I really wish SMD would make a line of round gauges that would easily fit into standard Autometer type pod. That would open the door to so many more potential customers because of the thousands of gauges pods that are one click away vs having to design and fabricate custom one off square gauge pods for your application.
Welcome back Doug. Congratulations to you and your wife on the new addition. Truck looks great your inspire me to get back in case audio under the shade tree
Just realized I’ve been watching this show for 2 years... lots of memorable shits... seriously though the content has just gotten better over the years keep er up douggy
I really needed to see this old video! I was cracking up so hard! What led me up to this was a search for the OM-1 because I already have a TM-1 and was thinking about spicing up my setup.
I wish I lived a lot closer to hear yours in person to compare it to mine ,and you seem to be a lot like me and will never be finished with what you love to do and try and make it better.
If you switch to the Sony preput it’s only gonna distort even more giga Watts the amp can produce under heavy bass knobs, Your motor mounts are gonna twist and the intake manifold cap is gonna melt
So you getting dirty signal constantly with the way you have it now? Otherwise just low volt to high volt pre outs won't change anything. Since the gain is for input voltage.
Nice install love your videos was wondering did u do 1 run of power ground remote then just jump it to the other meter i got these 2 meters and was debating on what way to route the wires thanks
I really wish SMD would make a line of round gauges that would easily fit into standard Autometer type pod. That would open the door to so many more potential customers because of the thousands of gauges pods that are one click away vs having to design and fabricate custom one off square gauge pods for your application.
That bass knob is LITERALLY gonna TWIST!!!
Welcome back Doug. Congratulations to you and your wife on the new addition. Truck looks great your inspire me to get back in case audio under the shade tree
Just realized I’ve been watching this show for 2 years... lots of memorable shits... seriously though the content has just gotten better over the years keep er up douggy
Hope you had a good week off with the new baby. Glad you're back and can't wait for what's next.
I really needed to see this old video! I was cracking up so hard! What led me up to this was a search for the OM-1 because I already have a TM-1 and was thinking about spicing up my setup.
The only car audio show on youtube that's always funny.
Awesome to have a fresh video today! That's looking awesome.
That's great!!! I finally get to take a 💩!!!! It's only been 10 days! Thanks Doug!
I wish I lived a lot closer to hear yours in person to compare it to mine ,and you seem to be a lot like me and will never be finished with what you love to do and try and make it better.
Glad to see you back. Hope your family is well. Thanks for a cool video.
Just when I thought I was over my PTSD....Soundman explosions to the rescue.
Sometimes it matters what you did Doug!
Glad you're back!! Hope all is well with the family.
Rip it!!
Congrats on the new baby Douglas! 👶🏻🍼
SirDoucheLordMcDickSneaze must never quit supporting this show through Patreon, cracks me up everytime.
Welcome back!
Man your f 150 is freaking crazy, wishbi could see it in person and hear it. Great job and congrats once again on your new arrival.
Cool, glad your back! Hope all is good on the home front.
that bass knob tho!! Keep up the great work!!
System is coming along great, looks good as well
You have a great show hope you and the family are doing great..
Love the videos,me and my 7 year boy along my 9 year old daughter watch, I learn tricks and we laugh are heads off at your shenanigans
Dang Doug, if you ever get into an accident the entire interior of your truck is just going to implode on you. Dash and trim bits everywhere!!
My Man Doug E Bernard Super Genius It’s good to have you back hope you and the Mrs. had a good week. Now back to business! Stay Eazy
The vids never get old keep it up
Congratulations on the new kid and I hope everyone is 100% healthy
glad to see you are back...hope your wife and new baby are doing great....?great video doug..
I swear those explosions get me every time 😂
Thank god your back Doug!!!!!!!
Good to have you back doug
Daaaaaamn!!! That Dove Shack brought back some memories, Doug!
Glad you're back. I hope you enjoyed the week off with your newest edition!
welcome back Doug! hope the wife and baby are doing well!
Good to see your back!
You need to make a playlist of all the songs you use in your videos, love to watch, lots of good info, keep it up!!
