Here's Everything Wrong or Broken on My 2001 C5 Corvette
HTML-код
- Опубликовано: 6 авг 2024
- This is my 2001 Chevrolet Corvette C5 I purchased for $9,000. With 106,000 miles, this C5 is in very good shape. But as to be expected, it does have some issues. Here is everything that's either wrong or broken on my C5 Corvette.
Check out my Instagram - / drivehub__
Subscribe to DriveHub- goo.gl/i8UcdT
The exhaust equipped on this Corvette is a Borla S-Type. Check it out here; amzn.to/39HFL2s
Buy Now, Pay Later with Abunda:
Borla Exhaust System - www.shopabunda.com/products/b...
For more of this C5 Corvette click here; • DriveHub - C5 Corvette
#ChevroletCorvette #Corvette #C5Corvette 
Авто/Мото
I know some people will look at me like I have 3 heads, but the C5 Vette is a dream car of mine .Well besides the Eleanor Mustang. Someday I'll get one, its definently achievable.
It’s absolutely an attainable dream car and that’s what’s so great about Corvettes in general! Eleanor Mustang is another great choice! What a fantastic car, just a little more pricey than the Corvette 😐 Keep grinding and get that C5! Let me know when you do!
richard c The C5 is one of the nicest corvettes GM ever came out with. No one is looking at you like you have three heads 😂
@@rickhunter6513 i know but usually most people's dream cars are usually in the 6 digit figures like Ferraris or Lambos. Mine is just a 97-04 vette that can be had for under 10k lol.
I mean i could go out and buy one, but living in the northeast is hard on these cars and i dont have a garage. Or a winter beater. Plus prices up here are insane compared to what i been looking at down south.And I have a wife and kids. So right now its kind of tough. I guess im just scared to pull the trigger on one and finding out its a lemon. I just got to keep researching and keep looking until the iron gets hot and then I'll strike on a really good deal when i see one.
richard c I remember when C5 came out in 97 and it immediately vaulted up to one of my dream cars and it was not cheap back then. I think the design is timeless and still looks better than the last couple iterations of the corvette.
300zx is also another dream car I could never hope to attain back when they came out. Unfortunately they are nowhere near as reliable as the C5
Hope you get your C5 one day. They are amazing vehicles 👍🏼
i have a c5. reverse lights is the switch on the side of the transmission. oil pressure is sender under intake manifold in the back. all easy and cheap. do it the right way. an hour of work.
BE VERY CAREFUL WITH THE INTAKE BOLTS when i did my oil pressure sender i snapped two of the bolts
No way it's an hour of work. Just did my oil pressure sensor and it was about 5 hours including the trip to AutoZone. Plus I had to bring back the loaner socket the next day so it was 5.5 hours. Yes, I took the intake manifold off. No f***ing way you're getting in back there without pulling it. I tried.
I've watched more 'things about my Corvette I don't like' videos than I care to mention, and watching this on the issues you've had thus far was hands down, the best. You've got style, fun transitions, and no fluff. Well done and looking forward to more of your posts. (for what it's worth, I'm a C7 Stingray owner.)
Just bought a 2000 with 86k miles for $8,500. Clean title
killer fkn deal man! hope your enjoying the car
I bought a 98 c5 with 55k miles for only 9k, after a year ive had 0 issues :)
I’m really starting to look into a c5 and I think I want to get it. I just don’t get how you found one with such little miles and price😂
@@matthansen8693 seriously I want one to and there like 14k and like 140,000 miles
I had the same issue with the blinkers on my 2002 Monte Carlo. I changed the hazard light switch button and it fixed the problem. I recently bought a C5 Corvette and I'm loving it, no issue so far.
Thanks. I'm presently looking around for a C5 and your video and confidence is a huge assist to open my mind. Very good.
Hopefully they are easy fixes for you! Beautiful Corvette and awesome video thanks for being transparent with us
Thanks Tom! I hope they are simple too 😁
Good stuff I changed my oil pressure sending unit without removing or drilling into anything. Patience is necessary. I upgraded to led fog lights and projector lenses by radio flyer innovations.
