Really an amazing video. Thank you for your dedication that will help even generations in the future whom we hand these machines down to. I have the 328K that I bought for $40 cabinet and even all the plates and disks. Nothing missing..first time owner who passed away and I was the fortunate one who got be the next owner. Gettysburg PA. You’re a treasure with machine knowledge across the board. Thank you!
I have a 327K and a 328K and immediately thought "What? Straight stitch only?". But then the fact that I have recently been educated that this is not neccessarily a bad thing (guess who did the educating?) kicked in :-). I guess I have to change the belt in my machines, 'cause I most often have to start the handwheel by hand when I start sewing. Great video and thank you for sharing your vast amount of knowledge!
Many of these vintage models lack the proper belt tension when I get them. If it's too tight it really strains the motor, especially when first starting. The other thing I find on them is the foot controller has never been serviced and just needs a good cleaning and adjusting. I made a Playlist of videos for doing that and if you get bored someday you could take a look and see what you think. ruclips.net/p/PLsCOZgzzaiKL6ePPxLpmnWSzTyxPKTb71 Thanks for your nice comment and I appreciate you watching my channel.
Thank you so much for this amazing video. I recently discovered how much I love servicing older Singer sewing machines (I own a 221 and a 222). I thrifted a pristine 329 tonight and I can’t wait to get my hands all greasy while cleaning it. Your video will be most helpful!
Happy for you to get this fantastic model. A friend pestered me until I sold mine to him and I regret that I did. Have not found a replacement yet, but hope to. A marvelous machine for sure. Enjoy, than thanks for watching.
Мне нравится эта машинка. В машинках моделей 300-400 есть интересные и оригинальные конструктивные особенности. Замечательные машинки! Спасибо Вам! Здоровья и успехов!
I found one of these on the side of the road. My first restoration project. Mine has a green "hammered" finish. This model doesn't get anywhere near enough attention. It's a great machine. Reliable, no fuss, easy to use straight stitch machine. I believe Singer marketed it as a "lower" end machine, which means that it's head and shoulders above anything that's available on the market today. The large screw at the left end of the pitman arm was loose on mine and the machine rattled. I discovered that it's a reverse threaded screw.
What a fabulous find! Thanks for rescuing it.Yes, an underappreciated model, like the 404. Singer spent more to manufacture ZZ-capable machines and they cost more to make so they pushed them in their advertising and stores. There was enough demand, even into the 1960s that they still made models like the 329K. My wife has been sewing for 50+ years and uses a straight stitch 301A, even for knit fabrics. She did buy an edger to finish some seams in the late 1970's
@@andytubesewing1953 It really was a fabulous find and it got me started on a fabulous hobby. Part of my restoration project on this machine was to refurbish the original button foot pedal. I followed your videos on how to do it. Took it completely apart, cleaned the carbon disks, put it back together and was able to achieve perfect stitch-by-stich control. You're the one who needs to be thanked for the rescue of this machine, along with the rescue of another 8 machines and the repair of a neighbour's Bernina and a Featherweight. So thank you Andy.
@@r.duroucher225 I appreciate your kind words. What you've done is help me justify the time and effort I have spent on this channel. I could not agree more that it is a fabulous hobby. If I got you "hooked" on something, at least it is fun and mostly harmless 😀God Bless, and take care.
I just want to thank you for making this super informative video. This video combined with a very brief skim through of the instruction manual (that I found online😊) helped me get my singer 329k cleaned, oiled, threaded, and working beautifully! I really appreciate how thorough you are in your explanations and the helpful close up photos you included! I haven't used a sewing machine since middle school so this was super helpful.
Well, I have a lot of experience with what can go wrong 😀I used to get upset, but now I get a laugh and try to let folks know. Thanks for watching my channel.
Yep done that foot left UP. I now always just sew a few stitches and check as a habit. Also my other habit is to check how much bottom bobbin thread there is, I once was sewing a garden furniture cover 3 ft long with no bobbin thread ;-)) bobbin was full BUT it was in the vintage machine when I bought it; further investigation there was 7 colours of thread on that bobbin ;-)) My wife's brother fs40 will not let you sew with the foot up. Paper towel is the best thing to test on since it is easier to free up a jamb especially when adjusting the hook timing. all the best
Some great tips, thank you. I feel a little less stupid now, haha. I think 7 colors of thread is a record? The most I found was 4. I LOL at you sewing the 3 FT. Thanks for sharing and watching.
Thanks so much for doing a 329K video. I have had this machine for a couple or few years and really like it, I got mine at a Habitat for Humanity store. For some reason a lot of people put down this machine which makes no sense to me, its an all metal machine, has a tough finish on it and works great. So glad your back and keep up the good work!
