If you could, make a dedicated video about the ZY Play app as a whole. I just want to know what those W and T buttons on the left and right side of the virtual joystick when connecting the Weebill S (without Image Transmission) to the app are. Please explain each and everything if possible!
Zid Kumar yes, you are not the first to ask this question, so I will do a more in-depth video series. But to answer your question, I can't find any use of the buttons.
Please help me with a couple of questions. 1. Will this work with the Canon 250D aka Canon SL3? 2. I know this gimbal has different packages, however, how does the Follow Focus work, and will it work with my camera? 3. Would the transmission also work with my Canon?
I would beleive that you can put a CANON SL3 on and it will ba able to hande the weigh. But the height might be an issue for underslung mode. you have to test this at a delaer. The follow focus works great. and if you use the rubber bands it will work with any camera. The transmission system is a stand alone product, so if your camera has hdmi output, you should be able to transmit to you phone
Hi Peter...your movies are very nice! My compliments! What is your favourite lens to use on gimbal Weebill s with gh5? Lumix 12-35mm f2.8 or sigma 18-35mm f1.8? Thanks a lot!
Hi. Thanks for the great video. It was a lot of help. How did you attach the AgimbalGear to the weebill? The connection with the two screws is too big. And the screw on the tripod is too short to connect it to the AgimbalGear and gimbal
Hi, I did not have any issues wiht it, i screw the tripod to hte buttom of the L gimbal gear grip and added a zhiyun quick setup plate on top be able to take it off the gimbal fast. If it does not fit on your gimbal you shoud send i back.
@@PeterMakholm Thanks for your reply. Turns out the one I ordered was actually the wrong one. Have sent it back and since then received the correct one and it's all up and running.
I have the receiver unit. But It doesnt really show up any display on my liliput A7S 4K monitor. I bind both Transmitter & Receiver & fully charge both unit.
Dato Aliff Alex have you paired the transmitter & receiver. If not, do this by connecting them by the USB micro cable. On the receiver press on button 5 times. It will blink. Press on button on transmitter 5 times. It will blink. Wait until both are solid green. They are paired.
Q/R couplings are disappointing since they don't use the locking pins to prevent loosening on the underslung position. I'm not seeing that the transmission app is worth the transmitter's price and hassle. I can use the Panasonic Image App or Nikon's Snapbridge and use the gimbal's controls to use my phone as a monitor.
Yeah, I have no idear why they haven made the holes for the pins. I don't think the wireless system is worth the money. I am not using it. I only use a small hd monitor. You can connect the gimbal with you camera and by cable and adjust the settings from the gimbal, but not transmit an image to your phone wihtout the wireless system.
I cant see the Transmitter on wifi. FML. I have camera, zhiyun is reset to default. Yet i cant see the transmitter on wifi. Do i press the button? Please let me know what im doing wrong. I have the weebill S All works but man me trying to get my Monitor to work has been a nightmare almost 2 hours now
New Era Sports Media the transmitter is made for the weebill S. But it is an individual unit so you should be able to use it with any gimbal if you can get mounted on there.
@@PeterMakholm Is the Weebill Lab S mounting plate different than the Weebill Lab? Also will the transmitter allow you to live stream through smartphone?
I Dont have my weebill lab here right now. So I can't tell you 100%. But I Don't think you have the mounting holes for the base plate. Yes you can go live, but I have not tested it.
Hi Peter, I have a feelworld 5.5" monitor with HDMI in & out that I will be using on the gimbal, can you loop through the monitor back to the transmitter so I have a monitor on the gimbal and the client can view on an ipad wirelessly? Thanks.
Thanks Peter, For your great videos. I can connect the transmission to the phone, but it says there is no Wi Fi connection. I don't want to use my home Wi Fi because what about out in the field. I tried creating a Wi Fi hotspot in my phone, but that didn't work. I don't know why it says there is no Wi available- there is heaps of data on my phone?! Do you have any suggestions?
@@PeterMakholm Sorry Peter, have found out what was wrong (using ZenFone 6), needed to tap the connect button (to turn image on) on the phone screen (the Wi Fi connected symbol became active in the top left). I have slavishly followed your recommendations with the extra tripod mounts and the Zhiyun release clip and the small mount for mic. Keep up the good work! Thank you
Dear Peter, I hope you are well. Following your instructions, I have the Weebill S set up with the transmission system in place. There is connectivity on my phone, everything seems to work O. K. BUT, when I tap the lower left (on my phone screen) symbol to start the follow mode (which was the main reason I got the transmission system), then draw a rectangle around my face (or any object), the gimbal then goes haywire and the camera spins around then stops upside down. Do you have any suggestions? Regards Newell
Hello Peter, is it possible to have with the GH5 the “wireless transmission” connected to iPhone plus a monitor “SmallHD FOCUS 5” setup and get a picture from the camera parallel to both devices? Also is it possible to setup the monitor “SmallHD FOCUS 5” via HTMI cable and not wireless? Do you have made already a video where this configuration shows? Thank you in advance for your answer.
Walter Zeller hi Walter. Yes it is possible to run multiple monitors at once. But you will need the wireless receiver on the small HD. Then you can both monitor and iPhone at the same time. If you want to connect with cable, just plug the hdmi in to the camera.
