100 points design: injection mold for fan wheel.
HTML-код
- Опубликовано: 11 сен 2024
- This video introduces the 3D model of the injection mould of the fan wheel. Created using mold design tool UG NX. The structure of this fan wheel injection mold is very classic. And the mold structure is not simple.
This mold structure design idea is sufficient to deal with most similar fan wheels.
The mechanism of the special curvature blade of the fan impeller and the mold of the fan impeller is complicated. The core of the mold is 9 sliders with inclined guide posts. Complete the upper half of the plastic part by pulling the core sideways. The ejection system of plastic parts is the second ejection. If you do not perform two ejects, the product will rotate after a short distance, so it cannot be separated from the plug for a long time. At the first distance, the core rotates and the plastic part is unscrewed. The second plastic part is ejected from the mold. There are 4 small holes in each blade of the impeller. Therefore, each slider needs a small slider to solve.
This mold is mind blowing to me, something like... I'm currently learning the basics about mold design and then this appears
That's awesome.
Is it Nx Siemens?
Awesome! Thanks for sharing this!
The problem is the temperature control, how do I get cooling in the slide?
Good job Good mould. From Turkey.🇹🇷
thanks
Main core insert rotate without any guiding it is how to possible and two bosses prevent to rotate it that also not possible to rotate to core please correct it
Amazing ! Thanks for sharing this!
Best channel
Thanks
Amazing video. Thanks lot
wonderful sir
This is amazing! I work with NX but my skill is nowhere near this. Where can I learn such tricks?
Hello! Really good job. Could You advise me whether it is study job or this is real mould design was later realized into the steel? If it was the real steel mould whether there were any issues with injected product warpage due to unequel cooling, especially core side middle. There are many small inserts have no separate cooling at all.
great job
I didnt understand how to turn the center turnning(?) core let me know how to turn the core thanks
Das Probelm ist die Temperierung, wie bekomme ich Kühlung in die Schieber rein?
Good
The colors seem so helpful. What software is this?
Maybe powershape colors
Tes soft is this
Siemens NX
I wish if I could work with you guys but this life won't let me do it
We should not compromise with life. Haha
@@SparkMould how can I join you guys I am serious
Please make a more videos tutorial please
Hi