I'm with you! It's a wonderful machine. It was the striking style and finish that caught my eye at the auction. While restoring it I came to love it. Yes, a very tough finish, hard and scratch-resistant. All metal and a strong performer. When companies started making ZZ models these straight stitch machins started falling out of favor. They pushed their ZZ models to the max. People came to feel a straight stitch only machine was somehow "lesser", "cheaper", and not made as well forgetting that for 100 years straight stitch machines made all the clothes, bags, curtains, bedspreads, scarfs, shoes, etc. My wife has been sewing for 55+ years now and although she has a beautiful 403A she seldom uses it preferring her 301A. She did finally buy an edger (serger) to save time sewing gowns, drapes, and other large items. She can sew knit and double-knit fabrics just fine with that 301A, no worries. IMO, you picked up one of the better home machines made by Singer. I appreciate you watching my channel, and thanks for the comment.
Hi Andy! This machine tour is fascinating. I love the shape of the light. It really seems like a straight forward, no nonsense, heavy duty machine. Thanks for taking the time keep us in the know! Hope you and yours are all doing well ❤
That's a very nice machine. I sold it after I restored it and now I wish I hadn't. I'm glad you found the videos and congratulations on your new machine.
I wish that the 404 came with that motor and drive. Nice, concise video on the 329K. I already looked on Ebay and there's a couple there. I'll keep my 503 and 404 but that 329 is a great looking machine. Thanks for posting.
The more I worked on this 329K the more I liked it. Something about the front styling is unique and attractive. The arm looks thinner but measures the same width as the 32&K & 328K do. I guess it looks so sleek b/c there are no controls on the front. I do wish it was a slant needle, but I can't complain about how much denim I got under the foot. I appreciate you watching, Raph, and the comments you share.
Thank you for another very thorough tutorial. I regularly switch to another video after ten or twenty minutes, but with your channel, I quite often watch everything to the end! You have saved me a lot of grief working on my 401A. I am currently working on a 404 that I wasn't sure I would keep, but after hearing your opinion, I am keeping it. Note: At 1:05:00, when you put it in bobbin winding mode, the needle/feed dog seemed to be engaged. Again, thank you very much and hope you are feeling well.
Thank you. Yes, please keep the 404, at least for a while to see if you agree. You have a good eye for detail with spotting the moving NB. I did not notice it while recording but saw it during editing. When I'm putting the handwheel back on the counter balance I have a habit of putting a little oil on the counterbalance before sliding the handwheel back on. When I put too much the wheel will stick to the counterbalance for a while. I just went back to test it and I wiped off the counterbalance and put one drop of oil, spread with my fingertip. That fixed the "creeping needle bar" problem. I only work on the machines now on good days and for a short time. I just decided to leave the original recording when editing, thinking "no one will notice that", haha. Busted by mseller 😀 I appreciate that you watch my videos that closely. Take care.
Just a pipe dream I had when seeing the casting at the bottom. Neither the Parts nor Service Manuals for the 327K/328K/329K show parts or info for using them in a treadle. Maybe the body was used on other machines that could be setup to treadle? Thanks for watching my channel.
Great to see another video from you Andy. I got hold of one of these but sadly it was too far gone. I kept bits off it in case I ever get hold of another one. I also got hold of an early model 328K which is a real beauty and a lovely machine to sew on.
I have a bid on a 328K at GWill. No one else has bid yet. I think it's b/c the listing says "For Parts or Repair", hehe. Just my type of machine, haha. I did a 327K before, then found this 329K and really enjoyed it. I figured I might as well get the sister 328K for the trifecta of these SyleMates. Thanks for watching, and take care.
i recently bought a Singer 329J - the J means that it was made in Canada. It's in wonderful shape, just serviced, rewired, new pedal. Great stitches and I purchased the plate that covers the feed dogs for free motion quilting. She's been named The Beast cause it'll go through anything.
Yes, the Singer Factory in St. John's, Quebec, Canada. They were at their peak employment of 3K workers when your machine was made. You're fortunate to find such a nice one. COngratulations.
I was getting frustrated because I couldn't find any real info on the machine. Everything focused on the 327/328 models. Was happy to see your video. Thank you.@@andytubesewing1953
Nice one Andy, very informative she sounds nice. currently working on a singer 427 that i got for £5, been in the family all its life, but has a Brocken top gear. probably been put away for many years. hope you are getting good treatment stay well all the best to you and family. (wet morning in Liverpool ) best regards Trevor..