I havn't been able to find anything regarding this, but is there any attachment that I can mount a battery bank onto for the Weebill? Switching Sony batteries every hour or so during a wedding can be very tedious!
Is this a reliable system? How does it permorm in real situations ? The hdmi signal and remote controller are good? And what about focus pulling through external controller? Is it good? I don't know it I should buy this complete system (that seems to be fa fantastic) or buy a hollyland 300 pro with a moza iFocus for monitoring and pulling focus. What do you think?
So I guess the Weebill S doesn't have the wireless connection transmission as the Weebill Lab did. We have to purchase the Transmission to get the wireless ZY Player Monitor
Hello Peter, I saw a video which you mentioned that the transmount transmitter is also compatible with the Weebill Lab, if that is possible can you make a video on how to connect it?
Eli Hi Eli. No it is only compatible with the weebill lab. If you want to use it for the weebill lab, you can use it to transmit the image from your camera to your phone, and nothing else.
@@PeterMakholm that sounds great, thanks for your response. Does that also means that I can use it with the new transmount receiver couple with the remote controller on an external monitor?
Eli yes. As long as you can find a way to mount the transmitter to the camera you can use the new remote and receiver. It works like any other image transmission system.
hey thankyou forthe video ! So i have a prblm i think with my zhiyun image transmitter because when i put on the hdmi on my gh5ii or my gh4 the camera's bug! i have a black screen and a red light on hdmi light on the transmitter ... please can someone help me
Hello Peter, thank you for the great video. Question: Is it possible to touch the phone monitor to get focus. Same as touching the GH5 monitor. Also is in the MF mode the AF icon available on the phone monitor, again same as showing on the GH5 monitor.
Walter Zeller thanks. No it is not possible to do touch focus on the phone monitor. You will have to use the zoom function on the phone but it is hard to nail perfect focus. I would rather ad the follow focus motor and use the wheel.
Great Video i watched almost all of your Weebill S videos, they were a huge help for me. :) Just do you know if there is an option to connect your camera to a monitor with HDMI cable and then from the monitor HDMI out port to connect the image transmitter? I tried but im receiving "Unable to adjust parameter please re-connect or change camera settings or contact service center" I was wondering if there are like settings that i might set or it's just not possible? P.S - My monitor is Feelworld Lut6. I have used the monitor HDMI out to connect the image to a laptop, so im positive that the port is working.
Thanks for the video. It has been very helpful since I just got the weebill s. It's a great gimble. If this is not proper etiquette, but what is the song called in Austria montage? If you don't want to answer that, it's all good. Thanks again.
Thank you for the video @Peter Makholm. I just got Weebill S with the transmission kit. I'm new to gimbals and when trying to balance the camera with the transmission attached I can get the camera and transmission device balance on the plate plane but when trying to balance the camera with the transmission when the lens is facing upwards it doesn't balance, always fall forwards then when you do manage to balance it with the lens facing upwards then the first balance (plate plane) no longer balance, do we need to balance that axis? Also you talked about plugging in the external monitor to the gimbal, which port on the gimbal is for the monitor?
Hi. There are four balance points. Starting from the bottom Pan axis ( sideways) Tilt axis (sideways) roll axis ( up and down), it is on the ROOL AXIS, you have the base plate mounted to the camera. There are two adjustment points here. First, lock the pan and tilt axis, so you only have the roll axis to work on. Slide the baseplate with the camera on and adjust until you have balance. If the camera doesn't balance when pointing it up. ( it rolls forward again) You have to adjust the height of the roll axis arm. Loosen the screw with the small handle in the front and lift the whole arm till you get it to balance. You might have to go back and adjust the base plate a bit to get a perfect balance. I hope this will get your gimbal balanced.
Automation Professionals I would still get the gimbal grip. This one is a bit closer to the gimbal so i can reach the follow focus wheel with my finger, if needed. I haven't used the transmission that much. When the transmission handle will come I will do some more testing. I will not use my phone as a monitor, I prefer a real monitor.
@@jnanadas My monitor is connected directly via HDMI to the camera. If you go back an wathc my vidoe how to get better gimbal footage you can se how the monitor is conected to the camera. ruclips.net/video/KQU2D0iajCA/видео.html
Hi Eric, yes, if the wireless module is connected to the gimbal, it will be charged by the gimbal, so it will last as long as you got battery on the gimbal.
Hi, if I need to pull focus during a recording, I use the follow focus motor. But mostly, I set my focus point manual before I start recording and hold the same distance to my subject or talent.
@@PeterMakholm Is it possible to touch the mobile phone to get the focus, select face or point - same as when touching the screen on the camera or mobile phone when using the the Panasonic mobile app?
Stanislav Miler Hello Stanislav, hello Peter. I have they same question in mind. Is it possible to touch the phone monitor to get focus. Same as touching the GH5 monitor. Also is in MF is the AF icon available on the phone monitor. Did you get any answer? By the way, thanks for the great video.
Hi peter you are my inspiration on getting the weebill s now I am looking into getting a larger screen, but how do you get to connect the screen wirelessly to the image transmitter?
I am also thinking of buying the Weebil S + transmission. However, is it actually practical using the transmission on a shoot or is it just a gimmick? Like latency issues, connectivity issues or distance-wise you need to be right next to it?
