Это видео недоступно.
Сожалеем об этом.
How to upgrade a FAKE JBL XTREME 3 speaker (DIY SPEAKER UPGRADE)
HTML-код
- Опубликовано: 3 апр 2022
- Update: I found out after this video was uploaded that the speakers we're not in sync meaning one of the speaker drivers was wired wrong so it made the sound terrible and it didn't produce a lot of bass.
Here's the link to the video after I rewired it and it has amazing bass now!
• How to make FAKE JBL X...
This is the JBL Xtreme 3 mini (fake / copy), I have made some modifications to it and upgraded the speaker drivers and the amplifier. I made sure that I can still use the control buttons that came with it.
I hope you enjoy this FAKE JBL upgrade, please like and also comment down below if it was a good upgrade or I need to improve on it more.
READ ME FIRST!!!
After uploading this video it was pointed out to me that the speakers we're not wired correctly, which was true.
Everything is fixed now and I uploaded a new video of how much bass it has after the rewiring. 👇
ruclips.net/video/4Q484tq45a0/видео.html
Thanks for watching :)
Bʀᴏ ᴀᴄᴛᴜᴀʟʟʏ ɪ ᴅɪᴅɴᴛ ᴜɴᴅᴇʀsᴛᴀɴᴅ ᴡʜᴀᴛ ʏᴏᴜ ʀᴇᴡɪʀᴇᴅ😢
Some camera shots looked out of phase but others in phase so I thought it was just the camera refresh rate.
Name song?
The reason the pasave radiators aren't moving much is because the speakers are wired out of phase so when one goes out the other one goes in you will need to open the speaker and switch the wires round on one of the drivers
I actually followed the labels on the amplifier correctly but I guess the factory made some mistakes and reversed it, going to be a pain opening it now.
Lesson learned, need to double check these before using adhesive.
Ye I had the same easy fix when you are inside the speaker but when not it is a hard fix
Or airleaks
Didn't understand please explain
@@shel1282the radiators only work when both drivers are moving the same way
I don't know why they put those tubes in front of the speakers. It must make it sound like you're talking into a tube!
It's out of phase, one connection is inverted. My connection on the board is
power speaker speaker
+ - + - - +
this is the connection if you look from the top of the board. by the way how long can you use it from full charge to low battery?
My connections were correct I just found out later the other speaker was wired wrong, I already switched the wires on that one and posted a video of the results ruclips.net/video/4Q484tq45a0/видео.html
Anyways about the playtime, I'm not really sure but it can go pass 6 hours easily if I use at around 50% volume.
the reason why the thing doesnt push the passive radiator more is cause the speaker is rated to have a smaller container and is a backwrd fired frequecy unlike the previous one that uses more air movement
That's what I thought at first but I was wrong, the problem was the speakers was out of phase. I rewired one of the speakers and it can now move the passive radiators like CRAZY.
Here's the link to that video for proof
ruclips.net/video/4Q484tq45a0/видео.html
@@TaylorSoloaiJR noice was about to comment the possibility that it might be out phased since the of both the previous speaker and the one was the same well it's good that you fixed the problem u v u
It's good that I have viewers that know more than me because I wasn't going to change a thing and throw them away 😂
Hi. Im about to upgrade my fake jbl xtreme 3 mini. Can you please make a diagram of wiring from potemciometer to control bosrd thank you
Nice upgrade 👍
How about 3 inch full range drivers
Not enough space
Ganda ng upgrade
Like restauration box facke and Original Jbl
👌basslike
,how if used 3inc speaker instead of 2 inch?
You can, just need to modify the enclosure for it to fit.
0:01 awesome bass
Super bass ☺
What kind of battery do you use?
lithium ion (18650)
Aí sim ficou mais boa do que tava 👍👍👍
nice bass!!!
Thanks, but I'm still not happy with it. I need more bass. Haha
@@TaylorSoloaiJR Lol XD
also.. im thinking if you used jbl go 3 drivers on that? great help if you reply! i was trying to make my own with good bass...
In my opinion, JBL GO 3 driver will not be enough. I think they're too small just like the one I used.
I'm actually thinking of using something around 2.5 inches and not as cheap as the one I used.
Moral of the story is, don't go for cheap speaker drivers. They will never sound good.
@@TaylorSoloaiJR ok thank you sir!
Yeah they are, i just realized it when I was watching the video. I guess they marked the + and - for the other speaker terminals wrong.
I said the updated speakers name
Super bass
Bro how much did you buy this for I bought the same thing for 100$ and honestly thinking of keeping instead of returning
Wait you bought the fake for $100USD? Thats so expensive, I got this fake for less than $10USD (thats without the upgrades of course).
Where did you buy the fake one bro?
@@jonesvybz5368 temu I have the link if you need it
Is it okay to use hot glue instead of T700 to make it air tight?,and use the same speaker?,just asking
Yes you can use hot glue to seal it. You can use whatever speaker driver that fits the enclosure.
👍
Damn, that’s more airtight than my JBL Charge 3 lol
Haha but your Charge 3 will still sound better
Nice
I recomend covering these holes so no ugly small bass
it can be done but no need if the cover will be installed back
what amplifier is it worth?
That question doesn't make sense.
ilang inch speaker ginamit no lods
2 inch speakers
Day 2 of requesting. Can you review PAM8403 and try to upgrade the speakers of the Fake Xtreme 3 with a bigger one
Don't worry that amplifier review is coming.
Omgg Thanks sooo much 😄😄😄😄
What is the speakers name
Its doesn't have a name / brand
Sony Xb31 replacement speakers from shopee do best but maybe add one tweeter idol. Nag upgrade den ako idol sa jbl xtreme fake ko. Grabe movement ng passive nun tas neodymium magnet na.
Or siguro
May tag 200 na 2 pcs na aiyima speaker sa shopee 15w rating di ko alam kung okay ba sound quality non. At mejo malaki magnet nya baka di ma ipasok ng maayos.
Sony xb31 replacement speaker is 250+ price per speakrr
Thanks for the suggestion, just waiting on my budget. When it arrives I want to try the Sony speakers. They look strong.
No prob fellow modder here
Wɔ afe no nso w ɔboa nso na na ɛwɔ me man ɛwɔ pa kuro the new na
Maybe use a Aiyima speaker driver
It may inproved
Btw nice upgrade
Yeah I'm actually looking for some right now I might use that brand
I think this is a JBL go 3 woofer
Looks like it but on the listing it says it's for the clone JBL charge 3
where'd you buy the drivers?
Shopee PH
@@TaylorSoloaiJR link?
Shop doesn't exist anymore on Shopee, sorry.
What model speaker?
koleer s8012 look
Distorce da matti
Those radiators aren’t great
Yeah I need to find some new radiators for the next upgrade
динамики работают в противофазе...
Yeah you're right
What would you have done different apart from what I mentioned in the video?
It not airtight
And no logo
I love your posting a new video 😻😻😻
@@princenelalbitojblchargemi6288 you clearly didn't watch the whole video, it's air tight.
I watch it all and passive radiator moving
Ахахаххаахахахахапхахахахахахахпхпхппхппхаххп
🤣🤣🤣🤣🤣
Facebook reveal idol
I will soon
@@TaylorSoloaiJR Now
😂
@@TaylorSoloaiJR now
WTF.. let him be, no need to ask for someone’s Facebook
Relax the skeleton of the brain. Change one of the loudspeakers in the positive and negative directions to vibrate the base of the armpit well.
It's already been fixed, already uploaded the video.
Same sound 🤣🤣
Read the pinned comment first 🤦♂️