VOG, this is the video I was waiting all these months! Good close-ups of the AmeraLabs Town Test: Antialias OFF and ON. You finally did it and it shows what to expect ❤️ The voxels are really sharp (which is good) but they are really big (which is bad) BUT that’s what good reviews do: showing it, so people can decide what matters most to them. Congratulations for the great photos! AND we are all happy that you are still here, in the world of the living 🤗
Glad to hear you're doing better vog ! Your channel has been so helpful on my journey. Was wondering if the settings for the craftsman was the same as siraya cast, thanks !
The place I am interested in AA is in flat surfaces, if you are printing something at a 45° angle unless you want to set your z layer height to your xy resolution, you will end up with uneven stair stepping, which can be very noticeable, I wonder how well AA addresses that particular issue. I have the original anucubic mono and except in photon workshop doesn't support AA (though you can check the boxes on lychee or chitubox). In any case welcome back, glad you didn't let your rotten bits win out over your good bits and you are back and healthy. Thank you for your amazing videos as always.
Glad you are well again, please take good care of yourself. Best wishes from across the pond. And thanks for the nice look at DLP print quality. The macro shots are excellent!
Nice! I think that the Craftsman bottle in your video is the regular one. The DLP one is labeled 'DLP Craftsman'. Also the UV wavelength is 365-405nm (355-410 for the regular one). Don't know if it makes a difference but just noticing.... 😅
Hi! Medical doctor here. How did you get the sepsis (port of entry, original infection)? Anyway, glad you survived that great ordeal! Surviving a sepsis is not an easy feat.
Wow, I just stumbled upon this channel. Very excited to explore your stuff. Have been sitting on this Ultra for months now and have been pretty intimidated by the whole affair and figuring out exactly what I need to do to start. Do you have a beginner setup video in your library? Something that takes from plugging in the machine for the first time to getting your first print? I really like your style of presentation and appreciate your willingness to share.
VOG to the rescue again! I've had nothing but print failures with the Craftsman resin on the D2 using fully supported STL models exported from Chitubox, all models that ran just fine on my Phrozen 8K. I'm seeing all sorts of delamination and broken supports with the Craftsman resin. Even their factory test print had many broken supports but it still managed to print pretty well. I will say that the stuff that does manage to print looks amazing. I'll give your settings a shot and see what happens. Thanks! - DTJ
@@vogman Hey Vog, with the black Craftsman resin I received from AnyCubic it seems to want a lot more exposure than the gray you tested. On my D2 30um slices are happy at 2.8 seconds and for 50um I'm at 3.2 seconds. I also swapped my plastic vat for an aluminum one that I could skin with some high quality nFEP and it was like night and day. No more failures and better looking prints. If I might ask where did you land on your anti alias, gray, and blur settings for the D2? I've been running through that optimization exercise all weekend. Thanks again!
Thanks a lot, very helpful videos on your channel..Got my Photon Ultra delivered last week. For me it seems I need a bit more Bottom Exposure (like 25 oder 30) for prints to form. Normal Exposure of 2 seems almost perfect ( on Phrozen test print).. Without your videos that would`ve been painful days of bad and failed prints. All thumbs up. And of course glad to hear you are feeling well again.. sepsis is no joke.. Friend nearly lost a leg due to an cat bite, which he left untreated for some days.
Sorry to here about that mate! Sepsis is not nice, but glad to see your doing better 👍 I had it almost two years ago now when an abscess burst from a bad tooth hospitalised for a week and and a sh*t load of antibiotics to boot!
I have also heard sepsis isn't fun, so no need to try that again I think! Perfectly timed video...I have a test running with a lower lift speed as I type this.
OMG matey hope your feeling better now. that is not a good thing. glad your back home. i still not got one yet. hence no videos. lol. great video matey. i have found there pre sliced files tend not to be the same as the default settings for the printer. this used to be the case with the demo model that came with the photon. not sure if the demo models for the ultra are pre sliced. ?
I was just wondering about this printer. I was looking to see if they were on sale yet or if the Kickstarter production phase hadn't finished yet. Wasn't able to find it listed on AnyCubic's website. Did a bit more poking around and found that it was sold out on their website. I hope they make some more of these things, I'd love to get my hands on one.
Quick question for you. Using the Anycubic resin, how is the odor while printing? Is this something I can do in my office or do I need to build some sort of ventilation hood for it?
