*I DIDN'T USE PARCHMENT OR WAX PAPER ON PURPOSE* Paper was chosen specifically BECAUSE the small pieces would stick to it during assembly, making the process much easier. Having the pieces slide around on parchment or glass or wax paper or whatever would be very annoying and make the process way more difficult. This is *especially* true if someone were using a slower drying glue like PVA. Assembly on parchment is great in many situations and I've done it many times in other videos, but it was not right for this. What elements are you struggling to find or afford that you would like to see how to hand craft? Let me know and I'll see if I can sort it out. This video was not sponsored by Shifting Lands by the way... The stained glass sheets I briefly show are a product being launched along with this kickstarter: kck.st/2M7Hx2L GEL SHEETS I USED (USA) amzn.to/2UO8VIV (Canada) amzn.to/3bKzyEO (UK) amzn.to/38tzLde (Germany) amzn.to/38soHNB (As an Amazon Associate I earn from qualifying purchases) Video where I make the little tavern diorama: ruclips.net/video/8bQHYCHZmjg/видео.html
I posted the comment two weeks ago and just made the video public today...Videos don’t get uploaded and immediately go live. Videos are produced and uploaded weeks in advance.
Hey man I am looking at this and looking at the paper and seeing the problems. I have a question... why not use baking tray paper? its non-stick everything will jump off it no problems.
James Colman the whole point of the paper is that you want something to stick to when assembling the frame. You don’t want it sliding all over the place.
Last week: We are making an Eldritch horror, a reviled Goliath which shall taint the land in a shroud of darkness and insanity. This week: Windows are nice, you can put them in a cute lil’ cottage :) BMC has all my needs covered.
As an RC plane builder I have a really good tip on how stop your windows from sticking to the paper. Use waxed paper. The work will readily come off of it. You can find it at your grocery store. Put the waxed side up. Easy way to tell the waxed side is to rest your razor and slide it sideways. The wax will build up on the blade. That is the waxed side which is the side you want up to work on.
Yea, I build stuff on parchment paper all the time for this reason. In this case though I intentionally didn't. The adhesion to the paper was an intentional property I wanted to utilize in this. Building tiny fiddly frames, it helps to have them stay in place. Especially if someone were to use a slower drying glue and were making a bunch.
You're the man Jeremy! This past year I've been getting back into hobby after a 10 year hiatus, and you and a few other favorite crafting youtubers have absolutely super charged my efforts and techniques.
The timing of this video for me is like when facebook ads show up advertising things you've been looking for/have thought about. This is super useful and will save me so much money so thank you!
*Jeremy* Making small incidentals like this is just the type of video I enjoy - it's useful information and helps a load when you can't afford to get pre made stuff from all over the world via the internet. Please make more videos like this one. Perhaps you could show how to make any of the following : 1. Hinges - both working and for show, not only in metal, but also in clay, or rigid plastic. 2. Various types of roof tiles made in different materials such as clay, card, paper, plastic, foil, metal. Roof tiles such as grey Welsh slate, Italian terracotta, Chinese shingles, Flemish thatch, American Cedar shingles etc. 3. Make a mold so you can then make batches of roof tiles. Either individual tiles or a complete interlocked roofing sheet of tiles that you can later cut to size, and also be able to make it in plastic, plaster or clay. 4. Doors, doorways & door stoops, and all the associated accessories such as : various types of door handles doorframes doorsteps porch lights letterboxes door gargoyles windows in doors door porches door rain covers various types of hinges big double Church doors opening square hatches (to see who is on the outside - think 1960's films with a hidden underground drinking den, where the bouncer would open a small square hatch to see who wanted in, which he then shuts, and opens the big door fully to let them in). 5. Make a stencil in metal preferably, or rigid plastic, for brickwork, so you can put the stencil down on a piece of foam or thick mounting card, secure the stencil, cover the board and stencil with plaster, let it dry a little, remove the stencil, which then leaves a brickwork pattern to dry, which can then be painted, and you have a ready-made brick and indented mortar on a wall, which can account for curves, or be totally straight. 5. How to make a jig. Not everyone can understand how to make a jig (such as my young nephew who didn't know what you meant when you said to "make a jig to do this"). Explain how to work out what you need, and how to then go about making a jig. This would be useful for people who are not exactly Einstein, or have never seen one made. 6. Make a rolling pin like the ones you use from Green Stuff World. Not everyone can afford to buy these and showing how to make one or two with either a flagstone, brickwork, cobble or pavement pattern would make a great video as no-one else has done this in RUclips & I have checked ! 7. How to create a leaf cutting stamp. These are expensive for what they are and there must be a way to create your own - the terrain creation world is depending on you to come up with the solution. 8. Miniature woodworking tools - make some that are useful for crafting in miniature scales with a budget of no more than $10.00 per tool. Such as motorised bench saw, miniature jig saw, mini disc sander, mini flat sander, motorised paint stirrer, pillar drill stand to make perfectly vertical holes, mini drill, mini chisels for altering wood shapes, tiny hammer 🔨, make a bench board to hold work so it doesn't move, has moveable long, flat, metal holders with screw adjusters on the end, so you adjust the pressure, or allow for thicker or thinner pieces etc. As far as the motorised stuff, they don't have to be ultra powerful, but they do need to be solid, and run off either a rechargable battery, or mains via socket, and be enclosed and ultimately safe ! You can cheat and use the insides of a childs rechargeable toothbrush from a cheapy shop to make things easier for you, but the cost of this must be included in the $10 budget. 