Hi Kumaran, Thanks for your informative video about the Timer. I was trying to turn on the 1.5hp submersible pump Auto ON... but I see that the Pump starter gets the power but the submersible pump doesn't power on. I need to manually press the Green Power on Starter. Do I need a Contactor to Auto start? Please let me know.
I have been using TM-619-series Timer for the last two years satisfactorily. Basically I am using this for my ceiling fan so that it will put on at about 1.30 night after the AC timer is off. But yesterday i.e. on 13.9.2017 night as usual I set the time for 1.30 am (14.9.17 morning). Of course the timer was on automatically but at about 4.00 in the morning my fan stopped though I did not set the timer off. When I checked it the red light which normally is bright, was very dim and as the time went by it went off. Despite best efforts, the timer is not working. On checking, the battery appears to be working, though it has completed more than 2 years. Therefore, I would like to know what could be the problem. Will it be alright if I put a new battery or there could be some other problem with the timer itself. An immediate reply would be much appreciated.
Hello, very informative video. I have also purchased one from ebay, but there is some confusion with the wiring part, my model is TM-619-2 can you please help? The input part is ok but the output part is a bit confusing, it doesnt say which pin is neutral or phase simple pin number and load is mentioned. in my case pin number 3 and 5 comes under load.
Sir, u keep 1 hour rotational period for every two hour.. One hour rotation is good for the egg or what? What will happen if we set timer to rotate after every two for few minute?
hi, This is harshal, I want to know that, i am living at village site so we have light cut out problem, If i set the timer for any light their on time and that time main light gone after that their is no need to set all that time?
Dear Sir, I just bought this Timer and it works good as per your instructions, but when the timer is on (output is on), and then when there is a power outage, it does not flip back to on automatically. Ideally if I have set the timer-1 between 4:00pm to 5:00pm and if there is power outage at 4:30pm and then power comes back at 4:35pm, the output does not turn on (my application is a light). Kindly advise please. Thanks in advance for your help
I have been using this timer for sometime now. However it started to function erratically. Can you please suggest what could have gone wrong. I have set up 8 ON time and 8 OFF times. Gap between each On and OFF time is 25 min. Each of the 8 ON timings are spread over 9.30am to 6.00pm. It starts at 1500h and goes off at 15.25. It again starts at 1530h which does not exist in the programme. Next start is only at 1630. I have reset time, timer and tried all combinations. It did not help. Will the DAY setting or Manual, Auto, ON, OFF settings at the time of timer steup matter?
we got it fixed with the help of an electrician last week.suddenly it stopped working since yesterday.I followed your instructions,I was able to reset it,but the problem now is the led light isn't glowing,because of which it's not working.what do think is the problem??can you help?
hi, sir mera sawal ye hai ki, main agar koi light timer par set kar di hai , main village side main rahata hu agar light jatti hai aur light aane ke baad mujhe timer set karne ki zaroorat nahi hai na
Despite the attempted comeback, it still is a fact that the video though informative looks bad, mainly because of shooting vertical. You will get lesser resolution, a smaller frame and in a manner the eye isn't accustomed to viewing video or things in general. And there is intense camera judder to add to the melee.
Thanks for this tutorial. It was very useful in setting up the timer function. Appreciate the help.
ruclips.net/video/A9fuPfxlEG4/видео.html
Thanks for your video it's very useful
Thank You Kumaran...very helpful.
Thank you, this helped me a lot.
Thanks and really appreciate it👍
it very informative. thanks brother for that clear explanation.
Thanks. It was very helpful.
thank u, very good explanation
Hi Kumaran, Thanks for your informative video about the Timer. I was trying to turn on the 1.5hp submersible pump Auto ON... but I see that the Pump starter gets the power but the submersible pump doesn't power on. I need to manually press the Green Power on Starter. Do I need a Contactor to Auto start? Please let me know.
Thanks buddy it was really helpful
ruclips.net/video/A9fuPfxlEG4/видео.html
I have been using TM-619-series Timer for the last two years satisfactorily. Basically I am using this for my ceiling fan so that it will put on at about 1.30 night after the AC timer is off. But yesterday i.e. on 13.9.2017 night as usual I set the time for 1.30 am (14.9.17 morning). Of course the timer was on automatically but at about 4.00 in the morning my fan stopped though I did not set the timer off. When I checked it the red light which normally is bright, was very dim and as the time went by it went off. Despite best efforts, the timer is not working. On checking, the battery appears to be working, though it has completed more than 2 years. Therefore, I would like to know what could be the problem. Will it be alright if I put a new battery or there could be some other problem with the timer itself. An immediate reply would be much appreciated.