I just used the default settings. I found I had a failed print when I sliced with Lychee as opposed to Photon Workshop, which I’m seeing other people say was their issue too. So weird! Guess I’ll do supports in Lychee and final slices in PW
I also found that Lychee didn't work directly and had to work around and use Photon Workshop as the final slicer. Using Siraya Tech Fast grey resin I have been getting great results.
Hmmm the "DLP Craftsman Resin" is the resin that comes with the printer. "Craftsman Resin" is different. I found this out the hard way as after I finished my DLP resin bottle that came with the printer I had great success. I went to purchase more and mistakenly bought the the none DLP version and started getting constant print failures and much more noticeable layer lines. After tweaking the settings I started to get more reliable prints but the DLP resin still printed better
Hello. I have a problem with Anycubic Photon Ultra. I've only had the printer for a few days and I'm learning. So far, everything has gone smoothly, but recently when I print, each time the print detaches from the support and sticks to the fep filter. I use Anycubic Craftsman DLP resin. I tried to print already supported files from Artisan Guild and also add support myself.
Quick question, though it seems likely that the answer would be “No” or “Not very much”: Does antialiasing increase print times? And I very much agree with Meeko as far as being glad that you are doing better. I may have said so yesterday, but I commented on many videos on other YT channels.
You know what, I've no idea. I can't imagine is would slow anything down as it's just a slicer function, but that's just a guess. And thanks for taking an interest - it's much appreciated 😁
Glad you’re feeling better! I got mine last week and could only get it to work if I used their dlp craftsmen. So hopefully this is helpful! Did you notice you can’t adjust the UV power?
It's happy with Craftsman, but I've had success with other resins. You just need to take your time and dial them in ruclips.net/video/jOjB3Fr-0no/видео.html
Glad your feeling better. What version of Lychee slicer are you using? For some of us 3.6.601 is not working with the photon ultra at all. It will slice the file but the ultra will not read it at all.
Got my Kickstarter delivery yesterday but without the ordered resin. From comments on Kickstarter it will arive later. As I read the comments earlier I ordered some resin from Amazon. Ohter than "suitable für DLP" I did not look much in the description and so I ended up with water washable resin from Nova 3d. Although the first print looks ok did you have any experience with water washable resin with the photon ultra? Besides the only testfile I got from anycubic so far is some sort of lampion. No Wolferine for me.
As always, another informative video. 👍 . Now , I want to know more about up coming printers this year. I remember a video a you made few months back about another dlp FROM elegoo coming??? Any updates on that or others. I just got my mini 8k and now I'm hooked on resin printing. I already "need" a larger format resin printer. Would be cool if manufacturers started making large dlps for consumers.
A large printer that I recommend is the photon mono x. I've had it for 8 months or so and love it! It takes some tuning to get it to work right but it's amazing! Its build plate is massive aswell so you can print a ton of large parts. I dont exactly remember the dimensions of it though.
yes, Elegoo did say last year that they were going to bring out the DLP version of Mars 3, and of course the Mars 3 build plate is not that much bigger than the Mini 8K (wider but not as long). Look after your Mini 8K for the meantime, there will be new DLP with larger plates in future but I think theres some issues that need a little ironing out.
I got this printer on kickstarter, and I agree with the statement of this being a high quality printer, no complaints about the incredible print quality of this machine. However, after a few months playing with it I've come to the conclusion that the build plate is a total deal breaker for me, it's bloody tiny! My elegoo mars original that I sold to buy this had a bigger print area. I don't print large objects often, but I literally don't have any choice with this printer. The pixelisation is also a big point of contention for me, I've lost more detail to pixels than to resolution, I've decided to go back to elegoo and bought a Mars 3, from testing on my photon I've found that resin quality has a far greater effect on print quality than anything else, so I'll see how the 4k resolution goes.
I hope I will try it one day... I bought an Ultra with 1Kg of resin last week. Today, the printer arrived, but without the resin. And when I plugged the printer to calibrate it, it didn't even light up ! What a crap !
Hi Tom. Would you mind sharing your user experience here vegoilguy.co.uk/3drp I'm collating data on all makes and model of 3D printer to share with the printing community. Good input should give us all useful data 😁
@@vogman OK, I did. There's some news. I received a new driverboard as it was faulty but, it broke down as soon as I started the printer. Same breakdown. Never buy Anycubic !!!
