How easy is it to program channels into the Hiroyasu? I find the software, grab a standard USB C connector cable and show you! Software can be found here: hamradiolife.or...
TOA (Transmit Overtime Alarm) function With the TOA function enabled, when the TOT function is active and the radio reaches arrives within the preset transmission time limit (TOT), you will hear a sound of alarm. There are 10 levels of TOA, with 1 second of separation between one and the other. If you set level 1, you will hear the tone alarm 1 second before the end of the transmission; setting level 2 you will hear a warning tone 2 seconds before the end of the transmission and so on right away.
The click isn't between UHF and VHF - it's clicking between the A transceiver and B Transceiver. I hear the click even if both are set to frequencies on the UHF band.
Channel programming: - Press * on the microphone or V/M on the radio to select "frequency" mode (only displays VFO frequency) - program the frequency and offset, CTCSS codes, channel width using MENU 1.11, 1.12, 1.10, 1.2 etc. - Press FUN on the microphone and use the arrows to select the channel you want to save. "Cover" will overwrite the memory, "Save" will create a new entry. - Press * on the microphone or V/M on the radio to select "memory" mode (displays channel number, name and frequency) - Press FUN on the microphone, select SET (or press 3) and then submenu 3.21 "Name edit" - Use the up and down arrows to select letters and # or * to change the position of the letter in the name - Press FUN to remember the name Deleting a channel: - Press FUN on the microphone, select SET (or press 3) and then submenu 3.20 "Delete Ch" - Use the up and down arrows to select the channel number to be deleted and press FUN to confirm
Can't get this to work. After setting up the channel in VFO mode pressing FUN again puts you back into the menu and there doesn's seem to be a way to add the channel to memory
Thank you Kevin, very good video and am all set up with the programmed channels ready to install when radio arrives tomorrow. The software was so fast and easy to download and set up in less than a minute. 73 GW3XJQ
The Commander setting is probably something to do with noise reduction? companding noun A process in which noise in a signal is reduced by selective compression and expansion
I can't seem to get this radio to accept the PMR frequencies. When I input the channel into the field say 446.00625...when I exit that field it reverts to 446.0600.. I've set the step to 12.5...Any Ideas anyone?
Having a look at this for a friend and found it won't accept a 5 digit decimal place frequency. Works absolutely fine with a 4 digit decimal frequency. Have I missed a function in the software that will enable this at all? Any help appreciated. Thanks
Do you have any ideas about the ADJUSTMENTS menu? It is some kind of an engineer menu with some useful settings, but all sellers reply as "this is not for customers, customers are stupid" and it makes me mad 😡 And I found ZERO reviews with this information...
@@KevinOReillyswlyepp! And I have no ideas about to find that password. Seller gave me an EXTREMELY polite answer with the sense of "No Stupid Users Allowed, Our Great Technicians Only". The easiest way to get password - capture the technician and... (all up to your fantasy). But I don't think that it is possible ((( What is inside? I suppose, some useful settings. Like full-band Rx/Tx and others... Maybe...
TOA (Transmit Overtime Alarm) function
With the TOA function enabled, when the TOT function is active and the radio reaches
arrives within the preset transmission time limit (TOT), you will hear a sound
of alarm. There are 10 levels of TOA, with 1
second of separation between one and the other. If you set level 1, you will hear the tone
alarm 1 second before the end of the transmission; setting level 2
you will hear a warning tone 2 seconds before the end of the transmission and so on
right away.
The noise reducer is in transmission, better to exclude it for stronger and clearer modulation
The click isn't between UHF and VHF - it's clicking between the A transceiver and B Transceiver. I hear the click even if both are set to frequencies on the UHF band.
Channel programming:
- Press * on the microphone or V/M on the radio to select "frequency" mode (only displays VFO frequency)
- program the frequency and offset, CTCSS codes, channel width using MENU 1.11, 1.12, 1.10, 1.2 etc.
- Press FUN on the microphone and use the arrows to select the channel you want to save. "Cover" will overwrite the memory, "Save" will create a new entry.
- Press * on the microphone or V/M on the radio to select "memory" mode (displays channel number, name and frequency)
- Press FUN on the microphone, select SET (or press 3) and then submenu 3.21 "Name edit"
- Use the up and down arrows to select letters and # or * to change the position of the letter in the name
- Press FUN to remember the name
Deleting a channel:
- Press FUN on the microphone, select SET (or press 3) and then submenu 3.20 "Delete Ch"
- Use the up and down arrows to select the channel number to be deleted and press FUN to confirm
Thanks for this information
Can't get this to work. After setting up the channel in VFO mode pressing FUN again puts you back into the menu and there doesn's seem to be a way to add the channel to memory
Thank you Kevin, very good video and am all set up with the programmed channels ready to install when radio arrives tomorrow. The software was so fast and easy to download and set up in less than a minute. 73 GW3XJQ
Glad it helped
Thanks for the video. Just received my radio yesterday.
Enjoy it
The Commander setting is probably something to do with noise reduction?
companding noun
A process in which noise in a signal is reduced by selective compression and expansion
bonjour ou avez trouver le progamme SF 8118 SVP MERCI
The link is in the description of this video!
I can't seem to get this radio to accept the PMR frequencies. When I input the channel into the field say 446.00625...when I exit that field it reverts to 446.0600.. I've set the step to 12.5...Any Ideas anyone?
Set step to 6.25
@@KevinOReillyswl Cheers buddy...I'll try that when I get home.
Hello, my frend, I have a problem. I don t know how to turn on priority channel scanning. Greetings Tomek.
Having a look at this for a friend and found it won't accept a 5 digit decimal place frequency. Works absolutely fine with a 4 digit decimal frequency. Have I missed a function in the software that will enable this at all? Any help appreciated. Thanks
Check the channel spacing setting.
Brilliant review just ordered one of the from AliExpress. Many thanks for sharing.
Glad it was helpful!
Thanks for sharing, especially the programming software link
You are welcome!
gracias por el video, tengo una duda que cable de programacion se ocupa te saluda CD2DCZ desde chile
Standard usb c cable
Thanks for this, I am awaiting delivery of mine from Aliexpress.
Will it work right out of the box without having to do updates or anything?
Yes
My display is rather dim.. Is there a way to get it brighter? I cant find any sadly.
As far as I know there is no way to control the brightness
How do you program a gmrs repeater?
buonasera,potete aiutarmi a trovare il software di prorammazione della radio.grazie
le lien pour le logiciel est dans la description de cette vidéo
What I don’t see on this software is how to add the 100hz tone information for my club repeater (K4MN).
What programming lead does this radio need?
A standard USB C cable
@@KevinOReillyswl really appreciate your reply
Он работает на 1296мгц? Меняется?
145 and 430 Mhz only
Do you have any ideas about the ADJUSTMENTS menu? It is some kind of an engineer menu with some useful settings, but all sellers reply as "this is not for customers, customers are stupid" and it makes me mad 😡 And I found ZERO reviews with this information...
I thought that section of the menu needed a password?
@@KevinOReillyswlyepp! And I have no ideas about to find that password. Seller gave me an EXTREMELY polite answer with the sense of "No Stupid Users Allowed, Our Great Technicians Only". The easiest way to get password - capture the technician and... (all up to your fantasy). But I don't think that it is possible ((( What is inside? I suppose, some useful settings. Like full-band Rx/Tx and others... Maybe...
FUN+7 enables FM radio, FUN+9 enables scanning, FUN+* jumps to home channel