Hi, Peter: Thanks for the video...here's my question-can I use the auto zoom function from my cell phone, make any connections to this gimbal from my cellphone WITHOUT buying the wireless transmission? I really need to have as low a profile as possible. In other words, if I want to use my cell phone on this gimbal as a monitor I need the transmission unit? I have a Sony A6600. That camera comes with its own bluetooth/wifi connection.
Hi Peter, Thanks for creating this video. I am trying to look for a more in depth video on the image transmission but cannot find one. Can you advise if you can control the gimbal movement via the same app connected to the wireless transmitter. I could not see an option on your video. what other camera controls are available when directly connecting to the transmitter apart from record?
Davinder Rajput many of your questions should have been answered in tomorrow's video, du my wireless unit is not working properly so hopefully next week. But yes. You can control the movement with your phone when connected. Then you can active track a subject. But as soon as I get a new unit I will post a on this topic.
Always nice, Peter :-) Just waiting for the WL system. Talked to Focus Nordic last week, and they were not 100% sure, when it would come - do you know more? Thanks :-)
Hi Peter. Tell me, if you use the transmitter in conjunction with ipad mini3, does it lose much in screen brightness compared to smallhd focus 5 800nit? I understand that this is a poor comparison, but I am puzzled by the choice of which to take first, since the ipad would help me to work with the copter, but if it is too worse than focus5 then I will buy it first.
There appears to be two versions of the 'Quick release adapter', the one like yours and one which is almost the same except having a concave detail around the circumference? These appear to be slightly more expensive, I wounder if this later is more suited for heaver setups?
Aloha Peter, I am trying to use my small HD Focus monitor with my sony A7lll on the weebill S but can't get it to work. What monitor and camera are you using? Are you using your phone as a monitor and controlling it with the app? It doesn't seem like you are because you showed us your setup with an external monitor and the mounting apparatus that you use. Thank you for your help.
@@PeterMakholm Yes, thanks Peter. I have done that but then i cant use the gimble to start/stop the camera. I just wish that everything would communicate!! i guess I can start and stop video with my little wireless remote. Another question..... When my wireless camera module for the gimble arrives will I also need to purchase a receiver to place on the Small HD in order for it to receive the signal wirelessly? Thanks again!
Great NEW content about the gimbal, thanks! I bought the transmitter, still in transit, thinking that I needed it to control the gimbal, but then I tried the app with my phone and could control it, no image, but could control it. So what’s the transmitter for? I’m so new at this! Will sub to watch your upcoming vids on the weebill S. I like it so far but don’t know how to use it. Thanks!
Her Soul Vacation thanks. No the transmitter is only so you can transmit the image from your camera to your phone or with the receiver to an external monitor. You can control the gimbal in the app without the transmitter.
@@PeterMakholm Yes, I know I can control the gimbal with the app. But I bought the transmitter so I can not only control the gimbal with the app through my phone but also so I can SEE what's being transmitted on my phone. I have bought 3 HDMI cables and none of them work. The instructions don't specify what type of input is in the transmitter but I 'suppose' is a mini as a regular HDMI is too big. I have the Sony 6400 that has a micro HDMI input so I guess I need to buy a mini HDMI to micro HDMI. This is so frustrating to me as I've wasted time with such a small thing. I looked for a link of yours but didn't find any. What type of HDMI is the one you are showing here. Also, as a newbie I don't understand the difference between the transmitter and the receiver. It seems self explanatory but... IDK maybe I'm just frustrated.
@@HerSoulVacation Alright, had the same problem with finding the correct cable the cable you need I an HDMI to HDMI micro, I use the ones from atamos. I will leave the link here amzn.to/33Zd3GX Both the transmitter and receiver have HDMI mini ports. Most monitors have a full HDMI port, so you probably need an HDMI mini to HDMI full for the monitor. amzn.to/2PoJR71 The transmitter is the one you put on the gimbal and connect to the camera to (transmit the image from the camera). The receiver is the one you connect to an external monitor to (receive the image for the camera). Hopefully, you find this useful.
Hi, thanks for the video. I have a transmitter and I would like to buy a receiver too. But here in Germany, I can't find it anywhere. Do I have to buy the same module or the receiver is different than the transmitter? Thanks!
Thanks for the video. I had the Weebill Lab and the transmission was very laggy. I now have the S and am thinking about buying the transmitter, but do not want to if it is still bad. Your thoughts please?
So the HDMI cable from the Camera to the field monitor doesn’t get in the way of the gimbal movement? Can you provide a link to the cable your using? I’d imagine the thinner the cable the better?
Hi, the small HD i connect directly to the camera using the HDMI cable. The Transmission system you will need both the transmitter and receiver to connect wireless. My wireless transmitter is not working probberly, so I am waiting on a new one. When it arrives, I will make videos on how to use it.
Hey dope video! I recently bought the setup with the wireless transmitter and everything works but do you know how to add luts? If you do..can you make a video about it..works better for me 😎 thnx and keep up the good work!
I use the cable for the monitor on my gimbal. the monitor I have on in this video is broken, therefore i did not attatch a cable. If you want wirless transmision to a monitor you need the wireless transmission reciver.
is it possible to setup the weebill s to stream to something like Blackmagic ATEM Tv Studio Pro HD Live Production Switcher? I really need that setup if possible. to enable crew-less operation and still get the object tracking capability.