9. Storage systems for various items such : as all the tools you use, hand tools brushes components paper & card stocks plastic (rods & sheets) foam various rolls of differing sizes & thicknesses spray cans not shelf based (maybe moveable upright, slot system based & can accommodate various sized cans different flocks & ground cover, not left in the plastic bags they come in that leak everywhere This is so you don't waste half your build time looking for stuff you know you have, but just can't remember where you stored it ! Again, think minimal cost, or no money and see what you can create - raiding of dumpsters, unwanted offcuts from woodworking places, or scrounging from office supply companies, companies who are moving, refurbishment businesses, etc is totally allowed. 10. Metal work accessories - how to use a soldering iron to make stuff in miniature, without burning your fingers ! Including : the best wire to use making a mini brass bucket and chest how to bend hollow rods without buckling them how to solder them how to connect them in to right angles, circles & T-junctions how to create frames how to create cages how to create locks how to make girders how to make pylons how to make aerials and other telecoms how to create sonar discs how to create telegraph poles and sprigs etc. 11. How to make your own display cases. 12. How to find and put together a resources pack when your trying to think of a new idea, or theme to work on. For example, if you wanted to make an entirely new terrain board with structures using the idea of post apocalyptic snow bound world, where everything is frozen and tunnels are used to move between buildings, but there are topside buildings that need to be utilised and maintained which have various uses, such as a communication centre with tower, supplies store housing block machine shop energy center wind turbine security fence Show how you would search for, find, select, gather and collate the pictures and info, and then set about creating the buildings based on your research. 12. Create a useful guide for which glue to use with which material. This may seem like a no-brainer, but everyone, including me in the past has had a brainstorm and reached for something thinking "it will be fine", only to use the wrong glue and see it melt the thing I've just spent the past 3 hours working on ! Especially now when there are literally hundreds of different glues, under an array of different names, which all stick different things, but not others. Do a complete run down, including a downloadable chart, showing all the glues, including : brand names of what type they are what they will stick to what they won't stick to what they will destroy ! 14. Clamps ! How to make your own, how and where to buy them, about the different types for different uses, some with lots of pressure some with very little so they don't mark your terrain. 15. How to make snow, in all its forms, from loose powdery, to thick iceberg types, and everything in-between.There are many videos on how to make ground cover and tall bushes, but non on making snow. I hope all this gives you some ideas, as these are all things I have thought about when making terrain, or even if you read it and it sparks some other ideas for you, that's fine.
I love how you stress accessibility for the craft for everyone! Your videos honestly turned me into a crafting DM and brought my games to a whole new level! Thanks again for proving you don't need to be deep into the hobby to make stuff that looks awesome!!!
You sir are my, tabletop crafts, guru. I don't have pictures but your tiles and ideas have inspired me to improve my knowledge of thinking outside the box. I'm still learning how to be a DGM but have been loving making campaign plots and battles. Trying to learn the game details I have a struggle without my notes. God Bless your creativity! Without you, I'd still be in a art depression.
Wow, I never would have thought about drywall tape. Genius! Thanks, Jeremy! I haven't started crafting yet (busy with school) but I can't wait to start creating terrain for our campaign and your guides and tips are so entertaining and useful.
This is fantastic! This is exactly the thing I needed for my next project. I was going to use the plastic granny netting, but this looks so much better. Thanks!
I tried coming up with some fancy way of saying this, but realized that keeping it simple is best. Thank you - for this video and for all the instruction you have provided.
*Bangs head on table for not having thought of all of this before* It's so bloody simple, and I've been faffing about trying to square up balsa dowels.
So Jeremy being the great DollarRama purchaser that you are here is a nice tip for you that I have been using for a while now. When using any kind of glue or doing any kind of glueing get your self a package of parchment paper. It comes in sqaure sheets and round sheets. I also use it for when I am hand painting models or miniature as it really helps to keep my cutting mat clean. So just a nice tip to pass on to your patreons. Blessing Pastor Randy Bourque Calgary
Love the use of the dry wall tape. Have used it in costume builds before. As for tinted 'glass' I have used plastic from packaging as you did and the permeant marker in whatever colour I liked. As a former teacher I often used the permanent over head projector markers.
Thank you! At times one gets boggled down not immediately thinking of a great solution to a problem. This shows just how easy it can be if you just think a little outside the box
This is great. I'm from NZ and sometimes postage is an issue. We also generally have less variety when we go to the store. Thanks for your work and for thinking so carefully about your audience.
