Radiolink R7FG Working Modes & Gyro Phase with RC6GS

Поделиться
HTML-код
  • Опубликовано: 24 ноя 2024

Комментарии • 42

  • @STEVOD313
    @STEVOD313 5 лет назад +1

    Looks good, new products always nice

  • @Tejaye777
    @Tejaye777 3 года назад

    I think this controller has really good value and I currently have it. I replaced my Futaba 4PV with this because the range on the Futaba 4PV was abysmal. The range and gyro on this are both incredible. This has more features than any sub $ 100 radio I know. The steering isn't as direct as my Flysky FS GT5 though, the Flysky just feels better and more direct and instant with respect to steering. I think that Radiolink/Dumbo rc is a brand that gives a lot value for the dollar but there is a bit of a tendency to have glitches to in my DUMBORC-X6 2.4Ghz 6 every now and then the car I was controlling would just max out it's speed (very dangerous) and the Radiolink RC6GS V2 2.4G 6 would have problems going into reverse and suddenly just go into reverse without any operator input. This however has the the most features of any radio I know of for less than $100, the furthest range of any radio I know and the strongest gyro I've ever had whether it be built in or external. The strength of the gyro on this is something that is often forgotten because the range is the biggest selling point. I've had Traxxsas TSM, Dumbo RC built in gyro, Flysky FS GT5 built in Gyro, Yokomo DP-302 V4, and Futaba GYC 441 and this is the strongest gyro I've ever used.

  • @RCVOODOO
    @RCVOODOO 5 лет назад +1

    got this receiver and it works great. super easy binding with the rc6gs

  • @rodk2891
    @rodk2891 3 года назад +1

    Thank on the info

  • @Vassilika1
    @Vassilika1 3 года назад

    Thanks, this helped me a lot!

  • @rcsnapon2132
    @rcsnapon2132 5 лет назад +1

    Awesome receiver video i also subscribed

  • @robertwilson-zx2dt
    @robertwilson-zx2dt 10 месяцев назад

    Hello can u place the receiver sideways in an arrma kraton 6s my compartment for it is smaller I was told to place it slightly upwards facing front

    • @Radiolink_official
      @Radiolink_official  10 месяцев назад

      Hi, sir. When installing the receiver, please place the receiver horizontally in the car. So if you want to place the receiver sideways in an arrma kraton, just make sure it is installed horizontally. All directions is okay. And the dimension of R7FG is 35*22*14 mm. So you can check if it matches the compartment . And here is a link to introduce how to install receiver antenna for your reference. www.radiolink.com/newsinfo/886600.html If any question about RadioLink products please feel free to contact us. Our email is: after_service@radiolink.com.cn

  • @DirtDobberRC
    @DirtDobberRC 8 месяцев назад

    I have 2 of these receivers one on y redcat and the other on my scx10. I have them both programmed to my rc6gs v3 transmitter. My redcat receiver light is green and the scx10 is blue. Shouldn’t both be green?

    • @Radiolink_official
      @Radiolink_official  8 месяцев назад

      Hi, sir. R7FG has 4 working modes. Different colors indicate different working modes. You need to check the version of your R7FG and check the corresponding manual to know about the working modes. Here is the link for you: www.radiolink.com/r7fg_manual If any question about RadioLink products please feel free to contact us. Our email is: after_service@radiolink.com.cn

  • @boraerdem2222
    @boraerdem2222 3 года назад

    How can i active ABS?
    İ am trying but nothing.

  • @toysforboysrc
    @toysforboysrc Год назад

    What do I do if I am already using all of my channels on my receiver? I am using channel 3 for LED lights. How do I adjust the sensitivity of the Gyro without affecting the lights?

    • @Radiolink_official
      @Radiolink_official  Год назад +1

      Hi, sir. If you want VR to control the light, you can adjust the gyro sensitivity in the menu- GYRO. you can
      adjust gyro sensitivity STD or VR. STD is adjusted on the setting page. and VR is
      default CH3. So you can set it to STD to adjust the sensitivity. If any question when using RadioLink products please feel free to contact us. Our email is: after_service@radiolink.com.cn

    • @toysforboysrc
      @toysforboysrc Год назад +1

      @@Radiolink_official …. THANK YOU 🙏🙏👏

    • @Radiolink_official
      @Radiolink_official  Год назад

      @@toysforboysrc Our pleasure.

