Homemade compact and very simple 32T Hydraulic Press
HTML-код
- Опубликовано: 26 авг 2024
- So I built hydraulic press machine with 32 tons hydraulic bottle jack and u profile metal. For plans - width 60cm (23.6in), height 80cm (31.4in), thickness 15cm (6in). Working space about 35cm (14in). In future I will need to upgrade springs, current is too soft.
It's simple but very effective and by capacity is compact size.
►SUBSCRIBE
►LIKE
►SHARE
► Music - Jim Yosef - Firefly [NCS Release]
Thank you for watching
► GetWork ◄ 
Хобби
It's great how you made your own press and always fun and handy creating your own tools.
What I will say is just because you put a 32 Ton jack in it, does not mean that your design will handle the 32 tons. The U-Beam you put on the top will bend before you even get close.
If you had extra U-Beam material, putting 2 together and upright to create an I-beam would have been much stronger and could take that force.
Alternatively to strengthen your design, even boxing the middle of the top C-beam to help stabilize the beam flanges may help a little.
If you only use it for little things then no need to change anything but assuming you spent extra money on a big jack like that, you needed something with some power.
Very good thoughts 💪 but jack 10 - 30 tons only slight price difference and I use this press mostly for car chassis repairs so its plenty strong and super easy to pump it 😉
@@Work_G only for reference, a regular I-beam (the 100x55 mm version) with a length of 60 cm has a NOMINAL strength of about 24 tons in the middle. The 120x64 mm version can be loaded at about 31 tons. (These are not "official" calculations, only estimations tho.)
Thanks for actually showing the build and for the specs in the description! I can't tell you how many of these videos I've watched trying to get details but they were all just 'Look what I made!'
😊😅😊
I like that you brush painted it. Plenty of paint left for other projects and, no over spray on everything.
Yeah, all properties is better only down side surface is not so pretty.
Хорошая идея насадки фиксировать боковым винтом , а то многие делают на резьбе , что не удобно
Настолько мощная машина и супер домкрат тонн 100 спокойно . Фантазёр.
Excelente vídeo para alguien qué comienza con la técnica de soldar. Gracias por sus consejos.
Excelente trabajo . De seguro te ayudara mucho
The way of explaining well so anyone can understand how to make such as you.
I like it your way, keep it up and continue the other project
Thank You ❤
Muito boa ideia vou fazer uma pra mim obrigado por dividir seus conhecimentos 👏🏿👏🏿👏🏿
Muy bien. Muy fácil y bien detallado. Felicitaciones
Ну проще уже некуда, спасибо
Creo por la fuerza q va a hacer no debería ir soldado con 6013 sino 7018
What can I say?
Excellent condition , 👍 i take your technique idea!!!!
Thanks 😊
Sure, glad you got some inspiration
Is it a full 32 ton press? Who cares, it does the job and thats all that matters. Great job!!!
Thank You 🤗
Peut on vous en commander 1 sur mesure ?
Hola buen día maestro buen trabajo exelente herramienta de prensa para el taller quiero saber cuales son las medidas altura y ancho no se lo de herreria es la primera vez me gustaria que me mandara se lo agradeceré gracias saludos amigo cuidace y que mande mas de sus viendo desde México Cuernavaca Morelos
Идея не плохая ,но рама очень слаба , рабочая сторона у швеллера не эта , надо развернуть на 90 градусов .
Muy bien comunicado con los demás y bien inlustrido
I liked so much. A nice project. Good.
Thanks
All that work to crush a mobile phone, just hit it with a hammer........lol
Great job. In twenty years it will still be that strong.
No need for harbor freight warranty
Thank you a lot! Yes that was the reason why I decided to build one not just buy, I built size what I wanted, and only thing that can brake is jack, but that is easy to replace :)
Если можно,скиньте размеры всех швеллеров.
Y el molde para prensar coca de que medida son as otro video
Красавчик, твой проект больше понравился....