This is a clever idea ,I would never of thought of the webbing but it makes sense ..I don’t do models but very interested in all forms of art..You can also using some clear package material if you do not have any coloured sheeting ..You can colour it in using an alcohol marker ,it will give you the same tinted glass look ,or if you just want to colour around the edges of the faux glass to give the dirty lived in effect too..Simple but looks really great 😀
Great video, very inspirational. Over the years as a builder and doing lots of studded walls using dry wall tape and skimming I never would of thought of using this tape for windows. I've always just kept with simple frames, but as I have some tape in my shed I know what I'll be making soon. Cheers, Rick the Bulldog
I usually learn something from your videos. Today I learned the drywall tape leading. Great tip. One for you. Hot wire pen. I've constructed a hot wire pen out of a white out dispenser / roller / Micro switch / 2mm copper pipe / 2" long clip of guitar string. Assembled to resemble an airbrush. Would show photo but. Can't not here anyway.
Thanks! It looks way better than my preferred method, which is to use transparent plastic with cut self adhesive paper labels. I'm sure this come in useful.
Thank you, I am a trash crafter myself. I spend more money on my miniatures then my dioramas. I am building atm a two story modular Inn. I hadn’t worked out how to create windows, your technic has solved my problem. I intend to light the interiors w/ tiny battery op. LEDs. Even the fireplace will have a lit fire.
I know Ace has the black stuff.. not sure if Ace is in Canada.. www.acehardware.com/departments/paint-and-supplies/patch-and-repair/drywall-tape/1821834?x429=true&gclsrc=aw.ds&&gclid=CjwKCAiA7t3yBRADEiwA4GFlI-Y5_-s_Srnl_WnUDa1yIY-eMiLn8t56lwabXXbAMaod9cOi4oXsSRoCROYQAvD_BwE
@@BlackMagicCraftOfficial www.amazon.co.uk/mciskin-Fiberglass-Covering-Waterproof-Mosquitoes/dp/B07K476XSL/ref=sr_1_28?keywords=drywall+tape&qid=1582898920&s=industrial&sr=1-28 - Not exactly the same thing, but black. No clue who sells that in Canada, of course.
Awesome! I recently needed windows and just ended up using parchment paper I had on-hand on the inside so you couldn't see in but some light could get out. Your videos have been super helpful in getting started creating buildings for games. I never realized how easy it could be until seeing your videos and actually trying it. My 7 year old daughter had been enjoying learning how to paint miniatures and build these sorts of crafts with me. She just finished her fist house the other day all by herself (well, I did the cutting but she did everything else), turned out really well!
Awesome video, just a suggestion on a way to better that, try using 2" or 3" wide masking tape, sticky side up stuck to the back of the square and hanging out exposed where you put your window to hold the parts still and so it don't stick to the paper. but yours is a great idea and way to do it, keep up the great work, thanks for showing us.
You can also color clear plastic with sharpies. You'd see the lines from the pen strokes, but not if you were to, say, color every tiny square different to make a patterned stained glass design. Also, you can quickly smear sharpie before it dries with your finger or a tissue to make it more smooth, or blot it with a paper towel or crumpled plastic wrap to give it a textured glass look. There are fun techniques to play with, and you can always wipe it off with rubbing alcohol if you just completely screw it up and need to start over.
That sir was one of the best videos I have seen for usefulness ty - btw - one of the best tools I came up with for crafting when I first started is a we R memory keepers 13 x 13 square glass cutting board. It covers my larger cutting board with a small work surface that is nicely measured for cutting and it is glass which is awesome with glues especially hot glue, and you can paint on it and it cleans up nicely with your exacto removing the paint.
When I saw the thumbnail I thought you might have used Plastic cross stitch canvas. But I love the drywall tape. I have used drywall tape for a million things it wasn't intended for, like adding structural strength to epoxy repairs, so it is great to see yet another use for that giant roll of drywall tape sitting in the workshop.
Hot damn!! Perfect timing for this tutorial! Recently re-watched your episode on the tavern build and am getting ready to do one myself...windows were a stumbling block. Thank you for all of the tips!!
Goddamnit Jeremy. I’ve been looking for a way to make this very thing! You beat me to it, but I’m glad you did. While I would LOVE to support GeBoom, it’s so much more cost effective to make my own. This is a great tutorial and I can’t wait to try it out! Thanks! 🤓
I recently decided to make the leap from player to dm (well, adding dm to my resume, I'll still be playing!) And as a looooooong time crafter, started investigating terrain building as it seemed like the logical thing! (I already have this drywall tape, for instance, and not from construction, lol...and own most of the things I'll need for terrain building.) Just want to say I'm loving your channel for learning how to go about starting my future stockpile of terrain pieces. And you're a fellow Canuck to boot. There were some older videos I've watched where you were doing something where I thought a product/process I knew of from other crafting areas could help, but being older videos, didn't comment on. You usually found your way to them eventually in newer videos (guess maybe there are other multi-disciplinary crafters out there sharing knowledge, lol!) But I hope I may have some little knowledge to share going forward to make up for all the knowledge you're sharing with me (us). Thanks!