Hello Peter, here one more question regarding having a “SmallHD FOCUS 5” + “wireless transmission” installed to the GH5 parallel. If I want to connect the “SmallHD FOCUS 5” directly by HTMI cable to the GH5, is it then still possible to have the “wireless transmission” "ZIHYUN Transmount" connected to the GH5? As the "ZIHYUN Transmount" needs also a HTMI connection to the GH5. What I want is, to have the “SmallHD FOCUS 5” directly on the GH5 and away from the GH5 a iPhone or iPad connected wireless via “wireless transmission” "ZIHYUN Transmount. Any way to make that possible? Thank you in advance for your hint.
Walter Zeller Thanks, to do this you would have to connect the wireless transmitter to the monitor and get the HDMI signal from there, but there is not an HDMI out on the small HD focus. So it is not possible.
@@PeterMakholm Peter Thank you. And yes, this would be the solution. There is the Portkeys BM5 II monitor portkeys-europe.com/portkeys-bm5-ii-hdmi-sdi-5.2-touch-screen-monitor-2200-nits-mit-3d-luts it has signal out: "3G/HD/SD-SDI" perhaps SD-SDI would work?
Is it only compatible with Weebill-s as I see you connected the transmitter through some cables with the gimbal it self was that only for the charging purpose?
Aditya Basu it is a stand alone product that you can use with any camera to transmit the image. The tracking mode and other features as camera control is only available when connected to the Weebill S
Hi Peter, do you still use the transmission module? Did you finish the in depth review of how to use it with camera + app and phone + external monitor? If not, Zhiyun has one as below: ruclips.net/video/2zXwwp8jkDA/видео.html Sorry am late to this video so you may have figured it out already.
Hi. Thank you for this video its really helps. i have one question, a real monitor is better or a phone? and why?
If you could, make a dedicated video about the ZY Play app as a whole. I just want to know what those W and T buttons on the left and right side of the virtual joystick when connecting the Weebill S (without Image Transmission) to the app are. Please explain each and everything if possible!
Zid Kumar yes, you are not the first to ask this question, so I will do a more in-depth video series. But to answer your question, I can't find any use of the buttons.
@@PeterMakholm Hope Zhiyun itself comes up with a tutorial of some sort to clear the confusion of Weebill S users.
@@zidkumar yes, there are still a lot of loos ends on the weebill S system.
Great video! Thank you so much! Incredibly informative!
Please help me with a couple of questions.
1. Will this work with the Canon 250D aka Canon SL3?
2. I know this gimbal has different packages, however, how does the Follow Focus work, and will it work with my camera?
3. Would the transmission also work with my Canon?
I would beleive that you can put a CANON SL3 on and it will ba able to hande the weigh. But the height might be an issue for underslung mode. you have to test this at a delaer.
The follow focus works great. and if you use the rubber bands it will work with any camera.
The transmission system is a stand alone product, so if your camera has hdmi output, you should be able to transmit to you phone
@@PeterMakholm thank you very much
Hi Peter...your movies are very nice! My compliments! What is your favourite lens to use on gimbal Weebill s with gh5? Lumix 12-35mm f2.8 or sigma 18-35mm f1.8? Thanks a lot!
Hi, Thanks mate. it is the 10-25mm f1,7 lumix lens. it is amazing. But for a lighter setup i like the 12-35mm f2,8.
@@PeterMakholm Have you ever tried to use sigma 18-35mm on your Weebill s with gh5?
@@manuelchesini1781 No, but a colegue of mine has it and it works fine. it is a bit harder to get perfect ballance. then the 10-25mm.
Thanks, finally a video of the wireless system. Love you Austria video. keep creating.
Always a pleasure to be able to help.
Hi. Thanks for the great video. It was a lot of help. How did you attach the AgimbalGear to the weebill? The connection with the two screws is too big. And the screw on the tripod is too short to connect it to the AgimbalGear and gimbal
Hi, I did not have any issues wiht it, i screw the tripod to hte buttom of the L gimbal gear grip and added a zhiyun quick setup plate on top be able to take it off the gimbal fast. If it does not fit on your gimbal you shoud send i back.
@@PeterMakholm Thanks for your reply. Turns out the one I ordered was actually the wrong one. Have sent it back and since then received the correct one and it's all up and running.
I have the receiver unit. But It doesnt really show up any display on my liliput A7S 4K monitor. I bind both Transmitter & Receiver & fully charge both unit.
Dato Aliff Alex have you paired the transmitter & receiver. If not, do this by connecting them by the USB micro cable. On the receiver press on button 5 times. It will blink. Press on button on transmitter 5 times. It will blink. Wait until both are solid green. They are paired.
How did you connect the external monitor to the camera? The wireless transmitter just connects to your phone...
Fire trip to Austria. Great video.
Thx. It was really great. We lost two days of filming because of the snow storm.
Q/R couplings are disappointing since they don't use the locking pins to prevent loosening on the underslung position. I'm not seeing that the transmission app is worth the transmitter's price and hassle. I can use the Panasonic Image App or Nikon's Snapbridge and use the gimbal's controls to use my phone as a monitor.