Well done video. Thanks for posting it.
Way back in the early 70's, I owned a 1962 Vette. I had some of the same issues. LOL.
Some relayed to electrical grounding.
Frank
Have you tried reading the codes thru the D.I.C.... I have an 04." 24 hrs at lemans special edition" convert. lemans blue. bought in 2015. 81000 miles. Reflector missing in door. Grille broken in dashboard. Side marker lights inop. Dry rotted tires and bad tpms. On the good side. The interior was in almost perfect condition. Seats were worn but not all screwed up in the bolsters. the top is in perfect working order. The paint job was in very good shape. Everything from the radio to the gauges all operational. I caught the tire problem before I bought it so I got a free set of Bridgestone runflats. The pressure sensors came from Les Schwab for $400.00. right now it's in complete running order. The LS 1 engine and the under the hood is showroom clean and runs great. Only problem is premium fuel is about $3.60 a gal now. Find a good auto shop and get it done. The Corvette is America's sport car.
I recently did the solder reflow of the hvac display, was not particularly easy but not entirely difficult either, however Im a master technician by trade, so ive soldered quite a few things in my day. The thing is that you need to be really careful with the iron and sure about what items need to be reflowed. Im sure youve probably already tackled it but yeah definitely go for it!
My mom’s 2007 Tahoe just had the same problem with the oil pressure sending unit (her gauge was reading 0 psi). I had to sit on the front of the SUV with my feet in the engine bay and reach all the way to the back of the motor, right up against the fire wall, and replace the part blindly. It wasn’t terrible, but if my hands were any bigger it would have been a nightmare haha. Best of luck on fixing up your C5, I really want one and I’ll have enough saved up come Spring 2021!
Great review! I own a 2004 Z06 with 60,000 miles on it. I have encountered a number of minor issues all fairly simple fixes. The Z06 didn’t come with fog nights so I installed PIAA motorcycle driving lights. I find it curious that all your exterior light issues are on the driver’s side. There are a number of common grounds on you car, might be a place to start. The Corvette Forum has a great technical section and some seriously experienced mechanics to help with any issues you may encounter. One upgrade you may consider is Bixenon headlights, those factory headlights are near useless if you drive at night. I also have an MGW short throw shifter which improves the driving experience.
All of the things you listed are easy to fix. If you need a complete walkthru to fix them best place is the Corvette Fourm in the C5 section. Every tutorial you will ever need is there. I have been on it for years and there is not one question that thousands of owners have failed to fix. Nice buy and nice car welcome to the "asylum".
Nice video! Looking forward to seeing more of your C5. (Subscribed) Want to hear whats wrong with my C3 Vette 🤣
Enjoying the videos, glad to find a car channel that's close to local for me. #Vermonter
Good looking out, I'm looking for a nice c5, helpful tips.
I had a 2001 and everything you'r going through, happend to me as well. I eventually had more electrical issues switching things to LED later on. Be careful. Switching electrics leads to more gremlins later. The car always ran like a champ though.
It still good for a 20 year old car
I just bought my first Vette 4 days ago. 2001 ZO6... First time in 40 year life I am actually in Love!!!!
Great Buy... thank you for the Video
Hi!! Just love your channel, keep up the great work!! I too, got myself a 2004 convertible C5 which, was a dream of mine for many years. I have the same issue you have with the reverse lights. What did you come up with to fix that issue? It burns me to no end to have to back up in my driveway without any kind of lights...!!! Looking forward to read your reply. Thank you!!
Thanks for posting. I have a 2001 Z06
Dave's Corvette Illuminations for the A/C control. Good work, fast service.
I bought a C5 convertible with 41,000 for $18,000 from a co-worker who had five Vettes. It is in showroom condition: bright red with tan top and interior, tuned exhaust and modified to produce about 450 hp. I had to replace the clutch ($2,600) and had the steering Column lockout problem. After three lockout failures, I replaced with a bypass on sale on internet. I replaced the radio with modern system that includes backup camera. No other problems, though I only have 49,050 miles on it. The car looks and sounds great and is a hoot to drive. I am more a motorcycle guy with four bikes.
