Very impressive you have mad skills. Thank you so much for paving the way for anyone that has the interest in this awesome hobby/sport. Very nice I love the 2 different schemes.❤️😎
Everything is just great, except gloss vinyl. Matte vinyl would be much better. Also, fixed landing gears spoils so good construction. Anyway, great job 👍
Man you had me glued to this article from the first couple of seconds. You should be very proud of your plane. It is nothing short of a master piece. Looks just like you bought it pre made from a big name company. Well done my friend....I don't know if I could bring myself to fly it.... I'd be devastated if I crashed it. Look forward to the next one... if there is a next one???😉
I can’t believe that you build the greatest foam formed F-16 and use those crappy servos! If you were me I’d switch them to some Futaba mini servos. It’s awesome that your running 12 blade turbine fans. I hope your using at least 100 or 120 amp castle creation speed control and 6 or 8S battery. Are those blue bird servos!? I used them when I built the MS Hornet 2 back in 02 which I was the 1st to incorporate CCPM into the 1st grey framed Align T-Rex 400 which they copied my design and built the T-Rex 450 which I stretched mine to 450 and there 1st grey framed clone to a Raptor 50 with one servo for collective! It’s all up RTF was between 800/900 grams and I didn’t use the front end and incorporated CCPM and went with a Gold series T-Rex 450 brushless engine and a gold Heat Sink and 35 amp castle creation speed control which come out at 520 grams with a Futaba 401 gyro and a 13 channel reciver board that only weighed 9 grams and I binded it to my 9Z world championships radio. Which is one of the reasons that SpaceX named the Falcon 9 after me. It took the rover and helicopter to Mars on my birthday 5/30/21 and I dominated motocross within 9 months in 1999 and unfortunately shattered both my legs on 1/20/01. Which is why I got into flying rc helicopters being I was stuck in a wheelchair for all of 01. But I became a legend in rc helicopters and imma legend in Motocross and Freestyle Motocross. I come back and beat Ryan Dungey professional Factory Suzuki #1 racer in which he blew his 50,000$ Pro Circuit RMZ 450 engine while I was on my 07 KTM 250 SX 2 stroke which he was on a 4 stroke and I smoked him within 5 laps in loronger Louisiana in 2007. ❤️🎱🛫🚁🏁😎
Sir. I reading most of people like you r videos and like your videos and thay are request you But your Response every time and every videos NAGTIVELY I REALLY HEART YOUR COMENTS .. 2ND THING YOU ARE FIRST PERSON IN RUclips PLATFORM TAKE NAGETIV RESPONSE FOR EVERY PERSON . WAHEED FROM PAKISTAN
Sorry I'm not good at English, I can answer each question slowly, and some I don't open it every day, and some people ask me in their own language, but I don't understand, and I don't know what language it is, so I don't reply.
I can`t complete watching your video because you don`t have a diagram for your design. Hence viewers can not replicate your work. Please attach a diagram to your build for the shapes to cut and circuit diagram of your wiring.
@@gameflyingrc dear just take the pictures of all the parts you draw and make pdf and share for all and just mention the scale size that's it, if you can do that for us it's really appreciated 👍
COMO TE PUEDO COMPRAR UNO SOY DE COLOMBIA COMO NOS PODEMOS CONTATAR dangsin-eul wihae hanaleul eotteohge sal su issseubnikka? jeoneun kollombia chulsin-ibnida. eotteohge yeonlaghal su issseubnikka? 당신을 위해 하나를 어떻게 살 수 있습니까? 저는 콜롬비아 출신입니다. 어떻게 연락할 수 있습니까?
Very impressive you have mad skills. Thank you so much for paving the way for anyone that has the interest in this awesome hobby/sport. Very nice I love the 2 different schemes.❤️😎
You r doing a really great job…..
Everything is just great, except gloss vinyl. Matte vinyl would be much better. Also, fixed landing gears spoils so good construction. Anyway, great job 👍
Man you had me glued to this article from the first couple of seconds. You should be very proud of your plane. It is nothing short of a master piece. Looks just like you bought it pre made from a big name company. Well done my friend....I don't know if I could bring myself to fly it.... I'd be devastated if I crashed it.
