How to reset the error code replace developer unit on Xerox SC2022 copier

Today we come to share a valuable piece of information!
Xerox SC2022 copier prompts
How to reset the error code for "replace developer unit" ?
If the copier can operate normally and have good printing and copying effect.
So simply "clearing the error code" would solve the problem.
If the machine's printing and copying results are poor, it is necessary to adjust it based on actual conditions.
Replace the new developing unit and then clear the "error message".
Below we have instructions for using the Xerox SC2022 copier
"Replace the developing component" using "C" as an example, clear out the incorrect information.
In the shutdown state, long press the "home" key.
Press the power button and do not release the "home" key.
Press "SPECIAL" button, then press "MENU" button and finally press "home" button.
Please enter the password "6789#" to access the "CE MODE MENU" interface.
Click "CE Diag" and enter the CE judgment mode
"Select 'printer diag' and click OK"
Click the down arrow and select "parameter" then click OK.
Select "Life" and click OK
Click the down arrow again and select "Deve HSG PV C", then click OK.
Click the downward arrow, then select "Initialized" and click OK.
After the machine has finished restoring, there is no sound, please restart the copier.
After the machine has booted up, it will be found that the error message has been cleared.
The machine displays a "ready" status and no longer prompts "replace developer unit C".
For copier-related issues, contact Jinyinda.
Welcome to leave a message in the comments section
We will actively help you to solve it!
For more information about chip installation issues, visit：WWW.jydchips.com
1. Chip installation demonstration guide
2. Chip version selection guide
3. Analysis of chip common problems
4. Analysis of chip consumables page
More information, welcome to visit our website and contact us!

[@rodneyreynolds7705]

'Promo sm' 🤘