For stained glass, you can use color laser printer friendly transparency film and the mosaic tool in photoshop. For small scale, you should get a decent result
I did some stained glass windows for a building I made many years ago. I used wire mesh that's right about the same if not maybe a little bigger, in the square, then drywall tape. For the "glass" I used transparent gel paint, used in crafts such as shirt painting, or those translucent picture things that you can stick to glass over and over again. If you're good at wire bending you can make really nice looking and realistic looking stained glass pictures like seen in churches. Just use copper wire and then use a soldering iron and solder the wire together as well as coat the wire in solder and it will look as real as can be to real lead stained glass. Though doing this is not a fast process in any way shape or form but in the end it is the most realistic looking stained glass I have done and seen for miniatures and the like.
This is a very helpful tutorial. The idea with the colored sheets is pretty good. And the tape again. I need that tape. Have to think of when I am at the hardware store next time. Thank you. Suggestions .. well .. you have a series of scatter terrain videos already. I would like to see more of these. Barricades made of scrap (fantasy scrap, SciFi Scrap, End of days Scrap).
I feel like alot of the problem folks have is creativity. Like trying to find out the materials that would mimic the look they are going for. Btw, love your videos and I made the dungeon tiles from one of your first videos you made.
I wonder if you could enhance the diagnol effect with the drywall tape by pulling the ends a bit and stretching it for more pronounced diamonds instead of squares on their ends. It might even need to be framed or anchored by the edges of sorts to keep the tape from pulling back in it's natural state while painting or at least until you affix it to a clear window like surface. Maybe the frame will also stabilize.
could also double for bulletproof/reinforced glass if placed into a modern/scifi type of structure, although a blue tint might be better than the green tint
Thanks for Doing this one. I was just working on a Gnome Tree House / Hut that needs some Windows and I ALWAYS DREAD doing them. So much so I was looking online for like you use from Shifting lands. Keep on Crafting!
i started watching your videos today and i really love them. could you make a basics video showing the basic equipment one needs for building terrain? thanks alot.
That was awesome. I imagine you could cut smaller pieces of the colored gel sheets and glue them to a clear plastic if you wanted a fancy stained glass look for a church.
Would be a lot of work, but you could do it. Personally I'd take the clear plastic, add the mesh, then colour in as desired with sharpie markers on the back ;)
*I DIDN'T USE PARCHMENT OR WAX PAPER ON PURPOSE*
Paper was chosen specifically BECAUSE the small pieces would stick to it during assembly, making the process much easier. Having the pieces slide around on parchment or glass or wax paper or whatever would be very annoying and make the process way more difficult. This is *especially* true if someone were using a slower drying glue like PVA.
Assembly on parchment is great in many situations and I've done it many times in other videos, but it was not right for this.
What elements are you struggling to find or afford that you would like to see how to hand craft? Let me know and I'll see if I can sort it out.
This video was not sponsored by Shifting Lands by the way...
The stained glass sheets I briefly show are a product being launched along with this kickstarter: kck.st/2M7Hx2L
GEL SHEETS I USED
(USA) amzn.to/2UO8VIV
(Canada) amzn.to/3bKzyEO
(UK) amzn.to/38tzLde
(Germany) amzn.to/38soHNB
(As an Amazon Associate I earn from qualifying purchases)
Video where I make the little tavern diorama: ruclips.net/video/8bQHYCHZmjg/видео.html
Black Magic Craft
video posted: 1 minute ago
Comment posted: 2 weeks ago
Way to go, RUclips, you’ve outdone yourself
@@_Gecko um ... black magic, maybe.
I posted the comment two weeks ago and just made the video public today...Videos don’t get uploaded and immediately go live. Videos are produced and uploaded weeks in advance.
Hey man I am looking at this and looking at the paper and seeing the problems. I have a question... why not use baking tray paper? its non-stick everything will jump off it no problems.
James Colman the whole point of the paper is that you want something to stick to when assembling the frame. You don’t want it sliding all over the place.
Last week: We are making an Eldritch horror, a reviled Goliath which shall taint the land in a shroud of darkness and insanity.
This week: Windows are nice, you can put them in a cute lil’ cottage :)
BMC has all my needs covered.
Some days, you're Hardcore. Some days, you're Cottage-Core.
As an RC plane builder I have a really good tip on how stop your windows from sticking to the paper. Use waxed paper. The work will readily come off of it. You can find it at your grocery store. Put the waxed side up. Easy way to tell the waxed side is to rest your razor and slide it sideways. The wax will build up on the blade. That is the waxed side which is the side you want up to work on.