Um otimo trabalho bem reforçado
First of all too much welding i fabricated two of those and the only section that is welded is tbe cross beams at the top the rest is bolted and for the free movement of the hydraulic jack i use two shafts running through a 1" thick plate at the top and by the way there is nothing that he is going to remove or replace that needs that big jack but to each his own
Thanks for sharing and thanks for observations. Big jack make every job little bit easier I just got this because price different is not a significant.
Ciertamente la mejor prensa que he visto hasta ahora, construcción muy sencilla, excelente amigo.
Ok, that's not a 32 ton press. It's maybe a 4 ton press with a 32 ton bottle jack. No way that frame holds up to that kind of force.
The frame is ok and useful for many things, but you may as well save some money, time and weight, and put a 4 ton jack in it.
Bhai ye jack kanha milega
Central walla thiya to hai hi Nahin ismein kis chij par rakh kar kaam Karoge
Que buena esa herramienta, felicitaciones desde Argentina abrazos
Ok.beautiful
Красава, огонь, дешево и сердито!
great video Im in the middle of the same project myself but inly using a 4 ton bottle jack for the same reason, light automotive jobs.
Thanks..
Thank you and good luck!
Kya Issee smiling fain ukhada ja seta h
This will be my next project with my everlast welder. Everyone should have a good press.
Good luck!
Hi Great video do you know how to convert finger brake or a handbrake machine to hydraulic or air instead of manual? please let me know Thank you God bless you
Hello. Not sure, never done it
Que medida es la viga tipo u
Looks good 👍🏼💪
Thank you!
Good Very Easy 👍👍👍👍👍
Thanks a lot 😊
Great, I've been looking for something that can reduce the stress of making silage for my cows and i found this very useful. thanks alot
Your welcome! I am happy that helps!
How would this help with that
Me pasarias medidas de los fierros
Верхушку выгнет сразу и подвижная часть перестанет перемещаться. В таком положении швеллер не держит нагрузку. Надо с двух сторон 2 швеллера боком ставить. Какие тут 32 тонны. 5 тонного домкрата за глаза чтобы развалить сию конструкцию
ЭБСОЛЮТНО СОЛИДАРЕН!
Думаю что Вы правы . Для себя я чуть заморочился . Нажми на фото , оцени .
А если короб сварить из двух швеллеров? И таким образом усилить?
@@maverick2227 У меня 3 пластины на ребро , домкрат 20 тонн : ruclips.net/video/jM7DqJCiqAE/видео.html
@@Serggitto У меня просто нет таких пластин, а швеллер есть. Вот и думаю как правильно сделать, на бок два швеллера или коробом сварить? А размеры пресса не подскажите?
Верхнюю балку лучше коробчатого сечения
Ex ellent job..no bla bla..perfect..
Thank You so much!
what a nice glove, it resist heat
Beautiful welds
Thanks
Muito bom!!!
32 тонны для 140мм швеллера слишком много. при хорошей нагрузке они дугой прогнуться . нодо было чемто усилить
Пресс не плохой НО верхняя часть слабая, обезательно после 15 тонн порвёт всё нахер. У меня выгибало 2 100 швеллера вдоль на 30 тоннах, пришлось усилять в 100тые швеллеры вставить 8 швеллеры и стал полный порядок. А это один и поперёк, что сказать : СМЕРТНИК.
This project is very good!
Thank you
Como ajustar trasmisio chevette
Hey , greate idea dude
Can you please explain it uses
Means where it can be useful
Please 🙏
Hi! Thanks. It is mainly for car repairs just like pressing out old bearings and bushings than pressing in new ones. But also you can do whatever you need to - press, compress or crush.
I am a student of mechanical engineering
And I chose this topic as my second year project
Très beau travail 💥🤟👍et utile
GREAT JOB, THANKS!! .
Thank you for watching
Can i know about the dimensions of the frame please?!!.. I am planning to do my college project on this.. It ll be great if you share the details..