Look forward to the next one... if there is a next one???😉
Great job, i enjoy it from start to finish. Sharing your plans would be nice. Again great job 🇧🇧
Well done bro. I'll be waiting for you to build SOLOTURK
Incredible craftsmanship
I can’t believe that you build the greatest foam formed F-16 and use those crappy servos! If you were me I’d switch them to some Futaba mini servos. It’s awesome that your running 12 blade turbine fans. I hope your using at least 100 or 120 amp castle creation speed control and 6 or 8S battery. Are those blue bird servos!? I used them when I built the MS Hornet 2 back in 02 which I was the 1st to incorporate CCPM into the 1st grey framed Align T-Rex 400 which they copied my design and built the T-Rex 450 which I stretched mine to 450 and there 1st grey framed clone to a Raptor 50 with one servo for collective! It’s all up RTF was between 800/900 grams and I didn’t use the front end and incorporated CCPM and went with a Gold series T-Rex 450 brushless engine and a gold Heat Sink and 35 amp castle creation speed control which come out at 520 grams with a Futaba 401 gyro and a 13 channel reciver board that only weighed 9 grams and I binded it to my 9Z world championships radio. Which is one of the reasons that SpaceX named the Falcon 9 after me. It took the rover and helicopter to Mars on my birthday 5/30/21 and I dominated motocross within 9 months in 1999 and unfortunately shattered both my legs on 1/20/01. Which is why I got into flying rc helicopters being I was stuck in a wheelchair for all of 01. But I became a legend in rc helicopters and imma legend in Motocross and Freestyle Motocross. I come back and beat Ryan Dungey professional Factory Suzuki #1 racer in which he blew his 50,000$ Pro Circuit RMZ 450 engine while I was on my 07 KTM 250 SX 2 stroke which he was on a 4 stroke and I smoked him within 5 laps in loronger Louisiana in 2007. ❤️🎱🛫🚁🏁😎
....เครื่องบินบังคับ.....สร้างยาก......พังเร็ว........ออกเดท ..take ออฟ เป็น.ลำ....ลำดิ่งพัธสุทธา.โหม่งโลก..........ขากลับบ้าน...ทั้งลำใส่ถุง..ปุ๋ย......จากประสบการณ์..เคยมาแล้ว...ว่าไป..
พี่บินไม่เป็นละมั่ง??…..555
ใช่คับ ตอนเป็นมือใหม่จะสะดุ้ง แล้วเล่นไปสักพักเข้าใจว่าตัวเองเก่งแล้วกดตันเร่งหมดแม็ค ผมให้พินาศ 5555
สิ่งที่ ยากกว่า การบินคือ ทำลำให้ตรง เปะ
The best and comprehensive rc making vedio precise and perfect
Thank you
Looks goddamn awesome ! Can I ask you what type of polystyrene and what type of covering material do you used ?
Well done buddy. You did a good job.where you belong from ?
Very great work!! What materil do you use for covering Wing?
Very nice.
You didn't share a flying video.
Sir.
I reading most of people like you r videos and like your videos and thay are request you But your Response every time and every videos NAGTIVELY I REALLY HEART YOUR COMENTS ..
2ND THING YOU ARE FIRST PERSON IN RUclips PLATFORM TAKE NAGETIV RESPONSE FOR EVERY PERSON .
WAHEED FROM PAKISTAN
Sorry I'm not good at English, I can answer each question slowly, and some I don't open it every day, and some people ask me in their own language, but I don't understand, and I don't know what language it is, so I don't reply.
@@gameflyingrc hi.
sir i need jest my hart favret f-16 aircraft DRAWING PATREN ,
Other people would need an armada of laser cutters and CNC tools ...and this guy does it better by handcraft.
สอนทำเเบบหน่อยครับคืองงดูภาพ3viewไม่รู้จะเริ่มยังไงง
Good work, how much is the weight without battery?
about 2.5 kg.
@@gameflyingrc thanks for the quick answer! :)
Perfect , wonderful and well-done.
thank you
Very good...can I get the plan as pdf????
Harikasın be güzel insan ne şaheser çok güzel el işçiliği
Ben aldım 2ay süre istediler 2ay sonra gönderecekler çok güzel
How much to pay for an f16. Great work
Felicitaciones desde ARGENTINA 👍
F16 แบบนี้สั่งทำจะกี่บาทครับ
ลำตัวเปล่าๆ 5200
ติดต่อได้ทางไหนครับ
What do use for cover ? Can you send the link of the foil?
Very good job can i get the plan as pdf
Very very nice! Thanks!