Yea, I build stuff on parchment paper all the time for this reason. In this case though I intentionally didn't. The adhesion to the paper was an intentional property I wanted to utilize in this. Building tiny fiddly frames, it helps to have them stay in place. Especially if someone were to use a slower drying glue and were making a bunch.
You're the man Jeremy! This past year I've been getting back into hobby after a 10 year hiatus, and you and a few other favorite crafting youtubers have absolutely super charged my efforts and techniques.
The timing of this video for me is like when facebook ads show up advertising things you've been looking for/have thought about. This is super useful and will save me so much money so thank you!
*Jeremy*
Making small incidentals like this is just the type of video I enjoy - it's useful information and helps a load when you can't afford to get pre made stuff from all over the world via the internet.
Please make more videos like this one. Perhaps you could show how to make any of the following :
1. Hinges - both working and for show, not only in metal, but also in clay, or rigid plastic.
2. Various types of roof tiles made in different materials such as clay, card, paper, plastic, foil, metal. Roof tiles such as grey Welsh slate, Italian terracotta, Chinese shingles, Flemish thatch, American Cedar shingles etc.
3. Make a mold so you can then make batches of roof tiles. Either individual tiles or a complete interlocked roofing sheet of tiles that you can later cut to size, and also be able to make it in plastic, plaster or clay.
4. Doors, doorways & door stoops, and all the associated accessories such as :
various types of door handles
doorframes
doorsteps
porch lights
letterboxes
door gargoyles
windows in doors
door porches
door rain covers
various types of hinges
big double Church doors
opening square hatches (to see who is on the outside - think 1960's films with a hidden underground drinking den, where the bouncer would open a small square hatch to see who wanted in, which he then shuts, and opens the big door fully to let them in).
5. Make a stencil in metal preferably, or rigid plastic, for brickwork, so you can put the stencil down on a piece of foam or thick mounting card, secure the stencil, cover the board and stencil with plaster, let it dry a little, remove the stencil, which then leaves a brickwork pattern to dry, which can then be painted, and you have a ready-made brick and indented mortar on a wall, which can account for curves, or be totally straight.
5. How to make a jig. Not everyone can understand how to make a jig (such as my young nephew who didn't know what you meant when you said to "make a jig to do this"). Explain how to work out what you need, and how to then go about making a jig. This would be useful for people who are not exactly Einstein, or have never seen one made.
6. Make a rolling pin like the ones you use from Green Stuff World. Not everyone can afford to buy these and showing how to make one or two with either a flagstone, brickwork, cobble or pavement pattern would make a great video as no-one else has done this in RUclips & I have checked !
7. How to create a leaf cutting stamp. These are expensive for what they are and there must be a way to create your own - the terrain creation world is depending on you to come up with the solution.
8. Miniature woodworking tools - make some that are useful for crafting in miniature scales with a budget of no more than $10.00 per tool. Such as motorised
bench saw,
miniature jig saw,
mini disc sander,
mini flat sander,
motorised paint stirrer,
pillar drill stand to make perfectly vertical holes,
mini drill,
mini chisels for altering wood shapes,
tiny hammer 🔨,
make a bench board to hold work so it doesn't move, has moveable long, flat, metal holders with screw adjusters on the end, so you adjust the pressure, or allow for thicker or thinner pieces etc.
As far as the motorised stuff, they don't have to be ultra powerful, but they do need to be solid, and run off either a rechargable battery, or mains via socket, and be enclosed and ultimately safe ! You can cheat and use the insides of a childs rechargeable toothbrush from a cheapy shop to make things easier for you, but the cost of this must be included in the $10 budget.
9. Storage systems for various items such :
as all the tools you use, hand tools
brushes
components
paper & card stocks
plastic (rods & sheets)
foam
various rolls of differing sizes & thicknesses
spray cans not shelf based (maybe moveable upright, slot system based & can accommodate various sized cans
different flocks & ground cover, not left in the plastic bags they come in that leak everywhere
This is so you don't waste half your build time looking for stuff you know you have, but just can't remember where you stored it ! Again, think minimal cost, or no money and see what you can create - raiding of dumpsters, unwanted offcuts from woodworking places, or scrounging from office supply companies, companies who are moving, refurbishment businesses, etc is totally allowed.
10. Metal work accessories - how to use a soldering iron to make stuff in miniature, without burning your fingers ! Including :
the best wire to use
making a mini brass bucket and chest
how to bend hollow rods without buckling them
how to solder them
how to connect them in to right angles, circles & T-junctions
how to create frames how to create cages
how to create locks
how to make girders
how to make pylons how to make aerials and other telecoms
how to create sonar discs
how to create telegraph poles and sprigs etc.
11. How to make your own display cases.
12. How to find and put together a resources pack when your trying to think of a new idea, or theme to work on. For example, if you wanted to make an entirely new terrain board with structures using the idea of post apocalyptic snow bound world, where everything is frozen and tunnels are used to move between buildings, but there are topside buildings that need to be utilised and maintained which have various uses, such as
a communication centre with tower,
supplies store
housing block
machine shop
energy center
wind turbine
security fence
Show how you would search for, find, select, gather and collate the pictures and info, and then set about creating the buildings based on your research.
