I wish you were my jw. Your explanations were simple and easy to understand. It's apparent you love being an electrician. I just subscribed and look forward to future videos.
Hey LT, thanks a ton. I do freaking love being an electrician. Don't let anyone slow you down or make you dislike the trade. I learned a ton from a lot of JW.. some good and some really bad.
I agree with you 100% about how some electrician will tear anotherperson work down just to make themselves look good. Unfortunately, I have worked around too many of them in the field. And whats worse is these are "union" guys I'm talking about. But I know now there's no real union in Florida. Anyway, l agree with what you said around 11:56 min of your video.
Tony, thanks a ton for the support. "Darkness can not drive out darkness... only light can do that". MLK, if still around might be right there beside us making up a panel. Let's do everything we can to build each other up
Excellent video. New subscriber here. Looking forward to new videos. Don’t really care how you address you viewer base. It doesn’t get my panties twisted. Keep of them good work thank you
Thanks a ton! Working on a saddle video, it’s freaking hard to communicate. FYI I’m not one to let “others” control what I say or think but I really do wanna see more women enter the trades. We are better where we are diverse in thought and perspective❤️🔥
Bro you are cool af 😂 I wish I could work with you I needed a lil refresher and you got me smiling and learning I bet your a cool Boss keep up the great work 👍😂
doing a lot of steel conduit work at this building site im on currently, never done anything to do with conduit prior this job so im learning what i can.. them benders you are using. does it work with steel conduit or is it aluminium only?
We have the 30 degree, which should be used the majority of the time. A 60…. TBH I’ve maybe down this 10 times in 10 years. They are a B word to pull through 😂
Good day idol,, iam abraham from philippines.. My questions is what is the exactly distance for the offsetting of 4" imc pipes using a manual hydrolic pipe bender?? I hope u see this massages? God bless
if you add 3/16" for every "Inch" you are offsetting you can calculate the shrink with no waste... but at the beginning just give yourself a little extra room and cut it to fit.
/ / / never saw you measure between the studs. . . how do i know what you are measuring from what to what. . . the hole in the box to the centerline of the stud. . the centerline of stud to stud. . . . .you feel everyone is inside your head/ / / / / / /
Be veeeeeery careful if decide to make things "look" level or square. It will look like sh*t when you're done. You would NEVER build an unsquare or unlevel addition to match the existing old structure. Yes it does expose what's wrong with the existing structure, but if match bad with bad it will look even worse. Try it and find out.
Mark over the existing mark "hard" with sharpie and immediately wipe it... somehow the new mark makes the old mark wet enough to erase... it's weird but works
Always do the math... but TBH doing math and talking and explaining and trying to remember if my zipper was down will make me prone to make mistakes. Crush 2023 my dude.
excellent presentations. i have a question: do you ever address the female electrician like me or all we all guys and fellas. the content here is amazing, the delivery needs tweaking to include all us gals and ladies. easy: y'all, everybody and everyone are inclusive enough.
Maggie, amazing point. Like most people when I say, "whats up guys..." I mean all people but your point is 10000% correct and thanks for bringing it up. For real, I super appreciate it. TBH I used to say "Chicks" like I would say "Dude" but my wife yelled at me ;) Future recorded videos will be better.
I agree. Kept talking in circles without getting to the point. Then, all the leg humpers (self-esteem coaches) chimed in to let him know everything was OK. Amazing how many RUclipsrs make the same mistake.
I wish you were my jw. Your explanations were simple and easy to understand. It's apparent you love being an electrician. I just subscribed and look forward to future videos.
Hey LT, thanks a ton. I do freaking love being an electrician. Don't let anyone slow you down or make you dislike the trade. I learned a ton from a lot of JW.. some good and some really bad.
Your attitude and professionalism is refreshing! thank you!
Be careful 😂🤦🏻♂️ the more I talk the more my tongue will slip and I’m bound to say something stupid 😂😂😂 thanks for the encouragement ❤️
Thanks a million brother! Very simple and fun way of delivering a hands on tutorial content. 🙏
Very professional. Exactly the way I work and think. 👍
I'm sure glad my journeyman taught me how to bend offsets that took all the math out of it, no multipliers no math.
Excellent job. Excellent video presentation
Bravo. Professionalism at its best. Great job.
I’m in los Angeles and I recently started going to Uei college to get certified as an electrician and this is some great content the watch
Gosh dang that is extremely kind… we are really gonna go hard and heavy first of the year ❤️❤️❤️
BOOM!! Haha AMAZING content bro thank you this video helped a lot. Current student in electrical
So cool dude remembered when I started learning 😎 👍 thanks for sharing 😊
Great explanation. Keep making your videos straight to the point 👌👌
I agree with you 100% about how some electrician will tear anotherperson work down just to make themselves look good. Unfortunately, I have worked around too many of them in the field. And whats worse is these are "union" guys I'm talking about. But I know now there's no real union in Florida. Anyway, l agree with what you said around 11:56 min of your video.
Tony, thanks a ton for the support. "Darkness can not drive out darkness... only light can do that". MLK, if still around might be right there beside us making up a panel. Let's do everything we can to build each other up
But around 9:50 you start bashing people down because they bend pipe on the floor. Let's not be hypocritical. But otherwise great video.