  • @andresabrego269
    @andresabrego269 5 лет назад +1

    There are no links in the description (as you say in the video)

    • @Radiolink_official
      @Radiolink_official  5 лет назад

      Oups, sorry for the mistake. Here is the link of Brushed ESC CL9030 radiolink.com.cn/doce/product-detail-155.html
      And here is where you can buy it www.aliexpress.com/item/33057903012.html?spm=2114.12010615.8148356.17.68ac1d0aBw7FvM

  • @VAGtuner
    @VAGtuner 3 года назад

    Hello. Is this setup need just once after first connection?

  • @JimmyKay1976
    @JimmyKay1976 3 года назад

    I reversed the throttle but it doesn't work. The car goes reverse even if I set it to normal. Please help.

    • @Radiolink_official
      @Radiolink_official  3 года назад

      Hi, did you check your ESC setting? you could contact us by email: after_service@radiolink.com.cn
      we will reply you timely

  • @marcosavy3753
    @marcosavy3753 4 года назад

    Hi, I would like to ask for your help if it is possible: I have this radio model but (I don't know how) the "beep" of when the radio is turned on and the "beep" of the keys is gone Can you tell me how to restore the sound ?? P. S. I also tried to reset the radio and remove the batteries, without getting anything. Thanks a lot if you can help me !!

    • @Radiolink_official
      @Radiolink_official  4 года назад +1

      Hi This is strange because the sound can't be disactivated. Could you please send a video to after_service@radiolink.com.cn so that we can check a bit? Thanks!

    • @marcosavy3753
      @marcosavy3753 4 года назад

      @@Radiolink_official grazie, ho contattato la vostra assistenza e sto cercando di risolvere il problema. Grazie mille ancora!

    • @REPORODGE
      @REPORODGE Год назад

      @@Radiolink_officialdid you see that video?

    • @Radiolink_official
      @Radiolink_official  Год назад

      @@REPORODGE Hi, sir. The user may have already contacted our after-sales and solved the problem. May I know if there is any problem when you use our products? If yes, please feel free to contact us. Our email is: after_service@radiolink.com.cn

  • @msrcracing8387
    @msrcracing8387 4 года назад

    Can I use a brushless motor and ESC with this ? I cant get mine to work, My brushed motor and ESC work fine.

    • @Radiolink_official
      @Radiolink_official  4 года назад

      Yes. RC6GS and R7FG can be used with brushless motor and ESC.

    • @msrcracing8387
      @msrcracing8387 4 года назад +1

      @@Radiolink_official yes I had some Factory some presets settings in my castle ECS that I had to return to defaults then it worked. I love this Transmitter and receiver combo. Even though you guys sent me the wrong receiver for an RC car, ITs the RC7 with 2 antennas, One I ran along the frame and one in the antenna holder plastic thing. Reception is goof if not better anyways so no big deal. I love you can see battery voltage on the remote and battery voltage of the transmitter as well as the signal quality. Important if your flying but im not thus us fir a RC crawler. If I need another ill definitely buy again fort this price!

    • @Radiolink_official
      @Radiolink_official  4 года назад +1

      @@msrcracing8387 Thank you very much for your feedback and we are glad that you like it ! The dual-antenna receiver R7FG is the upgraded pack with RC6GS and its range is longer than R6FG. We hope more RC fans can experience our new product ;-)

    • @ShadeTree_RC
      @ShadeTree_RC 4 года назад

      @@msrcracing8387 what settings did you have to adjust ?

    • @msrcracing8387
      @msrcracing8387 4 года назад +1

      Chuck Hall use the flask link and set my castle to defaults

  • @rclife9725
    @rclife9725 3 года назад

    Why am I losing reception so fast

    • @Radiolink_official
      @Radiolink_official  2 года назад

      Hello, sir. Could you please test RSSI first? Here is the guidance: www.radiolink.com/newsinfo/561239.html

  • @RCVOODOO
    @RCVOODOO 5 лет назад

    link to the receiver www.amazon.com/Radiolink-Receiver-Two-Way-Transmission-Real-time/dp/B07RWC9GXT?ref_=ast_bbp_dp