Oh boy thats a scary thought to have sepsis. Glad your back to health. Btw i got a mono 4k now:) The ultra has the exact same chassis as the mono i noticed haha
Hello VogMan, I have an Photon Ultra too, please could you share me your setting to print with the Siraya Tech Purple ? That will help me a lot! Thank you
Me again, another Problem with my Photon Ultra. I printed the test pieces to "dial in" to my resin. Unfortunately theses are very low hight and lay complete flat on the bed and in the end I had a very hard time getting it of the bed at all. In fact during the process of removing it from the printbed the testprint was completly destroyed and my build plate now has a lot of ugly scratches, sigh. Any Ideo on which parameter one can play around to get the print from sticking not to the bed like concrete?
Hi hope you can help I have visible layer line on prints I'm using craftsman resin and your basic settings I change exposure time to Mach my condition I do not know what to do
Do you have ultra settings with resin x-One bluecast? I have problems with this resin, i haven’t been able to print anything. I need a good resin for casting. Help! 😩
Not sure if anyone can help, I've recently received my Photon Ultra as my first 3d printer and I'm having issues with the quality. Namely, the final ~25% of the build comes out highly glossy and lacking in detail as if the resin hasn't cured properly for the later layers, the beginning layers towards the raft are crisp and seem typical of what I should be seeing over the entire build. I'm using the resin supplied with the kickstarter, ensuring it has been well shaken, and have tried both the default settings and those suggested in this video but I still get the same issue. Possibly important to say but it appears irrelevant of size, for example I printed both a mounted figure and one on foot on the same print, and the mounted figure showed greater clarity further along the build even after the one on foot had since lost any fine detail. Could it be an exposure issue? In Australia so it is very hot and humid at the moment.
I got my ultra in the post with the dlp resin. Default settings using the software on the USB stick and all my prints have been perfect. So I don't know why so many people are having problems
Sure you can. Just export from any 3d editor to obj or stl and you're clear to go. But keep in mind the fact that 3d printers work only with actual geometry data - no shading, no smoothing, no displacement maps etc Only pure geometry.
you will need to export the model as a .stl file. Also make sure any modifiers you added are applied to the model. That includes any subdivision etc. Check the scale of the model also. You can adjust the scale percentage when exporting.
Ive never used any 3d printer ever. I have a Photon Ultra now and don't even know where to begin. The instructions stop after you try the TEST bottom. It doesn't tell you what to expect, how to clean, or how to proceed really at all. I don't even know the terminology, so a few of the videos I've seen are confusing. Please help!
Honestly, it's very rare any slicer reports an accurate print time. It's just an ESTIMATE. Slicers generally update periodically and make adjustments, which hopefully makes them more accurate. But for the most part, just think of it as a GUIDELINE and not a fact.
well single Z, as bad as usual, just print screen at 7:18 - paste in Paint and zoom on the left leg, thats lot of layers there, Anycubic just never listen to customer feedback
![Anycubic Photon D2 DLP 3d resin printer [HONEST REVIEW]](http://i.ytimg.com/vi/Q-OoGQfG2wY/mqdefault.jpg)
![Anycubic Photon D2 DLP 3d resin printer [HONEST REVIEW]](/img/tr.png)
VOG, this is the video I was waiting all these months! Good close-ups of the AmeraLabs Town Test: Antialias OFF and ON. You finally did it and it shows what to expect ❤️ The voxels are really sharp (which is good) but they are really big (which is bad) BUT that’s what good reviews do: showing it, so people can decide what matters most to them. Congratulations for the great photos! AND we are all happy that you are still here, in the world of the living 🤗
Glad to hear you're doing better vog ! Your channel has been so helpful on my journey. Was wondering if the settings for the craftsman was the same as siraya cast, thanks !
From memory, it was 4.5 seconds normal layer and 40 bottom layer. It's fine on the lift speed, etc 😁
Bought this printer because of your amazing videos! Hope to have it running over the next days. THANK YOU!
Hope you enjoy it! It's an excellent printer.
Thanks!!! Perfect timing, I just got mine in the mail yesterday! Sorry to hear about the hospital visit, glad you're on the mend!
Many thanks 😁
Where did you get it?
@@BrickBazooka there was a Kickstarter campaign half a year ago
Sorry to hear about your hospitalization but I'm glad you're better now. Welcome back!
Many thanks 😁
We’ve all missed your content, but it’s very understandable given the circumstances. I’m really glad to hear you’re feeling better! Take care!!