Thank you, Trevor. I found pix of the 427 online (they were not sold here) It looks like the 457K and I wonder if the mechanics are the same. The models of that decade are known to have broken gears now. I had dozens of requests about replacing that top gear so I made a video: ruclips.net/video/M3bFtlV1Y6s/видео.html I added Liverpool to my weather app a while back. I check a few cities each morning with my coffee. I can dream of a cooler place while I'm sitting in 32C sunrise. Cool, rainy weather 🌧 sounds like a treat to me after 54 days over 110F Congratulations on your L5 beauty; I know you'll get ti purring along.
I watched Andy replacing the top gear on a 457. I ordered a top gear, replaced it no problem. I had a problem getting the timing right after replacing the gear. Still working great so worthwhile replacing the plastic gear. Good luck
This series of machine is often called The Tractor, reflecting the slight noisiness and the ability to sew heavier fabrics. And the solid reliability. I have some 328Ks and they work remarkably well on a range of fabrics. Very easy machines to use.
thanks for the tour, very informative. Great to find out more about my machine. I wanted to replace the light with an led bayonet, but it didn't fit. Tried two brands.
If you're ever needing a new video idea, I'd love to see you make one about cleaning and oiling this machine after it's been sitting for about 20-30 years. I found LOADS of lint under the bobbin case. You truly get to know a machine when you take it apart 😂
This beautiful 329K was donated shortly after making the video. I did make some videos for its sibling model, a 327K. While the 329K is straight stitch only, the 327K has ZIgZag capabilities. Other than the camstack and driving arm the other parts are the same. Here is the Playlist for the 327K if you are interested: ruclips.net/p/PLsCOZgzzaiKKHFzTFVJrwVQT6hMfXxFHt Thanks for watching my channel and take care.
Have been looking at your vids today. Love how you name your machines. What is this one’s name? I have several mid-century Singers. I think I will start naming mine as well. Most need a little work. Finding someone to entrust the work to is a problem. There is no one who works on machines within 70 miles of me. It is a lost skill set I am afraid. Glad you are posting videos.
I have not gotten a feel for its name yet. I'm still getting to know it I guess. I like the machine, how it looks and sews, a lot. It's sitting on an eye-level shelf watching me each day. Maybe it will share its name soon. May I share a link to my Playlist page with you? www.youtube.com/@andytubesewing1953/playlists?view=50&sort=dd&shelf_id=1 The Playlists are listed by model number. If I have a Playlist for a/some of the models you own you may be interested. Most people can do their own maintenance and repairs. I try to cover many of the requirements. I appreciate your comment and thanks for watching my channel.
Oh Andy - what an excellent video this is. Thank you - all those close-ups and editing must have taken ages. You won't be the first to leave the presser foot by mistake when working on lots of thick layers, it can be hard to tell without checking the lifter whether it's up, or just held up by the layers. I think your machine would have handled the 9 layers too, it looks more like it was the needle that wasn't quite up to it rather than the machine... :-)
Thanks for watching, Megan. I just used a regular denim needle. Trying that many layers I should have used a Heavy Duty one with a thicker shaft. The problem is the fabric is so thick that the needle is still in it when the dog starts moving it, and that bent the tip right off. It's fun trying even though no one would ever sew that many layers. Peace and Health in New Zealand.
Hi Andy, I enjoyed watching this video…always learning something! Wondering if you may know anyone in the Sacramento, Ca area that works on Singer 327K? Was going well and now stitching is a mess. Thanks for all your great videos !💕💃🏻
Sorry, the only person I knew in the area has passed. I can recommend 3 videos to do with model 327K that may give you some insight. 1> TENSION: ruclips.net/video/d4k2wlDFsj0/видео.html 2> THREAD GAP: ruclips.net/video/fq_1qRQFM_Y/видео.html 3> BOBBIN CASE: ruclips.net/video/HT5XZ5eYYEQ/видео.html Thanks for watching my channel
Hi Andy, I found recently bought a 329k Singer machine. Tension was terrible, I watched your video about tension and realized that my tension thing a majig was not the same, but I did see your video on the 404 series 14E and it looked the same as the one I have on the 329k, I watched it paused took it apart cleaned as you suggested and put it back together. Low and behold, the tension works BEAUTIFULLY.....I can't thank you enough. So happy to have found your channel !! I do have one question, do you know if an inline switch can be installed on the plug wire, so that it does not have to be unplugged all the time ?? LOVE YOUR CHANNEL !!!
Thank you. I'm glad the tension video helped you get your thing a majig sorted out 😉Sure, you can put an inlide switch. The cost is nominal and it's easy to install. If you took the cord with you a neighborhood hardware store might do it free if you bought the switch there. Your machine uses less than 1Amp of power. Here is the 3A switch I like to use: www.leviton.com/en/products/5410 I bought mine at an ACE Hardware down the road for $7.