I like the C5 too! My dream car is a C6 and I’m getting in the next 2 years
Tobias K. Same for me i plan one buy a c5 corvette in 2 years. Gotta love the pop ups
Tobias K. Great cars. I like C5 more because it’s the last year of the pop up headlights. That truly sells me on it!
I know you said you want a c6 but I'd suggest you do a lot of research on them bc iv hear people complain about the c6 way more then any other corvette.
bought my c6 ls3 a few years ago with 90k miles had some normal stuff go out battery fan plug melted( just hard wired for over a year now) around 102k i went ahead and cammed it and had all the moving parts replaced been running strong since dad drove his c5 up to 190k before he sold it. enjoy the car man!
I have a 2002 c5 same color 6 speed with a few issues. Like you I love the car
So far I would buy it good luck with it and enjoy hopping to buy one soon .
I’m 21 and at 20 I had a 92’ C4 convertible and that thing was fucking dope. now I’m looking at a C5 to be my daily driver for years to come
Nice, honest video👍🏼😁
I did the oil pressure sensor back in 08 on mine, then it started leaking so this time I did the relocation kit to move it under the fuel rail cover. Now I never have to take my intake manifold off again. I'm lucky I haven't lost a fog light yet, but I dont use them much. Changing those running light bulbs is not fun. I always scrape my hand. I did the HVAC diagram on corvette forum. Do leds for the bulbs while you are there. And it is the 8 surface mount resistors that need to be reflowed. That will fix the screen.
Can't wait to review it!
I bought an 05 C6 recently for 11.2k @ 100k miles. I took it to the dealer and it needed 2k of work with a heavy discount. I let them do it all since I don't have the time or a lift, and now it drives PERFECT! Fix the little things and you'll be even happier with the car. Currently upgrading the sound deadning, carpet and sound system in mine.Great value I think considering the LS motors are beast!
Doesn't seem very bad. Enjoy the Corvette
same hvac control problem on our c5. very simple for us to fix. reveal the printed circuit board , grab tweezers and unsolder the group of flat resistors (6 or 8, I think). (Most of them have defective solder adhesion to the print on one end. You can just heat one side at a time and if the resistor drops, the other end was defective.) Re-tin the print, and sweat solder the resistors back on.
I just replaced my taillights and front turn signals with LEDs they look fantastic I had the same oil pressure sending unit problem.
I love the video l have a 2000 c5 with 153k runs and drives awesome. Only issue it the traction control abs is being an ass. Other then that its awesome
Man, I better check my reverse lights. Come to think of it, I'd better check all of my lights. Just bought my '97 42k C5 about 4 months ago and haven't checked any lights. But I know the fog lights and headlights work. Like your vids👍
Great Vid I wish I had a video like this before I bought my LT1 Optijunk 92' vette...Okay where do I start with mine.. 2000 all the same issues(I think thats why they end up for sale) as you had but to expand particularly the oil pressure sender unit they literally suck ass so trust me YOU WILL end up cutting an access panel in the cowl after you spend 3hrs trying to fit a 27mm socket back there only to have it go out 3mos later.. I ended finding a guy on amazon that was selling them for 6 bucks when they cost about 3x that soooo.. I bout like 8 of them because you WILL have it go out again and replacing it in 5min instead of hours... you will cut it.. AND take note they also fail in the OTHER direction!! everyone talks about them pegging the gauge well Ive had them fail to where theres NO oil pressure and THAT is scarier.. A new oil pump is basically an engine rebuild but good thing when presented with this scenario, a failed oil pump will INSTANTLY sound like someone tossed a jar of quarters into the crankcase so IF it says Zero pressure with a smooth idle... its the oil sender but failed in the opposite direction..
