1. Cycle the ignition to the "ON/RUN" position (Do not start the engine). 2. Fully depress the accelerator pedal and keep it fully depressed for at least 30 seconds. 3. Press and release the brake pedal six times while holding the accelerator pedal pressed. 4. Perform one ignition OFF-ON cycle, start the engine and verify that the reminder has been reset.
1. Cycle the ignition to the "ON/RUN" position (Do not start the engine).
2. Fully depress the accelerator pedal and keep it fully depressed for at least 30 seconds.
3. Press and release the brake pedal six times while holding the accelerator pedal pressed.
4. Perform one ignition OFF-ON cycle, start the engine and verify that the reminder has been reset.
Well bugger me. This method worked (the one in the manual didn't) on my MY12 Overland CRD Australian build. Thanks
This 30 sec method worked for me too. Thanks Australian Diamond
Worked thanks ,i tried the way jeep said about 50 times didn't work, did this once bingo worked .
Australian Diamond Information Channel Worked! Thanx!
Perfecto, este método me funcionó en G. C. Limited 3.0 2013
It worked!! 2013 jeep grand cherokee Laredo 4x4
it doesent work to my 2012 grand cherokee
yeah whatever, what about the ones without the push start?
it doesent work to my 2012 grand cherokee
Didnt work on my 2012 crd Australian model either. Did you work out how to do it?