Can you tell me which light bulb the 329 takes? I heard you mention bayonet style, but is there a specific model number? The machine I bought does not have a bulb in it, and I haven’t seen the information in the online manuals I’ve seen. Thank you.
It's called a push-in style. vs one with threads on the base to screw in. Most vintage Singers use it. Like this: singer-featherweight.com/products/light-bulb-push-in-base?variant=9015109891#productExtendedDetails Please consider buying an LED bulb. More light and no heat: singer-featherweight.com/products/light-bulb-led?variant=9015049667 Here is a video about installing one ruclips.net/video/uMK6jsQHoeY/видео.html
Hi Andy. Thank you very much for this video. The 329K is very attractive design to me. Now, you’ve sent me on an internet voyage. I’m doing comparisons between the 327K, 328K, and 329K, and I have a question for you. Is the arm cover on a 327K plastic or metal? You affirm the lid on the arm cover of the 329K is aluminum. I have a 328K and I know the lid is aluminum, too. I have rewatched your videos on the 327K (the Spartan), and I can’t find anyplace where you mention what the arm cover is made of (I’m just skimming around your videos here, so I may have missed it if you mentioned it). Since you have actually handled a 327K, you would know. Some other You Tubes I’ve watched say that the arm cover is plastic for the 327K, but I’m not so sure.
My 327K was a Spartan version; made more simple to reduce cost a little bit. The arm cover was plastic, for sure. The Singer badged 327K was a little more equipped as it had a light switch for example. I only saw one, but believe it did have a plastic cover. The 327K was a "Basic" zigzag machine with one pattern disc screwed onto the disc drive, the 328K was the top of the line for this family with a metal arm cover and a big chrome thumb nut and flip-up door to change to any of the over 20+ Type A (flat) pattern discs. The 329K was the straight stitch only machine, a little on the heavy-duty side to stand up well under heavier sewing. I think that's why they gave it the metal arm cover, too. I love the way the 329K looks all around, especially the treatment they gave the lamp cover and front side. They kept the backside with a similar style too, which surprised me. It had its own molds for casting. A very nice model, IMO.
Thanks for all the information! It’s interesting to know they made a new body mold for the 329K; it is very stylish, both front and back, and I really like the color.@@andytubesewing1953
@@carolemagnusson5044 You're always welcome Carole. I always look forward to your comments, questions and observations. I'm so happy you still watch my channel
Sorry to hear that, Charlene. If it actually gets caught "in" the bobbin you may have a class 15 bobbin in it instead of a class 66. Class 15 is taller and the thread can't glide over it. If it tangled at the right bottom corner of the bobbin case the Thread Clearance Gap may be too narrow and pinch the thread there. Once one loop gets caught all the ones behind it just stack up on it. I've had to adjust a few of them. Here is the video I made about it for model 327K which has the same system. You might take a look at it and see what you think. ruclips.net/video/fq_1qRQFM_Y/видео.html Thanks for watching my channel.
Great to see a video on the 329k, Andy. Mine has an incredibly loud rattle from the bobbin case hitting the spring. Is this normal? Or is there a way to mitigate this? Thanks!
Thanks for asking. The space between the bobbin case corner and the spring is called the "Thread Clearance" and it is adjustable If the space is too narrow the thread can hang there and get bird-nested. If it's too wide you get a lot of Clacking/Rattleing. Here is a video for adjusting the clearance on Models 327, 328, and 329. ruclips.net/video/fq_1qRQFM_Y/видео.html Best of luck and happy sewing.
I don't own a 329, but you're a treasure to the community and I appreciate you taking the time to make these videos. Thanks for doing it.
Thank you very much, Vito. I appreciate you watching my channel.
Really an amazing video. Thank you for your dedication that will help even generations in the future whom we hand these machines down to. I have the 328K that I bought for $40 cabinet and even all the plates and disks. Nothing missing..first time owner who passed away and I was the fortunate one who got be the next owner. Gettysburg PA. You’re a treasure with machine knowledge across the board. Thank you!
Wow, what a find for $40. Congrats! I appreciate your kind comment. Happy sewing.
I have a 327K and a 328K and immediately thought "What? Straight stitch only?". But then the fact that I have recently been educated that this is not neccessarily a bad thing (guess who did the educating?) kicked in :-).
I guess I have to change the belt in my machines, 'cause I most often have to start the handwheel by hand when I start sewing.
Great video and thank you for sharing your vast amount of knowledge!
Many of these vintage models lack the proper belt tension when I get them. If it's too tight it really strains the motor, especially when first starting. The other thing I find on them is the foot controller has never been serviced and just needs a good cleaning and adjusting.