Bro I subscribed just because of the JE ft Nelly reference. Love from kcmo local 124
One of the greatest debates is, “Country Grammer or Ride With Me or E.I.”??? It’s so hard to order them ❤❤❤
I’m glad I found this channel 👍🏾
Excellent video. New subscriber here. Looking forward to new videos. Don’t really care how you address you viewer base. It doesn’t get my panties twisted. Keep of them good work thank you
Thanks a ton! Working on a saddle video, it’s freaking hard to communicate. FYI I’m not one to let “others” control what I say or think but I really do wanna see more women enter the trades. We are better where we are diverse in thought and perspective❤️🔥
Bro you are cool af 😂 I wish I could work with you I needed a lil refresher and you got me smiling and learning I bet your a cool Boss keep up the great work 👍😂
Great video. I was thinking I would do as single 90 that shot out the side of the box.
Hold up! The intro music had me hype 😂🙌🏾
Great job on explaining!!!
Pretty good brother appreciate the video
New suscriber, this channel is awesome!! Keep up with the videos :D
Coming in hot this new year❤
Do you work out? You look jacked. whatever you're doing, keep it up!
You explain things good.
Awesome vid man very informative 💪
Your the Master Dude great video
Thanks, I learned a lot
Glad it was helpful!
Hi, I like your video. Thanks
great presentation
Much appreciated my friend…. Where the heck did you find that emoji?
Appreciate the schooling…
Video is cool but chill wit the background music 😂
It’s overwhelming 😅
doing a lot of steel conduit work at this building site im on currently, never done anything to do with conduit prior this job so im learning what i can.. them benders you are using. does it work with steel conduit or is it aluminium only?
What is the measurements gap of overhead parallel pipes with different bends thank you brother in advance
And how about for the offsetting of 2" emt pipes? Thanks,
9 wire pretty sure you need wire size . can you put 9 THHN 6 AWG in 1/2 conduit?
Can you do a video where you bend a compound offset. Like a 60 and a 30 degree bend.
We have the 30 degree, which should be used the majority of the time. A 60…. TBH I’ve maybe down this 10 times in 10 years. They are a B word to pull through 😂
Good day idol,, iam abraham from philippines.. My questions is what is the exactly distance for the offsetting of 4" imc pipes using a manual hydrolic pipe bender?? I hope u see this massages? God bless
How would you account for shrink? I'm a beginner.
if you add 3/16" for every "Inch" you are offsetting you can calculate the shrink with no waste... but at the beginning just give yourself a little extra room and cut it to fit.
This time you did put you mark on notch (as in 3 point saddle) for 45 degree angle , pls explain thanks
Why did you take off 2 inches when measuring for the box I got lost there ?
Do you always start from the center of the connector?
Why didn’t u bend a small box off set on the top of that j box
lol good catch 😂
What was it a mini, looks like the same thing as a cd clip
CD Clips are what hold a bunch of CD’s in old cars… a.co/d/8PJ1XV4
/ / / never saw you measure between the studs. . . how do i know what you are measuring from what to what. . .
the hole in the box to the centerline of the stud. .
the centerline of stud to stud. . . . .you feel everyone is inside your head/ / / /
/
/
/
Awsome
💯🔥
Hey, don’t forget us elevator guys
U should start a school for real and what kind of tool belt u got on
Be veeeeeery careful if decide to make things "look" level or square. It will look like sh*t when you're done. You would NEVER build an unsquare or unlevel addition to match the existing old structure.
Yes it does expose what's wrong with the existing structure, but if match bad with bad it will look even worse. Try it and find out.
. . i cuss. . . youre not alone. . . .
/
/
/
How do you erase sharpie?
Mark over the existing mark "hard" with sharpie and immediately wipe it... somehow the new mark makes the old mark wet enough to erase... it's weird but works
Count shrinkage
Man you took forever to do one bend
I know right... I'll do better next time. Thanks for sharing your thoughts.
I had to stop. I hated the repetitive music bed. Silence is golden when it comes to concentration.
Just mute it...
Oh wait... nevermind... lol
I did the math and I didn't get =boom.
Always do the math... but TBH doing math and talking and explaining and trying to remember if my zipper was down will make me prone to make mistakes. Crush 2023 my dude.
good video though. . .
/
/
/
excellent presentations. i have a question: do you ever address the female electrician like me or all we all guys and fellas. the content here is amazing, the delivery needs tweaking to include all us gals and ladies. easy: y'all, everybody and everyone are inclusive enough.
Maggie, amazing point. Like most people when I say, "whats up guys..." I mean all people but your point is 10000% correct and thanks for bringing it up. For real, I super appreciate it. TBH I used to say "Chicks" like I would say "Dude" but my wife yelled at me ;) Future recorded videos will be better.
@@empoweredkcdudes and dudettes
Grow up😂
When people say journeyman/journey women or journeyperson I it makes me want to puke and I fire that person
. . . font stop cussing on my account / /
/
/
/
Talk to much get to the point got to keep forwarding
Skip the extra commentary and just show us how to do it. It shouldn't take more than 3 minutes.
Hey Richard, skip this channel and follow someone else.
I made it halfway though your 17:30 minute video with skips. No one cares about what boots you have on. Just get on with it.
False... many people care, especially those at bruntworkwear.com.
I agree. Kept talking in circles without getting to the point. Then, all the leg humpers (self-esteem coaches) chimed in to let him know everything was OK. Amazing how many RUclipsrs make the same mistake.