CLUTCH: You WILL be doing this around 120k usually the slave cylinder will fail first with the pedal sticking to the floor and its connected inline with the drive shaft sooo if that happens a new cylinder is only $70 BUT the labor to get to it is $1500-$1800.. in fact the driveline is ALL LABOR so dont go cheap PERIOD even if the clutch is good replace it with the LS7 version (part# LUK 04-905) its a stiffer, grabbier clutch as a replacement unless youre modding the engine if not the kits only $275 ALSO.. get a Hinson Remote bleeder since theres no way to do it(except for the ranger method) to purge the clutch dust that accumulates and eventually will lead to clutch failure again.. so while they have the back end down, replace master seals, axle seals, differential gasket, torque tube gaskets..
LIGHTS Go LED all the way.. Headlights may not draw enough voltage to activate the lift motors in my case reversing the polarity fixed it but I have to remember that the lights get out of sync and I have to put he highbeam on before turning them on annoying when I forget but the brightness over regular bulbs is night and day..literally.. make sure the LEDs are 12000 lumens for the highbeans and 8000 lumens for Lo's temp = 6500k is bluish white (incandescent) I recently had tried to make an additional instake vent with the front nose until I discovered it actually didnt go where I thought it went and now I had a big hole in front so I re-purposed it and installed a set of Angel Eyes + LED Fogs for a Jeep cherokee and the Angel eyes work as DRLs with the corner lights (always on) the fogs turn on at the second position and theyre bright enough to drive without the headlights on if i choose.. Corner DRLs are switchbacks
Heres with them in DRL mode: drive.google.com/file/d/1BxH_mCZpbxE-qjfR86qXCNcE0O7GG7Ry/view?usp=sharing
Heres with them in Fog light mode: drive.google.com/file/d/1x-4BjGBjGITZOaqzbRDCB28gyrhemqDL/view?usp=sharing
wow for that price you still got a great deal. i paid a little bit more for mine even though it had more miles than yours
Great car for the mileage. Just purchased a 2003 C5 with 14k miles. Do you highly recommend the Borla S cat back for my 4 speed automatic? Also wanted to take a suggestion after market brand for steering wheel replacement. Thanks!
I have 2 C5's. A 97 with 230,000 miles and a 2004 with 42,000 miles. I would almost bet that you light and turn signal problems are going to be a bad ground issue. The oil pressure sensor problem is not that bad. You can use a long pair of needle nose plyers to pull the wire and the get a socket and extension with a wobble joint and you can get it down behind the manifold to loosen it up. Some people are faster than others to get it. But on average I would say start to finish is a couple of hours at best. Good luck. Great car for the money. Also a good video.
Thanx, good to know what i should be looking at and testing when purchasing my next vette. I want a C-6 though.
Here’s some C6 information for you; ruclips.net/video/gKCdr5Cwy0c/видео.html
I have a 2004 C5 Commemorative Edition and I'm currently living in Maine. And I daily drive mine. Even now. In the middle of winter. You could be surprised as to how well this car handles snow and ice so long as you have a decent set of tires. And common sense of course.
You can buy a a/c unit on eBay then watch a video on how to install it. The oil pressure on the other hand is very important since I check that all the time while I’m driving. But right now what you also might want to do is make sure that rain doesn’t get into your car. This is a common issue with these cars. I’ve experienced it with my car it sucks really bad and hopefully I don’t get mold in my car. Good luck with that C5 that is also a great price for that one. I got mine for 15k but it has 30k miles on it.
The heater control is super easy. Soldered mine in about 2 minutes. Flux is your friend as is the thinnest solder you can find. Flasher is easy except I think you might have to take the radio surround out to get to it. Mine had a few issues. Abs unit needed the solder repair that is all over the internet. Headlight gear replacement. I had a few electrical issues that were completely resolved by changing the ignition switch. Keep the battery charged if it sits. All sorts of issues if your battery is low.
Is minor repairs, is a nice corvetteeee good luck 👍
Oil pressure sending unit did the same thing on my C5. I fixed it quickly.
I have a 2002. It had every problem that have. All corrected now. I have owned it for 4 years and the last 2 have been problem free. I put around 10k miles a year on it. Great affordable sports car!
I did the oil pressure sensor the hard way. Few hours with a mate and a relaxed approach. It's just undoing stuff and moving some things to be honest.