Many thanks 😁
The place I am interested in AA is in flat surfaces, if you are printing something at a 45° angle unless you want to set your z layer height to your xy resolution, you will end up with uneven stair stepping, which can be very noticeable, I wonder how well AA addresses that particular issue. I have the original anucubic mono and except in photon workshop doesn't support AA (though you can check the boxes on lychee or chitubox).
In any case welcome back, glad you didn't let your rotten bits win out over your good bits and you are back and healthy. Thank you for your amazing videos as always.
Any chance you could do a video on IPA alternatives for cleaning the prints? Thanks
Oh no! Glad you’re ok! This couldn’t come at a better time. I just received mine. Just waiting on the resin which should be here any day now.
Many thanks. And you'll love it. 😁
Sadly I missed out on the kickstarter due to "technical issues", but glad to see for those who did! Happy you survived, you certainly have been missed
Many thanks 😁
Glad to hear you're back and feeling better!
Thanks Robson. 😁
Glad you are well again, please take good care of yourself. Best wishes from across the pond. And thanks for the nice look at DLP print quality. The macro shots are excellent!
Thank you kindly
Cool. Happy to hear you're back to a healthy state
Many thanks 😁
Thanks for taking the time to do this! Much appreciated.
Glad you’re ok. Would really miss your videos
I appreciate that!
I'm sorry to hear that. So glad you're better. Thank you for the videos these are amazing.
Thanks Danny 😁
Nice! I think that the Craftsman bottle in your video is the regular one. The DLP one is labeled 'DLP Craftsman'. Also the UV wavelength is 365-405nm (355-410 for the regular one). Don't know if it makes a difference but just noticing.... 😅
I can only go off what Anycubic tell me. "This is the one you need" they say... 😁
Welcome back. You were missed. Hope all is well now.
Thanks Perry. I'm getting better every day 😁
Hi! Medical doctor here. How did you get the sepsis (port of entry, original infection)? Anyway, glad you survived that great ordeal! Surviving a sepsis is not an easy feat.
Bladder and kidney, then arragghh. Not much fun at all 😁😁😁
@@vogman wow that is bad to hear! Glad you are better now!
Sorry to hear you were ill. Hopefully you're doing alright. Thanks for sharing 👍
Thanks Craig. I'm getting better every day 😁
spared me a lot of time to do same checks, thank you
Wow, I just stumbled upon this channel. Very excited to explore your stuff. Have been sitting on this Ultra for months now and have been pretty intimidated by the whole affair and figuring out exactly what I need to do to start. Do you have a beginner setup video in your library? Something that takes from plugging in the machine for the first time to getting your first print? I really like your style of presentation and appreciate your willingness to share.
Take care man, we need your channel to lead us on the print road.
Thanks JoJo 😁
Great news hearing your on the mend all the best Geoff 👍
Thanks Ian 😁
VOG to the rescue again!
I've had nothing but print failures with the Craftsman resin on the D2 using fully supported STL models exported from Chitubox, all models that ran just fine on my Phrozen 8K. I'm seeing all sorts of delamination and broken supports with the Craftsman resin. Even their factory test print had many broken supports but it still managed to print pretty well. I will say that the stuff that does manage to print looks amazing.
I'll give your settings a shot and see what happens. Thanks! - DTJ
Hope it worked out for you 😁
@@vogman Hey Vog, with the black Craftsman resin I received from AnyCubic it seems to want a lot more exposure than the gray you tested. On my D2 30um slices are happy at 2.8 seconds and for 50um I'm at 3.2 seconds. I also swapped my plastic vat for an aluminum one that I could skin with some high quality nFEP and it was like night and day. No more failures and better looking prints.
If I might ask where did you land on your anti alias, gray, and blur settings for the D2? I've been running through that optimization exercise all weekend.
Thanks again!
Thanks a lot, very helpful videos on your channel..Got my Photon Ultra delivered last week. For me it seems I need a bit more Bottom Exposure (like 25 oder 30) for prints to form. Normal Exposure of 2 seems almost perfect ( on Phrozen test print).. Without your videos that would`ve been painful days of bad and failed prints. All thumbs up. And of course glad to hear you are feeling well again.. sepsis is no joke.. Friend nearly lost a leg due to an cat bite, which he left untreated for some days.
Really glad that you are well.