12. Create a useful guide for which glue to use with which material. This may seem like a no-brainer, but everyone, including me in the past has had a brainstorm and reached for something thinking "it will be fine", only to use the wrong glue and see it melt the thing I've just spent the past 3 hours working on ! Especially now when there are literally hundreds of different glues, under an array of different names, which all stick different things, but not others. Do a complete run down, including a downloadable chart, showing all the glues, including :
brand names
of what type they are
what they will stick to what they won't stick to
what they will destroy !
14. Clamps ! How to make your own, how and where to buy them, about the different types for different uses, some with lots of pressure some with very little so they don't mark your terrain.
15. How to make snow, in all its forms, from loose powdery, to thick iceberg types, and everything in-between.There are many videos on how to make ground cover and tall bushes, but non on making snow.
I hope all this gives you some ideas, as these are all things I have thought about when making terrain, or even if you read it and it sparks some other ideas for you, that's fine.
The leaded window effect really sells and elevates this one, and I love the green tint giving it all a nice antique glass vibe.
The drywall tape idea is absolutely brilliant!
I love how you stress accessibility for the craft for everyone! Your videos honestly turned me into a crafting DM and brought my games to a whole new level! Thanks again for proving you don't need to be deep into the hobby to make stuff that looks awesome!!!
Mate. This is gold.
Excellently showcasing all the tiny steps into making it look like a highquality windows.
You sir are my, tabletop crafts, guru. I don't have pictures but your tiles and ideas have inspired me to improve my knowledge of thinking outside the box. I'm still learning how to be a DGM but have been loving making campaign plots and battles. Trying to learn the game details I have a struggle without my notes. God Bless your creativity! Without you, I'd still be in a art depression.
Wow, I never would have thought about drywall tape. Genius! Thanks, Jeremy! I haven't started crafting yet (busy with school) but I can't wait to start creating terrain for our campaign and your guides and tips are so entertaining and useful.
This is fantastic! This is exactly the thing I needed for my next project. I was going to use the plastic granny netting, but this looks so much better. Thanks!
Yea, the granny grating is ok, but the scale is way off. Better suited for big iron bars than small leading.
I use a non-slip mesh that's intended to be put underneath rugs. "STOPP" from Ikea works well and is just about in scale.
@@BlackMagicCraftOfficial Have you ever painted the granny grating? Any recommendations?
Eric Burdo in several videos (two recent ones actually)......spray primer.
Dry wall tape... BRILLANT. TY
I tried coming up with some fancy way of saying this, but realized that keeping it simple is best. Thank you - for this video and for all the instruction you have provided.
Total Awesomeness////
*Bangs head on table for not having thought of all of this before*
It's so bloody simple, and I've been faffing about trying to square up balsa dowels.
The drywall tape idea is brilliant.
One more thing to buy next time I go to the hardware store.
So Jeremy being the great DollarRama purchaser that you are here is a nice tip for you that I have been using for a while now.
When using any kind of glue or doing any kind of glueing get your self a package of parchment paper. It comes in sqaure sheets and round sheets.
I also use it for when I am hand painting models or miniature as it really helps to keep my cutting mat clean.
So just a nice tip to pass on to your patreons.
Blessing
Pastor Randy Bourque
Calgary
Love the use of the dry wall tape. Have used it in costume builds before. As for tinted 'glass' I have used plastic from packaging as you did and the permeant marker in whatever colour I liked. As a former teacher I often used the permanent over head projector markers.
I never would have thought to use gels. Fantastic improvisation
Best looking windows I’ve seen!
Thank you! At times one gets boggled down not immediately thinking of a great solution to a problem. This shows just how easy it can be if you just think a little outside the box
This is great. I'm from NZ and sometimes postage is an issue. We also generally have less variety when we go to the store. Thanks for your work and for thinking so carefully about your audience.
This is a clever idea ,I would never of thought of the webbing but it makes sense ..I don’t do models but very interested in all forms of art..You can also using some clear package material if you do not have any coloured sheeting ..You can colour it in using an alcohol marker ,it will give you the same tinted glass look ,or if you just want to colour around the edges of the faux glass to give the dirty lived in effect too..Simple but looks really great 😀
You can pull the tape gently to stretch the holes into a longer diamond shape.
The sheetrock tape is frackin genius! You rock!
Keep up the good work BMC! Suggestions? Modern doors... please.
Love that little turn to offset the pattern into diamond. Very cool. 👍🏻
WOW. Thanks Jeremy!! I’m here frustrating my windowless tavern so thanks for this tutorial 😂
Great video, very inspirational. Over the years as a builder and doing lots of studded walls using dry wall tape and skimming I never would of thought of using this tape for windows. I've always just kept with simple frames, but as I have some tape in my shed I know what I'll be making soon. Cheers, Rick the Bulldog
Freeking amazing!!