Had the same problem with my C5/Z06. Turns out it was a wire grounding out on the frame. I had it fixed at a shop. After removing the passenger side seat, and most of the rear interior. It was repaired;)
About the oil pressure sending unit you can use a swivel long extension and a 27mm deep socket and get it from back of the intake on the drivers side and buy one with a lifetime warranty from autozone. I bought a brand new delco one and it went out in less than two weeks.
My 2004 C5 does the exact same thing with the turn signals. I did see a RUclips video about correcting “hyper flashing” & it involves ordering a hyper flash kit from corvette envy. The cost of the kit is less than $50, takes about an hour to install the kit.
All those lighting issues might stem from an LED bulb in the parking light front (just one) that was not properly resisted. Replace with OEM bulbs in the front parking lights.
I have a 1990 C4/C5 conversion with a non-stock engine (roller cam, etc). Which is only relevant because the transmitter on top of the engine blew and dumped its oil over the engine. Fortunately it happened near a garage and replacement was uneventful. I haven't had any problems since though the analog gauge pegs when cold.
My 98 has been a constant stream of minor issues. In the past 2-3 months that I've owned it I've:
Replaced both air check valves
Cleaned the throttle body
Replaced the air filter
Fixed both seats from sliding around
Replaced a bunch of interior bulbs
Had the harmonic balancer replaced
Changed both belts
Changed another pulley
Replaced the blinker
Buffed out scratches
Replaced washer fluid sensor
And there's still a list of things I haven't gotten around to but I do love this car and it is still incredibly solid and runs damn good
As a C5 owner, if you're going to be fixing the flasher and putting in clear lenses up front, go ahead and get the hyperflash kit and put switchbacks and all LEDs in. It's so much brighter, plus LEDs in your backup lights will keep you from turning them brown from the heat.
at least it wasnt major stuff. those are just small issues. I'm looking into getting a C5 as well. as long as it runs good everything else is minor to me.
At 6:20, the left knob adjusts the digital temperature setpoint and is free to rotate, the right knob doesnt show any temperature on the LCD display, and I am not really sure how much of an effect it has on the passenger's temperature! But the knobs are funtioning correctly.
The hyper flashing is prolly because someone put an led bulb on that driver side. Its prolly the bulb on the front turn signal that's why it looks different. U need that lmk55 or whatever it is hyper flash harness. It's easy to install
I agree with this. My C5 turn signals were intermittent. Put in the hyper flash harness and they are perfect now.
Oh search you tube to help you find all the grounding points on the c5 frame they will need to be cleaned up a little to ensure all your electric stuff works properly. Also get that yellow top battery it’s excellent for corvettes. I also upgraded my wiring to the big three with a heavy duty 600 amp alternator helped with that pesky stability traction control light. If you wanna keep that light out brake a little aggressively it needs some exercise.
Mine ecbm needs repair. Comes on sometimes and sometimes not, only when uh ou get on the throttle
I was looking at one for $8,000 with 170,000 miles on it. Manual, convertible. From a dealer. They said it had new cats and tie rod ends. I drove it around and it seemed pretty straight.
Hey the turn signal acting goofy could have something to do with the front turn signal marker light. You already are daying they are different brightness.
Your flasher problem is the exact same issue that I have with my 2013 f-150. Do you think it’s contagious 😷
My turn signals flash quickly also both of them. I haven't ever tried the flashers. Car is fun though. The worse thing about it is the outdated car stereo and it's a nightmare to change out....
Make sure your harmonic balancer pulley is running true, too. Consult Corvette Forum C5 Tech section if necessary.
I replaced the oil pressure sender without removing the intake because wiring, fuel lines and such make it complicated. More specifically, on my 02 with 80,000 miles, I changed the rocker cover gaskets first and that work gave me the impression that the wiring was stiff, maybe even brittle. I ended up drilling a 2" hole directly above the sender. Highly recommended as you don't want to cross thread the new sender into the aluminum block!
P.S. The old sender was not just pegged at 80 PSI, it was leaking, a lot!