Yeah, I have no idear why they haven made the holes for the pins. I don't think the wireless system is worth the money. I am not using it. I only use a small hd monitor. You can connect the gimbal with you camera and by cable and adjust the settings from the gimbal, but not transmit an image to your phone wihtout the wireless system.
I cant see the Transmitter on wifi. FML.
I have camera, zhiyun is reset to default.
Yet i cant see the transmitter on wifi.
Do i press the button?
Please let me know what im doing wrong.
I have the weebill S
All works but man me trying to get my Monitor to work has been a nightmare almost 2 hours now
Looking to know if you can use the transmitter module on Weebill Lab?
New Era Sports Media the transmitter is made for the weebill S. But it is an individual unit so you should be able to use it with any gimbal if you can get mounted on there.
@@PeterMakholm Is the Weebill Lab S mounting plate different than the Weebill Lab? Also will the transmitter allow you to live stream through smartphone?
I Dont have my weebill lab here right now. So I can't tell you 100%. But I Don't think you have the mounting holes for the base plate.
Yes you can go live, but I have not tested it.
@@PeterMakholm Thanks
Hi Peter,
I have a feelworld 5.5" monitor with HDMI in & out that I will be using on the gimbal, can you loop through the monitor back to the transmitter so I have a monitor on the gimbal and the client can view on an ipad wirelessly? Thanks.
Hi, I'm using a6400 with iphone X but having difficulties connecting the wifi, any advice on settings I need to change in my camera or iPhone X?
Hi thanks for the rewiev. I have two samsung phones both are not able to see the transmitter on wifi menu. Anyone had the same issue?
Sorry, I am an apple user. It works fine on the iphone.
@@PeterMakholm thanks for the quick answer!
Thanks Peter,
For your great videos.
I can connect the transmission to the phone, but it says there is no Wi Fi connection. I don't want to use my home Wi Fi because what about out in the field.
I tried creating a Wi Fi hotspot in my phone, but that didn't work. I don't know why it says there is no Wi available- there is heaps of data on my phone?!
Do you have any suggestions?
I can connect to the Wi Fi, but it says it is connected but there is no internet
Hi, That is strange. What phone are you using.
@@PeterMakholm Sorry Peter, have found out what was wrong (using ZenFone 6), needed to tap the connect button (to turn image on) on the phone screen (the Wi Fi connected symbol became active in the top left).
I have slavishly followed your recommendations with the extra tripod mounts and the Zhiyun release clip and the small mount for mic.
Keep up the good work! Thank you
Will now follow your example with a second handle.
Dear Peter,
I hope you are well.
Following your instructions, I have the Weebill S set up with the transmission system in place. There is connectivity on my phone, everything seems to work O. K. BUT, when I tap the lower left (on my phone screen) symbol to start the follow mode (which was the main reason I got the transmission system), then draw a rectangle around my face (or any object), the gimbal then goes haywire and the camera spins around then stops upside down.
Do you have any suggestions?
Regards Newell
can you do a youtube live using the wireless transmitter? thanks
Hello Peter,
is it possible to have with the GH5 the “wireless transmission” connected to iPhone plus a monitor “SmallHD FOCUS 5” setup and get a picture from the camera parallel to both devices?
Also is it possible to setup the monitor “SmallHD FOCUS 5” via HTMI cable and not wireless?
Do you have made already a video where this configuration shows?
Thank you in advance for your answer.
Walter Zeller hi Walter. Yes it is possible to run multiple monitors at once. But you will need the wireless receiver on the small HD. Then you can both monitor and iPhone at the same time. If you want to connect with cable, just plug the hdmi in to the camera.
I havn't been able to find anything regarding this, but is there any attachment that I can mount a battery bank onto for the Weebill? Switching Sony batteries every hour or so during a wedding can be very tedious!
Is this a reliable system? How does it permorm in real situations ? The hdmi signal and remote controller are good? And what about focus pulling through external controller? Is it good? I don't know it I should buy this complete system (that seems to be fa fantastic) or buy a hollyland 300 pro with a moza iFocus for monitoring and pulling focus.
What do you think?
Thanks Peter, was looking for that code. really helpfull video. have you tried to hook it up to a monitor.
Yeah, pretty wierd that they don't add it in the box.
So I guess the Weebill S doesn't have the wireless connection transmission as the Weebill Lab did. We have to purchase the Transmission to get the wireless ZY Player Monitor
Blinkit Photography yes, that is correct. You need the transmission unit to connect to your phone wireless.
Hello Peter, I saw a video which you mentioned that the transmount transmitter is also compatible with the Weebill Lab, if that is possible can you make a video on how to connect it?
Eli Hi Eli. No it is only compatible with the weebill lab. If you want to use it for the weebill lab, you can use it to transmit the image from your camera to your phone, and nothing else.
@@PeterMakholm that sounds great, thanks for your response. Does that also means that I can use it with the new transmount receiver couple with the remote controller on an external monitor?
Eli yes. As long as you can find a way to mount the transmitter to the camera you can use the new remote and receiver. It works like any other image transmission system.
Just remember that you ad extra weight to your setup.
@@PeterMakholm okay, thanks for the info.❤
From what I’ve seen it does not work that smooth with Canon. Have you tried Canon with this transmitter/gimbal? Thank you
hey thankyou forthe video !