Many thanks 😁
Great Video as always!! I’m glad you’re back!!
Thank you!!
Sorry to here about that mate! Sepsis is not nice, but glad to see your doing better 👍 I had it almost two years ago now when an abscess burst from a bad tooth hospitalised for a week and and a sh*t load of antibiotics to boot!
Yes, I'm rattling with pills. Of course my immune system has now taken a battering, so I've caught a cold as well 😁😁😁
I have also heard sepsis isn't fun, so no need to try that again I think! Perfectly timed video...I have a test running with a lower lift speed as I type this.
Nice and slow with Craftsman... it prints well but it's a bit awkward. Phrozen 4K works much better if I'm honest 😁
Hope all is well, sepsis isnt to play with. Thanks for the ultra videos, still waiting for mine (Sweden)
I'm getting better every day, thanks 😁😁😁
Take care brother. Your videos are a delight.
Glad ur feeling better VOG.
Many thanks 😁
Thank you VOG, received mine on Tuesday but not setting it up till tomorrow! Should be a big leap up from my og photon.
Have fun!
Oh no! I hope you are feeling better now. Don't stress yourself and take care (:
Thanks Johanna 😁
OMG matey hope your feeling better now. that is not a good thing. glad your back home. i still not got one yet. hence no videos. lol. great video matey. i have found there pre sliced files tend not to be the same as the default settings for the printer. this used to be the case with the demo model that came with the photon. not sure if the demo models for the ultra are pre sliced. ?
your videos are great I am, glad your okay and getting better
Hi sir. Which one is better Anycubic ultra DLP or ELEGOO MARS 4
I was just wondering about this printer. I was looking to see if they were on sale yet or if the Kickstarter production phase hadn't finished yet. Wasn't able to find it listed on AnyCubic's website.
Did a bit more poking around and found that it was sold out on their website. I hope they make some more of these things, I'd love to get my hands on one.
Another great video! Would love to get my hands on a Photon Ultra and see what its like first hand.
There's so many options these days buddy 😁
Quick question for you. Using the Anycubic resin, how is the odor while printing? Is this something I can do in my office or do I need to build some sort of ventilation hood for it?
I just used the default settings. I found I had a failed print when I sliced with Lychee as opposed to Photon Workshop, which I’m seeing other people say was their issue too. So weird! Guess I’ll do supports in Lychee and final slices in PW
I also found that Lychee didn't work directly and had to work around and use Photon Workshop as the final slicer. Using Siraya Tech Fast grey resin I have been getting great results.
I noticed an update in Lychee this morning regarding the Ultra. Hopefully those clever boys are on the case 😁
Hmmm the "DLP Craftsman Resin" is the resin that comes with the printer. "Craftsman Resin" is different. I found this out the hard way as after I finished my DLP resin bottle that came with the printer I had great success.
I went to purchase more and mistakenly bought the the none DLP version and started getting constant print failures and much more noticeable layer lines. After tweaking the settings I started to get more reliable prints but the DLP resin still printed better
Hello. I have a problem with Anycubic Photon Ultra. I've only had the printer for a few days and I'm learning. So far, everything has gone smoothly, but recently when I print, each time the print detaches from the support and sticks to the fep filter. I use Anycubic Craftsman DLP resin. I tried to print already supported files from Artisan Guild and also add support myself.
Quick question, though it seems likely that the answer would be “No” or “Not very much”: Does antialiasing increase print times? And I very much agree with Meeko as far as being glad that you are doing better. I may have said so yesterday, but I commented on many videos on other YT channels.
You know what, I've no idea. I can't imagine is would slow anything down as it's just a slicer function, but that's just a guess. And thanks for taking an interest - it's much appreciated 😁
Glad you’re feeling better!
I got mine last week and could only get it to work if I used their dlp craftsmen. So hopefully this is helpful!
Did you notice you can’t adjust the UV power?
It's happy with Craftsman, but I've had success with other resins. You just need to take your time and dial them in ruclips.net/video/jOjB3Fr-0no/видео.html
Thanks for the AA close-ups :)
Any time!
Glad your feeling better. What version of Lychee slicer are you using? For some of us 3.6.601 is not working with the photon ultra at all. It will slice the file but the ultra will not read it at all.
I've got the same version, but I noticed a quick update in Lychee this morning regarding the Ultra, so no doubt those clever guys are on the case 😁
what you suggest for fine jewellery print
Hey bud I’m using lychee what settings would you suggest
The video showed craftsman, the DLP specific version has DLP on the front, just checking if you were using that or the standard craftsman?