I made a Playlist of videos for doing that and if you get bored someday you could take a look and see what you think. ruclips.net/p/PLsCOZgzzaiKL6ePPxLpmnWSzTyxPKTb71 Thanks for your nice comment and I appreciate you watching my channel.
Thank you so much for this amazing video. I recently discovered how much I love servicing older Singer sewing machines (I own a 221 and a 222). I thrifted a pristine 329 tonight and I can’t wait to get my hands all greasy while cleaning it. Your video will be most helpful!
Happy for you to get this fantastic model. A friend pestered me until I sold mine to him and I regret that I did. Have not found a replacement yet, but hope to. A marvelous machine for sure. Enjoy, than thanks for watching.
had to watch it again to refresh my memory . thanks Andy..
I appreciate that you still watch. Have a nice spring
Мне нравится эта машинка. В машинках моделей 300-400 есть интересные и оригинальные конструктивные особенности. Замечательные машинки! Спасибо Вам! Здоровья и успехов!
Мне очень понравилась эта модель. Прекрасно спроектирован и хорошо сделан. Спасибо за просмотр.
I found one of these on the side of the road. My first restoration project. Mine has a green "hammered" finish. This model doesn't get anywhere near enough attention. It's a great machine. Reliable, no fuss, easy to use straight stitch machine. I believe Singer marketed it as a "lower" end machine, which means that it's head and shoulders above anything that's available on the market today.
The large screw at the left end of the pitman arm was loose on mine and the machine rattled. I discovered that it's a reverse threaded screw.
What a fabulous find! Thanks for rescuing it.Yes, an underappreciated model, like the 404. Singer spent more to manufacture ZZ-capable machines and they cost more to make so they pushed them in their advertising and stores. There was enough demand, even into the 1960s that they still made models like the 329K. My wife has been sewing for 50+ years and uses a straight stitch 301A, even for knit fabrics. She did buy an edger to finish some seams in the late 1970's
@@andytubesewing1953 It really was a fabulous find and it got me started on a fabulous hobby. Part of my restoration project on this machine was to refurbish the original button foot pedal. I followed your videos on how to do it. Took it completely apart, cleaned the carbon disks, put it back together and was able to achieve perfect stitch-by-stich control. You're the one who needs to be thanked for the rescue of this machine, along with the rescue of another 8 machines and the repair of a neighbour's Bernina and a Featherweight. So thank you Andy.
@@r.duroucher225 I appreciate your kind words. What you've done is help me justify the time and effort I have spent on this channel. I could not agree more that it is a fabulous hobby. If I got you "hooked" on something, at least it is fun and mostly harmless 😀God Bless, and take care.
I just want to thank you for making this super informative video. This video combined with a very brief skim through of the instruction manual (that I found online😊) helped me get my singer 329k cleaned, oiled, threaded, and working beautifully! I really appreciate how thorough you are in your explanations and the helpful close up photos you included! I haven't used a sewing machine since middle school so this was super helpful.
Very welcome, and thanks for the nice comment. Happy sewing.
Thanks for showing what can go wrong. It's always more helpful for me to see that side of operations. 😁
Well, I have a lot of experience with what can go wrong 😀I used to get upset, but now I get a laugh and try to let folks know. Thanks for watching my channel.
Yep done that foot left UP. I now always just sew a few stitches and check as a habit.
Also my other habit is to check how much bottom bobbin thread there is, I once was sewing a garden furniture cover 3 ft long with no bobbin thread ;-))
bobbin was full BUT it was in the vintage machine when I bought it; further investigation there was 7 colours of thread on that bobbin ;-))
My wife's brother fs40 will not let you sew with the foot up.
Paper towel is the best thing to test on since it is easier to free up a jamb especially when adjusting the hook timing.
all the best
Some great tips, thank you. I feel a little less stupid now, haha. I think 7 colors of thread is a record? The most I found was 4. I LOL at you sewing the 3 FT. Thanks for sharing and watching.
Thanks so much for doing a 329K video. I have had this machine for a couple or few years and really like it, I got mine at a Habitat for Humanity store. For some reason a lot of people put down this machine which makes no sense to me, its an all metal machine, has a tough finish on it and works great. So glad your back and keep up the good work!
I'm with you! It's a wonderful machine. It was the striking style and finish that caught my eye at the auction. While restoring it I came to love it. Yes, a very tough finish, hard and scratch-resistant. All metal and a strong performer. When companies started making ZZ models these straight stitch machins started falling out of favor. They pushed their ZZ models to the max. People came to feel a straight stitch only machine was somehow "lesser", "cheaper", and not made as well forgetting that for 100 years straight stitch machines made all the clothes, bags, curtains, bedspreads, scarfs, shoes, etc. My wife has been sewing for 55+ years now and although she has a beautiful 403A she seldom uses it preferring her 301A. She did finally buy an edger (serger) to save time sewing gowns, drapes, and other large items. She can sew knit and double-knit fabrics just fine with that 301A, no worries. IMO, you picked up one of the better home machines made by Singer. I appreciate you watching my channel, and thanks for the comment.
