Это видео недоступно.
Сожалеем об этом.
How to do Ringlock Scaffolding/ Falsework at Site (Function & Advantages)
HTML-код
- Опубликовано: 8 ноя 2019
- The Ringlock scaffolding system is one of the types of modular scaffolding . It enables workers to set up, use, and disassemble a temporary work structure with speed and efficiency, therefore saving on time and labor cost. Ringlock is one of the most sophisticated and complete scaffolding systems on the market. It has been designed to keep components minimal to allow for simple set up and dismantle. A single rosette sits at the core of all components. With a built-in safety mechanism and high load capacity, the ringlock scaffolding system is a popular choice in many different kinds of applications.
------------------------------------------------------------------------------------------------------------
#Falsework #Scaffolding #Dhaka metro rail
Setting up ringlock scaffolding involves several key steps to ensure safety and efficiency. Here's a step-by-step guide to help you through the process:
Materials and Tools Needed:
- Ringlock standards (verticals)
- Ringlock ledgers (horizontals)
- Ringlock diagonal braces
- Base jacks or base plates
- Scaffold planks or decks
- Safety equipment (helmets, harnesses, gloves, etc.)
- Level
- Hammer or mallet
- Measuring tape
Steps to Assemble Ringlock Scaffolding:
1. *Site Preparation:*
- Clear the area of debris and ensure the ground is level.
- Lay out the base jacks or base plates where the standards will be placed.
2. *Setting Up Base Jacks:*
- Place the base jacks on the prepared ground at appropriate intervals according to the scaffold design and load requirements.
- Adjust the base jacks to ensure they are level.
3. *Installing Standards (Verticals):*
- Insert the bottom of the standards onto the base jacks.
- Ensure the standards are plumb (vertically aligned) using a level.
4. *Attaching Ledgers (Horizontals):*
- Attach the first set of ledgers at the base of the standards to form the scaffold’s base frame.
- Secure the ledgers to the rosettes on the standards using the wedge-lock system.
- Continue adding ledgers at the required heights, forming horizontal platforms.
5. *Installing Diagonal Braces:*
- Attach diagonal braces to the standards to provide lateral stability.
- Ensure they are properly secured to the rosettes on the standards.
6. *Building Up the Scaffold:*
- Continue adding standards and ledgers, working your way up to the desired height.
- Install additional diagonal braces as needed for stability.
- Ensure all connections are secure at each level.
7. *Installing Planks or Decks:*
- Place scaffold planks or decks on the ledgers to form working platforms.
- Secure the planks to prevent movement.
8. *Safety Measures:*
- Install guardrails on all open sides of the scaffold at each working level.
- Ensure access points (ladders or stairways) are secure and in place.
- Inspect the scaffold regularly to ensure all components are securely fastened.
9. *Final Checks:*
- Perform a thorough inspection to ensure the scaffold is stable and all components are properly secured.
- Ensure the scaffold meets all local safety regulations and standards.
Safety Tips:
- Always wear appropriate personal protective equipment (PPE).
- Follow the manufacturer’s guidelines and local safety regulations.
- Ensure all workers are trained in scaffold assembly and safety procedures.
- Do not exceed the scaffold’s load capacity.
- Regularly inspect the scaffold for any signs of wear or damage.
By following these steps, you can safely and effectively set up ringlock scaffolding for various construction and maintenance tasks.
THANKS FOR YOUR UPLOAD
Base collar is upside down
ভালো হয়েছে ভাই কাজ শিখা যায় ভিডিওটা দেখে
Learn and do properly
Ok
Practice makes perfect.
ইসকা ফোল্ডিং এর আরো অনেক ভিডিও চাই।
pocher upside down???
ধন্যবাদ ভাই
অনেক সুন্দর
The first props after jack base has been wrongly installed. 😊
Do you produce this form works and scaffolding system in bangladesh or you just provide service? Thanks in Advance.
No. You can collect from china. Ringlock scaffolding.
We can Produce this Ring lock scaffold.
We produced. Send your contact
عمل جيد
ফাইন ভিডিও ভালো লাগলো কাজ শিখার নতুন পদ্ধতি সাবস্ক্রাইব করি সবাই তাহলে কাজ শিখতে পারবেন
Yes.
👌👌👌👌
BROTHER CAN WE PUT THE STANDARD INSIDE THE BASE JACK WITHOUT USING THE COLLAR AT THE BASE?
Yes
Yes, it depends on your height requirement.
nice
Thank you
এই কাজ কি খুবই রিক্স
Bro, is it in Bangladesh or Kolkata?
Bangladesh
Bangladesh
Do you need? Send you're contact
আসসালামু আলাইকুম ভাই। প্রতিটা যন্ত্রপাতির নাম আলাদা ভাবে বলে একটি ভিডিও দেন। এটা কি ভাবে ছোট বড় করা হয়। মানে সব জায়গায় তো আর এক মাপের রিং লক প্রয়োজন পরে না
It depends on types of scaffolding. It may slightly differ by manufacturers. In general verticals starts from 200mm to 3600mm for system supporting and 300mm to 3800mm for system scaffolding and horizontals starts from 300mm to 1800mm approximately. Jack base and u-heads are almost all same 600mm but thickness can be differ. System scaffolding in general includes flooring but system supports in general are not. This video actually is about system supports rather than system scaffolding use which includes theoretically flooring section.
Kajer mojori kemon