Got my Kickstarter delivery yesterday but without the ordered resin. From comments on Kickstarter it will arive later. As I read the comments earlier I ordered some resin from Amazon. Ohter than "suitable für DLP" I did not look much in the description and so I ended up with water washable resin from Nova 3d. Although the first print looks ok did you have any experience with water washable resin with the photon ultra?
Besides the only testfile I got from anycubic so far is some sort of lampion. No Wolferine for me.
As always, another informative video. 👍 . Now , I want to know more about up coming printers this year. I remember a video a you made few months back about another dlp FROM elegoo coming??? Any updates on that or others. I just got my mini 8k and now I'm hooked on resin printing. I already "need" a larger format resin printer. Would be cool if manufacturers started making large dlps for consumers.
Nothing from Elegoo yet. Glad to hear you're enjoying printing 😁😁😁
A large printer that I recommend is the photon mono x. I've had it for 8 months or so and love it! It takes some tuning to get it to work right but it's amazing! Its build plate is massive aswell so you can print a ton of large parts. I dont exactly remember the dimensions of it though.
yes, Elegoo did say last year that they were going to bring out the DLP version of Mars 3, and of course the Mars 3 build plate is not that much bigger than the Mini 8K (wider but not as long). Look after your Mini 8K for the meantime, there will be new DLP with larger plates in future but I think theres some issues that need a little ironing out.
can u share ur support settings for lychee for big models? thanks
Oh no, Geoff! Glad to hear you're doing better. Glad to hear from you again.
Thanks buddy 😁
I got this printer on kickstarter, and I agree with the statement of this being a high quality printer, no complaints about the incredible print quality of this machine. However, after a few months playing with it I've come to the conclusion that the build plate is a total deal breaker for me, it's bloody tiny! My elegoo mars original that I sold to buy this had a bigger print area. I don't print large objects often, but I literally don't have any choice with this printer. The pixelisation is also a big point of contention for me, I've lost more detail to pixels than to resolution, I've decided to go back to elegoo and bought a Mars 3, from testing on my photon I've found that resin quality has a far greater effect on print quality than anything else, so I'll see how the 4k resolution goes.
Wich castable resin do you recommenend for the anycubic ultra
May I know if you have compare this to the 6k printer? How the quality?
I hope I will try it one day...
I bought an Ultra with 1Kg of resin last week.
Today, the printer arrived, but without the resin.
And when I plugged the printer to calibrate it, it didn't even light up !
What a crap !
Hi Tom. Would you mind sharing your user experience here vegoilguy.co.uk/3drp
I'm collating data on all makes and model of 3D printer to share with the printing community. Good input should give us all useful data 😁
@@vogman OK, I did.
There's some news.
I received a new driverboard as it was faulty but, it broke down as soon as I started the printer.
Same breakdown.
Never buy Anycubic !!!
Oh boy thats a scary thought to have sepsis.
Glad your back to health.
Btw i got a mono 4k now:)
The ultra has the exact same chassis as the mono i noticed haha
I really like the 4K. Great prints and a great price. You'll love it 😁
Hello VogMan, I have an Photon Ultra too, please could you share me your setting to print with the Siraya Tech Purple ? That will help me a lot! Thank you
Me again, another Problem with my Photon Ultra. I printed the test pieces to "dial in" to my resin. Unfortunately theses are very low hight and lay complete flat on the bed and in the end I had a very hard time getting it of the bed at all. In fact during the process of removing it from the printbed the testprint was completly destroyed and my build plate now has a lot of ugly scratches, sigh. Any Ideo on which parameter one can play around to get the print from sticking not to the bed like concrete?
Hi hope you can help I have visible layer line on prints I'm using craftsman resin and your basic settings I change exposure time to Mach my condition I do not know what to do
Coffee and VOG. I’ll call this a date on my book.
Thanks Juan. Hope you're doing well buddy 😁
@@vogman yes indeed I can’t complain, I was wondering where have you been. I hope you are doing better.
Bloody hell. Glad you pulled through bud!
Many thanks 😁
Can't wait till I can buy this printer. Coudn't be part of the kickstarter at the time!