Good to see ya back bro. Hooe tge new addition isn't givin you guys too much grief 🤘
Welcome back...Always good music man..love the vids
Hope the wife and kid are doing good man! Great to see you back.
I couldnt wait to watch this week. Looks great like always doug!
Missed ya Doug.. Did not miss the explosions...
Looking forward to seeing how you're going to mould the gauges.
one of the best shows on youtube.. I dont even like cars or speakers..
Congrats, and i hope your wife and baby doing very well!
And another great job...
dam haven't heard the Dove Shack in Forever summertime in the LBC thanks for the kickback the oldie
Good seeing you back again on RUclips Doug hope your wife and the new baby is doing well .
PSE Mentalist rip it
the dude you rip it
fdfc78 twist it and rip it bro 😂😂😂😂
the dude bend it, mend it and RIP it
fdfc78 grip it and rip it?
Love the sound clip from Massacre! \m/
Welcome back Doug!
I like the new attitude after the time off, more of a f-off feeling. I like it.
Coming along nicely Doug.
We missed ya bro ....! Long time no smoke
Great Scott!
Fab kitchen wire job.
Dude I like your vids. I look forward to seeing them every week
Welcome Back!! Hope Mama and baby are doing well!
17:30 dove shack , great video my dudez
Fantastic video love it.
I fear I'm going to die from diverticulitis from this irregular video schedule!
Welcome back Carter.... I mean Doug :P
hell ya doug is BACK!
Great video dude!
Great, here comes another 23 episodes of watching wiring get cleaned up.
Pretty funny for a while there you go girl. I want to have that disco music for my ringtone
4:42 best part
Back on, hope the new addition to the family is doing great. Now let's get back to our normal schedule
Dammit doug I was already getting soundman withdrawls!!
I was thinking the same thing!
Welcome to Bernards institute of fabrication and sound. He can do engine swap for cheap.Just bring your grandma with you.LOL
Great Scott
It’s back. Yeaah!
Hope you had a good week off and hope the baby and wife are doing good man!
Mmm yeah, I love it when you revise your knob on camera...
Doug! You need more rage clips of Rafa.
Doug is back!
Satisfying video today doug!
I love the "jalaluja" skits.... fucken golden ! #godbless
I just dropped a 6lb3oz deuce. Named it Doug. That week off hurt.
Perfect man!
Neon glow fish in that aquarium of a sub enclosure would be the shit my guy! BTW, I got up early to watch today!!!
Nice Nice, good job ✌🏻😎😎😎😎😎
If you switch to the Sony preput it’s only gonna distort even more giga Watts the amp can produce under heavy bass knobs, Your motor mounts are gonna twist and the intake manifold cap is gonna melt
So you getting dirty signal constantly with the way you have it now? Otherwise just low volt to high volt pre outs won't change anything. Since the gain is for input voltage.
Hell yeah. Never clicked so fast any notifications
Good shit man! Love the content
15:19 Dude.. The Veldt ❤
Doug your more hilarious when I'm stoned 🔥🔥
Haha that slap the daily back together n drop off the kids is so true ha..
Yo about time. Been a long week with out videos I took the day off just to watch todah
More fun pulling car apart over n over can't think of everything at once lol
Welcome back Doug
Hell yea dougie is back!!!!
You should hit up CT Sounds for their new 3 Way set and do some A Pillars in there, or Sails.
Great to have you back Douglas!! Why don't you have light bar for when your doing interior work on your truck? It's dark in there lol
I saw that Warren G 'Take a Look Over Your Shoulder' album in your collection... my man! :D
Lmao the Justin Timberlake effect is why you just had another baby. Lol
Your back I missed you so much..
Nice install love your videos was wondering did u do 1 run of power ground remote then just jump it to the other meter i got these 2 meters and was debating on what way to route the wires thanks
Welcome back brother!!!
Can you explain in more detail about getting more out of your amp without clipping ? Thanks
i’m curious about this too.
Wanna hear about this too
Good job man
Yay he's back
Spike tv needs to give this guy a tv show he's fucking hilarious.