This is great James. One more video to make your channel the best CNC reference on YT! You are always my goto resource. I never knew i could create my own shortcuts! Thats huge
First of all, thank you for "existing", your channel is my favorite but being Italian sometimes I have to deal with the language, which I speak fairly well, but which prevents me from immediately understanding the content of your videos… So, I have two questions to ask you: What are the differences between Carveco Maker and Carveco Maker +? Using one of the two software above do I need to use G Code Generator or do they generate it automatically? In few word from my project to my CNC machine do I need to go through the G-Code Generator? Thanks again for your availability.
I cannot center a vector by using F9 key. I have to go up to the top and use align to center. Is it possible to change the F9 default somehow, that I may have switch mistakenly?
150+ Fluting Profiles
jamesdeandesigns.com/shop/
Carveco Maker
store-us.carveco.com/?ref=JDDesigns
Discount code JAMESDEANDESIGNS
CNCWITHME
www.cncwithme.com
Discount code JAMESDEANDESIGNS
Jenny Bits
www.cadencemfgdesign.com/?ref=JDDesigns
10% off code: JAMESDEANDESIGNS
This is great James. One more video to make your channel the best CNC reference on YT! You are always my goto resource. I never knew i could create my own shortcuts! Thats huge
@@GillTeeGifts thank you 😊
Thanks James. Tips and tricks are always appreciated.
Yes, please do more of these. I am still learning hte software so any info is helpful.
Thanks for the cheat sheets James 👍🏽 I always struggle remembering the shortcut buttons, nice one 😊
@@MikeSmith-pc9nr no problem 👍
Thank you! I was trying to figure out how to edit my toolbars and create shortcuts. This will be a huge help
@jbruning77 glad its helped 👍
Great to see a software review instead of more hardware!!!
Do some more software reviews jimmy James!!
@BeamMeUpLaserEngraving I try and do a bit of everything but aware I hadn't done a Carveco video for a while 👍
Great video!! Thank you!
Very useful, thanks
Awesome Mate😊
First of all, thank you for "existing", your channel is my favorite but being Italian sometimes I have to deal with the language, which I speak fairly well, but which prevents me from immediately understanding the content of your videos…
So, I have two questions to ask you:
What are the differences between Carveco Maker and Carveco Maker +?
Using one of the two software above do I need to use G Code Generator or do they generate it automatically? In few word from my project to my CNC machine do I need to go through the G-Code Generator?
Thanks again for your availability.
Main differences is Maker+ has more tools, primarily for 3D sculpting but a few others as well.
Carveco generates the Gcode for you 👍
I cannot center a vector by using F9 key.
I have to go up to the top and use align to center.
Is it possible to change the F9 default somehow, that I may have switch mistakenly?
Yes, in the tip about shortcuts I show you how to go in and edit/set your own shortcuts. You should be able to set something else other than F9