I have a c5 2001 I paid $12,000 and it only needed a sway bar initially. The oil pressure sensors did go out last week and I also freaked out cause it showed 110 standing still and 130 in gear. I took it immediately to the shop never going above 30 mph to try to “save the engine” thinking it was a huge engine issue but I further researched the problem while waiting at shop and learned about the sensor problem. $195 later - car is back on road driving like a dream
I have two Chevies a Malibu and Impala with similar issues with the flashers. Must be a GM wide issue around that time
Make sure you get the LMC5 module your corvette steering column will get locked up, I got stranded because of it. 03 c5 z06
Check under battery for corrosion on wiring harness from battery acid leaks sir this leaks on main harness to computer can be a serious issue if not taken care of early enough
A have a 2000 but been having trouble with the column lock
I have an 01 Z51 w/ 111k, bought it 3 years ago with 96k - (it's a daily). Just wait until your ABS module takes a crap. I haven't fixed mine - so it's like I have competitive mode on all the time without ABS or traction control. Also my passenger window actuator and lock module do not work. Other than replacing the water pump and overflow tank. It's been mechanically solid.
Check the connector that is inside the rubber bootie that runs from the door to the jamb, containing the door wiring. Pop the bootie off at the jamb end and fish for the connector. Make sure it is seated well. There is one wire that may be partially exposed. Tape that up. Liquid tape is supposed to be really good on that. It is a serial network wire, and can really raise havoc if it touches anything. Same thing applies to the driver side.
All of these are pretty simple fixes. Remove the Intake to do the OPS. It's a 45 minute job, not including the cleaning you'll want to do. I would recommend not replacing the flasher in the dash and buying a 'hyper flash' harness. It's about 40 bucks and you'll need it when you do the LED updates anyway. It completely bypasses the flasher in the dash. I would guess that someone put an amber bulb in one side of your side markers. Also, the side marker sockets are prone to melt. It could be a ground issue. Replace the lens and put LEDs in and you'll be good. The sockets are readily available if you need to replace one. Not sure on the reverse lights, but I would guess a switch. Correct on the HVAC. Pull the control panel (great time to do the hyper flash harness) and resolder the back, Plenty of vids about it. I did it to mine. Easy fix. You have a $100 worth of repairs and about 2 hours in labor in front of you.
Replace the the hazard light switch, it's not too bad, had the same problem in my 01. Radio has to come out, bout an hour- 2 hour job. Good as new. Same with the OPSU remove the intake, I'd go ahead and stop at a parts store and get some new intake gaskets, also be careful with all the vaccum lines, they can be a real pain in the ass.
First the running lights are a problem… the sockets melt. This can cause the signal problem if the bulb is put in wrong. The oil pressure problem is the sending unit. The hazard switch goes bad. Finally, the eight resistors in the HVAC unit is the display problem. I’m an ASE CMAT and I’ve fixed all these problems on my C5 plus, many others. I hope this helps…
For a tune up is it expensive?
I have an '04 commemorative edition Z06. There are two types of harmonic balancers on these LS engines -those that are bad and those that are going to go bad. I have posted a video on RUclips addressing this issue "C5 harmonic balancer supplimental" which you may wish to review. -Richard Curtis
I purchased a 2002 black on black convertible corvette with 24,000 miles. I was the 2nd owner. Everything worked. It was spotless. I really enjoyed it. Plus great mpg and mph! Then I started having problems with the electronics. The Chevy dealers did not want to work on it. They told me it was too hard to fix given its age. $2,000 later it was still not fixed. I found a loose wire in the door and fixed it myself. The tire pressure system stop working. The shop wanted 400.00 to fix it. I did it myself for 50.00. My first oil change was 110.00. Nothing special about changing the oil and filter. I now change it myself. I kept it for 3 years. Be prepared, to buy a new set of tires every few years. Now I wish I had not.
Have a Fun New Year!
How come I can't find deals like this on Corvette and manual
Got to change my oil pressure switch, been driving like 2 months now, short rides, no problem
My 2002 Monte Carlo has the blinker problem too. Like exact same thing lol
What would yall guys recommend base model c5 or the z06? I was thinking of a c6 but I just like the more sleek design of the c5🔥.