This is actually a beautiful little machine. Excellent video ! Thank you
I agree and thank you. I regret selling it and if I find another I'll snatch it right up. I appreciate you watching.
Hi Andy! This machine tour is fascinating. I love the shape of the light. It really seems like a straight forward, no nonsense, heavy duty machine. Thanks for taking the time keep us in the know! Hope you and yours are all doing well ❤
thanks for the nice comment, Jodie. I appreciate you watching my channel.
Hey Andy, nice to hear you.. nice video, very thorough as always.. ❤
🙏 thank you
Great to hear you again 😊
🙏 I'm pleased you still watch my channel. Thanks you.
Thank you for these incredibly helpful videos. I purchased a 329K last year and am just getting around to cleaning it and getting it ready to use.
That's a very nice machine. I sold it after I restored it and now I wish I hadn't. I'm glad you found the videos and congratulations on your new machine.
Andy! That was a very informative segment on how to deal with a common mistake...
Thank you for watching. I appreciate your comment
I wish that the 404 came with that motor and drive. Nice, concise video on the 329K. I already looked on Ebay and there's a couple there. I'll keep my 503 and 404 but that 329 is a great looking machine. Thanks for posting.
The more I worked on this 329K the more I liked it. Something about the front styling is unique and attractive. The arm looks thinner but measures the same width as the 32&K & 328K do. I guess it looks so sleek b/c there are no controls on the front. I do wish it was a slant needle, but I can't complain about how much denim I got under the foot. I appreciate you watching, Raph, and the comments you share.
Thank you for another very thorough tutorial. I regularly switch to another video after ten or twenty minutes, but with your channel, I quite often watch everything to the end! You have saved me a lot of grief working on my 401A. I am currently working on a 404 that I wasn't sure I would keep, but after hearing your opinion, I am keeping it. Note: At 1:05:00, when you put it in bobbin winding mode, the needle/feed dog seemed to be engaged.
Again, thank you very much and hope you are feeling well.
Thank you. Yes, please keep the 404, at least for a while to see if you agree. You have a good eye for detail with spotting the moving NB. I did not notice it while recording but saw it during editing. When I'm putting the handwheel back on the counter balance I have a habit of putting a little oil on the counterbalance before sliding the handwheel back on. When I put too much the wheel will stick to the counterbalance for a while. I just went back to test it and I wiped off the counterbalance and put one drop of oil, spread with my fingertip. That fixed the "creeping needle bar" problem. I only work on the machines now on good days and for a short time. I just decided to leave the original recording when editing, thinking "no one will notice that", haha. Busted by mseller 😀 I appreciate that you watch my videos that closely. Take care.
Wow! I made a comment and received another great tip. Thanks and you take care as well.
Very good video. I would love to see a 329 in a treadle.
Just a pipe dream I had when seeing the casting at the bottom. Neither the Parts nor Service Manuals for the 327K/328K/329K show parts or info for using them in a treadle. Maybe the body was used on other machines that could be setup to treadle?
Thanks for watching my channel.
Thank you so much.
Welcome and good luck.
Great to see another video from you Andy. I got hold of one of these but sadly it was too far gone. I kept bits off it in case I ever get hold of another one. I also got hold of an early model 328K which is a real beauty and a lovely machine to sew on.
I have a bid on a 328K at GWill. No one else has bid yet. I think it's b/c the listing says "For Parts or Repair", hehe. Just my type of machine, haha. I did a 327K before, then found this 329K and really enjoyed it. I figured I might as well get the sister 328K for the trifecta of these SyleMates. Thanks for watching, and take care.
@@andytubesewing1953 Fingers crossed that you win the bidding on it Andy.
i recently bought a Singer 329J - the J means that it was made in Canada. It's in wonderful shape, just serviced, rewired, new pedal. Great stitches and I purchased the plate that covers the feed dogs for free motion quilting. She's been named The Beast cause it'll go through anything.
Yes, the Singer Factory in St. John's, Quebec, Canada. They were at their peak employment of 3K workers when your machine was made. You're fortunate to find such a nice one. COngratulations.
I was getting frustrated because I couldn't find any real info on the machine. Everything focused on the 327/328 models. Was happy to see your video. Thank you.@@andytubesewing1953
Nice one Andy, very informative she sounds nice. currently working on a singer 427 that i got for £5, been in the family all its life, but has a Brocken top gear. probably been put away for many years. hope you are getting good treatment stay well all the best to you and family. (wet morning in Liverpool ) best regards Trevor..