It will be available soon hopefully 😁
Lol thought you'd give sepsis a try...
yessssss geçmiş olsun :)
sendeki makina ve kullanıların kullandıgı makına farklı dostum
Do you have ultra settings with resin x-One bluecast? I have problems with this resin, i haven’t been able to print anything. I need a good resin for casting. Help! 😩
Check the Bluecast website. They are pretty good at providing settings these days 😁
Not sure if anyone can help, I've recently received my Photon Ultra as my first 3d printer and I'm having issues with the quality.
Namely, the final ~25% of the build comes out highly glossy and lacking in detail as if the resin hasn't cured properly for the later layers, the beginning layers towards the raft are crisp and seem typical of what I should be seeing over the entire build.
I'm using the resin supplied with the kickstarter, ensuring it has been well shaken, and have tried both the default settings and those suggested in this video but I still get the same issue.
Possibly important to say but it appears irrelevant of size, for example I printed both a mounted figure and one on foot on the same print, and the mounted figure showed greater clarity further along the build even after the one on foot had since lost any fine detail.
Could it be an exposure issue? In Australia so it is very hot and humid at the moment.
Sir my Anycubic ultra dlp is taking 4 hrs to print a normal ring ! Ive tried all settings need help!
I want to know where to get that Logan bust, i got a lame anime girl as my test model.
Glad to see you're ok though :-)
Thanks Colin 😁
I got my ultra in the post with the dlp resin. Default settings using the software on the USB stick and all my prints have been perfect. So I don't know why so many people are having problems
I couldn’t get it to work with any resin. So I bought their dlp craftsmen and it works flawless.
Nice 😁
sir can i use any castable resing in this printer ?
In theory, yes. It's just a matter of dialling in the settings.
do you will do this kind of video por D2? we need it :V
Thx.
I just wish i could buy one of these
They will become Retail eventually, but if Anycubic aren't careful, Elegoo might beat them to it 😁
Just a dumb question. If I design something in blender can I after the render put it in lychee slicer?
Sure you can.
Just export from any 3d editor to obj or stl and you're clear to go.
But keep in mind the fact that 3d printers work only with actual geometry data - no shading, no smoothing, no displacement maps etc
Only pure geometry.
you will need to export the model as a .stl file. Also make sure any modifiers you added are applied to the model. That includes any subdivision etc. Check the scale of the model also. You can adjust the scale percentage when exporting.
Other kind viewers have beat me to it, but yes. You simply need to save your design as an STL file in Blender. Then you can open it in a slicer 😁
@@P1x3lMagic Thanks a lot for this answer
@@vogman Lovely!
Ive never used any 3d printer ever. I have a Photon Ultra now and don't even know where to begin. The instructions stop after you try the TEST bottom. It doesn't tell you what to expect, how to clean, or how to proceed really at all. I don't even know the terminology, so a few of the videos I've seen are confusing. Please help!
Have you tried printing on the Ultra at 10µm?
Already missed you.
Thanks buddy 😁
Great video
Glad you enjoyed it
Where to download slicer or share me download link . it help me lot
If you have an Anycubic printer, there's usually a copy of the Slicer on the USB stick 😁
i requisitioned a Anycubic printer and i struggled to make sons. I now use Eleego like my brother Guilliman and now have many sons.
I use only prozen resin.. Rarely i pull a failed print
Great video. However I have great doubts about this printer. This 'crispyness' would look awful after painting the models.
My slicer shows print time as 1hr 52 min but my printer displays 3.5 hrs !!! Please help
Honestly, it's very rare any slicer reports an accurate print time. It's just an ESTIMATE. Slicers generally update periodically and make adjustments, which hopefully makes them more accurate. But for the most part, just think of it as a GUIDELINE and not a fact.
@@vogman sir i understand that however my printer takes very long time to print ! Even a normal ring took 4 hrs to print
I hope you are ok now sir!
I'm getting better every day, thanks Hassan 😁
nice ! sepsis isn't a great holiday at all !
Too right 😁
well single Z, as bad as usual, just print screen at 7:18 - paste in Paint and zoom on the left leg, thats lot of layers there, Anycubic just never listen to customer feedback
I don't think that there's a discussion about the fact, that the antialized print was way better.
Yes... better when magnified. But in the hand, both look excellent 😁
@@vogman Yeah, I believe you, any chance you will have a Hitry Rocket 1 in the future? I am a bit hyped for that machine, have a great weekend.
Can't read the settings 😭😭😭😭😭