I have an 04 Z06. I have also owned a base C5 04. If it is not a daily driver get a Z06. If you are daily driving it get a base.
The base I actually daily drove for over a year. I couldn't imagine doing the same thing with the Z06
@@andrewpeek6365 Why? Ride too stiff?
With the mileage you have please do yourself a favor and check the alternator pulley it’s a plastic resin/composite type with a steel hub and mine was slipping when I bought mine , was told it was failing and it was going to be changed by previous owner but I was itching to take it so I drove it home and it let go ...... thankfully in my driveway as I was backing in .... they supposedly last about 70-80,00 miles ... give the engine bay the once over and make sure the belts and pulleys are ok..
where in nh do you live I'm from the concord area
I own a 2001 C5 convertible that I bought brand new. I just addressed the flasher issue. The switch is a PITA to get out. In the end, I removed the flasher button, center console, left knee bolster, radio, and HVAC control unit to access the switch. The switch fits in a tubular pocket that is part of the center dash vent assembly, from the rear of the panel. In the end, I forced in a full sized .025 feeler gauge into the instrument panel along the top of the switch, between the switch and the 'tube', in order to release the retaining tab. I released the bottom tab by pressing it in with a small screwdriver via the top left of the radio compartment. Then I was able to push it toward the front of the car, and out of the pocket.After replacement, the turn signals worked every time, but flashed fast. Be prepared for this. Another reproduction switch did the same thing. (They are not available from GM anymore). The fix is installation of a 'hyperflash' harness. I recommend trying the signals and flashers BEFORE sliding the new switch into the instrument panel. Just in case....
Watch out for grounding issues too, if you encounter any strange electrical issues. Corvette Forum is your best friend in these instances. The C5 is a great car, enjoy it!!!
I got 2001 zo6 n the traction control light comes on , so we took it apart n resoldered the points of contact. N SHE WORKED N LIGHTS WENT BACK OUT!... another well known problem c5s have.
Put matching bulbs in the front and may change how they flash too
The Electronic Brake Control Module (EBCM) is problem prone on these too. If you haven't had the problem yet, you will. Messages like "Service Active Handling", 'Service Traction Control", etc. The problem is the solder joints deteriorate in the EBCM relay. It can be easily fixed if you have at least a reasonable skill level, and no need to buy a new or updated EBCM.
Silverado and Sierra of the same years have that problem with ebcm as well. Broken solder connectors.
Looks like someone replaced the front left turn signal with an LED bulb. this explains why the front left driving light is brighter and also why you have the hyper flash with your left turn signal on. I could be wrong though
MIND HAD SAME PROBLEMS I LIL MAD GENERAL MOTORS KNEW ABOUT ALL LIL PROBLEMS THIS IS MY 3 VETTE I LOVE MY C 5
I had the problem with the climate control screen and sending it out was like $50 much better than doing the soldering yourself. You can get into a lot of trouble trying to save $50. You don't have to remove the whole center console, just unbolt and move it back a little to get the dash plate out.
wow not bad, I paid $8000 for a vette with 160k miles... yours may have been a better deal lol. I've already had to fix a lot of issues on mine. All of the issues you explained I had the same and more and fixed them all. The oil pressure one was the hardest fix because i used a weird long tool to fix it, my tail lights were even worse and had a hack job wiring in the back, but i also had to replace the hazard switch. The resoldering to fix the screen wasnt too hard, it was very repetitive so once you got down 1 or 2 of them the rest was easy.
Flasher problem is associated to the wrong bulb in the front left
Don’t freak out about “too much oil pressure” because the stock oil pump relief spring opens at 55psi.
Happy with my C5 but the memory function does what it wants with radio stations and mirror positiin.
I have a 2003 Corvette 50 anniversary Corvette after 21 years have problems with it that is my dream car if I had to I could write a book on the things I had to repair. on my Corvette
The flasher will fix that issue. I had the same issue in a different Chevy.