Absolutely love what you do, excellent.
I usually learn something from your videos. Today I learned the drywall tape leading. Great tip. One for you. Hot wire pen. I've constructed a hot wire pen out of a white out dispenser / roller / Micro switch / 2mm copper pipe / 2" long clip of guitar string. Assembled to resemble an airbrush. Would show photo but. Can't not here anyway.
Excellent lesson
Thanks! It looks way better than my preferred method, which is to use transparent plastic with cut self adhesive paper labels. I'm sure this come in useful.
Thank you, I am a trash crafter myself. I spend more money on my miniatures then my dioramas. I am building atm a two story modular Inn. I hadn’t worked out how to create windows, your technic has solved my problem. I intend to light the interiors w/ tiny battery op. LEDs. Even the fireplace will have a lit fire.
Great craft idea
I love it, I'm new to the craft but was actually walking down this same path to create windows. Nice implementation.
I love this! So clever!
Thanks. Great info. Handy for my 1/35 military modeling dioramas.
The lighting gels are such an awesome idea!
For the light gels, you can get dividers at the dollar store sometimes that are clear plastic.
Ha! I've been doing this one for a while. Finally one step ahead. Drywall tape comes in black too.
Really? Never seen it in black. That would save a lot of hassle!
I know Ace has the black stuff.. not sure if Ace is in Canada..
www.acehardware.com/departments/paint-and-supplies/patch-and-repair/drywall-tape/1821834?x429=true&gclsrc=aw.ds&&gclid=CjwKCAiA7t3yBRADEiwA4GFlI-Y5_-s_Srnl_WnUDa1yIY-eMiLn8t56lwabXXbAMaod9cOi4oXsSRoCROYQAvD_BwE
@@BlackMagicCraftOfficial www.amazon.co.uk/mciskin-Fiberglass-Covering-Waterproof-Mosquitoes/dp/B07K476XSL/ref=sr_1_28?keywords=drywall+tape&qid=1582898920&s=industrial&sr=1-28 - Not exactly the same thing, but black. No clue who sells that in Canada, of course.
Thank you for this video, You continue to motivate us to keep crafting
Getting into this type of crafting today
Jeremy, I LOVED this edition! Those windows look amazing!
Awesome job.
Very cool! Thanks!
Awesome! I recently needed windows and just ended up using parchment paper I had on-hand on the inside so you couldn't see in but some light could get out. Your videos have been super helpful in getting started creating buildings for games. I never realized how easy it could be until seeing your videos and actually trying it. My 7 year old daughter had been enjoying learning how to paint miniatures and build these sorts of crafts with me. She just finished her fist house the other day all by herself (well, I did the cutting but she did everything else), turned out really well!
Love this idea!
Awesome video! Thanks 😊
Awesome video, just a suggestion on a way to better that, try using 2" or 3" wide masking tape, sticky side up stuck to the back of the square and hanging out exposed where you put your window to hold the parts still and so it don't stick to the paper. but yours is a great idea and way to do it, keep up the great work, thanks for showing us.
Love your videos :) Most relaxing part of my week! Keep up the great work.
You can also color clear plastic with sharpies. You'd see the lines from the pen strokes, but not if you were to, say, color every tiny square different to make a patterned stained glass design. Also, you can quickly smear sharpie before it dries with your finger or a tissue to make it more smooth, or blot it with a paper towel or crumpled plastic wrap to give it a textured glass look. There are fun techniques to play with, and you can always wipe it off with rubbing alcohol if you just completely screw it up and need to start over.
The "leading" also works well in more modern settings for the wires in security glass often seen in asylums, schools,. and hospitals
Yea, in that situation I'd just not rotate it the 45d and give it more of that square grid look. Would work well.
That sir was one of the best videos I have seen for usefulness ty - btw - one of the best tools I came up with for crafting when I first started is a we R memory keepers 13 x 13 square glass cutting board. It covers my larger cutting board with a small work surface that is nicely measured for cutting and it is glass which is awesome with glues especially hot glue, and you can paint on it and it cleans up nicely with your exacto removing the paint.
Hell yeah! Thanks for figuring this out
Awesome how to!!
Major coolness. Your tutorials are awesome & helpful.
You asked for a challenge. How would you make a playable flying carpet?
When I saw the thumbnail I thought you might have used Plastic cross stitch canvas. But I love the drywall tape. I have used drywall tape for a million things it wasn't intended for, like adding structural strength to epoxy repairs, so it is great to see yet another use for that giant roll of drywall tape sitting in the workshop.
Super nice build man!
Love this!!! Thanks for sharing!
Hot damn!! Perfect timing for this tutorial! Recently re-watched your episode on the tavern build and am getting ready to do one myself...windows were a stumbling block. Thank you for all of the tips!!
Very nice Jeremy, you are a inspiration to everybody who is starter in this hobby.
Thank you for your good work helpin us
.
