nice vídeo!! How much time each teeth on shaper machine?
About 1~1.5 hours each teeth
modul berapa pak?
Modul 25
I think this is the size and kind of work that Abom79 - Adam Booth, would appreciate.
He can do better than us. His work is amazing 🙏
Why not make some hobbing machine
sometimes a hob might not have the correct profile. bastard sizes are prevalent on old equipment. the old timers would design the tooth profile in such a way that a buyer would have to return to the original supplier to get the correct part. grinding up a new hob for 1 0r 2 parts is not economically feasible- even if you can match up the tooth geometry.
Nice work but that casting is awful. Lots and lots of voids and defects
Yes casting was bad. Many porosity
@@BudikaryaTeknik thats why forgings are preferable for gearing.
Kebut biar jadi duit
lol all the holes and cracks in the metal. typical chinese quality
Grat job