Thank you, Trevor. I found pix of the 427 online (they were not sold here) It looks like the 457K and I wonder if the mechanics are the same. The models of that decade are known to have broken gears now. I had dozens of requests about replacing that top gear so I made a video: ruclips.net/video/M3bFtlV1Y6s/видео.html I added Liverpool to my weather app a while back. I check a few cities each morning with my coffee. I can dream of a cooler place while I'm sitting in 32C sunrise. Cool, rainy weather 🌧 sounds like a treat to me after 54 days over 110F Congratulations on your L5 beauty; I know you'll get ti purring along.
I watched Andy replacing the top gear on a 457. I ordered a top gear, replaced it no problem. I had a problem getting the timing right after replacing the gear. Still working great so worthwhile replacing the plastic gear. Good luck
This series of machine is often called The Tractor, reflecting the slight noisiness and the ability to sew heavier fabrics. And the solid reliability. I have some 328Ks and they work remarkably well on a range of fabrics. Very easy machines to use.
Thanks for sharing. The name tractor seems appropriate with that bell crank hook sound. I appreciate you watching
thanks for the tour, very informative. Great to find out more about my machine. I wanted to replace the light with an led bayonet, but it didn't fit. Tried two brands.
singer-featherweight.com/products/light-bulb-led?variant=9015049667
If you're ever needing a new video idea, I'd love to see you make one about cleaning and oiling this machine after it's been sitting for about 20-30 years. I found LOADS of lint under the bobbin case. You truly get to know a machine when you take it apart 😂
This beautiful 329K was donated shortly after making the video. I did make some videos for its sibling model, a 327K. While the 329K is straight stitch only, the 327K has ZIgZag capabilities. Other than the camstack and driving arm the other parts are the same. Here is the Playlist for the 327K if you are interested:
ruclips.net/p/PLsCOZgzzaiKKHFzTFVJrwVQT6hMfXxFHt
Thanks for watching my channel and take care.
Have been looking at your vids today. Love how you name your machines. What is this one’s name? I have several mid-century Singers. I think I will start naming mine as well. Most need a little work. Finding someone to entrust the work to is a problem. There is no one who works on machines within 70 miles of me. It is a lost skill set I am afraid. Glad you are posting videos.
I have not gotten a feel for its name yet. I'm still getting to know it I guess. I like the machine, how it looks and sews, a lot. It's sitting on an eye-level shelf watching me each day. Maybe it will share its name soon. May I share a link to my Playlist page with you?
www.youtube.com/@andytubesewing1953/playlists?view=50&sort=dd&shelf_id=1 The Playlists are listed by model number. If I have a Playlist for a/some of the models you own you may be interested. Most people can do their own maintenance and repairs. I try to cover many of the requirements. I appreciate your comment and thanks for watching my channel.
Oh Andy - what an excellent video this is. Thank you - all those close-ups and editing must have taken ages. You won't be the first to leave the presser foot by mistake when working on lots of thick layers, it can be hard to tell without checking the lifter whether it's up, or just held up by the layers. I think your machine would have handled the 9 layers too, it looks more like it was the needle that wasn't quite up to it rather than the machine... :-)
Thanks for watching, Megan. I just used a regular denim needle. Trying that many layers I should have used a Heavy Duty one with a thicker shaft. The problem is the fabric is so thick that the needle is still in it when the dog starts moving it, and that bent the tip right off. It's fun trying even though no one would ever sew that many layers. Peace and Health in New Zealand.
Hi Andy, I enjoyed watching this video…always learning something! Wondering if you may know anyone in the Sacramento, Ca area that works on Singer 327K? Was going well and now stitching is a mess. Thanks for all your great videos !💕💃🏻
Sorry, the only person I knew in the area has passed. I can recommend 3 videos to do with model 327K that may give you some insight. 1> TENSION: ruclips.net/video/d4k2wlDFsj0/видео.html 2> THREAD GAP: ruclips.net/video/fq_1qRQFM_Y/видео.html 3> BOBBIN CASE:
ruclips.net/video/HT5XZ5eYYEQ/видео.html Thanks for watching my channel
Thank you very much for all your help. I will watch the videos(again) . If I find someone here who can service my machine,I will leave a comment.
@@chilipeprsandi ok and good luck
Hi Andy, I found recently bought a 329k Singer machine. Tension was terrible, I watched your video about tension and realized that my tension thing a majig was not the same, but I did see your video on the 404 series 14E and it looked the same as the one I have on the 329k, I watched it paused took it apart cleaned as you suggested and put it back together. Low and behold, the tension works BEAUTIFULLY.....I can't thank you enough. So happy to have found your channel !! I do have one question, do you know if an inline switch can be installed on the plug wire, so that it does not have to be unplugged all the time ?? LOVE YOUR CHANNEL !!!