Hugs from Brazil!
Goddamnit Jeremy. I’ve been looking for a way to make this very thing! You beat me to it, but I’m glad you did. While I would LOVE to support GeBoom, it’s so much more cost effective to make my own. This is a great tutorial and I can’t wait to try it out! Thanks! 🤓
So ready to do this thanks
Nice work
Your methods really show that you've done some construction. Maybe siding or finish carpentry. Same method I would use on fascia and trim.
I was a residential carpenter doing renovations for about 10 years, then was in construction management. So, yup. You are correct.
I recently decided to make the leap from player to dm (well, adding dm to my resume, I'll still be playing!) And as a looooooong time crafter, started investigating terrain building as it seemed like the logical thing! (I already have this drywall tape, for instance, and not from construction, lol...and own most of the things I'll need for terrain building.) Just want to say I'm loving your channel for learning how to go about starting my future stockpile of terrain pieces. And you're a fellow Canuck to boot.
There were some older videos I've watched where you were doing something where I thought a product/process I knew of from other crafting areas could help, but being older videos, didn't comment on. You usually found your way to them eventually in newer videos (guess maybe there are other multi-disciplinary crafters out there sharing knowledge, lol!) But I hope I may have some little knowledge to share going forward to make up for all the knowledge you're sharing with me (us). Thanks!
Nice looking window. Thanks for the tutorial Jeremy.
One of your most creative videos. Great piece of advice. Thanks !
nice work, i think you scratch build ideas are great. dry wall mesh tape! smart.
Yay drywall tape! That’s was a sweet idea with the gels too...I wonder if I have the patience for a stain glass motif with it🤔😂
For stained glass, you can use color laser printer friendly transparency film and the mosaic tool in photoshop. For small scale, you should get a decent result
I did some stained glass windows for a building I made many years ago. I used wire mesh that's right about the same if not maybe a little bigger, in the square, then drywall tape. For the "glass" I used transparent gel paint, used in crafts such as shirt painting, or those translucent picture things that you can stick to glass over and over again. If you're good at wire bending you can make really nice looking and realistic looking stained glass pictures like seen in churches. Just use copper wire and then use a soldering iron and solder the wire together as well as coat the wire in solder and it will look as real as can be to real lead stained glass. Though doing this is not a fast process in any way shape or form but in the end it is the most realistic looking stained glass I have done and seen for miniatures and the like.
Really great ideas for materials and well done on the build and presentation. Thanks man!
Great video!
Very cool
I'd love to see your ideas for scratch building trees!
I have a few videos...
@@BlackMagicCraftOfficial Sorry, dude. I needed to scroll back through your catalog a bit more. 😖
Pretty slick, man. Now to research and create stained glass windows (shrines, ruins, etc for Brets or knightly factions in general).
This is a very helpful tutorial. The idea with the colored sheets is pretty good. And the tape again. I need that tape. Have to think of when I am at the hardware store next time.
Thank you.
Suggestions .. well .. you have a series of scatter terrain videos already. I would like to see more of these. Barricades made of scrap (fantasy scrap, SciFi Scrap, End of days Scrap).
Love this kind of repurposing!
awesome windows, great video
another great video. thank you
This is a legit great video. So useful.
I feel like alot of the problem folks have is creativity. Like trying to find out the materials that would mimic the look they are going for. Btw, love your videos and I made the dungeon tiles from one of your first videos you made.
Yooo snap dude these are dope!! Windows and pieces like that really complete a build and this is a really awesome way to DIY it
I wonder if you could enhance the diagnol effect with the drywall tape by pulling the ends a bit and stretching it for more pronounced diamonds instead of squares on their ends. It might even need to be framed or anchored by the edges of sorts to keep the tape from pulling back in it's natural state while painting or at least until you affix it to a clear window like surface. Maybe the frame will also stabilize.
could also double for bulletproof/reinforced glass if placed into a modern/scifi type of structure, although a blue tint might be better than the green tint
Perfect!!!
I'd never have thought of drywall tape, Cheers!
Excellent tip!!! Thanks a lot.
Thank you for the link to get the mesh tape in Germany as well. So, I was able to get me one of those tapes today ....!
Thanks for Doing this one. I was just working on a Gnome Tree House / Hut that needs some Windows and I ALWAYS DREAD doing them. So much so I was looking online for like you use from Shifting lands. Keep on Crafting!
Bro, fantastic video!!!
i started watching your videos today and i really love them. could you make a basics video showing the basic equipment one needs for building terrain? thanks alot.
That was awesome. I imagine you could cut smaller pieces of the colored gel sheets and glue them to a clear plastic if you wanted a fancy stained glass look for a church.
Would be a lot of work, but you could do it. Personally I'd take the clear plastic, add the mesh, then colour in as desired with sharpie markers on the back ;)
@@BlackMagicCraftOfficial that sounds a lot easier.
Cool video.
Those windows look amazing, another excellent tutorial!
Awesome