Sensacional! Pensei que veria ele voando no final do video rs.
massa né
Brother what materials & qty used for making such a model....
please revert...
ทำแบบติด dtac ไฟฟ้าราคาเท่าไหร่ครับ
ต้องหามาเองครับ ติดให้ได้ แต่ราคาก็ประมาน สี่พันกว่าๆ แค่รีแทคนะ ของ F16 แพงมาก ส่วนลำตัวผมทำในราคา 5 พัน
@@gameflyingrc how practical will it be in the sky? And if in dollars, how much will it cost? can you ship to Poland?
What is the Plastic Thing @ 11.14 that you are using for the tail control called and where can you buy that from?
some plan, dimensions, information, please.
Vai disponibilizar a planta ?
no have PDF file
Excelent
Gostei, quentão custaria o preço do kit( só a parte da espuma cortada enviando para o Brasil.
Como puedo tener uno? Y cuanto me costaría soy de México saludos es genial es uno de mis aviones favoritos
I can`t complete watching your video because you don`t have a diagram for your design. Hence viewers can not replicate your work. Please attach a diagram to your build for the shapes to cut and circuit diagram of your wiring.
Como puedo conseguir los planos para hacer un F 16 como el que usted hizo o usted lo vende el avión para armarlo
Amazing!!!!
ตัวนี้ ไม่มีรีแทคใช่ปะครับ
ล้อธรรมดาครับ
f16 ราคาเท่าไหร่ครับ
ลำตัวเปล่า 5พันครับ
@@gameflyingrc how much ready to fly? Thank you
@@gameflyingrc and 5 thousand what divisa?
Temos c9mo comprar um destes ?
Ou mande a planta do modo por favor
ติดต่อทางไหนครับ
ตอนนี้งดรับงานสร้างอยู่ครับ เวลาน้อยครับ
facebook.com/gameflying.rc?mibextid=ZbWKwL
ดูผลงานเพิ่มเติมทาง Facebook หรือสอบถามทาง แชทได้ครับ
ขอซื้อแบบกระดาษหน่อ่ยครับ
ซื้อได้ครับแต่ราคา 1,200 บาทถ้าตกลงก็ LINE มาที่ 083-5990133 ครับ
Planss plz be attached
CAN you make à rafale ?
I can do it, but that gives me a chance to have time to do it first.
@@gameflyingrc please make tweety bird T37 Pakistan aircraft
ตกลำเท่าไร่ครับลำเปล่า
ห้าพันครับ
@@gameflyingrc ตอนนี่ยังทำอยู่ไม่ครับรายละเอียดดีมากเลยพร้อมบินแบตสองก้อน วิทยุไม่เอาอยู่ที่หมืนเท่าไร่
@@gameflyingrc ผมเล่น117-su30 ไม่ใช่ดั๊กแฟนคิดว่ายังยากอยู่ไม่ผมไม่เคยเล่นดั๊กแฟนครับ
Watch Julius Perdana videos with full and Free Plan
Not show to fly. May be for show not for fly.
I only do the fuselage part and send it to my clients, I'm the one who makes the plane, sells flight video clips, maybe not every one of them.
Plane PDF file?
I don't have a PDF because I only draw it on cardboard for cutting.
@@gameflyingrc can you combine it and share for us?
@@gameflyingrc dear just take the pictures of all the parts you draw and make pdf and share for all and just mention the scale size that's it, if you can do that for us it's really appreciated 👍
@@IronMan-uz2cr It's right
how much? thb
body only 5500 thb.
Зроби і мені такий
COMO TE PUEDO COMPRAR UNO SOY DE COLOMBIA COMO NOS PODEMOS CONTATAR dangsin-eul wihae hanaleul eotteohge sal su issseubnikka? jeoneun kollombia chulsin-ibnida. eotteohge yeonlaghal su issseubnikka?
당신을 위해 하나를 어떻게 살 수 있습니까? 저는 콜롬비아 출신입니다. 어떻게 연락할 수 있습니까?
ผมสนใจเทรนเนอร์ที่เป็นดักแฟนครับยังมีไหมครับเฉพาะตัวลำเท่าไรครับ
ตอนนี้ยังไม่มีครับผม ติดลูกค้าด้วยช่วงนี้
ลำเท่าไหร่ครับพี
ลำตัวเปล่าๆ 5.2 พัน ครับ ถ้ารวมขุดไฟก็จะประมาน 1.3 หมื่นได้ครับ