Lowered RAM 1500 Suspension Geometry Bracket Kit Install | INEZ
HTML-код
- Опубликовано: 6 сен 2024
- Lowered RAM 1500 Suspension Geometry Bracket Kit Install | INEZ these brackets correct the rear axle angle and fix most of the issues when lowering these 4th gen ram pickup trucks and fixing the ram1500 rear suspension when lowered to increase stability and get the wheel well aligned and back centered
Checkout Moes Performance for the brackets
www.moes-perfo...
Here is the same black paint I use
amzn.to/3wmwmeE
Here is the same primer I used
amzn.to/3Lp26Ev
*Checkout other cool products Boosted Motorsports has tested and recommends HERE* 👇
www.amazon.com...
Support BoostedMotorsports by JOINING Today! / @boostedmotorsports
Disclaimer:
Due to factors beyond the control of BoostedMotorsports, I cannot guarantee against improper use or unauthorized modifications of this information. BoostedMotorsports assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. BoostedMotorsports recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of BoostedMotorsports, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not BoostedMotorsports.
As an Amazon Associate I earn from qualifying purchases. Products in the provided Amazon links are my recommendations based on honest use and experience with them.
#Ramtrucks #ram1500 #mopar
Checkout Moes Performance for the brackets
www.moes-performance.com/mobile/Product.aspx?ProductCode=IHC-CUT-KIT
The alignment of the rear wheel in the wheel well is spot on
That RAM is going to be sick! I love my crew cab 4x4 Warlock but once the kids are gone, I just might have to grab one. I want to see that 5.7 get the sauce with just bolt on mods and tune. 🤘🏼🔧
A warlock has the off-road package right? Might be the rebel. Would be a waste to lower that
Looking awesome John as usual!!!! Definitely looking forward to seeing you install the knew bump stops it wouldn’t be complete if we didn’t see it completely done!!!! See you in the next video!!!! My mouth is watering thinking about what you’ll have in store for us in the next one!!!!
I just want to ask what you think the possibility is that you can fit that extra viper engine into the 2nd gen you just recently bought? Imagine 2 viper powered trucks from 2 different eras.
Lol that's exactly what I said
The 2nd gen 2500 and 3500's could come with a V10 Magnum engine which is the same Block as the older viper v10's just different heads and internals. So the possibility is pretty high.
@@Texas12valve I really hope he's reading these comments lol. I would like to see him keep the interior stock but see if Holly has a instrument cluster display like the one in an old video of his where he shows off another hellcat Dakota. I hope they have them for 2nd gen rams. LMC has entire dashboards for 2nd gens too.
@@GabrielSorrow they have the top dash and the bezels. If you're in my boat where the dash frame assy. Is messed up the o ky option is trying to find a clean one in a junk yard
I removed the bump stop insulator and just trimmed it from the backside. It kept the factory look but gave me the needed clearance.
Looks alot better. And definitely will ride smoother
You should look into the Core 4x4 rear control arms and adjustable Panhard bar too. the factory bushings will not take the abuse. My buddy went through 2 factory sets inside a year after we installed a 2.9L Whipple on his 2013 Ram LOL. He needed the adjustable panhard bar because after dropping his truck the stock bar shifted his axle over to one side. Can't wait to see the future upgrades!
Very good install video john. I was going to suggest drag bags for the coils but, you already decided that way lol. They really help on the launch too! Hopefully sometime soon I'll be grabbing a 4th gen 🤘
This will be one cool ride when you get it back on 4 wheels! Great video content, thanks man!
What did you end up doing about bump stops? Did you ever replace them?
you should definitely upgrade the control arms. night and day difference
I 'm interested in BellTech 2" front 4" back drop kit for a 2010 quad cab. Now I know I'll need these brackets from Moes and completely remove the rear end. Only question and additional cost remaining (I hope) is the bump stops. In this video you mentioned maybe something from Energy Suspension. What exactly worked for you? Thanks, Ben
Great job man!! Your videos are very helpful. Thank you 👍🏻
Did you still keep the belltech track bar relocator ?
Do 305 tires fit with the lowering kit? Just looking at ur setup looks like they'd rub
This is a great video!! Really enjoyed it!!
O yea good work
Did you ever do the ride Quality follow up? I’ve got the BT 2/4 kit on my ‘16 4wd and the rear ride has my wife&kids fussing when I hit bumps
Bro, you got nothing.
I’ll red light race ya and the only thing I’ll see is your hazard lights when you blast that rear end clean off. Just kidding of course. I
Enjoy your content and uploads 👍🏼
Why your channel gets spammed though 🤔
Do you need to realign vehicle after adding this bracket if you have already aligned after 2/4 drop install? ?
WELL done..
cheers
thumbs up!
Hi my question is what paint did you use first ?
Awsome job, clean and mean 👌
I'm going 355 gears in my 2nd generation from 392s, but my question is why? I just couldn't find tha gears I needed in pnp, but what's your reasoning?
All sounds cool
looking good nice work ...
Are those top 3 coils on the spring supposed to be THAT compressed?
would this fix the trucks wobble at high speeds?
Okay so 4/6 drop on a 3rd gen next? 😂 it looks good bud
What's the name of the blue you always paint your trucks it looks so good
on the Dakota R/T if it is the factory blue it would be Intense Blue. the Ram looks like it is probably Blue Streak Pearl (mopar paint code PCL). my 2015 Ram R/T is the same color. it really changes in different light. it goes from a sapphire like blue in the sun to almost purple in the shade.
@@jontoad Thx
Why does no one c-notch these,
like they do with the leaf spring flip kits?
You can, but it’s really not necessary. They have plenty of clearance up to a 7” rear drop. You will bottom out on the rear control arms before the dif hits the frame. That’s why I’m putting these brackets on my truck I have a 5” rear drop. And my rear uppper control arm hits frame. This won’t let it happen anymore.
@@doublegrant6144 that makes sense. Thanks for the reply!
What the rear height?
It’s just a belltech 2/4 drop kit