So i have a prblm i think with my zhiyun image transmitter because when i put on the hdmi on my gh5ii or my gh4 the camera's bug! i have a black screen and a red light on hdmi light on the transmitter ...
please can someone help me
Hello Peter,
thank you for the great video.
Question: Is it possible to touch the phone monitor to get focus. Same as touching the GH5 monitor. Also is in the MF mode the AF icon available on the phone monitor, again same as showing on the GH5 monitor.
Walter Zeller thanks. No it is not possible to do touch focus on the phone monitor. You will have to use the zoom function on the phone but it is hard to nail perfect focus. I would rather ad the follow focus motor and use the wheel.
hey great video, thank you. How can i connect with a laptop? i like to use it with OBS Studio.
What an awesome video!! It's so helpful! Thank you!
Thanks, always great to hear.
Great Video i watched almost all of your Weebill S videos, they were a huge help for me. :)
Just do you know if there is an option to connect your camera to a monitor with HDMI cable and then from the monitor HDMI out port to connect the image transmitter? I tried but im receiving "Unable to adjust parameter please re-connect or change camera settings or contact service center" I was wondering if there are like settings that i might set or it's just not possible?
P.S - My monitor is Feelworld Lut6. I have used the monitor HDMI out to connect the image to a laptop, so im positive that the port is working.
WHERE IS THE LINK TO THE QUICK RELEASE transmount?
Sorry, I forgot to put that in. here it is. amzn.to/2ODQLGs
Did you buy yet?
I would look on ebay. They are $15 or $ 29 or 2.
@@MeAndMyOpinions_OverYours link?
Thanks for the video. It has been very helpful since I just got the weebill s. It's a great gimble. If this is not proper etiquette, but what is the song called in Austria montage? If you don't want to answer that, it's all good. Thanks again.
Hi. Thanks. the weebill S is a great choise. the song in the austria montage is. What to do - hallman
ruclips.net/video/tI2AhoVfO-I/видео.html
@@PeterMakholm I will check out the video and thanks for the song name. Thanks again and look forward to your new videos.
Thank you for the video @Peter Makholm. I just got Weebill S with the transmission kit. I'm new to gimbals and when trying to balance the camera with the transmission attached I can get the camera and transmission device balance on the plate plane but when trying to balance the camera with the transmission when the lens is facing upwards it doesn't balance, always fall forwards then when you do manage to balance it with the lens facing upwards then the first balance (plate plane) no longer balance, do we need to balance that axis?
Also you talked about plugging in the external monitor to the gimbal, which port on the gimbal is for the monitor?
Hi. There are four balance points. Starting from the bottom Pan axis ( sideways) Tilt axis (sideways) roll axis ( up and down), it is on the ROOL AXIS, you have the base plate mounted to the camera. There are two adjustment points here. First, lock the pan and tilt axis, so you only have the roll axis to work on. Slide the baseplate with the camera on and adjust until you have balance. If the camera doesn't balance when pointing it up. ( it rolls forward again) You have to adjust the height of the roll axis arm. Loosen the screw with the small handle in the front and lift the whole arm till you get it to balance. You might have to go back and adjust the base plate a bit to get a perfect balance. I hope this will get your gimbal balanced.
ruclips.net/video/fbsTiqtsye8/видео.html
Two questions?
Do u still recommend gimbal grip rather than Zhiyn which is on sale 50%.
How transmission system perform with 60fps and 120fps.?
Automation Professionals I would still get the gimbal grip. This one is a bit closer to the gimbal so i can reach the follow focus wheel with my finger, if needed.
I haven't used the transmission that much. When the transmission handle will come I will do some more testing. I will not use my phone as a monitor, I prefer a real monitor.
@@PeterMakholm I agree about the monitor thing. So how do you get the monitor to receive the signal from the module on the gimble?
@@jnanadas My monitor is connected directly via HDMI to the camera. If you go back an wathc my vidoe how to get better gimbal footage you can se how the monitor is conected to the camera.
ruclips.net/video/KQU2D0iajCA/видео.html
Nice video! Good Job!
Thanks.
Hi Peter, do you know if the ccs mode will work for Sony A6400?
Sorry Mate. I don't know that much about using the weebill S with sony cameras.
The battery life is 1.5 hours. If the transmount wireless is connected to the gimball. Is the battery life longer? If yes, how much?
Thank you
Hi Eric, yes, if the wireless module is connected to the gimbal, it will be charged by the gimbal, so it will last as long as you got battery on the gimbal.
@@PeterMakholm
Thank you and continue your good work with your channel!
Hi Peter, how do you focus with your GH5? With focus motor or electronic focus through GH5? Thanks a lot
Hi, if I need to pull focus during a recording, I use the follow focus motor. But mostly, I set my focus point manual before I start recording and hold the same distance to my subject or talent.
@@PeterMakholm Is it possible to touch the mobile phone to get the focus, select face or point - same as when touching the screen on the camera or mobile phone when using the the Panasonic mobile app?
Stanislav Miler Hello Stanislav, hello Peter. I have they same question in mind. Is it possible to touch the phone monitor to get focus. Same as touching the GH5 monitor. Also is in MF is the AF icon available on the phone monitor. Did you get any answer? By the way, thanks for the great video.
Hi peter you are my inspiration on getting the weebill s now I am looking into getting a larger screen, but how do you get to connect the screen wirelessly to the image transmitter?