THANKFUL VIDEO
Hello, very informative video. I have also purchased one from ebay, but there is some confusion with the wiring part, my model is TM-619-2 can you please help? The input part is ok but the output part is a bit confusing, it doesnt say which pin is neutral or phase simple pin number and load is mentioned. in my case pin number 3 and 5 comes under load.
do you need to set it every week??
very helpful ,thanks
Thanks for the information
Sir
Very informative tutorial..Can I set timer continuously for five hours a day??
How do i connect the Frontier timer to the submersible pump in my aquaponics setup?
Thanks bro
Sir, u keep 1 hour rotational period for every two hour.. One hour rotation is good for the egg or what? What will happen if we set timer to rotate after every two for few minute?
hi, This is harshal, I want to know that, i am living at village site so we have light cut out problem, If i set the timer for any light their on time and that time main light gone after that their is no need to set all that time?
thank you
ruclips.net/video/A9fuPfxlEG4/видео.html
Dear Sir, I just bought this Timer and it works good as per your instructions, but when the timer is on (output is on), and then when there is a power outage, it does not flip back to on automatically. Ideally if I have set the timer-1 between 4:00pm to 5:00pm and if there is power outage at 4:30pm and then power comes back at 4:35pm, the output does not turn on (my application is a light). Kindly advise please. Thanks in advance for your help
Mr K even i had same problem if u found any solutions for timer
I have been using this timer for sometime now. However it started to function erratically. Can you please suggest what could have gone wrong. I have set up 8 ON time and 8 OFF times. Gap between each On and OFF time is 25 min. Each of the 8 ON timings are spread over 9.30am to 6.00pm. It starts at 1500h and goes off at 15.25. It again starts at 1530h which does not exist in the programme. Next start is only at 1630. I have reset time, timer and tried all combinations. It did not help. Will the DAY setting or Manual, Auto, ON, OFF settings at the time of timer steup matter?
Sir maine timer set kiya par light on nahi hota hai
Or jaha on likha hai vaha ka red led bhi on nahi hota hai
Please help kijiye
Is it possible to use in 1.5 HP mono-block water pump directly? To start daily, twice for 25 minutes farm irrigation for all day.
Thanks dear, I will order it by today.
thanks,
Thanks dear, I made it & its working from the last two months on daily basis automatically.
how long day and time settings will continue?
we got it fixed with the help of an electrician last week.suddenly it stopped working since yesterday.I followed your instructions,I was able to reset it,but the problem now is the led light isn't glowing,because of which it's not working.what do think is the problem??can you help?
Hi ,thank you for replying,the problem is the 1st one will get it repaired..👍👍
timer able to set 1hr off then 5 min on, 1hr off then 5 min on this rotation for 24*7 full day is it possible plz help me
how do you clear a time that has already been set so that no time is displayed?
Is it possible to do 30 mins on 30 mins off ?
Thanks Sir....
i tried to understand bt still it would help!
Thank-you
ruclips.net/video/A9fuPfxlEG4/видео.html
where can I order this one
Thanks A lot buddy
Thank you sir
I bought 5 timer when given suppy but no display showing how I rectify this problem. Timer TM619
hi, sir mera sawal ye hai ki, main agar koi light timer par set kar di hai , main village side main rahata hu agar light jatti hai aur light aane ke baad mujhe timer set karne ki zaroorat nahi hai na
Harshal Jathar There is a manual override
Dobara fir set karna hoga
please make a video on its wiring!
what is the maximum wattage it can handle?
i want to use this for water pump. But, there are times where there is no water. wht can i do to avoid running the pump dry
@@donaldfdes88 you can contact with us for safety of time and dry run pump
Hi! or it posible set timer 5min ON 15min OFF 5min ON 15min OFF?
ciclic timer works on 12v. i need 220v 3-5min on and 20-30min of.
could u know how to do it?
Hello sir, even after changing the battery cell the light is not working after powercut
thanks
Mine isn't starting automatically
Nice.forme
This timer works only for few days or few months and after that it does not work.
Very informative but the camera shaking all over the place gave me a headache!
Despite the attempted comeback, it still is a fact that the video though informative looks bad, mainly because of shooting vertical. You will get lesser resolution, a smaller frame and in a manner the eye isn't accustomed to viewing video or things in general. And there is intense camera judder to add to the melee.
Can u tell minimum on time
My timer is getting off when power cut occurs between on and off time,and not turning on again when power comes again,please help me
Kumaran Srinivasan just the output is not working but the light in the timer is getting on
Even the time and program remains correctly and getting on the next day properly on next on time
Kumaran Srinivasan please reply
Even after changing the battery the same problem exist,please tell me a solution for this
Sir please show wiring.
thanks