Maybe you should pour and spread the polish on the floor and just use the bot to shine it. Polish always need a couple of minutes before you rub it down.
I thought it was better but that room has residual milk and other products you allowed to remain on that floor and should have been stripped first, to be fair to the Bona product. After college l worked for a company testing floor cleaners and finishers. Your test failed due to poor science and poor method. It was not the Bona. I just purchased the concentrate for professionals and applied the product to my bamboo floor and my ceramic tile yesterday. The result was a professional looking job. 😊 Today, l will complete all of floor level 1. I have been doing this for 34 years and the bamboo floor looks like a new install in the year 1990. 😮😊😮 Your tests make me smile and sometimes 😂 laugh out loud. Enjoy your channel. ❤
You need to use the no dry polishing liquids. Because you are not rinsing, but it will be interesting to use the wet mops and then use it dry, so it will polish.
Intresting never thought of using braava to do this, the sweeping mode should be able to do it. My only concern would be cleaning out the. reservoir and the wicker part but pre moist pad good start. My Braava is the white one that used the cube, old but work just fine
Samsung states you shouldn't put anything but water into it. I've sent them an email to see if they are working on one that can use a disinfectant cleaner.
Thanks for the review! It looks like the makers of the Samsung have figured out robot mopping; it looks far more effective than a back & forth approach by Roomba. Question, @AdamsTechReviews, how does the Samsung do with avoiding low pile/lying rugs? I see in your videos you have boxes and 2x4's to section off the room, but how would it do without those? Once the pads are dirty, I wouldn't want the Samsung to go along the edge of a rug and grind dirt in from the pads.
Could you share how it works to clean bathroom class or wall handheld vertically? Also I wonder how fast the two pads turn, try to get a sense how powerful they are if doing some hand cleaning. Thanks!
I was thinking amuck heavier duty rig. More weight, more powerful motors. I put down epoxy and my last batch was defective requiring sanding and polishing. It would laugh at the Samsung.
Does your robot bumps a lot into furniture? Mine does that and it already has a lot of scratch marks in its body, even the black sensors part has scratches...
Maybe you should pour and spread the polish on the floor and just use the bot to shine it. Polish always need a couple of minutes before you rub it down.
I thought it was better but that room has residual milk and other products you allowed to remain on that floor and should have been stripped first, to be fair to the Bona product. After college l worked for a company testing floor cleaners and finishers. Your test failed due to poor science and poor method. It was not the Bona. I just purchased the concentrate for professionals and applied the product to my bamboo floor and my ceramic tile yesterday. The result was a professional looking job. 😊 Today, l will complete all of floor level 1. I have been doing this for 34 years and the bamboo floor looks like a new install in the year 1990. 😮😊😮 Your tests make me smile and sometimes 😂 laugh out loud. Enjoy your channel. ❤
Vinegar and water should clean really well and give a nice shine.
You need to use the no dry polishing liquids.
Because you are not rinsing, but it will be interesting to use the wet mops and then use it dry, so it will polish.
Yeah. I came to this conclusion as well maybe a different cloth could be best for shining floor
I would try the polish again but putting the liquid directly on the floor aswell.
Intresting never thought of using braava to do this, the sweeping mode should be able to do it. My only concern would be cleaning out the. reservoir and the wicker part but pre moist pad good start. My Braava is the white one that used the cube, old but work just fine
Samsung states you shouldn't put anything but water into it. I've sent them an email to see if they are working on one that can use a disinfectant cleaner.
Have you heard anything back about it?
@Bre Patterson I have not. I went with the iRobit Breva M500.
I wonder how it would work with Rejuvenate? That could be a fun test.
Love your videos on this bot. What is your experience with it in cleaning larger areas. What setting or mode do you use
Which product can be added to the water for a better result?
I've been searching and samsung don't sell these here. But I found IDENTICAL looking EVERYBOT Edge... I wonder what is going on
Thanks for the review! It looks like the makers of the Samsung have figured out robot mopping; it looks far more effective than a back & forth approach by Roomba. Question, @AdamsTechReviews, how does the Samsung do with avoiding low pile/lying rugs? I see in your videos you have boxes and 2x4's to section off the room, but how would it do without those? Once the pads are dirty, I wouldn't want the Samsung to go along the edge of a rug and grind dirt in from the pads.
Could you share how it works to clean bathroom class or wall handheld vertically? Also I wonder how fast the two pads turn, try to get a sense how powerful they are if doing some hand cleaning. Thanks!
Yes I can try that
Strap some sand paper on it and see if it will sand the floors!
LOL that would be good
Good mop, needs a better algorithm. Also needs to be smartphone compatible
Yes if they made it smart and could map a house it would be amazing.
Does it avoid carpets?
What if you used a pump sprayer and covered the floor with mop n glow or something similar, then did something else while samsung did the polishing.
How long do you think it would take samsung jetbot to clean 1,000 sq ft?
Quite a while and would probably have to refill the tanks.
Is this also sold as EVERYBOT EDGE?
I was thinking amuck heavier duty rig.
More weight, more powerful motors.
I put down epoxy and my last batch was defective requiring sanding and polishing.
It would laugh at the Samsung.
What about mop n glow.
Good video. It seems like it could cover more ground but I guess not haha
Does your robot bumps a lot into furniture? Mine does that and it already has a lot of scratch marks in its body, even the black sensors part has scratches...
Yes sometimes.
@@AdamsReviews I was thinking about sending it back, thanks for the reply.
Have you tried it with the bleach cleaner
What type of floors are those ?
How much bona did u use
You make Samsung jet vs narwal robotics clean..... ?????
No, I heard the narwal is a really bad robot.
There seems to be a clone of this bot called Everybot Edge. Comes with a janky looking remote.
Yes there is.
Can you use bleach cleaner
THERE IS NO DOCK -VERY ANNOING but nice vidio
Lol bona
This piece of sht stopped working after 10 month