I am also thinking of buying the Weebil S + transmission. However, is it actually practical using the transmission on a shoot or is it just a gimmick? Like latency issues, connectivity issues or distance-wise you need to be right next to it?
Hi. I would not trust the wireless system on a shoot. It sometimes shuts down. I would always go with an external monitor.
@@PeterMakholm ah thank you so much! I was planning to buy the wireless system but have my doubts because Zhiyun seems to always lack in software.
Hi, Peter: Thanks for the video...here's my question-can I use the auto zoom function from my cell phone, make any connections to this gimbal from my cellphone WITHOUT buying the wireless transmission? I really need to have as low a profile as possible. In other words, if I want to use my cell phone on this gimbal as a monitor I need the transmission unit? I have a Sony A6600. That camera comes with its own bluetooth/wifi connection.
Hi Peter, Thanks for creating this video. I am trying to look for a more in depth video on the image transmission but cannot find one. Can you advise if you can control the gimbal movement via the same app connected to the wireless transmitter. I could not see an option on your video. what other camera controls are available when directly connecting to the transmitter apart from record?
Davinder Rajput many of your questions should have been answered in tomorrow's video, du my wireless unit is not working properly so hopefully next week. But yes. You can control the movement with your phone when connected. Then you can active track a subject. But as soon as I get a new unit I will post a on this topic.
Always nice, Peter :-) Just waiting for the WL system. Talked to Focus Nordic last week, and they were not 100% sure, when it would come - do you know more? Thanks :-)
EzzenzDK thx, no same here. They don't know when they will arrive. Looking forward to the transmission handle.
Nice Clip. Can you help me? Which HDMI-Cable do I need using the Transmitter with my Nikon Z6?
What hdmi is there on your camera.
@@PeterMakholm It's HDMI mini-C
Andreas Blättner then you need a HDMI MINI to HDMI mini-c. The hdmi on the transmitter is an HDMI mini.
@@PeterMakholm Is HDMI mini-c the same as HMDI mini?
Andreas Blättner yes if you own a crane 3 lab. There is a hdmi mini to mini in there.
Hi Peter. Tell me, if you use the transmitter in conjunction with ipad mini3, does it lose much in screen brightness compared to smallhd focus 5 800nit?
I understand that this is a poor comparison, but I am puzzled by the choice of which to take first, since the ipad would help me to work with the copter, but if it is too worse than focus5 then I will buy it first.
Hi, what hdmi cable are you using for transmission?
There appears to be two versions of the 'Quick release adapter', the one like yours and one which is almost the same except having a concave detail around the circumference? These appear to be slightly more expensive, I wounder if this later is more suited for heaver setups?
Aloha Peter, I am trying to use my small HD Focus monitor with my sony A7lll on the weebill S but can't get it to work. What monitor and camera are you using? Are you using your phone as a monitor and controlling it with the app? It doesn't seem like you are because you showed us your setup with an external monitor and the mounting apparatus that you use. Thank you for your help.
John Bishop you should be able to connect your small hd to camera with no problem through HDMI
I use a gh5 with small hd focus. Try to connect the monitor to your camera without connecting the gimbal to the camera. It should work.
@@PeterMakholm Yes, thanks Peter. I have done that but then i cant use the gimble to start/stop the camera. I just wish that everything would communicate!! i guess I can start and stop video with my little wireless remote.
Another question..... When my wireless camera module for the gimble arrives will I also need to purchase a receiver to place on the Small HD in order for it to receive the signal wirelessly? Thanks again!
Do we need to buy 2 quick release screws?
Cherry and Trevor yes you need one for both attachment points.
Great NEW content about the gimbal, thanks! I bought the transmitter, still in transit, thinking that I needed it to control the gimbal, but then I tried the app with my phone and could control it, no image, but could control it. So what’s the transmitter for? I’m so new at this! Will sub to watch your upcoming vids on the weebill S. I like it so far but don’t know how to use it. Thanks!
Her Soul Vacation thanks. No the transmitter is only so you can transmit the image from your camera to your phone or with the receiver to an external monitor. You can control the gimbal in the app without the transmitter.
@@PeterMakholm Yes, I know I can control the gimbal with the app. But I bought the transmitter so I can not only control the gimbal with the app through my phone but also so I can SEE what's being transmitted on my phone. I have bought 3 HDMI cables and none of them work. The instructions don't specify what type of input is in the transmitter but I 'suppose' is a mini as a regular HDMI is too big. I have the Sony 6400 that has a micro HDMI input so I guess I need to buy a mini HDMI to micro HDMI. This is so frustrating to me as I've wasted time with such a small thing. I looked for a link of yours but didn't find any. What type of HDMI is the one you are showing here. Also, as a newbie I don't understand the difference between the transmitter and the receiver. It seems self explanatory but... IDK maybe I'm just frustrated.
@@HerSoulVacation Alright, had the same problem with finding the correct cable the cable you need I an HDMI to HDMI micro, I use the ones from atamos. I will leave the link here
amzn.to/33Zd3GX
Both the transmitter and receiver have HDMI mini ports. Most monitors have a full HDMI port, so you probably need an HDMI mini to HDMI full for the monitor.
amzn.to/2PoJR71
The transmitter is the one you put on the gimbal and connect to the camera to (transmit the image from the camera). The receiver is the one you connect to an external monitor to (receive the image for the camera).