Sure, you can find that information in description
Super work and great learning👍.. Is it possible to measure the load during working?
Thank you! In in my case nope
Spring size? OD, wire diameter,
Хорошая работа👍
Well built & no shite music 👍👍👍👍👍👍👍
Thanks!
Why not fix that jack invert?? Is it possible
Yes, but now can if I need to take out jack from frame and use in different environment
how thick the metal is.???
Nice. I'm about to do something like this too
Thanks, and good luck!
good night !
I would like to know the purpose of these 2 springs
Springs hold bottle jack and middle moving metal part and returns to top.
Really bro.? you made 32t jack and you test only small bearing and phone hhha...anyway nice work....a very good build
Thank You It was just what I had laying around Btw 32t is not that much
Medidas cómo hacemos sin medidas
so where is your adjustable bottom support / table?
I didn't make that, because of metal amount and I am comfortable with putting pipes and other metal pieces to press out car bushings.
Buna ziua,mi ați putea da dimensiunile materialelor folosite?multumesc
God job.but that pres does not 32t capacity 10t maybe
Muy buen trabajo me gusta
Nice aidea
Thanks
what metal did you use?
Fantastic video and easy steps to easy learn
Thank You!
Конструкция рамы очень слабая для 32т. Основная нагрузка воспринимается верхней перемычкой, а она представляет собой один швеллер, уложенный на бок! Погнет всю раму при полной нагрузке. Вот тут я делал некоторые расчеты рамы: ruclips.net/video/g1_StTjo2Xk/видео.html
انت الأفضل. شكرا
Во телефоны раньше делали 😂👍
خوب است
Sir kong sakaling bilihin koyan magkano
Телефон можно было и ногой раздавить. Если только для этого, то пойдёт. Можно было и зачистить металл прежде чем варить. Короче культуру производства можно подтянуть. А так, для работы сойдёт.
Bessenah okoran berempah Nom???
Можно размеры швелера
You will never be able to reach 32 tons with that frame.. Look at a 30 ton press how much higher the upper and lower beams are. It will bend at half of that if not less... But still nice to have one!
Its no point to use all power for me, I dont have what to press with 32T. If I actually need that much I would builded it twice big and twice strong. But now its just for press out car bushings with no effort.
@@Work_G I agree with Erik. A 32ton press is a 32 ton press or not. In this case, it is just a 4 ton press with a 32 ton jack. Please, don't get me wrong, ok?
عملا رائع شكرا لك صديقك من بغداد
What is the cost?
Top channel placed horizontally won't take even a ton. Use steel sections properly . Channels do have a spine for a reason. If you want to use it for any other than crashing phones join two channels back to back to create an I-beam.
Thanks for advice, but for car suspension work it's plenty strong and I never had problems
আসসালামু আলাইকুম ভাই আমার একটা লাখবে বানিয়ে দিতে পারেন
То что вы взяли домкрат на 32 тонны это еще не значит что конструкция выдержит
Да и похуй, переделает конструкцию, предложили по сходной цене тоже на 32, хотел 20, запас мощности не помешает, а если прес не сможет, точно знаю кувалда поможет.
Но запресовывать кувалдой не советую, а просто запрещаю.
Quero ver o martelo pneomatico
I need to make one of these with my powerarc.
nice very simple
Thank You, that was my goal
cute...but apply 32 tons to it and it will fold...
Maybe, but for car suspension components pressing it is perfect, smooth and easy
Keren
Супер. Super 👍
Короткие отрезки швеллераинадо было поперëк повернуть. А то они только на сварке держаться....
Muito bom, parabéns
Bravooooooooo
Thanks!
Ты вместо телефона под пресс свой конец положил ....
Mughe pulr chahiya
Doesn’t even look like it could crush a can.
Thank you for feedback.
@@Work_G , there's always that 1 guy..., 😅🤣 #haters
@@JamesDavis-kp4ll Yes, unfortunately
Вместо три хоризонтални греди са достатъчни само две - горната и долната.