Thank you. I'm glad the tension video helped you get your thing a majig sorted out 😉Sure, you can put an inlide switch. The cost is nominal and it's easy to install. If you took the cord with you a neighborhood hardware store might do it free if you bought the switch there. Your machine uses less than 1Amp of power. Here is the 3A switch I like to use: www.leviton.com/en/products/5410
I bought mine at an ACE Hardware down the road for $7.
Thank You So very much !!! @@andytubesewing1953
Can you tell me which light bulb the 329 takes? I heard you mention bayonet style, but is there a specific model number? The machine I bought does not have a bulb in it, and I haven’t seen the information in the online manuals I’ve seen.
Thank you.
It's called a push-in style. vs one with threads on the base to screw in. Most vintage Singers use it. Like this: singer-featherweight.com/products/light-bulb-push-in-base?variant=9015109891#productExtendedDetails Please consider buying an LED bulb. More light and no heat: singer-featherweight.com/products/light-bulb-led?variant=9015049667
Here is a video about installing one ruclips.net/video/uMK6jsQHoeY/видео.html
Hi Andy. Thank you very much for this video. The 329K is very attractive design to me. Now, you’ve sent me on an internet voyage. I’m doing comparisons between the 327K, 328K, and 329K, and I have a question for you. Is the arm cover on a 327K plastic or metal? You affirm the lid on the arm cover of the 329K is aluminum. I have a 328K and I know the lid is aluminum, too. I have rewatched your videos on the 327K (the Spartan), and I can’t find anyplace where you mention what the arm cover is made of (I’m just skimming around your videos here, so I may have missed it if you mentioned it). Since you have actually handled a 327K, you would know. Some other You Tubes I’ve watched say that the arm cover is plastic for the 327K, but I’m not so sure.
My 327K was a Spartan version; made more simple to reduce cost a little bit. The arm cover was plastic, for sure. The Singer badged 327K was a little more equipped as it had a light switch for example. I only saw one, but believe it did have a plastic cover. The 327K was a "Basic" zigzag machine with one pattern disc screwed onto the disc drive, the 328K was the top of the line for this family with a metal arm cover and a big chrome thumb nut and flip-up door to change to any of the over 20+ Type A (flat) pattern discs. The 329K was the straight stitch only machine, a little on the heavy-duty side to stand up well under heavier sewing. I think that's why they gave it the metal arm cover, too. I love the way the 329K looks all around, especially the treatment they gave the lamp cover and front side. They kept the backside with a similar style too, which surprised me. It had its own molds for casting. A very nice model, IMO.
Thanks for all the information! It’s interesting to know they made a new body mold for the 329K; it is very stylish, both front and back, and I really like the color.@@andytubesewing1953
@@carolemagnusson5044 You're always welcome Carole. I always look forward to your comments, questions and observations. I'm so happy you still watch my channel
@andytubesewing1953 always so informative, glad to see you are back to your Channel!
I have 2 of these machines on one of them the top thread gets caught in the bobbin. I can't figure out what's wrong.
Sorry to hear that, Charlene. If it actually gets caught "in" the bobbin you may have a class 15 bobbin in it instead of a class 66. Class 15 is taller and the thread can't glide over it. If it tangled at the right bottom corner of the bobbin case the Thread Clearance Gap may be too narrow and pinch the thread there. Once one loop gets caught all the ones behind it just stack up on it. I've had to adjust a few of them. Here is the video I made about it for model 327K which has the same system. You might take a look at it and see what you think. ruclips.net/video/fq_1qRQFM_Y/видео.html Thanks for watching my channel.
@@andytubesewing1953 I have the class 66 in it. I will check your video out because it is stacking up. Thank you.
@@charleneweege7149 I hope it helps you resolve it. Good Luck.
Great to see a video on the 329k, Andy. Mine has an incredibly loud rattle from the bobbin case hitting the spring. Is this normal? Or is there a way to mitigate this? Thanks!
Thanks for asking. The space between the bobbin case corner and the spring is called the "Thread Clearance" and it is adjustable
If the space is too narrow the thread can hang there and get bird-nested. If it's too wide you get a lot of Clacking/Rattleing.
Here is a video for adjusting the clearance on Models 327, 328, and 329. ruclips.net/video/fq_1qRQFM_Y/видео.html
Best of luck and happy sewing.
@@andytubesewing1953 amazing, thanks Andy for your help. Have a great day