Hopefully, you find this useful.
Hi, thanks for the video. I have a transmitter and I would like to buy a receiver too. But here in Germany, I can't find it anywhere. Do I have to buy the same module or the receiver is different than the transmitter? Thanks!
lol on that car stuck in the snow ! Great tutorial on the accessories.
thanks, yeah it took a while to dig it out.
Can you control the gimped and use the monitor at the same time?
Yes, that is no problemo.
Thanks for the video. I had the Weebill Lab and the transmission was very laggy. I now have the S and am thinking about buying the transmitter, but do not want to if it is still bad. Your thoughts please?
No, the transmitter works very well. the does not lag but there is a slight delay. but still fast enougt to use.
So the HDMI cable from the Camera to the field monitor doesn’t get in the way of the gimbal movement? Can you provide a link to the cable your using? I’d imagine the thinner the cable the better?
Yeah try the nanaosecond cables. amzn.to/2SsKPAC
Very informative, I bought the same setup based on your listing. Curious on how to use both the transmission device AND the small HD focus
Hi, the small HD i connect directly to the camera using the HDMI cable. The Transmission system you will need both the transmitter and receiver to connect wireless. My wireless transmitter is not working probberly, so I am waiting on a new one. When it arrives, I will make videos on how to use it.
@@PeterMakholm can you still use the phone app if your using the monitor
Hey dope video! I recently bought the setup with the wireless transmitter and everything works but do you know how to add luts? If you do..can you make a video about it..works better for me 😎 thnx and keep up the good work!
Hi Thanks, No my transmitter does not work probberly, so I am waiting on a new one. I will defently look at how to ad luts.
@@PeterMakholm o ok if i figured it out i'll let you know
Weebill S wireless transmssion setup walk throug. If you got problems the wireless system, this webill S video will guide you along.
So the transmission doesn't work without the app?
I havent been able to figure this out yet. still need another hdmi mini to hdmi. But as our test at the hotel, As of right now I would say no.
@@PeterMakholm Hmm maybe when you have it on the app, it works on both devices! We have to try again :D
@@Kingston0013 Yes, it should defently work. I can drop by your place during the week, and we can give it another try.
@@PeterMakholm Sound good! but I don't have a Mini HDMI to HDMI - let's meet up at our good friends at Focus nordic in this week :D
@@Kingston0013 Yes, good idea. See ya
lol..awesome...yep, power usually works.
with this transmission I can my Sony A7iii normally?
nduwimana basile yes it works great.
Thx so bro and I like what you do
how do you get the image from the gimbal to the monitor???
I use the cable for the monitor on my gimbal. the monitor I have on in this video is broken, therefore i did not attatch a cable. If you want wirless transmision to a monitor you need the wireless transmission reciver.
@@PeterMakholm Aloha again, Will the receiver work with my Small HD Focus monitor? And where can I find one of these receivers? Thanks
is it possible to setup the weebill s to stream to something like Blackmagic ATEM Tv Studio Pro HD Live Production Switcher? I really need that setup if possible. to enable crew-less operation and still get the object tracking capability.
I wish I could anwswer your question, but I have never tried to use the switcher system.
Hello Peter,
here one more question regarding having a “SmallHD FOCUS 5” + “wireless transmission” installed to the GH5 parallel.
If I want to connect the “SmallHD FOCUS 5” directly by HTMI cable to the GH5, is it then still possible to have the “wireless transmission” "ZIHYUN Transmount" connected to the GH5? As the "ZIHYUN Transmount" needs also a HTMI connection to the GH5. What I want is, to have the “SmallHD FOCUS 5” directly on the GH5 and away from the GH5 a iPhone or iPad connected wireless via “wireless transmission” "ZIHYUN Transmount. Any way to make that possible?
Thank you in advance for your hint.
Walter Zeller Thanks, to do this you would have to connect the wireless transmitter to the monitor and get the HDMI signal from there, but there is not an HDMI out on the small HD focus. So it is not possible.
@@PeterMakholm Peter Thank you. And yes, this would be the solution.
There is the Portkeys BM5 II monitor portkeys-europe.com/portkeys-bm5-ii-hdmi-sdi-5.2-touch-screen-monitor-2200-nits-mit-3d-luts it has signal out: "3G/HD/SD-SDI" perhaps SD-SDI would work?
Is it only compatible with Weebill-s as I see you connected the transmitter through some cables with the gimbal it self was that only for the charging purpose?
Aditya Basu it is a stand alone product that you can use with any camera to transmit the image. The tracking mode and other features as camera control is only available when connected to the Weebill S
Anyone know intro song name?
Ooyy - Teenage Lullaby
ruclips.net/video/cCksFktki5s/видео.html
Peter Makholm thank you so much!!!
@@lebavu8260 you are welcome mate.
should have at least show the latency
It is useable when connected to the iPhone, but if you want to use the receiver to a monitor, it is slow.
Hi Peter, do you still use the transmission module? Did you finish the in depth review of how to use it with camera + app and phone + external monitor?
If not, Zhiyun has one as below:
ruclips.net/video/2zXwwp8jkDA/видео.html
Sorry am late to this video so you may have figured it out already.